K7T won't take Win XP Pro w/ GeForce2?

?( I got The K7T Turbo, and Geforce2 MX/400 Vid card, trying to install Win XP pro and when it checks the compatibility of my sys it says that it will not install because it found a conflict between my motherboard and my video card, but it doesn't say what the conflict is. I checked for ghost drivers and found one for the old vid card (Voodoo 5500) and got rid of it but still same problem, already tried reinstalling drivers...four times, still no fix, is there something between the K7T and G2 that i don't know about or what, I'm at a complete loss here, ;( any help will be richly rewarded with tons of cash that I don't have and won't be able to give you.

:: smacks self in head repeatedly ::why didn't i think of that?, I have no idea if there's anything there right now, i gotta go home and check, the memories of putting that thing together are beer fuzzy, someone else once suggested installing a generic vid driver for now till i get XP in...would that be a "healthy choice"..?...please note that the previous comment of "Healthy Choice" holds no relation to "Healthy Choice " food products which are Nutritious without sacrificing taste resulting in a delicious meal for the whole family.......ummm....too much red bule and starbucks...gosh I hope I don't get sue'd today 8o

Similar Messages

Itunes won't run, Win 7 Pro 64 Bit

Itunes 11.0.1 will not run. For that matter 10.X won't run either. I am running Windows 7 Pro 64 Bit. Multiple uninstall's and reinstalls, still no joy. I am extremely displeased (I own 5 Apple products crippled by this).

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

ITunes on Win 7 Pro won't recognise iPhone

iPhone 4 S is 12 months old next month.
OS is 7.0.2
iTunes vers is: 11.1.0.126
Computer OS is Win 7 Pro (anti virus is Microsoft Essentials, Firewall is ZoneAlarm)
I have manged to connect the phone to iTunes ... so there is a backup. However, that was a while ago and it's pot luck.
Even when I did connect it required several plugging and unplugging to get a connection.
NB - the computer is recognising the iPhone as I can d/load pictures from Photos and charge via the computer.
(As a clue: wall charge also requires often 6 plug in and out before it connects and begins charging so I use the computer mostly).
I've been through the list provided by Apple Help.
Also I remove Apple from devices so that it installs afresh.
And I have Stopped and Restarted Apple Mobile Device.
I have tried with firewall off (but when it did connect ages ago same firewall was on)
Unable to turn off MSE and really ought not have to uninstall.
So ... if you are into a techie challenge please take on my case.
No offence intended but not interested in amateur good ideas like "try another usb port" (have tried main and subsidiary port)....
I'm franly disappointed, frustrated and tired of the process but remain open to expert input.
thx for reading this post and should you offer expert advice then in advance may I thank you.
best wishes,

Never mind answering this question. I was able to figure out a way to fix the problem on my own. All I needed to do was install the Itunes update by itself and then I was able to open Itunes with no trouble.

2nd generation shuffle won't take charge, not recognized by mac pro.

2nd generation shuffle won't take charge, is not recognized by mac pro. light will not go on

Hi nickh2913,
If you are having issues with your 2nd Gen iPod Shuffle, you may want to try the steps in the following Troubleshooting Assistant:
Apple Support: iPod shuffle (2nd generation) Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/shuffle2gen/
Regards,
- Brenden

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?

Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.

HT1918 when attempting to log into my account on itunes it ask for my password! I put my password in then I get the prompt again asking for my apple password! I put it in again and it still won't take!! What can be going on? I'm trying on my Mac pro !! Ev

when attempting to log into my account on itunes it ask for my password! I put my password in then I get the prompt again asking for my apple password! I put it in again and it still won't take!! What can be going on? I'm trying on my Mac pro !! Everything is up to date on the the latest Itunes version!!

Hello CarenzaRielle,
I know not being able to access your Apple ID can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Refer to the Apple ID Support page if you are unable to reset your password using the steps in this article. If you know your Apple ID password, you can also choose to change your Apple ID or change your password.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do

My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?

