JTextField1.toString() has no "text="

Instances of JButton, JLabel and JTextField all have a getText() method. However, the following produces strings containing the text for JButton and JLabel, but not for JTextField (see below). Why would that be? There are occasions when it would be useful to check what the text was, for example when using event.getComponent().toString(), but it is not there for JTextField.
System.out.println("" + jButton1.toString());
System.out.println("" + jLabel1.toString());
System.out.println("" + jTextField1.toString());
javax.swing.JButton[,12,446,98x26,alignmentX=0.0,alignmentY=0.5,border=
javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@e2eec8,flags=
296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,
left=14,bottom=2,right=14],paintBorder=true,paintFocus=true,pressedIcon=,
rolloverEnabled=true,rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,
text=jButtonAAA,defaultCapable=true]
javax.swing.JLabel[,12,478,58x16,alignmentX=0.0,alignmentY=0.0,border=,
flags=8388608,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,
disabledIcon=,horizontalAlignment=LEADING,horizontalTextPosition=
TRAILING,iconTextGap=4,labelFor=,text=jLabelBBB,verticalAlignment=CENTER,
verticalTextPosition=CENTER]
javax.swing.JTextField[,12,500,83x20,layout=javax.swing.plaf.basic.
BasicTextUI$UpdateHandler,alignmentX=0.0,alignmentY=0.0,border=javax.
swing.plaf.BorderUIResource$CompoundBorderUIResource@aa9835,flags=296,
maximumSize=,minimumSize=,preferredSize=,caretColor=javax.swing.plaf.
ColorUIResource[r=51,g=51,b=51],disabledTextColor=javax.swing.plaf.
ColorUIResource[r=184,g=207,b=229],editable=true,margin=javax.swing.plaf.
InsetsUIResource[top=0,left=0,bottom=0,right=0],selectedTextColor=javax.
swing.plaf.ColorUIResource[r=51,g=51,b=51],selectionColor=javax.swing.
plaf.ColorUIResource[r=184,g=207,b=229],columns=0,columnWidth=0,command=,
horizontalAlignment=LEADING]

I'm not sure I understand "commonly permanent". All
three can be easily changed (and often are changed).This is not true in my experience. Button text is and should be
relatively static. The same is true of labels. I respectfully submit
that if this is not the case, you have UI design issues you need to
address.
The getText() method is not available in the example
I showed (evt.getComponent()) which I am trying to
use to identify which component from within a custom
bean an event is coming from. It works for JButton
and JLabel but not for JTextField. Probably there is
a more elegant way of doing this, but I haven't
figured it out.If you're trying to identify a component based on the text it
contains, you need to rethink your design.
If jTextField1.toString() doesn't show the "text="
field, then it really isn't converting all of
jTextField1 to a string.The API makes no such promise. The API promises it will return
"a string representation of the object." There is no guarantee of
completeness.

Similar Messages

  • My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    Basic Troubleshooting Steps when all else fails
    Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
    Relaunch the App and try again.
    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • How to find out which vendor has PO text

    I would like to pull out info about vendors and need to know which vendor has PO text, without of course having to check them one by one.
    is there any way i can see that? tables? text id??
    thanks
    Alisa

    Go to SE75 and Select EKKO or EKPO
    and Double click the EKKO or EKPO and Note the Text id..
    Then go to SE16 > STXH and enter Text ID..
    then execute , you will see the PO numbers for which the text id is maintained in 'Text Name' Column
    From EKKO table you can find the Vendor for the above PO's.

  • Is it possible to make an iphoto book that has all text on a page?  I want to have some pages with mostly text.

    Is it possible to make an iphoto book that has mostly text on some of the pages?  I would like to make a book that has more text than photos on some pages.

    Of course (at least in some themes - travel for sure) - have you looked at the available layouts?
    LN

  • How to OCR an image embed in a pdf page that already has some text?

    I have a pdf page that has both texts and an image on it. I can not run OCR on the whole because I see the following error message.
    Acrobat could not perform recognition (OCR) on this page because: This page contains rederable text.
    Is there a way to limit the OCR only on the image but not the whole page?

    The only way to OCR on the page would be to save the page (or the PDF) as a set of TIFF files (the set is created automatically). Then open the TIFFs in Acrobat (drag and drop works best). You can then OCR the result that is pure graphics. If there is anything other than a pure graphic on a page, Acrobat will not OCR.

