Junit installed, but with test failures

Hello,
I installed junit using pacman without issues. Now I tried to do the tests as mentioned in http://junit.sourceforge.net/doc/faq/faq.htm#started_2.
However that causes two failures as below:
faraz ~ $ java org.junit.runner.JUnitCore org.junit.tests.AllTests
JUnit version 4.6
.......................................................................................................................................E..............................................I.II.................................E.............................................................................................................
Time: 6.868
There were 2 failures:
1) initializationError(org.junit.tests.junit3compatibility.OldTests)
java.lang.NoClassDefFoundError: junit/tests/AllTests
at org.junit.tests.junit3compatibility.OldTests.suite(OldTests.java:9)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.junit.internal.runners.SuiteMethod.testFromSuiteMethod(SuiteMethod.java:34)
at org.junit.internal.runners.SuiteMethod.<init>(SuiteMethod.java:23)
at org.junit.runners.AllTests.<init>(AllTests.java:22)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.junit.internal.builders.AnnotatedBuilder.buildRunner(AnnotatedBuilder.java:31)
at org.junit.internal.builders.AnnotatedBuilder.runnerForClass(AnnotatedBuilder.java:24)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:57)
at org.junit.internal.builders.AllDefaultPossibilitiesBuilder.runnerForClass(AllDefaultPossibilitiesBuilder.java:29)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:57)
at org.junit.runners.model.RunnerBuilder.runners(RunnerBuilder.java:93)
at org.junit.runners.model.RunnerBuilder.runners(RunnerBuilder.java:84)
at org.junit.runners.Suite.<init>(Suite.java:90)
at org.junit.runners.Suite.<init>(Suite.java:55)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.junit.internal.builders.AnnotatedBuilder.buildRunner(AnnotatedBuilder.java:35)
at org.junit.internal.builders.AnnotatedBuilder.runnerForClass(AnnotatedBuilder.java:24)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:57)
at org.junit.internal.builders.AllDefaultPossibilitiesBuilder.runnerForClass(AllDefaultPossibilitiesBuilder.java:29)
at org.junit.runner.Computer.getRunner(Computer.java:23)
at org.junit.runner.Computer$1.runnerForClass(Computer.java:17)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:57)
at org.junit.runners.model.RunnerBuilder.runners(RunnerBuilder.java:93)
at org.junit.runners.model.RunnerBuilder.runners(RunnerBuilder.java:84)
at org.junit.runners.Suite.<init>(Suite.java:68)
at org.junit.runner.Computer.getSuite(Computer.java:14)
at org.junit.runner.Request.classes(Request.java:70)
at org.junit.runner.JUnitCore.run(JUnitCore.java:119)
at org.junit.runner.JUnitCore.runMain(JUnitCore.java:100)
at org.junit.runner.JUnitCore.runMainAndExit(JUnitCore.java:54)
at org.junit.runner.JUnitCore.main(JUnitCore.java:46)
Caused by: java.lang.ClassNotFoundException: junit.tests.AllTests
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
... 41 more
2) failureCausesExitCodeOf1(org.junit.tests.running.core.SystemExitTest)
java.lang.NullPointerException
at org.junit.tests.running.core.SystemExitTest.failureCausesExitCodeOf1(SystemExitTest.java:23)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:70)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:44)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at org.junit.runners.Suite.runChild(Suite.java:117)
at org.junit.runners.Suite.runChild(Suite.java:24)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at org.junit.runners.Suite.runChild(Suite.java:117)
at org.junit.runners.Suite.runChild(Suite.java:24)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at org.junit.runner.JUnitCore.run(JUnitCore.java:159)
at org.junit.runner.JUnitCore.run(JUnitCore.java:138)
at org.junit.runner.JUnitCore.run(JUnitCore.java:119)
at org.junit.runner.JUnitCore.runMain(JUnitCore.java:100)
at org.junit.runner.JUnitCore.runMainAndExit(JUnitCore.java:54)
at org.junit.runner.JUnitCore.main(JUnitCore.java:46)
FAILURES!!!
Tests run: 324, Failures: 2
Any ideas what this may be?
Thanks.

