Jumpstart flash_install profile doesn't work

I have created a jumpstart server using flar images (flash) as source to install/clone servers as solution for backup of solaris install data from rootdg (using VxVM). All configs was done:
* sysidcfg
* rules.ok (after execution of ./check script)
* profile
* add_install_server
* add_install client (only one client until now - test phase)
The problem occurs when after net boot from jumpstart client (boot net - install), the suninstall open interactive window asking for configuration data (install from cd ou flash archive, boot disk, partitioning, packages, etc). The first part of Identification of installed server semmes to be ok (in this case sysidcfg). I want to do a restore of server completely unnatended so this situation doesn't help me.
I just tried everything and the instalation but the behavior it's the same.
What is wrong ???
Follow the config files:
BOOTPARAMS (created by add_install_client)
# cat /etc/bootparams
<CLIENT> root=<SERVER>:/var/tmp/cd/Solaris_9/Tools/Boot install=<SERVER>:/var/tmp/cd boottype=:in sysid_config=<SERVER>:/jumpstart/config install_config=<SERVER>:/jumpstart/config rootopts=:rsize=32768
TFTP BOOT enabled at inetd
# grep -i tftp /etc/inet/inetd.conf
# ftp telnet shell login exec tftp finger printer
# TFTPD - tftp server (primarily used for booting)
tftp dgram udp6 wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot
RARPD listening
# ps -ef | grep arp
root 26423 1 0 fev 05 ? 0:00 /usr/sbin/in.rarpd -a
Config, Image and Install File Systems SHARED (nfs daemons OK)
# share
- /var/tmp/cd ro,anon=0 ""
- /jumpstart/images anon=0,root=srdflab02 ""
- /jumpstart/config anon=0,root=srdflab02 ""
# ps -ef | grep nfs
daemon 12238 1 0 fev 05 ? 0:00 /usr/lib/nfs/statd
root 12242 1 0 fev 05 ? 0:00 /usr/lib/nfs/lockd -g 90
root 23596 1 0 fev 09 ? 0:00 /usr/lib/nfs/mountd
root 23598 1 0 fev 09 ? 0:11 /usr/lib/nfs/nfsd
sysidcfg
# cat sysidcfg
network_interface=primary {default_route=X.X.X.X protocol_ipv6=no netmask=255.255.255.0}
name_service=NONE
security_policy=NONE
system_locale=pt_BR
timezone=Brazil/East
timeserver=localhost
terminal=vt100
Profile
install_type flash_install
archive_location nfs localhost:/jumpstart/images/archive.flash
partitioning existing
rules
# cat rules.ok
hostname srdflab02 - srdf_class set_root_pw
# version=2 checksum=4591
Boot strings from Jumpstart
Searching for configuration file(s)...
Using sysid configuration file 10.114.128.90:/jumpstart/config/sysidcfg
Search complete.
The system is coming up. Please wait.
Begin system identification...
Starting remote procedure call (RPC) services: sysidns done.
System identification complete.
Generating software table of contents [this may take a few minutes...]
Table of contents complete.
Starting Solaris installation program...
Searching for JumpStart directory...
not found
Warning: Could not find matching rule in rules.ok
Press the return key for an interactive Solaris install program...
After that, a ENTER and I get a interactive window as explained.
Every in the config appears to be ok but, as a fact above, the client doesn't boot.
Only point of concern in the config is the fact that I used only 1st CD (Software 1/2).
Any suggestions? What is wrong?

Help !

Similar Messages

Jdev11g CPU profile and Memory Profile doesn't work for Mac

I'm running Jdev11g on Mac OSX 10.5.5,
CPU Profile and Memory Profile doesn't work. I got following message:
Error occurred during initialization of VM
Could not find agent library in absolute path: /Shared/jdevjavabase11110/jdeveloper/jdev/lib/profiler16.so
The file actually is there. I don't understand why they looking for .so file, it supposed to be mapped as .jnilib on Mac.
This is broken on TP4 as well.