You have a HDD problem (hopefully you have a backup). Start with the information on this support article:
https://support.apple.com/kb/TS1440
Ciao.

Satellite A30, Win XP Pro SP3 - modem won't work

Another issue with this A30 Satellite notebook
The built in modem doesn't work.
*Explanation:*
The driver is correct and downloaded from the Toshiba support site.
The modem is identified as 'Toshiba software modem amr' and is setted on com3 port.
When I click on 'diagnostic' and 'ask modem' (the right labels may be different, since my is an Italian win xp, I just translated the Italian labels), a window appears saying it's impossible to open the door (port) which the modem is connected to.
I have tried to change the modem com port to different numbers but the problem is the same.
I don't know whether the modem is an actual board connected in some way to the main board or is just built on the main board. If it would be the first case, I could change it ad see. btw, the mini pci slot is already occupied by the gigabyte Wi-Fi board, so the modem must be somewhere else.
It is strange, since I did at least 2 other win xp pro installations on this machine, always downloading and installing the proper drivers, and the modem never has worked.
Thanks
S.

Hi
This old Satellite A30 was offered with Windows XP Home Edition/Professional SP1 so maybe you should install WXP SP1 and then all other stuff following original installation order.
Installations order for WXP.
1. Chipset Driver
2. Microsoft Updates
3. Display Driver
4. Sound Driver
5. Touch pad Driver
6. Network Driver
7. CardBus Driver
8. Modem Driver
9. V.92 Modem Driver
10. Wireless Network Driver
11. Atheros Client Utility
12. Infrared Driver
13. Power Management
14. E-Key Utility
15. Easy Button Utility
16. cPad/Touch pad On-Off Utility
17. Console
18. ConfigFree
19. Skins for Windows Media Player
20. User`s Manual
21. DVD Player
22. Drag'n Drop
23. Sun Java Runtime Environment
24. Screensaver
25. Wallpapers

Problems migrating my Win XP Pro laptop to new MacBook Pro

My new MacBook Pro arrived this week a few weeks after the VMWare Fusion 2.0 software, both purchased online from The Apple Store, and I started the process of porting my Win XP Pro Dell laptop to the new Mac using VM Ware Converter and Fusion. The migrated PC virtual machine won't boot up on the Mac. A pop-up message from that VM said Windows is shutting down because it says it's incompatible with the SCSI drivers inside the virtual machine, which appear to be installed by VM Ware:
Your guest operating system is Windows XP and you have one or more virtual SCSI devices installed in your virtual machine.
Please be aware that Windows XP does not support the BusLogic SCSI adapter that VMware Fusion currently uses for its virtual SCSI devices. If you have not done so already, you will need to install our driver in the virtual machine. You can download the driver from our Web site at "http://vmware.com/info?id=43".
Click OK to continue or Cancel to abort.
-- I can only start up Windows on the VM in Safe mode, which won't accept the installation of VM Ware Tools, which I assume is what can install this driver easily on the VM. I tried to uninstall the SCSI drivers inside Windows and reboot the virtual machine, but it didn't take. I then tried redoing the VM conversion from the Dell and selecting Install VM Tools from the get-go; that only had the effect of blowing my entire Sunday night, as the conversion takes about 2 hours.
-- That link above from the error message isn't to a page for the exact driver required; it just takes you to the generic home page for downloads of ANY VMware product. I also tried to look for a driver to download from the Web site onto the source machine, but the docs and directions and software seem to be geared to enterprise customers. I'm just sitting here in my pajamas at the kitchen table; I don't have servers, or floppy drives, or understand half of the vocabulary. I'm not even exactly sure what the "host computer" they talk about is in this scenario -- the source machine? The destination machine that hosts the VM?
I also posted this at VM Ware's forums -- but I'm throwing it out here too in case other new Mac users are having issues like this one and have any advice. I'd like to use the Mac as both a Mac and a PC and would hate to have to just run it as a Windows machine with BootCamp, but it's looking like that might be the way to go unless I can unsnarl this issue; I hear that Parallels isn't any easier to deal with, but that might be also something to try.

