JVM is invalid after logoff from the windows

Hello,
I have one problem using JNI inside C++. I create JVM inside C++ and launch the application as service, then I log out from windows and leave the process running. I found that the JVM is not valid after I log out although the process is still running. It gives 0xC0000005 access violation exception when any method on JVM is invoked. I tried to call AttachCurrentThread on the JVM, but it fails as well. It seems that the JNIEnv* is also corrupted.
Did anyone encounter the same problem?
Thanks.

Try reading the C source code of the following products that can launch Java applications as services and check what you've done wrong. It's good to learn from people that have had the same problems as you.
- Jakarta Apache Commons Daemon ( http://jakarta.apache.org/commons/daemon/ ) - it is used by Tomcat when running as a service.
- JavaService from Alexandria Software Consulting - recommended by JBoss if you want to run JBoss as a service.

Similar Messages

I can't boot from the windows cd with boot camp

I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How can i change the class in the Class Library project to be static or public so i can use it from the windows application project ?

First i know that when i make any changes to the class library project i need to rebuild the project then to remove the Capture.dll from the TestScreenshot project and then to add again the updated Capture.dll
The problem for example in this case i'm trying to use a public static variable i add in the DXHookD3D9.
In the DXHookD3D9 i added this public static variable:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
//using SlimDX.Direct3D9;
using EasyHook;
using System.Runtime.InteropServices;
using System.IO;
using System.Threading;
using System.Drawing;
using Capture.Interface;
using SharpDX.Direct3D9;
namespace Capture.Hook
internal class DXHookD3D9: BaseDXHook
public DXHookD3D9(CaptureInterface ssInterface)
: base(ssInterface)
LocalHook Direct3DDevice_EndSceneHook = null;
LocalHook Direct3DDevice_ResetHook = null;
LocalHook Direct3DDevice_PresentHook = null;
LocalHook Direct3DDeviceEx_PresentExHook = null;
object _lockRenderTarget = new object();
Surface _renderTarget;
public static decimal framesperhourtodisplay = 0;
protected override string HookName
get
return "DXHookD3D9";
List<IntPtr> id3dDeviceFunctionAddresses = new List<IntPtr>(
framesperhourtodisplay
The problem is i can't even get to the Capture.Hook namespace and not to the DXHookD3D9 from the TestScreenshot application window project.
This is a screenshot:
For example fro the FramesPerSecond class i can use it get to it from the windows forms application.
namespace Capture.Hook
/// <summary>
/// Used to determine the FPS
/// </summary>
public class FramesPerSecond
int _frames = 0;
int _lastTickCount = 0;
float _lastFrameRate = 0;
Since it's public i guess.
But if i will change the DXHookD3D9 class from internal to public:
public class DXHookD3D9: BaseDXHook
I will get error on the DXHookD3D9:
Error 1
Inconsistent accessibility: base class 'Capture.Hook.BaseDXHook' is less accessible than class 'Capture.Hook.DXHookD3D9'
And the BaseDXHook class:
namespace Capture.Hook
internal abstract class BaseDXHook: IDXHook
protected readonly ClientCaptureInterfaceEventProxy InterfaceEventProxy = new ClientCaptureInterfaceEventProxy();
public BaseDXHook(CaptureInterface ssInterface)
this.Interface = ssInterface;
this.Timer = new Stopwatch();
this.Timer.Start();
this.FPS = new FramesPerSecond();
Interface.ScreenshotRequested += InterfaceEventProxy.ScreenshotRequestedProxyHandler;
Interface.DisplayText += InterfaceEventProxy.DisplayTextProxyHandler;
InterfaceEventProxy.ScreenshotRequested += new ScreenshotRequestedEvent(InterfaceEventProxy_ScreenshotRequested);
InterfaceEventProxy.DisplayText += new DisplayTextEvent(InterfaceEventProxy_DisplayText);
~BaseDXHook()
Dispose(false);
How can i solve it so i can use the variable framesperhourtodisplay in the DXHookD3D9 class with the TestScreenshot windows forms application ?

