Jump to next record when current record blocked

Dear all,
I have a problem with my oracle forms on the trigger WHEN-VALIDATE-ITEM.
i used that trigger to validate records...if i have a record status "sealed" i want that record wont show up.
here is my script:
if :documents.court_case_number is not null then
          case_id:=court_admin.case_read_pck.CcntoCasId(:documents.court_case_number);
          select sealed into cs_seal from cases where id=case_id;
          if cs_seal='D' then
               message('court case: '||case_id||' status seal: '||cs_seal); <-- if status "D" mean : sealed >> i want to just skip that record and jump to next record, i need help the script for this stage
          else
               return;
          end if;
     end if;
thank you

Hadi Wijaya wrote:
Dear all,
I have a problem with my oracle forms on the trigger WHEN-VALIDATE-ITEM.
i used that trigger to validate records...if i have a record status "sealed" i want that record wont show up.
here is my script:
if :documents.court_case_number is not null then
          case_id:=court_admin.case_read_pck.CcntoCasId(:documents.court_case_number);
          select sealed into cs_seal from cases where id=case_id;
          if cs_seal='D' then
               message('court case: '||case_id||' status seal: '||cs_seal); <-- if status "D" mean : sealed >> i want to just skip that record and jump to next record, i need help the script for this stage
          else
               return;
          end if;
     end if;
thank youDefine Skip!! When?? during navigation, Query??
You are using WHEN-VALIDATE-ITEM trigger to validate records????
If you want the records that are "sealed" to be excluded from your query, you can set the block's either DEFAULT_WHERE or ONETIME_WHERE clause programatically using SET_BLOCK_PROPERTY.
Explain your requirements more clearly so we can help you.
Tony

Similar Messages

Outlook 2013-Open Next Message when current message is closed

I have a user who said that in previous versions of Outlook she was able to double click on an email (to open it in its own window) then close it (not move or delete) and the next email in line would open up in its own window. I cannot find where this would
be setup at. I maybe assuming that a special rule was setup, but can that be done?
I have the "After moving or deleting an open item" set to "Open the next item." I even tried having a search folder filter out only new messages, which would I thought trick Outlook into thinking the message moved so it open the enxt
item, but no dice.
Any ideas how I can make this happen?

Hi,
The setting of “After moving or deleting an open item: open the next item” is only working when users move or delete the open item. It doesn’t work if you just open and close the item in Outlook. Here is an article descripted the details about it:
http://www.msoutlook.info/question/217
If you want to open next item in current open item, we can add a Quick Access Toolbar of Next Item in Outlook as a workaround.
Thanks,
Winnie Liang
TechNet Community Support

Cursor Jumping to last record when query mode for Multi-record block.