From the FAQ you linked to:
If attempting to run your tests results in a NoClassDefFoundError, then something is missing from your CLASSPATH.
Given that the first error was java.lang.NoClassDefFoundError: I'd start looking at your CLASSPATH.
http://junit.sourceforge.net/doc/faq/faq.htm#running_1

Similar Messages

[SOLVED] First Arch Install - but with wireless problem

Hi all
I got my first Arch installation working this morning. It was only the third try at installing which I didn't think was too bad really. I made some dumb mistakes the first two times. Arch rocks once you take the plunge. I've initially set it up with KDE but am thinking of switching to OpenBox instead - I like the minimal sort of style.
I've got a bit of an issue with the wireless. My settings in /etc/network.d/talktalk are as follows:
CONNECTION='wireless'
DESCRIPTION='A simple WEP encrypted wireless connection'
INTERFACE='wlan0'
SECURITY='wep'
ESSID='TALKTALK-8AD68C'
KEY='s:######'
IP='dhcp'
# Uncomment this if your ssid is hidden
#HIDDEN=yes
It's a direct copy of the wep wireless example in /etc/network.d/examples.
The issue is that I issue from the command line: sudo netcfg talktalk
It responds initially with: [BUSY] but then responds: WPA Authentication/Association Failed [FAIL]
I know the wireless card works fine - I am dual booting with Ubuntu, and the ESSID and Key are correct. Any ideas anyone?
Thanks In Advance
Rich
Last edited by RichAustin (2011-07-27 18:53:56)

I can't see anything in the 2 posts mentioned. These are the settings I have so far:
I've just noticed in point (6) below that it says "Access Point: Not-Associated". Possibly significant?
1) Output from netcfg:
[richard@dhcppc2 ~]$ sudo netcfg talktalk
:: talktalk up [BUSY]
> WPA Authentication/Association Failed
[FAIL]
2) Content of my /etc/network.d network profile - talktalk (actual key is obscured):
CONNECTION='wireless'
DESCRIPTION='A simple WEP encrypted wireless connection'
INTERFACE='wlan0'
SECURITY='wep'
ESSID='TALKTALK-8AD68C'
KEY='s:#####'
IP='dhcp'
# Uncomment this if your ssid is hidden
#HIDDEN=yes
3) Netcfg version:
[richard@dhcppc2 ~]$ sudo netcfg -v
Password:
netcfg v2.5.5
4) Output from lsmod:
[richard@dhcppc2 ~]$ sudo lsmod
Module Size Used by
ipv6 249068 44
joydev 7535 0
snd_hda_codec_hdmi 20368 1
snd_hda_codec_realtek 225687 1
snd_hda_intel 19261 4
snd_hda_codec 66665 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
arc4 1094 2
ecb 1645 2
snd_hwdep 4919 1 snd_hda_codec
uvcvideo 55084 0
snd_pcm 60311 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 15542 2 snd_pcm
videodev 70734 1 uvcvideo
snd 43399 13 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
brcmsmac 561908 0
soundcore 5018 1 snd
iTCO_wdt 10333 0
sg 21022 0
r8169 34891 0
mac80211 189598 1 brcmsmac
hp_wmi 6602 0
i2c_i801 7039 0
iTCO_vendor_support 1553 1 iTCO_wdt
cfg80211 126930 2 brcmsmac,mac80211
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
sparse_keymap 2636 1 hp_wmi
pcspkr 1415 0
serio_raw 3430 0
rfkill 12510 2 hp_wmi,cfg80211
media 8513 1 videodev
processor 21884 0
mii 3383 1 r8169
psmouse 55927 0
wmi 7367 1 hp_wmi
evdev 7310 9
ac 2545 0
thermal 6603 0
battery 8905 0
ext4 334562 3
mbcache 4321 1 ext4
jbd2 59098 1 ext4
crc16 1077 1 ext4
usbhid 31211 0
hid 63007 1 usbhid
sr_mod 12956 0
cdrom 31341 1 sr_mod
sd_mod 25483 5
ahci 18093 4
libahci 16581 1 ahci
libata 154285 2 ahci,libahci
ehci_hcd 34847 0
usbcore 119324 4 uvcvideo,usbhid,ehci_hcd
scsi_mod 110702 4 sg,sr_mod,sd_mod,libata
i915 557838 2
drm_kms_helper 24245 1 i915
drm 147653 3 i915,drm_kms_helper
intel_agp 8664 1 i915
i2c_algo_bit 4431 1 i915
button 3654 1 i915
intel_gtt 11417 3 i915,intel_agp
agpgart 22160 3 drm,intel_agp,intel_gtt
i2c_core 16665 6 videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 9852 1 i915
5) Output from iwconfig:
[richard@dhcppc2 ~]$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"TALKTALK-8AD68C"
Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated
Tx-Power=19 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