Actually, Apple does not sell VM Fusion. VM Fusion is a product of VMWare. You purchased it from an Apple Store that included it in the sale. This was provided by the store's manager, not by Apple. Apple itself does not sell VM Fusion nor include it with any computer sold on the Online Store. Apple provides no tech support for any third-party products, not even those included with pre-bundled software such as Quicken.
There is no VM Fusion forum that's part of the Apple Discussions although there is a Windows forum and a Boot Camp forum that provides support for Boot Camp which is a part of OS X.
If you need VM Fusion support your best bet is to visit their support forum. Same for Parallels Desktop for Mac.

Win XP Pro to Win 7 for 64 OS

I want to upgrade from Win XP Pro to Win 7 to take advantage of it's 64 bit OS capability and to go beyond the 3GB ram limitation in XP Pro. Do the applications in the CS4 Design Premium utilize the additional ram if I have 12GB of ram in my computer and the power of 64 bit processing?

Bob,
Thanks for the quick reply. So, if I understand your comments correctly, each of the CS4 apps will run with 2GB of ram and Photoshop is the only one that runs in 64 bit if I were to install Win 7. I won't be running multiple apps but plan to install 12 GB of ram to get some more robust performance out of some apps and try to avoid "out of memory" issues when working with large files.
For example, I scan drawings in TIFF format for archiving and then open them in Photoshop to convert to jpg for modification. These color scanned images are many times 36 x 48 plans @ 200 dpi and generally range from 1GB to 1.5GB in size. Oftentimes if they are in TIFF format I can't do a save as because of an out of memory alert.
Thanks again.
D

Steps to be taken if Win XP Pro has to be reinstalled on the desktop attached to WRT54GX2 router...

I have to reinstall Win XP Pro on my primary desktop PC attached to the WRT54GX2 router due to virus/trojan issues. The router is running V22 of the firmware I believe. I will have to reformat the hard drive on the primary PC attached to the router. I have two other desktops that have WMP54GX wireless adapters that are running fine. I've created a config backup file for the WRT54GX2's current config if needed. Can someone give a link or clear step-by-step instructions on what steps I'll need to take after Win XP Pro is reinstalled on the primary PC to reestablish my network. Will I need to config backup file at all or will the router/wireless adapters be largely unaffected by the OS reinstall? Thanks in advance, Chris

Hi!
Chris,
If in case you reinstall the O.S of the wired P.C..... In Normal cases you don't have to do anything with the router.........because the router does not install any settings on a P.C .
Once you have reinstalled the O.S(operating system)..does powercycle the entire network(i.e first unplug the power from the router...then the powercable from the modem....wait for 30 sec..and then power on the modem first...wait for the lights on the modem to become stable and plug in the router...) and your P.C should be able to connect to the internet..
And as your wireless P.C's are working fine you don't have to work on them at all..
If in Case you still face any issues...Revert Back to me!!

Win 7 Pro not connecting to remote Win 7 pro via port 3389

I have a new Dell XPS 8700 Win Pro 64 bit that will not connect to work machine of same specs, i.e, XPS 8700 Win 7 Pro. Ironically an old lap top running XP Pro
will connect to work computer. I have a new Dell laptop with Win 8.1 pro that will not connect either. I tried everything, uninstalled Symantec End point, shut off the Windows Firewall, did a complete
hardware check via Dell Diagnostics, made sure network discovery was on as well as all remote services, turned on RD, changed every setting on the RD dialog box, pinged the external IP and it timed out. None of the forums seem to have an answer and I
am at wits end. I set up 15 machines at work under Win 7 for RD and all are working with Win 7 Pro.