I have a multi-record block. the seq field has this validation to check that there should not be a gap
in sequence for S_type and cer_dl field.The program unit is as below.
PROCEDURE seq_validation IS
--Validation to check that there is no gaps in sequence for S_TYPE and cer_dl fields
l_value_to_check varchar2(100);
l_seq_found number;
l_curr_sequence number;
l_new_value varchar2(100);
l_found boolean:=FALSE;
l_new_set boolean := FALSE; --s_type and cer_dl are different from previous set.
begin
if trim(:b1.s_type) is not null
or trim(:b1.cer_dl) is not null
then
-- Program continues here only if all the items are not null
-- Get information from record that needs to be validated
l_value_to_check := trim(:b1.s_type) || ':'|| trim(:b1.cer_dl) ;
l_curr_sequence := :sequence;
if :SYSTEM.CURSOR_RECORD = '1' then
---to check sequence is entered as 1 in the first record
message('Error:Sequence should start with 1');
raise form_trigger_failure;
end if;
go_item('b1.XYZ');
else
FIRST_RECORD;
while :SYSTEM.LAST_RECORD != 'TRUE'
loop
l_found := FALSE;
l_new_value := trim(:b1.S_type) || ':'|| trim(:cer_dl) ;
if l_new_value = l_value_to_check then --
l_new_set:= FALSE;
l_seq_found := :seq;
if l_seq_found >= l_curr_sequence then
go_item('b1.seq');
l_new_set := FALSE;
elsif l_seq_found < l_curr_sequence - 1 then
go_item('b1.sequence');
l_found := FALSE;
elsif l_seq_found = l_curr_sequence - 1 then
l_found:= TRUE;
go_item('b1.xyz); --go to next item
end if;
else
l_new_set := TRUE;
end if;
NEXT_RECORD;
end loop;
if l_new_set then
go_item('b1.xyz'); -- go to next item
else
if not l_found then
message('Error:Sequence should be in order.');
go_item('b1.seq');
raise form_trigger_failure;
end if;
end if;
go_item('b1.xyz'); ---go to next item
end if;
end if;
end;
In the insert mode its working fine(unless you gurus feel to change to make it more perfect.
When I say enter-query and put 'IAS' in the s_type field and then do a execute query it brings all the records of 'IAS'.
Now as I want to update the records, and when I navigate across field(s_type,cer_dl,Seq,xyz) using tab and move the cursor down on second
record(IAS N 2 N), what happens is when I navigate to sequence field the cursor jumps to LAST RECORD( IAS Y 3 N ) of LAST field XYZ.
I am putting the sample record
s_type cer_dl seq xyz
IAS N 1 N
IAS N 2 N
IAS N 3 N
IAS N 4 N
IAS Y 1 N
IAS Y 2 N
IAS Y 3 N
The cursor moves to last record --IAS -Y -3-N when I tab across the second record.

When I say enter-query and put 'IAS' in the s_type field...For your validation to work you must not allow users to enter records in the middle of a block, clear records from the block or query specific records. If you allow the users to enter a query then you are allowing 2 of the rules to be broken.

Get next value in a Multi Record Block

Hi,
I've a Multi Record block with 2 items like below.
pos width
1 7
8 5
13 5
18 2
ie pos in next item is sum of pos and width of previous item.I've already implemented this.
The problem is if the user changes width in a particular record,I want to change next records pos automatically.
To achieve this,I wrote a when-new-record -instance-trigger as follws:
if :system.cursor_record=1 then
:pos:=1;
elsif :system.record_status='changed' then
:pos:=:pos+:width;
end if;
but even Though I change column width of block,:system.record_status still remain 'INSERT'.
Pls can u pls tell me how can I acheive this?
Prashanth Deshmukh

You cannot use Record Status like that.
You need to create a procedure that loops through your entire block, keeping track of the pos and width of the prior record to calculate the new pos of each record.
Your procedure would need to do something like this:
Declare
    v_Pos pls_integer := 1;
Begin
Go_block('B1');
First_Record;
Loop
    Exit when :System.record_status='NEW';
    :B1.pos := v_Pos;
    v_Pos := v_Pos + :B1.width;
    Exit when :System.last_record = 'TRUE';
    Next_Record;
End Loop;
First_Record;
End;

How can I modify one column of current and next record depending of some criteria?

Having DDL
CREATE TABLE #ServiceChange(
[ID] [int] identity(1,1),
[SHCOMP] [char](2) NOT NULL,
[SHCRTD] [numeric](8, 0) NOT NULL,
[SHCUST] [numeric](7, 0) NOT NULL,
[SHDESC] [char](35) NOT NULL,
[SHTYPE] [char](1) NOT NULL,
[SHAMT] [numeric](9, 2) NOT NULL,
[CBLNAM] [char](30) NOT NULL,
[GROUPID] [char](2) NULL
And original and desire data in below link
https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
The criteria is:
Type should always flow F->T
if current abs(amount)> next abs(amount) then groupid = 'PD'
if current abs(amount)< next abs(amount) then groupid = 'PI'
there is no case when those amounts will be equals
where current(custid) = next(custid) and current(service) = next(service) and groupid is null
Any help will be really apreciated.
Thank you

