Just got new iPad could not restore from iCloud because of operating system had to set up as new to upgrade now how do I get back to restore from the cloud?

I just got a new iPad it had 6.0 iOS and it would not let me restore from the cloud . I had to set up as new to update to 6.1 iOS now I can't find my backups in the cloud help please..

Welcome to the Apple Community.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Similar Messages

With the new io5 on safari how do you get back to top of the page quickly

With the new io5 on safari how do you get back to top of the page quickly?

Same way as before - click on the top. But the area to click seems to be slightly lower ... aim for the touch of the grey and black instead of the black.

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194).

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

CS4 Pr-Encoder: "Encoding failed/Could not read from the source..."

When i start queueing it apears to be loading fine but then after a few minutes it gives me the yellow hazard triangle on the status column. I have tryied changing settings and still the same.
"Could not read from the source. Please check if it has moved or been deleted."
...is what the details notepad displays
This is my first Pr CS4 editing, Please help.
Thanx!

latest versions of CS4 and snow leopard 10.6.1.
May have no part in your problem, but many are having real issues with almost anything Adobe with Snow Leopard. There has been a lot of chatter saying that Apple is aware of this, and is working on an OS update to be released soon.
While I have not seen this particular issue with Snow Leopard, there have been so many more, that I'd certainly put the OS into the list of "usual suspects." In the Encore forum, some had great success by rolling back the OS to whatever was prior to Snow Leopard, just plain old "Leopard?"
Wish I had a definite cure for your ills, but the best that I can offer is that it does not seem that you are alone.
Good luck, and I hope that the Mac OS update does fix things for you.
Hunt

Installed CS5, now can't export from CS4! Help! "Could not read from the source..."

I installed CS5 but completely ignored the fact plugins were required to be 64-bit. It'll be months before the plugins I require for my projects to be updated!
So I continued editing in CS4 and when I attempted to export with the media encoder it halts instantly with an exclamation mark, the log says :
"Could not read from the source. Please check if it has moved or been deleted."
And yes I'm not stupid, I did my research.
I tried uninstalling CS4 and reinstalling. I tried the shortcut fix. I tried moving my cache files. My extensions are correct.
Right now the only fix seems to be completely removing CS5 and CS4, After Effects just because they share files (?) and all my settings and plugins along with it! I'd rather NOT do that if I can!

Good detective work, and glad that it worked. Now, your cure will be here for us to link to and for others to find. Your title will help direct others to this thread. Job well done.
Thanks,
Hunt

Encore CS4 error "could not read from the source file"

- Source File: C:\Users\Anil\AppData\Local\Temp\2013 11 08 c Big Budha_9.prproj
- Output File: F:\Adobe Encoded Blu-ray\For Disk #013\Disk#013-B\2013 11 08 c Big Budha.m2v
- Preset Used: Full HD 1080i [MPEG] 30 MBPS
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:49:53
25-Jan-14 2:50:32 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
i have tried creaeted a NEW Premiere Pro project and still get the same error again ... can someone help me to figure out what is wrong ...

Hi Neil
I have been using file names with spaces and it has been working fine. As stated in reply to Jones, uninstall and reinstall of Premiere Pro CS4 has helped to get rid of this error.
also i did not use Dynamic link, but was trying to create MPEG file using Media Encoder and then import it in Encore.
your suggestion for H264 seems good and will try it.
x264 Pro is for CS5 and above versions, so it seems i can not use it and have to manage with Adobe Media Encoder's default. Hope i will not have any major technical issues.
please suggest me for below:-
1) i have 4 hours of Full HD footage and made 1080i MPEG2 files of 30mbps to fit in 2 seperate Bluray Disks.
2) now i plan to put all in one Single Bluray Disk by reducing MPEG2 file average data rate to 15mbps. will that work or is there any limitation of time in Bluray Disk.
3) Will it be ok to create H264 files at 30mbps [as you mentioned H264 reduces file size to half of MPEG] and still be able to fit 4 hours footage in one BR Disk ?
4) even though i specify Min 10 Target 25 Max 30 data rate for MPEG files creation, it creats file at data rate of 30 mbps, can you explain why it is happening as i thought my target rate should be 25 mbps and not the maximum rate specified.
Thanks ...
PS...
my source file is .mov 1920 x 1080i 29.97 fps from Canon 6D. first i tried to create progressive file in Encoder but while imported in Encore realised at 29.97 fps, it allows only interlaced file and had to transcode back to interlaced. so i stick to interlaced file.
Canon 6D also allows me to shoot in 24fps [motion movie] which Encore can handle as progressive file for authoring. What are the pro and cons of shooting in 24fps, if you can suggest.
Message was edited by: AnilHVarma

FATAL: Could not read from the boot medium! system halted.

hi
im running win7 64 bit on my pc , installed virtualbox 4.1.16
i have downloaded oracle vm server 3 ( v29653-01.iso ) , created new virtual machine and attached iso file but unable to boot from the iso
i am getting FATAL: Could not read from the boot medium! system halted.
under vm settings > storage > i have
IDE: controller
v29653-01.iso
atrributes: cd/dvd IDE primary master
live cd/dvd unchecked
under general tab i have > Operating system: linux version: oracle (64 bit )
Edited by: user9182826 on Aug 4, 2012 5:34 PM
Edited by: user9182826 on Aug 4, 2012 6:12 PM

Not sure if you are running into the same issue..
OVM 3.0.3 - New VM loses filesystem after OS install
For OEL5 VMs on 3.0.3 you have to add 'xen_emul_unplug=never' to your kernel boot line.

Encoding Failed- Could Not Read from the Source

I have a quickly approaching deadline for the short film I am working on, and it would be greatly appreciated if anyone knew anything of my predicament. Everytime I try to export anything from Premiere Pro (CS4 of course), when I start the queue it says "Could Not Read from the Source. Please check if it has been moved or deleted." The files, of course, have not been moved or deleted, and the raw footage for the film is in the same place as everything else. All my scratch disks are set to the same folder, etc. I don't understand, and it won't even let me export to my camera. It says it does, but when I check my camera, it's nothing but blank tape. Any (quick) help would be very much appreciated!
Thank you.

Media Encoder - encoding failed - could not read from the source

Using PPCC, AME queued jobs all fail with the message "Encoding failed. Could not read from the source".
But doing a simple export works perfectly.

I recall quite a few other threads about this. Do a forum search.

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem
thank you...

Nobody here can fix your problem, we do not work for Apple. And I have no idea what "Chrho" means. Neither does Google.
So - exactly what happens when you try to download a program? And from where are you trying to download it?

HT1296 Can I sync my new iPad with my iTunes from the cloud?

Can I sync my new iPad with my iTunes from the cloud?

Sync what sort of content ? You should be able to keep contacts and bookmarks between the two, but you can't directly copy music or films/tv shows between them - you will either need to sync those via your computer's iTunes, or if they are iTunes purchases and you are in a country where they can be redownloaded then they might show in the Purchased tab in the iTunes store app on your iPad

My iPad will not charge from the wall outlet or the USB. I also used three different chargers, as well as rebooting my iPad several times.

My iPad will not charge from the wall outlet or the USB. I also used three different chargers, as well as rebooting my iPad several times.

Then it's time to make an appointment at your Apple Genius Bar at your Apple Store. Apple will check it out and if it's defective and still in waranty (you don't say which model you have), it will be replaced.

Just got new iPad could not restore from iCloud because of operating system had to set up as new to upgrade now how do I get back to restore from the cloud?

Similar Messages

Maybe you are looking for