JUnit3.8.1 Fails Installation Test?

Can I get JUnit help here or is there a better place to go?
The installation test failes with the following:
D:\Program Files>java junit.textui.TestRunner junit.samples.AllTests
Class not found "junit.samples.AllTests"This class currently is located at D:\Program Files\junit3.8.1\junit\samples.
I down loaded the current version JUnit3.8.1 zip file and extracted it to
D:\Program Files using folder names. This created a subdirectory \junit3.8.1
I created a system variable JUNIT_HOME and set it to
D:\Program Files\junit3.8.1I then set classpath to:
C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Msbase.jar;C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Msutil.jar;C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\Mssqlserver.jar;%JUNIT_HOME%\JUNIT.JARThese are the instructions in the FAQ on the SourceForge site.
Are the environment variable names case sensitive?
How do I get past this problem? Everything looks good to me.
You help would be appreciated.
Thanks
Jim

The base4 directory for your tests are under D:\Program Files\junit3.8.1\ so this will be needing in your class path.
try
java -cp "D:\Program Files\junit3.8.1\" junit.textui.TestRunner junit.samples.AllTests

Similar Messages

  • 865PE NEO2 FSIR fails memory tests

    This is the second MB that I've had this problem with, so something is causing them to fail.  Here's the story:
    New install, 865PE Neo2 FSIR + P4 2.6GHz 800MHz FSB, 2 x Crucial PC3200 256MB DDR, everything seems ok, XP installs with no problems.
    About a month down the road I'm plagued by sudden reboots, Microsoft Error Reporting says RAM, says to DL and run it's DOS memory check utility.  I get the utility, create bootable CD and run the utility, computer fails all RAM checks.  I pull each RAM stick in turn and re-run the check with each stick separately, still fails all tests.  Shortly after this, the board refuses to POST.  Ship the board back to New Egg for replacement.
    Installed replacement MB with 4 x 256MB Crucial PC3200, Microsoft DOS memory check program passes, no problems.  About 2 weeks later I run into minor instability so I run the same memory check again, the board fails all tests?????  I pull all Crucial memory sticks and put in a test stick of Corsair XMS 3200; same result, failure of all memory tests.
    At this point, WinXP still runs, but this is the same pattern that the other board showed, right until it quit altogether.
    It occurs to me that I DID flash BIOS to 1.9 between the time I first tested the RAM and got a pass and the time I tested and got a failure, could this be a coincidence?  I can't remember if I updated the BIOS on the first board or not, so this may mean nothing.
    System Specs:
    MSI 865PE NEO2 FSIR
    P4 2.6GHz, 800MHz FSB (all defaults, no overclock, Vantec HS)
    Crucial CT3264Z40B.8T PC3200, CL3 256MB (2 Modules)
    Crucial CT3264Z40B.8T2 PC 3200, CL3 256MB (2 Modules)
    (Tested with same results with single Corsair CMX512-3200C2PT 512MB)
    Antex True Power 430W PS
    ATI Radeon 9600 Pro
    All PCI slots open
    Seagate 120GB System drive, 7,200RPM primary master
    IBM 30GB drive, 7,200RPM primary slave
    LiteOn DVD ROM secondary master
    Sony CDRW secondary slave
    2 x IBM 30GB drives on Promise PATA.
    I know I'm probably gonna have to RMA this board, but I'd really like to know what is causing this so I can avoid it next time.
    If anyone has any ideas I'd sure appreciate it.
    Scott