I tried that and got this error
'LAG' is not a recognized built-in function name.
You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
; WITH numbering AS (
   SELECT groupid,
rowno = row_number() OVER (PARTITION BY custid, service ORDER BY date, id)
   FROM   #ServiceChange
), CTE AS (
   SELECT a.groupid,
CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
   WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
END AS newgroupid
   FROM numbering a
   JOIN numbering b ON b.custid = a.custid
AND b.service = a.service
AND b.rowno   = a.rowno - 1
UPDATE CTE
SET   groupid = newgroupid
Erland Sommarskog, SQL Server MVP, [email protected]

How to get Value of a item of first record when current record is second

How to get Value of a item of first record when current record is second in Form6i ?
get_item_instance_property dose not allow to get value.

Gerd,
You're right, there are several other triggers that must be coded, but I was responding to Steve's statement about Inserting or deleting records from the multi-record block. For the record, I use the following to manage a Record Group:
* When-New-Block-Instance - Initialize the RG
* block Post-Query - populate the RG
* When-Create-Record - add new record to RG
* When-Remove-Record - remove record from RG
* block When-New-Item-Instance - capture previous value of the item or row
* When-Validate-Item - Item specific Insert, Update, Delete of values in the RG
There are a few other places as well, but these are the minimum. It might seem like a lot of code, but then again, I don't use this solution for every multi-line block. Like all tools, you use the right tool for the job. :-)
Craig...

Web Form Hangs When Scrolling through Multi-Record Block

Hello!
I have a web-deployed form that uses the Sun Java JVM and utilizes WebUtil.
We are using JDK v1.4.2.
When I open this form using the Java plug-in and try to scroll through a multi-record block ... it will hang at various points and eventually I have to close the form because it won't respond.
This does not happen if I simply access the form through the Microsoft JVM.
Any suggestions?

That's a know solved bug. You must install AS10g patchset 9.0.4.2.
For me it solved the problem.
Bug 3557904: Forms hangs (deadlocks) when scrolling on XP under some circumstances
Joao Oliveira

Need to set attribute of current record based on value in next record

Using Forms 6, I have a form showing a list of records. There can be multiple records with the same ID but having different expiration dates. I need to set attributes to hilite only the record with the latest expiration date. The current list hilites the records with future expiration dates-but we've found that sometimes the subscription is renewed before the old expiration date has been reached, resulting in two records with the same ID having expiration dates in the future.
I can (and do) sort the records by ID & expiration date so the record with the latest expiration date is always the last one for that ID, so what I want to do is check the next record to see whether or not it has a different ID. If it does then the current record has the latest expiration date & should be hilited. Since I might need to hilite the current record I can't simply navigate to the next record which, from the description I've found, is what the next_record builtin does. Does anybody know how I can check a value in the next record without making it the current record?
Thanks.

The database is 10g but I've never heard of the LEAD function before. Now that I've read about it it sounds like I can check the next record using the following:
LEAD(ID,1,0) OVER (ORDER BY ID ASC) NEXT_ID
But I'm not sure where to put this. Maybe create a control item & load the value in the POST-QUERY trigger? I'll give this a try but if you have a suggestion I'd be glad to hear it. Thanks. On second thought I don't think selecting the next ID in the POST-QUERY trigger would work as that would require a complete select statement which would start at the top of the list each time, I think.
Bugger. I can do it in SQL-Plus but I can't see how to incorporate it into the form.
Edited by: user6931915 on May 18, 2011 11:09 AM

Enabling the current record only in a multi record block..how?