SAP BPC 7.5 Client, Silent install but with progress bar, can it be done?

Hi All,
I need to uninstall the BPC 7 Client and then deploy 7.5 to around 250 users accross the country.
We have SCCM (SMS) in place so will be using that.
I have the uninstall of 7 sorted and I have the response file etc sorted for the silent install of 7.5 and the install runs, silently, no issue.
Is there a way though that one can "turn on" the progress bar during the install? So that users dont shutdown or disconnect in the 15min it takes the install to run.
By way of example, in the SAP Business objects enterprise client on can configure the Silent install so that although it never prompts the user for a reponse there is a progress bar that runs, indicating that there is an install in progress.
Thanks in advance,
Bryan

Hi Sebastian,
No worries, I am using a pop up countdown so the users have some idea on progress. Would love to know why the install runs for over 15min.
In the above case the uninstall was easy as we had deployed using MS AppV so it was just a case of deleting the advert in SCCM and the application was pulled from the users desktops.
For 7.5 I am using a vbscript with following to uninstall:
The install string pulled from the clients registry uninstall folder:
RunCommand Chr(34) & "C:\Program Files\InstallShield Installation Information\{EC8753EF-EE78-48B5-A4D0-FBBD237B5D53}\setup.exe" & Chr(34) & " -runfromtemp -l0x0009UNINSTALL -removeonly"
We create a custom link, so this deletes it.
DeleteFile "c:\Users\Public\Desktop\SAP BPC 7.5.lnk"
You should be able to create something similar for 7.0 & 7.1
Hope that helps,
Bryan

I cannot re install lightroom with cc

I am trying to re install lightroom using cc, I have tried stopping cc and restarting, re starting my pc, uninstalling cc and re installing but with everything I try it is telling me that lightroom is already on my pc and will not let me re install it!! Any help would be greatly appreciated!!

AAM lists applications as "Up to Date" when not installed
Mylenium

Query works in Test mode but fails with transient failure

Hi,
I have a query that works well while testing with input json data. However, when the job is started the query fails with transient failure.
I have two eventhub input sources input1 and input2. I also have a reference data source in a blob, ref.
The query is
WITH nameone AS(
SELECT ref.field1 as field1,ref.field2 as field2,MIN(input1.datetimestamp) AS datetimestamp,avg(input1.value) as value FROM input1 TIMESTAMP BY datetimestamp JOIN ref ON ref.field1 = input1.field1 GROUP BY ref.field1,tumblingwindow(second,30)
), nametwo AS(
SELECT ref.field1 as field1,ref.field2 as field2,MIN(input2.datetimestamp) AS datetimestamp,avg(input2.value) as value FROM input2 TIMESTAMP BY datetimestamp JOIN ref ON ref.field1 = input2.field1 GROUP BY ref.field1,tumblingwindow(second,30)
SELECT field1, field2,datetimestamp,value from nameone
UNION
SELECT field1, field2,datetimestamp,value from nametwo
Thanks