    Quote
    Originally posted by jwspicer
    As they say - been there, done that.  Always flash using DOS, and always keep backup, so I went back to the original BIOS for the board.  No luck.  Apparently once the screwup is done - it stays that way.
    --BUT--
    Suspect it is the reallocation for the P4 EE that is the issue.  Reason is that Memtest86 has been running on that box for 9 hours now with NO error.  However, it also shows only 104K of reserved memory.  My other 865 board with onboard RAID (an ASUS P4P800 Deluxe) shows 687K reserved.  So either the ASUS is wasting a lot of space, or the MIS is no longer correctly indicating the amount of memory reserved by the BIOS (including the Promise BIOS) at startup.  Then Microsoft's utility is not correctly scanning.  But Memtest, which probes for the "correct" setting, is.  (The Memtest86 version is 3.0, and the test was done with the Promise enabled and drives attached (so the BIOS loads) and all the other setup was as it would be normally (standard IBOS options, etc.)
    So who's right?  And if MS' tool has the problem, does that indicate Windows XP reads memory the same way?  Hmmm...
    Hmm, I haven't tried reverting BIOS, but I'm typing this on the affected machine (which Memtest 86 says is fine) with only the two RAM chips it likes and so far no problems; I've run PCMark4 and 3DMark4 benchmarks all night and no problems, it was still happily churning away on 3DMark this morning.  I guess either one of the Crucial sticks it doesn't like is bad or Crucial changed something in a revision to the chips it doesn't like.
    Just a FYI, the Crucial sticks it DOESN'T like are CT3264Z40B.8T2
    The sticks it DOES like (at slow or fast performance, forget about turbo or ultra turbo) are CT3264Z40B.8T
    Both pairs are PC3200, CL3, 256MB DIMM's, single sided.
    I think you're right about Microsoft's RAM tester being buggy, I can't believe ANYTHING could run if the RAM was actually giving the errors it shows, EVERY test shows things like "expected result 11111111 actual result ff1e0001"  The Microsoft tester does run fine on the other 5 computers here; a mix of laptops and desktops; none using this board.  It also ran on this board when it was installed, I guess the BIOS upgrade must be the cause.
    Scott

  • [svn:bz-trunk] 16330: QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config .xml file

    Revision: 16330
    Revision: 16330
    Author:   [email protected]
    Date:     2010-05-26 07:55:41 -0700 (Wed, 26 May 2010)
    Log Message:
    QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config.xml file
    Doc: No
    Checkintests: NA
    Details: Updated expected error message to match current error.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/NoServicesConfigFileTest/error.t xt

    I have uploaded detail.txt at below url.
    http://m.uploadedit.com/b041/1413264342685.txt
    Hi Mahesh,
    According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
    setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
    However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
    to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
    For more details about this error, please review the following similar thread.
    http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
    Thanks,
    Lydia Zhang

  • RPE-02085: Failed to test wb_rti_workflow_util.initialize

    Hi,
    I'm getting the below error when i try to deploy process flow via deployment manager.
    RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link ORCL@WB_LK_LD_INV. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
    - ORA-04052: error occurred when looking up remote object RUNTIME_OWNER.WB_RTI_WORKFLOW_UTIL@ORCL@WB_LK_LD_INV
    ORA-12545: Connect failed because target host or object does not exist
    What would be the cause?
    I'm exactly following the toturial which given by http://www.oracle.com/technology/obe/obe_bi/index.html
    Even I have given grant EXECUTE ANY PROCEDURE to owf_mgr but still i'm getting the same error.
    Please help me...
    Below is the details of my installation:
    Database : 10.1.0.2.0
    OWB: 10.1.0.2.0
    OWF: 2.6.3
    Thanks
    Raj Kumar

    U need to login into repository owner and grant the all privilages on wb_rti_workflow_util package to your user ( owf_mgr , in ur case)
    in short
    grant all on wb_rti_workflow_util to owf_mgr ( u need to type this command from repository owner login )
    Nikita

  • [svn:bz-trunk] 18907: Fix failing MBean test.

    Revision: 18907
    Revision: 18907
    Author:   [email protected]
    Date:     2010-12-01 11:55:22 -0800 (Wed, 01 Dec 2010)
    Log Message:
    Fix failing MBean test. The name of the web application changed in the web.xml file for the webapp causing the test to break. I updated the test to use the new webapp name which is "Flex QA Web Application". There are a few more MBean tests that are failing likely due to the same problem. I will update these as I have time unless someone else wants to tackle this.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/MBean/jmx/MBeanServerGateway.mxm l

    Pierre-Charles David a écrit :
    > Hi,
    >
    > I've got a very strange issue and I don't know where to look for to fix
    > it. In some Eclipse configuration I use, SWTBot does not work at all: it
    > fails the very first method with a WidgetNotFoundException.
    [snip]
    Well, I found the issue:
    SWTBot declares a dependency to org.apache.log4j but does not indicate
    any specific version. However, it uses APIs which only appeared in log4j
    1.2.12 (at least Logger.trace(), maybe others).
    In the Eclipse installation I have which did not work ("Topcased RCP"),
    there was a bundle which provided the org.apache.log4j package, but
    using log4j version 1.2.8. As it happens, Eclipse decided to provide
    this one to SWTBot instead of other versions available from different
    bundles (1.2.12 and 1.2.15). The test failed with an internal
    NoSuchMethodError, which must have been caught by some code and wrapped
    as the WidgetNotFoundException I saw.
    Removing the plugin with log4j 1.2.8 from the test's run configuration
    solves the issue.
    I have opened bug #286527 about this.

