Just bought launch pro, I click on Recall, it goes to App Store and shows a blank white screen. Like I'm being blocked from this. All other supported apps open in App Store, just not Recall, please help
I just bought the Launch Pro app. Within the app it shows all supported apps, one of them is Recall, I click on Recall it goes to the App Store but doesn't open, it's just a blank white square, all the other apps that I have tried open fine. I've long suspected that my X is getting EVERY WORD that's spoken in my house and every email, web site that I go to...every everything. Can someone please help. I found smart mailboxes on my lap top that I didn't set up, the night that I discovered these my laptop crashed. Help help help.
You would get better response from the iTunes community forum.
Have a nice day!
Similar Messages
-
I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!
Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen. -
Just bought Adobe Photoshop Ps , clicked on the icon in my Mac dock and am staring at a black page with a perimeter of symbols and a heading that reads "Adobe Photoshop CC 2014. I don't have a clue what I do next. I would like to transfer some photos from my iPhoto library. Where do I start?
Photoshop does not transfer files nor import files. It can open files from any place that finder can access for files.
This is the normal process:
You need to log into https://www.adobe.com/creativecloud/catalog/desktop.html Download Center
Select the app you would like to start with
The Creative Cloud manager will install first.
When done installing, the Creative cloud (adobe manager) should open in the middle of your screen.
If no apps automatically start installing then click on Apps
Scroll down to the app you want to install and click the install button
Once the manager says it is done, you can start your app like you normally do with any other app. -
Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????
The Side Switch is to mute your ringers, and most of the application's sound. To totally mute the sound, you must use the rocker to mute it.
-
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.
First step would be a PRAM reset.
http://support.apple.com/kb/ht1379
Post back if that does not work.
The next step would be to try "Repair Disk". -
My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
Mac Pro won't start. It turns on and than a blank, white screen appears. What do I do?
This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570 -
I get nothing but a blank white screen when visiting iTunes-Store. It was working a couple of days ago. Does it have something to do with upgrading Flash-Player (I hope not)? Is anyone else having this problem?
I suppose when Apple decides that my money is important to them then they will fix this issue. I can view the iTunes store with much older versions of iTunes and Safari on several other accounts and computers in my house.
-
Standalone (.exe) Flash 8 apps have stopped working with blank white screen
We have some standalone executable flash applications coded with Flash 8. These are the Microsoft Office 2007 command reference guides produced by Microsoft. Recently they have stopped working and now just display as a blank white screen when run.
As they are self contained Flash 8 movies, I'm unsure what would cause this.
Any ideas please? Could they be converted to a later version somehow? Or converted back to SWF so they can be recompiled back to exe with a later version of Flash? Any help would be appreciated. Thanks.Check what you have at; '''http://get.adobe.com/reader/'''
Lets make sure you only have one program.
Type '''about:plugins'''<enter> in the address bar. Now search for the plug-in.
Example Only;
'''Adobe Acrobat'''
'''File:''' nppdf32.dll,nppdf32.dll
'''Path:''' C:\Program Files (x86)\Adobe\Reader 11.0\Reader\browser\nppdf32.dll,C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AIR\nppdf32.dll
'''Version:''' 11.0.9.29
'''State:''' Enabled
Adobe PDF Plug-In For Firefox and Netscape 11.0.9
Copy and post what it says here.
BTW, is it flash, or Firefox crashing? Please post any new crash reports. -
Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app. I there a fix for this yet?
Scalesy05 wrote:
I there a fix for this yet?
Why would there be a fix? YOU are having the problem. I'm not, no one I know is having the problem. No fix is needed.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new. Have you been through any, if not all of these troubleshooting steps yet? -
Error: Javax.mail does not exist, please help
I have copies mail.jar and activation.jar in the classpath directory as instructed, then try to compile but got the below error: package javax.mail does not exist
please help.