I solved the problem.
The issue was in conversion of incoming data to write into an SQL db.
Query failed to convert
System.Int64 (incoming data format) to System.Double ( SQL column data format)
I solved it by changing SQL column format to int, but I think this casting should be done automatically by the query. I can also CAST the data I guess but sometimes using CAST on everything is kind of a pain.
Another issue I faced was the failure messages. I checked the logs for last 12 hours. Sometimes the failure will point to the Writing Error (conversion of int to double) but sometimes the failure will simply be transient failure. So it was difficult to pinpoint
the error exactly.
Thanks anyways.

When does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.

WSUS throwing 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."

Hello,
Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal." We currently have 252 computers with errors in WSUS,
and 33 updates with errors. We have never had issues up until two months ago. If you keep rebooting the machine, and keep running updates, they eventually all install. I believe I will see the machines with errors go away as the weekly scheduled
WSUS install runs over and over, and the machines reboot.
- We run IE8 in our environment and sometimes IE9.
- We have 300 clients, all running Windows 7 SP1 x64.
- Our WSUS server is running on Server 2008 R2. The WSUS build number is 3.2.7600.262.
- We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates. We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
- Clients are throwing errors 800F0902, 80242016, and 80070005.
- I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients. When an update runs and fails, there is a "Install" folder created inside this folder. If you try to open it after the failure you get
"Access Denied" If you reboot the machine, the install folder goes away. (I assume this is a temp folder created to run updates). I've checked the permissions on this folder on various machines and all seems normal. I think
this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.
- I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service. The folder redownloads but the client still throws errors.
- I've gone through our Group Policies looking for anything that can cause this and found nothing. We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally. I then rebuilt multiple
machines using Dell KACE, and still had failures.
- We run SEP 11 and 12 on our clients. I've tried removing the AV, making sure the firewall was off, etc. It still throws errors.
- I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
- I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS. They have thrown errors.
- I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
- I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
- I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site. This seems to work, althrough it does throw some errors
but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
Has anyone else been experiencing this? Any suggestions as to how I can fix this?

Hi,
Error 800f0902
Please try the method in this thread:
Error
Code: 800f0902
Error 80242016
If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
80070005
Usually means access denied
Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients?

PXE-E61 Meadia test failure error occurred during installing OS form windows deployment service?

Hi,
I have installed WDS service in my dell server windows 2008 server R2. I am using WDS server and Dhcp server in different machine.I have received error "PXE:E-61 Media test failure check cable ", when I trying to install
OS from my WDS server. But I have created a one partition in VMware and successfully installed windows 2008 R2 server from Windows deployment service. But when I am trying to install the OS in another dell server from WDS, I have received this error.
Any help?

Hi,
For PXE boot, we need the client boot from network. Check your boot option in BIOS settings. Meanwhile, we need WDS server and
DHCP server accessible. If the client locate in a different subnet, IP helper should be configured to point to WDS server and DHCP server.
If everything is configured correctly, I recommend you contact with the manufacture.
Hope this helps.

Equium A100-147 with error message "PXE-E61 Media Test Failure"

Hi all,
I have Equium A100 out of warranty, due to error message "PXE-61 Media Test Failure" I took it to my local computer menders, they told me my Toshiba 60gb hard drive had failed (MG6034GSX) and replaced it with a another 120gb model.
I tried to reload system from Toshiba recovery disc, reload reaches 75% then messages come up saying it can't find loads of operating system files.
Thinking the Recovery disc was faulty I obtained a replacement from Toshiba, and this reload disc gave the same problem.
I have loaded XP Professional on to 120gb HDD and it runs OK but I would like to load original as it came with XP MCE.
Is my problem the 120gb HDD which should be as original 60gb and has the HDD got to be genuine Toshiba to accept the recovery media ?
Does anybody have any ideas, I would really appreciate your help.
Cheers
diggermender