  • System failed memory test

    I am really new to Solaris so please forgive me if I sound really dumb. I was able to install Solaris 10, turned off my computer and now all I recieve is System failed memory test. Please help have tried different memory sticks and still recieve the same message.

    is this a bios message? id suggest running a mem test if this is coming before the os starts up [http://www.memtest.org/]
    if you have the mother board diag tools on cd, run those as well. unless this is a sparc system?

  • Photoshop CC White Window Workaround Plugin Fails Version Test?

    I'm sure everyone with a Wacom tablet on a Mac is aware of the "White window" issue. See the original discussion thread at: Drop Down Menus in Photoshop CS 6 Goes Blank In Mavericks
    Photoshop developers partook in the discussion on the thread, and a plugin that fixed the issue was released. Plugin works great, and even in CC/CS6
    With the latest update to the Photoshop CC application, the white window issue is back. Looking in the console reveals the following:
    8/7/14 1:31:03.798 PM Adobe Photoshop CC 2014[11038]: WhiteWindowWorkaround failed version test (<= 14) and it will not install. Version is 15
    8/7/14 1:31:03.798 PM Adobe Photoshop CC 2014[11038]: WhiteWindowWorkaround did *not* initialize
    Is there an updated version/fix that anyone is aware of? I searched, but maybe I missed something.
    Many thanks.
    Andrew.

    Photoshop CC 2014 does not need that plugin, because the workarounds are already built into the app.

  • Homesite5.0 fails installation in vista

    homesite5.0 fails installation right away after giving me
    error:
    in function sdcomponenttree unable to create dialog
    then gives me a blank error box
    then a series of blank abort/retry/ignore boxes throughout
    installation
    creates start menu dir, but no shortcut
    does not copy files, does not create program files dir.
    tried running as administrator, tried setting setup file to
    xp compatibility to no avail.
    anyone have experience with this problem?

    Hi Bill, yes, I can do that. Created one several levels deep.
    I assume you mean HS is running on Vista. It's not clear if you're
    problem is in creating that directory on RDS remote host (from a HS
    client running Vista) or specifically in also creating the
    directory on an RDS remote host (or localhost) running Vista. I was
    able to create a directory several levels deep on both a remote
    machine (not running Vista) and my localhost running Vista, both
    via RDS.
    I'll add, FWIW, that I'm running HomeSite+ 5.5 (not HomeSite
    5.0). If you (or others) really are still on 5.0, there's at least
    a free update to HS 5.2 (
    http://www.adobe.com/cfusion/resourcecenter/resourcecenter.cfm?pagename=hs%5F52%5Fupdater& loc=en%5Fus&)
    To update to HS 5.5, it would cost a HS 5.0 customer US$29.
    More at
    http://www.adobe.com/products/homesite/productinfo/upgrade/
    That said, no release of HS specifically lists Vista as
    supported (see the requirements page, which lists Win2k3 as tha
    latest OS specifically supported):
    http://www.adobe.com/products/homesite/productinfo/systemreqs/
    I'll point out as well that if one has Dreamweaver 8, that
    includes HomeSite+ 5.5 free on the CD (you use the DW license to
    register it).
    If anyone would ask about the difference between HomeSite and
    HomeSite+, I'd point you to a blog entry I did (one of many, by
    myself and others over the years):
    http://carehart.org/blog/client/index.cfm/2007/10/23/homesite_homesiteplus_and_adobe_eclip se_ext
    Hope that's helpful.

  • Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z

    I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit.  I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS.  I have started installing apps on the RAID 1 array (E since the SSD is only 256 GB.
    While installing software, some install fine, but often the installation hangs with no errors indicated and I have to kill the installer task through task manager.  I usually follow that with a system shutdown or restart and almost every time that results in a resync of the RAID array.  Sometimes the shutdown or restart is quick, and other times it takes several minutes with intermittent disk activity as indicated by the drive light.  I have sometimes given up after 10 minutes or so and powered down by holding down the power button.  I can understand a resync after the forced power down, but it seems that all it takes to cause a resync is a failed installation, and that seem to happen a lot, even with software that explicitly says it is Windows 8 compatible.  Sometimes the applications run fine even after an apparently failed installation and other times not so much.
    Has anybody else seen this behavior or have any suggestions?  I’d like to get this sorted out before I load any more software.