G:\CRD>javac SendMailBean.java
SendMailBean.java:22: package javax.mail does not exist
import javax.mail.*; //JavaMail packages
^
SendMailBean.java:23: package javax.mail.internet does not exist
import javax.mail.internet.*; //JavaMail Internet packages
^
SendMailBean.java:43: cannot resolve symbol
symbol : class Session
location: class SendMailBean
Session l_session = Session.getDefaultInstance(l_props, null);
^
SendMailBean.java:43: cannot resolve symbol
symbol : variable Session
location: class SendMailBean
Session l_session = Session.getDefaultInstance(l_props, null);
^
SendMailBean.java:48: cannot resolve symbol
symbol : class MimeMessage
location: class SendMailBean
MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
^
SendMailBean.java:48: cannot resolve symbol
symbol : class MimeMessage
location: class SendMailBean
MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
^
SendMailBean.java:50: cannot resolve symbol
symbol : class InternetAddress
location: class SendMailBean
l_msg.setFrom(new InternetAddress(p_from)); // Set the From address
^
SendMailBean.java:53: package Message does not exist
l_msg.setRecipients(Message.RecipientType.TO,
^
SendMailBean.java:54: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_to, false));
^
SendMailBean.java:57: package Message does not exist
l_msg.setRecipients(Message.RecipientType.CC,
^
SendMailBean.java:58: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_cc, false));
^
SendMailBean.java:62: package Message does not exist
l_msg.setRecipients(Message.RecipientType.BCC,
^
SendMailBean.java:63: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_bcc, false));
^
SendMailBean.java:68: cannot resolve symbol
symbol : class MimeBodyPart
location: class SendMailBean
MimeBodyPart l_mbp = new MimeBodyPart();
^
SendMailBean.java:68: cannot resolve symbol
symbol : class MimeBodyPart
location: class SendMailBean
MimeBodyPart l_mbp = new MimeBodyPart();
^
SendMailBean.java:72: cannot resolve symbol
symbol : class Multipart
location: class SendMailBean
Multipart l_mp = new MimeMultipart();
^
SendMailBean.java:72: cannot resolve symbol
symbol : class MimeMultipart
location: class SendMailBean
Multipart l_mp = new MimeMultipart();
^
SendMailBean.java:83: cannot resolve symbol
symbol : variable Transport
location: class SendMailBean
Transport.send(l_msg);
^
SendMailBean.java:98: cannot resolve symbol
symbol : class MessagingException
location: class SendMailBean
} catch (MessagingException mex) { // Trap the MessagingException Error
^
19 errorsAnother person who doesn't understand how to set CLASSPATH.
Move those JARs into the same directory as your SendMailBean.java and do it like this:
javac -classpath .;mail.jar;activation.jar -d . *.java
java -classpath .;mail.jar;activation.jar SendMailBeanRead how to set CLASSPATH properly:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/classpath.html -
ITunes store shoes blank white screen??
When I open iTunes, the library is fine, but the store just shows a blank white screen. Any ideas how to fix it? Thanks!I
My network is fine and am having the same issue.
I have:
- dumped iTunes Plist
- tested on another MAC in the home
- dumped system preferences
- deleted certificates
- tested on a new Account
- deleted, downloaded and reinstalled iTunes from Apple.
- created new library
- gone into parental controls/ disabled -renabled iTunes
- verified the App Store App is working
None of these have fixed the issue. -
Itunes store has blank white screen
When clicking on the iTunes icon, my music library comes up, however, when I try to acces the iTunes store, there is a blank white screen. It has been like this for several days. I have tried all of the support suggestions with no luck. Any one else had/have this issue?
Hello whitmanjlw,
Here are some steps could fix the issue:
Apple software on Windows: May see performance issues and blank iTunes store
Hope this helps.
~Julian
Maybe you are looking for
-
Help with using a camcorder in iMovie please?
Hi. I'm 17, and I'd like to create a video of a family holiday for my Nan & Grandad using their video camera, otherwise they'd have to pay some silly amount to get the content copied onto DVDs. The camcorder they have is only meant to work with Windo
-
When i take pictures, they are going to my camera roll but not my photostream
How do I fix this issue. I have tried just about everything I can think of
-
Whenever I open a program two windows pop up.
Whenever I open a document using Preview , MS Word, Adobe Reader, etc. two windows pop-up. The last document I viewed in the program and the one I am trying to look at. It's very annyoing and I would like to fix this. Does anyone have any suggetions?
-
Hi all, i got a new iPhone, i had tried to restore data from the old iPhone to the new one. Unfortunately, before restoring the data i forgot to copy some importance documents and pictures from the new one. so after restoring, those documents are los
-
Error extracting the product installer for trial downloads
Hi-- I tried to download the trial version of Creative Suite Design Premium last night. Waited the two+ hours for the process, and at the end I got the message "Error exracting the product installer (Error 101). Check for available disk space on your