Hello Al Wayne,
What is your current situation?
Please share us more information for better analyzation as Frederik Long mentioned.
Do you mean that the Dell XPS 8700 and laptop can’t RDP to work Windows 7 machines, but the Windows XP laptop can RDP to?
Please take the following steps for troubleshooting:
1. Share us the result of command ipconfig /all in the source and destination computers
2. Check if we can ping the Windows 7 machines from the Dell XPS 8700 and laptop
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Windows Update Loop - Win 7 Pro - x64 :: Error 80071A91

Hi, I've been referred to this forum by the Microsoft community from this post: answers.microsoft.com /en-us/windows/forum/windows_7-system/windows-update-loop-win-7-pro-x64-error-80071a91/b17c5bc5-7977-4f8b-9b45-ecb265886381 (same as below)
Any assistance is appreciated. dave_ned at hotmail.com.
Hi,
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again"
I've got the error (80071A91) that others have experiences while trying windows update and for the life of me I cannot get the updates to install.
Looking for the past 4 hours via Google, trying different recommended things and still no luck
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-f964-4376-bfab-2f29ea127c6a
# SFC /scannow causes the "repair status message" and asks for reboot.
I've downloaded fix-it, tried booting into a system repair/restore disk using command line to run
#sfc /scannow /offline....
using the dispart to LIST VOLUMES (based on this http://mikemstech.blogspot.com.au/2011/12/how-to-perform-offline-system-integrity.html )
I've tried #fsutils resourse set autorevert=true (or something, can't find the exact post as I've rebooted so many times)
I've tried dismc.exe (or similar without success)
Basically I'm stuck with these updates (~10 of them) always sitting there downloading, installing every time I shut down the PC.
Running a system repair disk created in windows still does not allow #sfc /scannow....
My Last system restore was 04/08/14 and I cannot even restore the system to this point as the restore fails and asks to remove itself once I restart the system.
Details:
OEM version of windows purchased legally and genuine microsoft logo in system dashboard.
Intel Core I5 -3330
16GB RAM
Windows 7 Pro - 64bit OS
Service pack 1
**NOTE** I have the C drive hooked up in RAID 0. Two(2) * 60GB SSD disks in RAID 0 used as C: via BIOS RAID
Secondary storage disk a D:
Been working and updating fine for the past 5-6 months.
I have the Optical drive setup as O: and a Daemon tools virtual drive as drive E:
While running DISKPART and using LIST VOLUME I see this:
currently the system seems to have lost all update history
Any information or help on this is appreciated. I don't want to reformat and reinstall, I don't really want to 'repair' and wipe my current software installation so I'm hoping there is a way.
Anyway I can get the 'pending state' removed.?
Thanks in advance
David

Hi, I've rebooted into Repair mode (Console), (because repair said windows is installed on E:) run dism.exe /image:E:\ /cleanup-image /revertpendingactions
This gave a message about small scratch space but did say something out a fix. Upon reboot into safemode with console I received the same message
"C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
I then rebooted and tried SCF again, no luck... Same message, same updates still sitting there.
Partition info: (as mentioned earlier C is in RAID 0 with 2 SSD disks)
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 O DVD-ROM 0 B No Media
Volume 1 E DVD-ROM 0 B No Media
Volume 2 System Rese NTFS Partition 100 MB Healthy System
Volume 3 C NTFS Partition 111 GB Healthy Boot
Volume 4 D GB320 NTFS Partition 298 GB Healthy