    Hi,
    Did you check each hard drive for straps? There should not be any straps installed on the hard drive. These drives do have strapping posts.
    Did you use the AMD RaidExpert to create the array volume?  Did you wait until the RAID migration was complete before using the array volume?
    Check the AMD RaidExpert for errors. It's possible that you have a bad hard drive(s).
    Many applications want to be installed on the C drive.  Your SSD is 256GB so you should have plenty of space for most applications and the application performance will be improved.  Use the RAID 1 array to keep and store your data. The mirroring process of RAID 1 will protect it in case one hard drive fails.
    You might want to consider removing all of the data etx.. from the array, use the AMD RAIDExpert to delete out the array volume.  I would then run for hard drive diagnostics.  If the hard drives are free from errors then use disk management to separately reformat each hard drive.  Now go back to the AMD RaidExpert and create your new array volume.
    Be sure to review the software and bios updates for your PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi there,
    I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
    Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
    By following the tutorials at
    here I was able to successful create my Data Connection Gateway with a self-signed certificate.
    However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
    Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
    However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
    The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
    Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
    I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
    Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53]. 
    Some considerations
    If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
    Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
    SQL Profiler does not show any attempt of connection.
    The SQL server instance in question is the default one.
    The error happens regardless if I select the option to encrypt connection or not.
    In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
    The Event Viewer does not provide any further errors than the one I have copied in this post.
    I'm at a loss here. Could someone please advise what might I be doing wrong?
    Regards,
    P.

    Here is what I had to do to solve this issue:
    Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
    domain isn't trusted.
    What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

  • Failed installation: How to rerun Adobe Application Manager updates for Photoshop CS6

    Hi.
    The installation of  Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did intall. I was installing Adobe Reader X .
    That's why I discovered the notication from the application manager about updates for CS6 - and I just confirmed that as well.
    Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
    However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifiying me again to install it. At least not immediately ...
    So how do I rerun the Adobe Application Manager update moduel to check for updates manually?

    You go Photoshop CS6 > Help > Updates ...

  • Installation failed installation completed through some components failed to instal correctly

    Hello i've been really exited to donload photoshop and so i decided to try the free version i downloaded creative cloud and went into th eapps and click on photoshop try it free i waited a few 30 mins and it stopped and told me this
    installation failed installation completed through some components failed to instal correctly.
    and then i was like whatttt?!?!?!?!?
    so I decided to come here and ask why this is happening please answer ASAP I really need photoshop for important stuff!!!

    Try restarting your computer, then try again. Awhile back, some of the apps which I think included photoshop require the microsoft runtime to be updated. That runtime requires a restart to finish installing. But since it is a piggyback program, the error code telling you do so is hidden in the log file.
    If it still does not install let us know.

  • Download & Installing ERROR: "Installation failed; Installation completed though some optional components failed to install correctly. (6)"

    "Installation failed; Installation completed though some optional components failed to install correctly. (6)"
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example, ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
    ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
    ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86).
    Any ideas on how to fix this problem?

    Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
    After restarting try the installation.

  • Upon installing the download version of cs5 on a new win 7 pc bridge fails installation

    upon installing the download version of cs5 on a new win 7 64  pc bridge fails installation
    error code 6

    Exit Code: 6 -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 2 error(s), 1 warning(s) ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 ----------- WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1) ----------- Payload: {EE85C227-0148-4825-B659-6A1E142571EE} Adobe Bridge CS5.1 4.1.0.0 ----------- FATAL: DS003: Cannot extract 'C:\Users\Dennis_xps\Desktop\Photoshop\Adobe CS5.1\payloads\AdobeBridge4.1-mul\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{EE85C227-0148-4825-B659-6A1E142571EE}'. Error: Error 0 ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Adobe Bridge CS5.1: Install failed -------------------------------------------------------------------------------------

  • Failed installation but space available going down. How do I delete files?

    Hey I bought Sims 3 a few months back when I was using OSX 10.5 and then I upgraded to Snow Leopard when it came out and now I need to reinstall the game. I have tried about 5 times and each time the install stops working (gets to copying file x of y and doesn't move past this point). Unfortunately now it's gotten to the point where I only have 2.8GB free space on my HDD. I can't find any sims or EA files on my HDD so I can't delete them. Any suggestions would be greatly appreciated.
    Model Name: MacBook
    Model Identifier: MacBook4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.1 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MB41.00C1.B00

    Only once you know where that information is located, which we don't and EA does. Someone on these boards may happen to know, but even if they do, you've still got a failing installer to troubleshoot, and again, EA knows their installer best.

Maybe you are looking for