Hi R2D2
Thank you for your help. I tried the default bios settings and reformatting the HDD and an OS reinstall with the same outcome.
As you said it could be a HDD problem I returned it to the people who fitted the replacement HDD, they diagnosed a faulty HDD, replaced it under warranty and installed the OS for me. I guess the answer to "does the replacement HDD have to be genuine Toshiba" is no, in my case it doesn't.
Machine is now working fine. Thank you for your help, it's really appreciated and once again I think this is a great forum.
Cheers
Diggermender

I have a Adobde CC account but when i open the app to download the different software, i have illustrator, indesign, photoshop, bridge to install but premiere pro, after effects, lightroom, etc. to "test"...???

I have a Adobde CC account but when i open the app to download the different software, i have illustrator, indesign, photoshop, bridge to install but premiere pro, after effects, lightroom, etc. to "test"...???
Before (2-3 monate before) i had no problem to access to lightroom & after effetcs...help me please. Thx

That's okay , besides I got nothing to do lol hehehe atleast I can make myself useful for someone else hehe
1)Navigate to C:\Windows\System32\drivers\etc and look for file named hosts inside etc folder.
2)Copy the hosts file to Desktop and open the same with notepad.
Check with the hosts file entries , let me know if there are any Adobe entries like 127.0.01 xxx.,adobe.com .activate.adobe.com....etc?
If there are no Adobe entries in Hosts file .
If you wish , you may uinstall and reinstall the app .
You may try below steps :
Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate Adobe Creative Cloud and uninstall it.
End all Adobe related Tasks from Task Manager.
Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
Once the installation process is completed , sign in and check.
Still same issue ?? let me know

Kindly assist with repeated failure to correctly install iTunes on Windows7 Professional. Thanks. Bobby

Could I please be assisted with recurrent failure for iTunes to install correctly on my Dell desktop running Windows7 Professional? Thank you. Bobby

Well, I found a workaround for my issue. It's described in this article:
[url="iPod not recognized correctly on Toshiba laptop"]http://docs.info.apple.com/article.html?artnum=300836[/url]
By disabling the "Sandard Enhanced PCI to USB Host Controller" in device manager, my iPod was correctly recognized and I was able to sync with iTunes. That's the good news.
The bad news is that: a) Windows warns me that my "device can operate faster if connected to a USB 2.0 port" - and the sync with iTunes runs slowly; b) if I reanable that USB device (as suggested in the Apple article, my iPod is no longer recognized.
For now, I'll just disable this device when I need to sync, then reenable it when done. But this is going to be a pain. I really don't consider this a fix. It's really annoying that the iPod is the only USB device that requires this kind of nonsense.
Looking forward to a "real" fix for this some time soon.

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

Problems with 1st Boot (media test failure, disk boot failure)

I have the K7N2G motherboard.
I hooked up everything in my system and on my first boot I get this error:
PXE-E61: Media Test Failure, check cable
PXE-M0F: Exiting NVIDIA Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So, I figure I'll start from scratch and just start with the floppy drive, cpu, and ram hooked up and I get the same error. Here are my specs:
MSI K7N2G
Athlon 2400
Kingston PC3500 RAM
Volcano 7 Fan/Heatsink
Seagate Barracuda V SATA 80 GB
Verbatim CDRW 52/24/52
Any help or suggestions would be greatly appreciated.

This happens if:
- The hard drive is not installed
- An Operating System is not installed
- The BIOS cant detect the hard drive, maybe:
= The wrong jumpers are set on the hard-drive
= The cable is not polarised and pin 1 is on the wrong pin
- The hard-drive has not been set-up in the BIOS
Try something like the above

I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only as my sound board only while recording on something else and the. I will delete it.. Real P I A....

How do I upgrade the ram?
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Junit installed, but with test failures

Similar Messages

Maybe you are looking for