Lightroom 5.6 on Win 7 Pro 64 bit SP1 tying up CPUs, running very slowly

Hi,
I have Lightroom 5.6. Whenever I use the Spot removal, Graduated filter, Radial filter or Adjustment brush tools in the develop module, it ties up the 6 CPU cores (as viewed in Task Manager) so everything goes very slowly. For example, the effect of a stroke with the Adjustment brush only appears on screen after 5 seconds or more. Sometimes it gets so bad that I have to kill the process and restart Lightroom. It affects other programs running at the same time, as they can't get enough CPU. It is basically unusable. An edit that should take five minutes can take an hour.
The problem happens when I either
In the Library module I select an image that I have previously used the tools mentioned above on
or
In the Develop module when I use those tools.
It is not just an issue with Lr 5.6 - previous versions also did this on my system.
My workflow is:
Browse the library module, adding images to a collection (Canon EOS 7D raw)
For each image in the collection I:
Select the image
Create a virtual copy
Stack the original and copy together
Edit the copy
Export AdobeRGB 16 bit PSD to Photoshop for sharpening and conversion to CMYK
Place the image into my InDesign document
I occasionally use Perfect Photo Suite 8.x on my images from within Lightroom.
I have been a software developer for over 30 years, so I'm not doing anything stupid. Lightroom is just spinning the CPU cores to no effect, like it has a thread or threads in an infinite loop.
I typically have Lightroom, Photoshop (CC or CS6) and InDesign CS6 running at the same time. All three together occupy just over half of the available RAM.
I have a prettty fast machine (see the specs below) and other software does not tie it up like this (except rendering video in Pr or Ae, which I expect).
I have tried googling for an answer, with no success.
I feel this is an issue that Adobe ought to provide technical assistance for, given the technical nature and severity of the problem.
Please help.
Machine details:
Windows 7 Professional 64 bit, Service pack 1, all updates applied
Processor AMD Phenom(tm) II X6 1055T Processor
Memory (RAM) 16.0 GB
Graphics NVIDIA GeForce GTX 780 3GB
Primary hard disk 71GB Free (209GB Total)
Disk Storage Total: 5.9 TB

Thank you curve8530curve8330 for stepping up and helping me out ...
I think I'll try re-installing the BB Desktop Software 7.1.0.41 ... the ' ... no BB Device Software installed ... ' GUI message has me concerned that there has been a Registry disconnect somehow involving the USB driver software registered with BB D. S. 7 ... this would indeed be a Windows 7 problem ... I'll update the thread and give you credit for pointing me in this direction ... if it works.
However, to be clear, I am connecting my 9630 using a USB interface cable connected to a USB 2.0 port on the Win 7 system ... I am not removing the 8GB MicroSDHC card from the phone and then utilizing a MicroSD to SD adapter or SD port ... whatsoever.
And , as for connecting via another computer, now that I have thought about this some more, that may have been what precipitated the problem in the first place ... I had experimentally tried re-connecting the 9630 to an XP Pro SP3 32-bit notebook loaded with BB D. M. 5.0.1.28 ... (after never having done so again since the Win 7 Pro SP1 64-bit / BB D. S. 7.1.0.41 system came into use). I don't see, off-hand, how that could have caused this issue, however, the coincidence is too large to ignore.
FFF

Fresh Install of Win XP Pro SATA Driver's don't work

Hello
I apologise first of all if this is posted in the wrong forum but as this is the motherboard I am using here goes: ( System configuration is in signature)
I recently purchased a Seagate SATA HDD 160gb and fitted to the VIA 8237 chipset Sata_1 connection. Then the problems begin...
SATA is enabled in the BIOS onchip (not the Promise controller)
Press F6 during installation of Win XP Pro and install VIA 8237 SATA RAID driver - from USB external floppy drive - for Win XP and continue installation. After Formatting the hard drive the installation now asks for me to insert the diskette again and press enter 'Please insert the VIA Combo RAID Driver Diskette', and I do so and press enter...nothing happens!!! I have tried using the disk provided with the board and have also made a disk from the drives at the MSI website, both to no avail.
I have also tried this process with the Promise controller i.e. attaching the drive to the Ser_3 connection and installing the drivers from the floppy during XP install and yet again I am requested to insert the floppy labelled Promise 579/518 Controller, and again when I do nothing happens.
I would appreciate any help you could give as I now have no PC to use and want to get this sorted asap.
Thanks

I have always left the floppy in the drive from boot, only trying otherwise when it kept failing. However could it be to do with the fact this is an external Floppy drive connected by USB that it wont take it? I notice there is not any activity from the floppy drive, no matter whether I take the disk out and re-insert or just leave it there.

K7T won't take Win XP Pro w/ GeForce2?

Similar Messages

Maybe you are looking for