I'm still seeing this issue. Here is what I get:
/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java -client "-agentpath:/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so=port=60950,jarpath=/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler-agent.jar,enable=t,depth=1000,startup=connect,time" -classpath /Users/kamleshnanda/jdeveloper/mywork/MyJavaApplication/Project1/classes project1.Class1 Hello
Error occurred during initialization of VM
Could not find agent library in absolute path: /Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so
Process exited with exit code 1.
I'm using the following build:
About
Oracle JDeveloper 11g Release 1 11.1.1.2.0
Java Edition Version 11.1.1.2.0
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Copyright © 1997, 2009 Oracle and/or its affiliates. All rights reserved.
IDE Version: 11.1.1.2.36.55.36
Product ID: oracle.jdeveloper
Product Version: 11.1.1.2.36.55.36
Version
Component     Version
=========     =======
CVS Version (External)     (CVS) 1.12.13 (client/server)
Java(TM) Platform     1.6.0_17
Oracle IDE     11.1.1.2.36.55.36
PMD     JDeveloper Extension 4.2.5.3.0
Team Productivity Center     11.1.1.2.36.55.36
Versioning Support     11.1.1.2.36.55.36
Here are the JVM properties:
java.runtime.name     Java(TM) SE Runtime Environment
java.runtime.version     1.6.0_17-b04-248-10M3025
java.specification.name     Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.6
java.vendor     Apple Inc.
java.vendor.url     http://www.apple.com/
java.vendor.url.bug     http://bugreport.apple.com/
java.version     1.6.0_17
java.vm.info     mixed mode
java.vm.name     Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor     Apple Inc.
java.vm.version     14.3-b01-101
Here is the OS information:
os.arch     x86_64
os.name     Mac OS X
os.version     10.6.2

"Calculate Average" option for the Activity Usage Profile doesn't work

I have the same problem as poster 793128 in a comment for a different thread: the "calculate average" profile option doesn't work for units (it works for cost though). I've used this option a lot on previous versions of Primavera but for some reason is not working on our new P6 release 7 (stand alone). As 793128’s post says: nothing happens, nothing changes, the profile keep showing totals, doesn't matter if the "base hours on time period" box is selected or if the divider is input by the user.
The same option (calculate average / divide by) on the resource usage spreadsheet and on the tabular reports do work as expected so doesn't seem to be that I checked the wrong box for some user or administrator preference set up.
Thank you for any help or clue. I posted this as a different thread because my original post was in a resource profile thread for a different issue that was already answered.

*793365,*
After reading your post I tested an older layout of mine that uses a similar setup and it still operates fine. On the "Resource Usage Profile Options" box under the "Graph" tab, I have "Calculate Average" checked and "24" entered in the "Divide interval totals by:" box.
This allows my resource profile to display manhours per day for me.
Some of my background info:
I run in a multi-users platform and not in a stand alone setup.
We have different resources loaded into the schedule with multiple calendars.
I have several "Resource Filter/Group Names" setup for each separate resource on the "Data" tab too.
Hope this helps,

IMac G5 System Profiler doesn't work?

My system profiler doesn't open. Cannot find in anywhere, applications or any other area. Is it Lost. Can I reinstall, any help would be appreciated
ImacG5 Mac OS X (10.3.9)

If you are not successful from re-running the combo update, remember to do a Permissions repair on the entire hard drive using the First Aid panel of Applications>Utilities>Disk Utility.
Also, boot from the current OS's install disc 1, find that version of Disk Utility among the pull downs at the top of the display, and do a Disk Repair on the entire hard drive, rerunning it repeatedly if necessary until it reports that no repairs are necessary.