  • IPhoto is has a text window that opens that says "BASH"

    When I attempt to open up my iPhoto is has a text window that opens and says "Last login: Thu Feb 26 20:59:01 on ttys000 Brents-MacBook-Air:iPhoto Library.photolibrary brentthomas$"....I am a little nervous to where my photos are at. Anyone know whats going on? Trying to backup my iphone 6 to my macbook air.

    "Last login: Thu Feb 26 20:59:01 on ttys000 Brents-MacBook-Air:iPhoto Library.photolibrary brentthomas$"...
    Try the following:
    Select your iPhoto Library in the Finder. By default it should be in your Pictures folder.
    Use the command "File >Get Info" or press the key combination ⌘I
    In the Info panel, that will pop up click the disclosure triangle for "Open with" and set this to "iPhoto.app".
    Click the "Change All...." button as well.
    This will change the document type of your library to be opened by iPhoto.

  • Syntax for identifying Area Text which has overset text

    Is there a way to identify if the Area Text box has overset text using Applescript? if yes, can some one let me know the syntax please.
    Thanks in advance
    Jaim

    Hey Carlos,
    Thanks for pointing me to the right post which has given me some solution. Though there is no direct method, solution given in the post really helped me out.
    set testLength to length of lines of text frame 1 of document 1
    Above AS statement will only count characters that are visible, this does not include overflowed characters.
    Thanks to Ten A for the work around.
    Thanks to Carlos for pointing me to the right post
    Best Regards
    jaim

  • On click of lov new jsp page which has only text area for adding comment

    hi all ,
    please help me to do this task. on click of lov new jsp page should be opend which has only text area for adding comment and upon clicking submit on the jsp page the value entered on the textarea should fall on the text field of lov.
    with regards
    prabhakaran.p

    The only reason I see for such a requirement is "Notes" require more space for entering a detailed note and would be inconvenient to write it in small single-line text input box. But, still in this case, getting the entered text back to the page and displaying it will have the same inconvenience of reading it from that field. And, I still think that removing one amongst the two (text field or image link) would be good, design wise.
    Anyway, did u try the following:
    1. Add a flow layout to the table bean
    2. Add text input and image item to the flow layout.
    3. Attach the notes page as the destination uri for the image.
    Did u start the working on it, let us know how far did u reach so that we can guide you through from that point.

  • My iPhone 4S has stopped texting a single number.

    My iPhone 4S has stopped texting a single number. I can receive texts from that number (a Samsung 3S) and I can call it, but can't send texts anymore. I don't get error messages - the texts just never arrive. Neither phone updated recently, neither number is blocked on either phone and I have tried resetting my network settings. No other numbers are affected.
    Help.

    Have you tried resetting all phone settings? Go to Settings - General - Reset - Reset All Settings.

  • How do you open a picture that has had text added using software such as Windows Photo Gallery?

    How do you open a picture that has had text added using software such as Windows Photo Gallery?

    In Editor, go to File menu>open, and point to where the photo file is on disk.

  • Has the text been sent?

    imessage failed to send, so the phone sent it as sms (its turned green).
    there is the message 'sent as text message' below the text but there is also an error message next to the text saying it has failed and do I want to resend?presume this is an error about the iMessage not sending?
    has the text been sent in any form?! don't really want to send it twice!

    Your message has been sent.
    When imessage is unavailable it will send it as an SMS.
    about message http://support.apple.com/kb/HT3529

  • Universal worklist second column "!" has short text "Escalated

    Hi All,
    In universal worlist the,
    first column is "Subject" which shows the workitem text.
    second column is "!" this has short text "Escalated". This column is for what purpose. Can some some one explain me on this.
    Thanks & Regards,
    H.K.Hayath Basha.

    This is only used for collaboration task.
    As I said before "escalated" is just a special status of a task, with no further consequences. It is just displayed differently (more prominent) in the UI.
    Forwarding is something completely different. When you forward a task, the person you forwarded to completely takes over the task. You cannot do anything on this task anymore. You can only see, that you have forwarded this task to someone else (Dropdown: Forwarded Tasks).

  • ITunes 11 has no text!

    One of my computers is running Windows XP.  I installed iTunes 11 the other day, and there's no text anywhere. See the images for what I'm talking about. I can't really do much of anything because of this bug.   This is the computer I use for putting podcasts and such on my phone and iPad so I kinda need it to work.  I still have the installer for iTunes 10.7 and at least that worked right.
    I Googled and searched communities but I seem to be the only person on Earth with this particular problem.  I found others talking about changing themes and having black text on a black background but as you can see that's not what I've got.  At this point an error message would be comforting.  It seems to work as far as I can tell, I'm just flying blind.
    What I assume is the phone synch screen....
    Podcasts....   Music is about the same; album art but no text.