Hi,
I dont know if it will work here, since I dont know the complete structure, but the base call must be public, if the derived class is public, so the base class is at least as accessible as the derived class.
Try make the base class public. (And maybe the base-class IDXHook of the base also...)
Or use a different approach and make only the properties public that are needed to be public by adding an extra class...
A structure could look like:(you need to create a class thats public in your dll and expose a property, and set this property in the internal class...)
In the Accessing class (here Form1)
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
C c = new C();
MessageBox.Show(B.F.ToString());
and in the class Lib:
internal class A
public A()
B.F = DateTime.Now.Millisecond;
public class B
public static int F { get; set; }
public class C
public C()
A a = new A();
(add a referenc to the class lib from the accessing project)
Regards,
Thorsten

After I installed the windows 8.1 update, podcasts and music won't play

After I installed the windows 8.1 update, itunes stopped playing. When I try to play, it brings up the song but stays at 0:00. My subscribed podcasts still download but they all stay at 0:00 too. I can click on a later point in the song/podcast and it moves to that point but just stays there as if it is paused but indicating it is playing in the controls.
I have unistalled/reinstalled itunes and have the same problem.

Hi there Juniorm1,
Take a look at the article for the current version of iTunes for Windows.
iTunes 11.1.5 for Windows (64-bit)
http://support.apple.com/kb/dl1615
-Griff W.

Installing Windows 7 on my bootcamp partition (mid-2009 mac book pro with mountain lion) My computer won't boot from the Windows 7 Install DVD.

Hello,
I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
Any advice would be very appreciated.
Thanks.

What kind of an install DVD are you using for Windows?
You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
Allan

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Viewing more than 9 Forms from the Window Menu Item

Hi,
I would like to know if you can list more than 9 Forms at one time from the Windows Menu Item before you have to select the MORE WINDOWS option to display the entire list of currently opened forms.
Can this be set in the .mmb or some config file?
It would be nice to have a list of about 12 Forms to choose from at one time before selecting the MORE WINDOWS option.
Christina.

Hi Frank,
The Forms version our system uses is Oracle Forms 6i.
A user would like to know if this scenario is possible during runtime.
However, I would like to know what modifications can I make during design time to make this possible.
Thanks.
Christina.

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

Lisa,
You may try the list (or go straight to 6) if you have updated to Yosemite without reinstalling).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I'm looking to use Bootcamp on my iMac 24". If I download Windows 7 from the Windows website, can I properly install it to my Mac? Do I need the disks instead?

I'm looking to use Bootcamp on my iMac 24". If I download Windows 7 from the Windows website, can I properly install it to my Mac? Do I need the disks instead?
I'm hoping to download it from their website because I can pay $30 for the student discount instead of $119...

When burning the .iso file to a disc restrict the burn-speed to 2x
Otherwise the disc will most likely not work.
It's a common phenomenon on Macs.
Regards
Stefan

How to Invoke tasks created in FrameMaker Publishing Server from the Windows command line

Hi All ,
i would like to know how can we Invoke tasks and schedules created in FrameMaker Publishing Server from the Windows command line.
we used publishing server mainly to convert Frame maker files into PDF and that should be do progarmatically without manual intervention on Demand.
so could you please let us know how can i invoke rthe task creted to convert FM file to PDF in FrameMaker Publishing Server from the Windows command line.
please let me know the command to execute .
thank you and waiting for valuable response.
best regards
Ramesh babu

Please see http://blogs.adobe.com/techcomm/2011/03/adobe-framemaker-server-10-and-its-command-line-ca pability.html for the same.
Harish Dhawan

Running class files from the windows command line...

Hello Everyone,
My instructor showed us a way to run class files from the windows command line. However every time I try to run the class file from the command line using a command like: java CruiseHelper.class
I get an error that states "Exception in thread "main" java.lang.NoClassDefFoundError: CruiseHelper/class"

Hello Everyone,
My instructor showed us a way to run class files from
the windows command line. However every time I try
to run the class file from the command line using a
command like: java CruiseHelper.class
I get an error that states "Exception in thread
"main" java.lang.NoClassDefFoundError:
CruiseHelper/class"Classes are not file names. You don't have a class named "CruiseHelper.class", that's a file name. The class name is just CruiseHelper (if you have no package statement in it).
So,
java -classpath . CruiseHelper

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

JVM is invalid after logoff from the windows

Similar Messages

Maybe you are looking for