GPO to prevent users from accessing the root folder of their profile doesn't work

Hi,
Here's the scenario:
In a Windows 2012 RDS I created two groups called RemoteApp users and remote desktop users.
These groups are defined in the collection for the corresponding RD Session hosts.
These groups are not included in any other group, but they are located under an OU -called Remote Users.
In the domain controller I have created a GPO named "Restrict access to root drive" which is linked to the Remote Users OU.
The GPO I selected is - "Prevent users from adding files to the root of their users files folder"
This doesn't seem to work. I have waited more than a few hours to allow the 90 minutes update, plus used the gpupdate /force
but when a user clicks on the RemoteApp (Excel in this example) then access to the C: drive (which is the root folder of the user's profile) is enabled, and the user can create folders and save files under C:.
I tried to run gpresult for the specific user but the GPO I created wasn't mentioned.
I thought this would be a straight forward mechanism, but somehow it looks like something is missing.
I have read about loopback and expanding, but not sure if this is what needs to be done, and if yes - I'd appreciate if I can get step by step instructions. Everything I found so far was VERY vague.
Thanks !
One more detail that may be relevant - the DC is a Windows Server 2012, and the session host is a Windows 2012 R2.

> These groups are not included in any other group, but they are located
> under an OU -called Remote Users.
>
> In the domain controller I have created a GPO named "Restrict access to
> root drive" which is linked to the Remote Users OU.
>
The USER accounts need to be in the OU your GPO is linked to. Despite
their name, GPOs do NOT apply to groups, but to users (and computers).
Groups only provide an additional layer of filtering...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Font profile doesn't work after updating to ios 7.1

Before updating to ios 7.1 I can see text written in unicode zawgyi font in applications by installing the font profile. But after 7.1, text written in zawgyi unicode font appears as ?????. Some said removing and reinstalling the profile may help but it doesn't. The font appeared for a while when I first opened the app just before the font profile is installed but after restarting the app it showed ????? again. Please help me fix this problem.

hi Mr.Sianpu
nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
thanks

Release to SNP - period split profile doesn't work as expected

Hi Gurus,
I have a DP planning area with monthly storage buckets. I want to release to SNP using a period split profile that distributes the forecast equally to weeks. The problem is that the forecast is always completely released to the first working day in the month (and is not distributed as expected). Further information:
- using SAP SCM 7.0
- time stream in the storage bucket profile of the DP planning area = shipping calendar in the locations
- the simulation of the period split profile shows the expected behavior
Does anyone know what maybe went wrong?
Best regards,
Christoph

Hi Datta,
thanks for your quick reply. I found out that I entered the wrong from date for the release of forecast to SNP.
I used the beginning of the planning area time stream and not the current date. Therefore my settings in the split profile had no effect because the split would only have taken place somewhere in the past.
Best regards,
Christoph

Bug? Updating config profile doesn't work as described

Apple's documentation implies that if you push a new profile to a phone that has the same "Identifier" as an already active profile, then the new profile will be recognized as a replacement to the existing one; if the Identifier is different, then the new profile will be applied in addition to any current ones.
I recently made a change to a profile, without changing the ID, and sent it to my phone. The phone won't activate the profile, though. It gives an error message: "Can't install Profile: Only one Exchange account can be set up at a given time."
This seems like a bug. If the Exchange settings in the new profile are identical to the old one, they should be kept; if different, they should be changed. If I want to modify any settings in the profiles that I've already pushed out to users, I'll have to make a new overlay profile; if I want to change the Exchange settings, I'll have to send them instructions on how to remove the existing profile before I can send the new one. Is there a workaround?

You need to remove any profile that has Exchange keyed into it, then you can install the new profile for Exchange.
Windows Mobile devices work this way, as well.
We had about 50 people that we had to change profiles for and they were able to do the remove and install themselves (the new profiles were delivered from a public web site).
I hope this helps.

My second profile doesn't work after upgrading to Mountain Lion

I just upgraded from Lion to Mountain Lion. I can no longer access a secondary profile that was created in Lion. The profiles were moved to a new MacBook Pro that we just purchased via Time Machine. When I try and sign on, it just sits there with the spinning wheel and hangs the MacBook. Both profiles have Admin rights. Any ideas??? There are a lot of files that are "owned" by that profile that I cannot get to.