Hi,
I'am trying to enable a single record in a multi record block.
If i use SET_ITEM_PROPERTY it enables all records, SET_ITEM_INSTANCE PROPERTY does not have ENABLED Property.., so how to go about this?
I have a check box beside each record, if i check the check box only that record should get enabled..is there any way?
Regards
Mahesh

I found out the answer :
technical note 661 on on Siebel Supportweb (metalink3) :
"how to embed OBI requests in Siebel Business Application views, so that navigating among the records in the parent applet updates the child Analytics applet with context-appropriate content"

See my problem no master record move to next record

hi master
sir
i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
for new record in detail
in detail blick post-block or post_record or post_insert event i write this code
go_block('masterblock');
next_record;
go_item('detailblock.item');
but not responses no master block move to next record still and my curser sitll in last postion
sir how i move master record after save the detail record and jump to detail block for new record
please give me idea or code
thanking you
aamir

thank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir

Check duplicate data entry in multi record block,which is a mandatory field

Dear all,
I have a situation where i have to check duplicate data entry(on a particular field,which is a mandatory field,i.e. it cannot be skipped by user without entering value) while data key-in in a Multi Record block.
As for reference I have used a logic,such as
1>In a When-Validate-Record trigger of that block I am assigning the value of that current item in Table type variable(collection type)
as this trigger fire every time as soon as i leave that record,so its assigning the value of that current time.And this process continues
then
2>In a When-Validate-Item trigger of that corresponding item(i.e. the trigger is at item level) has been written,where it compares the value of that current item and the value stored in Table type variable(collection type) of When-Validate-Record trigger.If the current item value is matched with any value stored in Table type variable I am showing a message of ('Duplicate Record') following by raise_form_trigger failure
This code is working fine for checking duplicate value of that multi record field
The problem is that,if user enter the value in that field,and then goes to next field,enter value to that field and then press 'Enter Query 'icon,the bolth Validate trigger fires.As result first when-validate record fires,which stores that value,and then when-validate-item fires,as a result it shows duplicate record message
Please give me a meaningful logic or code for solving this problem
Any other logic to solve this problem is also welcome

@Ammad Ahmed
first of all thanks .your logic worked,but still i have some little bit of problem,
now the requirement is a master detail form where both master and detail is multirecord ,where detail cannot have duplicate record,
such as..........
MASTER:--
A code
A1
A2
DETAIL:--
D code
d1
d2 <-valid as for master A1 , detail d1 ,d2 are not duplicate
d2 <--invalid as as for master A1 , detail d2 ,d2 are duplicate
validation rule: A Code –D Code combination is unique. The system will stop users from entering duplicate D Code for a A Code. Appropriate error message will be displayed.*
actually i am facing a typical problem,the same logic i have been applied in detail section ,its working fine when i am inserting new records.problem starts when i query,after query in ' a ' field say 2 records (i.e. which has been earlier saved) has been pasted,now if i insert a new record with the value exactly same with the already present value in the screen(i.e. value populated after query) its not showing duplicate.................could u tell me the reason?and help me out...............its urgent plzzzzzzzzz
Edited by: sushovan on Nov 22, 2010 4:34 AM
Edited by: sushovan on Nov 22, 2010 4:36 AM
Edited by: sushovan on Nov 22, 2010 8:58 AM

How to do it in multi-record block

Hi all,
i have 1 text items in a multi-record block number of record displayed 10
and i have values like 100 , 50, 30 in first 3 records and in 5th record i want to put some value like
20 then i want to calculate all values like 100 + 50 + 30 +20 = 200 and i want to put the total value in a single record block.
but my problem is i cannot able to calculate all the value because for the totale value i have to
write a for loop to loop through the record
but go_block() is not working in post_change .
if any solution is there plz suggest.......