    Alrighty.   I uninstalled all fonts except for the ones Windows wouldn't let me, presumably because the OS uses them while running.
    (Arial Black, Franklin Gothic, Goodfellow, Microsoft Sans Serif, Modern, Script, Tahoma, Tahoma Bold)
    Then I reinstalled the removed fonts from my copy folder.   Then I rebooted.   This didn't do a lick of good.  Probably because that's not the problem OR because the problem lies with one of the fonts listed that I couldn't remove.  (If it is a registry problem of a basic system font, wouldn't I notice missing text in other apps and software or even in the OS itself??)
    It would make sense for Apple to use a system font that every Windows user has.  So if one of these fonts is the one that iTunes is shagging, I don't know what to do about it.
    Oh, wait, yes I do.  Install iTunes 10.7 and get on with life.   I sure am happy I keep previous versions of install wizards.  This is exactly why.  LOL
    I'm willing to try again if anyone has other options.  But next week I'm going to want a backup of my phone so I can restore to my new one. 
    Mike

  • My HP Color LaserJet CP1215 has colored text quality problems

    My printer was working fine, but in the last month, I have been unable to correct a printing issue, which involves colored text that double prints or is blurry, it looks like it has a shadow mostly any color has a red shadow.  I have replaced all the cartridges, checked to make sure the tape was pulled off all and performed a cleaning, and all tests I could find or had access to.  I am beyond frustrated and am ready to throw it out the window.  Does anyone have any solutions?

    Don't quit keep with it, I almost quit because I was getting mad.  They kept harping on changing paper, changing paper.  My paper had sat in it for some time in a room where temperature changes was up and down.  The paper could have dried out to much or may have gotten moisture in it from the temperature changes.  I know it sounds crazy but change the paper with fresh paper along with calibrating it 3 or 4 times and see if you get different results.

  • How do can I have the form fill in a check box if the user has entered text in a textbox?

    I have a form that is submitting an xml data file that is picked up by MS Word and used to populate a document. However, there's a 'Miscellaneous' field where the user can type in addtional information that would not drop easily into the Word document (exceptions, items not on the drop down lists, etc.). I'd like to test to see if that Miscellaneous field has infomation in it and if it does, to set a invisible checkbox to "1" so that I can insert a text message in the Word document that there's additional information in the .pdf form that will have to be addressed manually in the Word document.
    I've tried
    if(Misc.rawValue !== "")
    otherinfo.rawValue = 1;
    but while it doesn't generate a Javascript error, it doesn't set the value either, and I haven't found any function that checks for whether a field is empty. I'm sure there's got to be a way to do this, but I'm stumped. Any help greatly appreciated!
    Bill

    It appears you are using LiveCycle Designer, so you will have to use the syntax of FormCalc or LiveCycle Designer JavaScript.
    For FormCalc:
    if(HasValue(Misc)) then
    otherinfo = 1
    else
    otherinfo = 0
    endif
    For JavaScript
    if(HasValue(Misc.rawValue))
    otherinfo.rawValue = 1;
    else
    otherinfo.rawValue = 0;
    I added code to clear the check box if the user clears the field.

Maybe you are looking for

  • IPod Classic 160 gb not playing some songs..

    I got my iPod Classic last week, and everything was fine until I went to listen to the music on the iPod with my headphones not through my computer. One of my songs wouldn't start playing. So, I took the song off and re-added it back. That song start

  • Mac as a router

    I know how to setup my mac as a router. Given the fact that my macbook is connected to the ethernet. However, is it possible while my mac is connected to a router (via Airport) and at the same time share my internet to other computer via airport as w

  • [SOLVED] Pacman -Syu, Download Only

    Hello, I've searched the man page but found nothing about this. My ISP has traffic limits and has HappyHours at night, so I'd like to download the possible upgrades with a cronjob but pacman doesn't seem to have a flag for that, like --download-only

  • I know this has been posted before. - Deleted but it dosnt help me.

    Hi there guys In a flurry of activity my GF deleted my isync while we are on holiday, I am a bit stuck I know there is a way to get Isync to work using pacifist and the install DVD. However my phone is pretty trashed and looking like it is gonna pack

  • How to Mute audio when capturing

    Does anyone know how to mute the audio when capturing HDV. The preview check box is only available when capturing dv. I'd like to be able to use the computer's sound for other things while capturing