Maybe some of you just need to install the latest version. But the truth is there is a bug and this is how to fix it:
System Preferenes > Network > Wi-Fi or Ethernet (whatever you're using) > Advanced > Hardware > Set 'Configure = Manually' > Change 'MTU = Custom' = 1380

TP4[BUG]: Memory profile and CPU profile doesn't work for MAC

I'm using Mac OSX 10.5.4.
When I try to use Memory profile and CPU profile, I got following error:
Error occurred during initialization of VM
Could not find agent library in absolute path: /Shared/jdevstudiobase1111/jdev/lib/profiler15.so
But the file actually exists.

My MAC version is OSX 10.5.4.
I don't have a stacktrace. It just fails silently.
You can easily reproduce this bug by reformat a readonly file.
Here is the code I reverse engineered from oracle.jdeveloper.refactoring.util.Util.java:
public static boolean setReadOnly(java.net.URL url, boolean readOnly)
boolean ret = false;
java.lang.String cmdarray[] = null;
java.lang.String platformPathName = oracle.ide.net.URLFileSystem.getPlatformPathName(url);
java.lang.String osName = java.lang.System.getProperty("os.name", "");
if(osName.startsWith("Windows"))
cmdarray = (new java.lang.String[] {
"ATTRIB", readOnly ? "+R" : "-R", (new StringBuilder()).append('"').append(platformPathName).append('"').toString()
else
if(platformPathName.equalsIgnoreCase("Linux"))
cmdarray = (new java.lang.String[] {
"chmod", readOnly ? "u-w" : "u+w", (new StringBuilder()).append('"').append(platformPathName).append('"').toString()
if(cmdarray != null)
java.lang.Runtime runtime = java.lang.Runtime.getRuntime();
try
java.lang.Process process = runtime.exec(cmdarray);
if(process.waitFor() == 0)
ret = (new File(platformPathName)).canWrite();
if(ret)
oracle.ide.model.Node node = oracle.ide.model.NodeFactory.find(url);
if(node instanceof oracle.ide.model.TextNode)
oracle.ide.model.TextNode textNode = (oracle.ide.model.TextNode)node;
textNode.isReadOnly();
catch(java.io.IOException e)
e.printStackTrace();
catch(java.lang.InterruptedException e)
e.printStackTrace();
return ret;
}

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

AnyConnect Client profile: group-url in server-list with OGS doesn't work propertly

Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
   CISCO STC win2k+
   3,1,00495
   Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly:
When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')

Anton,
It MIGHT be cosmetic:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz92140
If not please open up a TAC case and provide DART for such a connection.
M.

Outlook advanced search & Exchange 2013 - "Sent to...." field doesn't work correctly in online mode?

Hello,<o:p></o:p>
We've come across what seems to be a problem with advanced find in Outlook in online mode, when used with Exchange 2013.
Using the "Messages" tab of "Advanced Find", anything typed into the "Sent to...." field produces no search results. If the field is populated by clicking
"Sent to..." and selecting a name from a contact list or GAL, results are returned.
eg.
Sent items contains messages to "Charlie" who has the email address
[email protected] and sender is
"Dave" who has the email address
[email protected]
Entering "charlie" or
[email protected], (or any previously acceptable partial term such as "charl" or "@contoso.com") into the "Sent to"" field produces no results. If the user exists in a contact
list and is selected from it, the search works fine. The same is true searching the inbox, using the local user's id of "Dave" or
[email protected]
We've confirmed this issue occurs at four client's sites, plus our own internal Exchange 2013 CU3 system. Four of the sites have been transitioned from Exchange 2010, the fifth was a completely new installation. The problem occurs with Outlook
2007, 2010 and 2013.
This works fine in cached mode (not a solution as our clients are predominantly Citrix/RDS). Exchange search doesn't report any issues and the index states are all "healthy",
we've also tried rebuilding the indexes with no improvement.
Any ideas would be appreciated, or even if someone else can confirm they see the same thing.
Thanks.