Hi zeeshan
my problem is i cannot able to calculate all the value because for the total value
put the total value in a single record block.
First pls the following...
Guidelines for Working with Calculated Items Calculated items_
1- They are display-only control items.
2-Calculated items cannot be database items.
3.While you can set a calculated item's Enabled, Mouse Navigate, and Keyboard Navigable properties to Yes,
you cannot set the Insert Allowed or Update Allowed properties to Yes
Second Keyword: TOTAL is a reserved oracle key word... pls read the Details...
go_block() is not working in post_change .well u can use timers but no need for it u can reference block item but first u have to accumulate the values per record in WHEN-VALIDATE-ITEM TRIGGER in the last calculated item which is inserted by the user and assign it to the display item in ur current multi-record block :*block_name.total_item*.. as follow...
:block_name.total_item := :item1 + .... ; Then u create a second display item > no of records property = 1 , named e.g. final_summarized_totals
In order to summarize this total values accumulated in the multi-record display item named e.g. block_name.total_item
Finally using PRE-INSERT , PRE-UPDATE,PRE-DELETE Triggers to assign the value calculated into the display item * block_name.total_item* into the db_item into the previously mentioned Trigger Block-Level Off-course.
:block_name.total_db_tem := :i:block_name.final_summarized_totals ; Hope this helps...
Regards,
Amatu Allah

How can I create a loop in a multi-record block (on the background)

I have a multi-record block.
In one item I change a value.
Upon this change, in the when-validate-item I would like to
change other records in the same block.
I planned to loop the block with go_record and to do my things
in each record. Unfortunately the go_record built-in is
restricted and cannot be used in a wvi-trigger.
Another approach can be to update the records in the database
and to perform an execute_query after this change. Also this
procedure cannot be used in a wvi.
How can I easily loop in a multi-record block???

You can try to put loop with go_record in KEY-NEXT-ITEM on that
field.
Or if you change something and then press KEY-COMMIT you can
update another records in database and after commit do again
execute_query. Something like :
on KEY-COMMIT:
update_another_records;
commit_form;
execute_query;

How to implement JSF text input down-arrow key = next record navigation?

Hi All,
I've got a small query which you experts might be able to help me through. I would not be surprised if such questions would already have been raised in this forum.
Formerly, I've created an Oracle Form that allow user to quickly insert data in bulk. It only has three 3 fields - first name, second name and address. Because of the flexibility of the Oracle Form, by pressing the down arrow key, user is able to create record when the last record is detected. And vice versa by hitting the up arrow key, it will move to the previous record when the current record is not the first record. So basically, the form is very 'key-driven' and without the use of the mouse, a lot of data can be inserted very quickly and efficiently.
I've successfully converted such form to an ADF BC JSF page using the JHeadstart toolkit. But when I showed it to my users for comment, they were really disappointed with the number of mouse interactions they need to click every time to navigate between records as well as creating new records. My question is can I build some sort of ADF JSF event handler on any of the text items to perform the following tasks:
1.) When 'down arrow key' is pressed AND not the last record THEN
Go to the next record.
2.) When 'down arrow key' is pressed AND is the last record THEN
Go to the next blank record.
3.) When 'up arrow key' is pressed AND not the first record THEN
Go to the previous record.
4.) When 'up arrow key' is pressed AND is the first record THEN
Do nothing.
If all the four above tasks are achievable in ADF JSF, can you please guide and brief me on the steps to implement them. Or these functionalities are already available somewhere in other open source toolkits. Your help is much appreciated. Thank you and have a nice day.
Kind Regards,
John

Hi Steven,
I've tried to incoporated attached link's codes with the JHeadstart generated code inside the jspx but I still cannot get it to work. There is a lot of Javascript error and is impossible to debug.
Regards,
John

Trap error within loop and process next record

Hi,
I am processing each record inside a loop. Now if any exception occurs processing with a single record within loop I want to continue with the next record with proper error message in the log.
How to achieve the above scenario? Shall I create a savepoint and whenever any error occurs inside the loop I will rollback to that savepoint. Once it is done shall it process the next record automatically?
Thanks in advance for your reply.
Thanks,
Mrinmoy

Relational databases are about sets.
They are not about files and records
Processing records in a loop will make your code slow, and you should avoid using this strategy.
That said
Simply enclose the code in it's own begin end block.
beginn
<your code>
exception
when <your exception> then
<process the exception not reraising it>
end;
No savepoints required.
Sybrand Bakker
Senior Oracle DBA

Jump to next record when current record blocked

Similar Messages

Maybe you are looking for