Hi Winnie,
Thanks for your reply, and I'm sorry I've not responded earlier. While this problem is one that's annoying several of our clients, and while I have been doing further testing and investigation, it's had to take a back seat to other more pressing issues
until now.
OWA search works fine, as does using "From:" in instant search, and the "From" query on the Advanced tab in Advanced Find. The search services have been restarted, indexing state and copy status etc are all healthy, the indexes
have been rebuilt/reseeded, and I've gone through the diagnostics again. Nothing is logged in event viewer, and the only error that comes up when checking failed index docs for a user are for unsupported format handlers (.png etc).
The issue seems purely to be with the "Sent to..." field on the Messages tab, it's as if it gets completely ignored. The search returns instantly with "There are no items to show in this view". Just to make sure I wasn't losing
my marbles, I've compared searches on Exchange 2007 and 2010, and on those I can enter as little as a single letter or email domain and receive the expected results. On 2013 I get nothing whatsoever whatever I enter, unless I pick an address from a contact
list.
At this point, I thought that since Office 365 is Exchange 2013 based it'd be worth testing that, and sure enough I got exactly the same issue. I setup an Office 365/Outlook 2010 profile on a machine that is currently in an existing Exchange 2010
environment where search works correctly, searching Office 365 doesn't work on that either.
EDIT - Ignore this bit, a fresh install of Windows 7 and Office 2010 doesn't work with Office 365 either. I am exploring another avenue. I setup a fresh Windows 7 VM, installed Office 2010 and connected that to Office 365, search worked fine,
so I'm now looking into what the difference with that VM and the servers and workstations out "in the wild" could be. For example, the test VM isn't on a domain, it's not fully patched, it has no additional software installed etc. Outside
of Microsoft applications and operating systems and having similar configurations, I haven't isolated a common link across all of our client sites that are affected, there's no single 3rd party application or anti-virus solution in place at all of them for
example.
I'll update with any findings, but if you or anyone else has any idea in the meantime I'd be grateful for your input.
Regards.

DVI to HDMI doesn't work with Panasonic Monitor

Hi all,
I have a Panasonic monitor, model TH-50PX75U that we've used with my Macbook Pro. I have an DVI (large style) to HDMI cable that we connect the Macbook with, and it works fine.
I also have a MacPro that I want to use this monitor with. It has 1 full size DVI display port and 2 mini display ports. In the past I've used the DVI and one mini port to connect 2 monitors at once one the MacPro and it has worked fine.
I tried connecting the Panasonic monitor to use on my mid 2012 MacPro but I never get a picture. I reconnected one of the other monitors to a mini dispplay port and can see that the MacPro recognizes the Panasonic monitor. Both monitors show up in the Display section under System Preferences. I've tries various settings for the Panasionic monitor but I can never get anything to display on it.
What am I missing here? The MacPro is a mid 2012 with 3.2Gig Quad Core / 6 Gig ram / Radion 5770 graphic card, and runs ML 10.8.3.
Any advise is appreciated.
Thanks!
Ray

Ok, so I had time to do some testing and here's what I've done:
I plugged in my Macbook which does work on the Pana monitor, and looked at the Profile. I then compared it to the Profile on the Mac Pro. There are some differences which I'm guessing have to do with different HW. I'm going to include some photos of the working and not working monitor scenarios do you can see what I'm seeing.
Does anyone have any suggestions as to how to make this work?
Photo1: Shows the Macbook and the Pana monitor together using DVI to HDMI cable to connect the two.
Photo2: Shows the display settings with the small monitor and Pana connected to Mac Pro. Notice there are no numbers in the diplays. Mirroring them doesn't work either. The small monitor is using a DVI to mini port adapter to connect to the graphics card, the Pana is using an HDMI to DVI cable (same one I used with the Macbook) to connect to the DVI port of the graphics card.
Photo3: Both monitors are on. The Mac Pro knows the Panasonic is there but I never get a display on it.
Message was edited by: Rayzorx

Can't Add Credit Card (submit button doesn't work)

Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
If it helps, I have the Palm Pre, I'm with O2 (UK).
Can anyone help?
Post relates to: Pre p100ueu (O2)

This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

Jumpstart flash_install profile doesn't work

Similar Messages

Maybe you are looking for