K9NGM - board version 1.1 NOT 1.1a... CPU Upgrade Qs

Hi
I want to upgrade my cpu to the fastest it can take. I have the 1.1 version mobo and everything I have read talks about 1.1a. I've read through many many posts but can not find any ref to the earlier mobo so I am a bit worried!
Some questions please:
1- exactly what cpus can my, earlier, mobo take?
2 - do i need to update my bios?
3 - if humanly possible i don't want to reinstall windows (running xp pro 32bit) so what are my choices?
4 - is there a simple guide anywhere to help me through it?
Thanks in advance

It already has been answered few times till now:
Quote from: BOSSKILLER on 10-April-08, 06:23:21
"From the list referred to earlier which are the 89w ones?"
Look here for the list as Aaron already link: http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=256&maincat_no=1#menu
Watts are listed per each CPU, its listed which one is supported and which one is not.
"Do i need to change my XP if i install a dual core processor?"
What you mean? If you mean to re-install XP: Usually no, but depend sometimes works other time not.
"I had understood that my mobo will only take a cpu up to 89w anyway! "
No, 89W and below, check the CPU Compatibility list again: http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=256&maincat_no=1#menu
"Do I not have to do a completely fresh install of XP if i change to a dual core?"
If you able to swap HAL mode then no, else do a new fresh installation

Similar Messages

Hypertext link in email opens my previous version of Firefox, not the one I upgraded to.

Greetings, each time I upgrade to the newest version of Firefox I'm running into this problem. If I open the browser directly, it opens the newest version. If I click a hypertext link in my email, it opens my previous version and I get a message saying I need to upgrade. How do I fix this?

I also had this problem. After the hint from jsher2000 above, I checked the add-ons.
It's still called "AVG Safe Search" in the Add-ons Manager in Firefox. (Either under Tools/Add-ons or under the orange "Firefox": Add-ons (Or Ctrl-shift A)
I found AVG Safe Search disabled in my list of add ons, and enabled it.
Voila, the icons now appeared in the searches!

Tecra A11-11N does not boot after CPU upgrade

Hi,
I would like to do a processor upgrade for my Tecra A11 11N from the i5-430M to a probably much faster i5.I thought the i5-580M would do, but the laptop did not boot when i installed this processor.
I reverted back to the 430M, did some research on the internet and found out that the 580M has a very high FSB speed and that is what probably made it not to work/incompatible with my machine.
http://ark.intel.com/products/43537/
http://ark.intel.com/products/49653
http://ark.intel.com/products/49652
and also at http://ark.intel.com/
Now i went back to the computer shop,returned the 580M and got an i5-560M as i compared it's specs and saw it would be compatible as it has the same FSB speed with the 430M.
I then later on in the day tried to install this cpu as an upgrade BUT alas!
It STILL WON'T BOOT ALSO.
I was left dumfounded.Processors in the same familly line are supposed to be compatible with one another provided:Lithography, FSB and socket type are similar.
Or what am i missing here?
I have done processor upgrades in many instances for both desktops and laptops and this is the first one that has left me with no words to say!
please offer some help/advice.
Simon
+Message was edited+

I solved this processor upgrade problem on my own.
I did some little research on what limits processor upgradability on computers and i
found out that BIOS was one of the factors that play a key part.
So,i went on a mission
to see if i could upgrade my BIOS and whether it would solve my problem.
I found this link to be very informative:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66624
I then downloaded the latest BIOS version for my laptop from this link:
http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp
The following link gave me proof that the BIOS update would not bring any problems to my
machine and that there is already someone who had done it and not encountered any problems.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62459
Just to make sure that you are on the safe side,before carrying out the procedure to update
your BIOS,make sure you have a fully charged battery in addition to the AC plugged in.A power
outtage during this procedure would instantly kill your machine.
The BIOS installation took less than 3 mins.I copied the executable on the desktop and run it
from there.
On rebooting,the new BIOS was installed.The new BIOS version was 3.40 dated on 05/18/2012 while
the older one was version 2.0 dated on 04/03/2010.
From Intel's website,the i5-430M was released on Q1 2010 while the i5-560M and i5-580M were
released on Q3 2010.
It is pretty obvious that by the time BIOS version 2.0 was release,these two newer processors
had not been released and that explains why they were not being recognized when i installed them.
I finally swapped the 430M with the 560M,assembled back the machine and powered it.
Voil!,the machine booted to it's new life.Everything is as was before!
So far i have not seen any problems even to do with overheating or the cooling fan spinning any
faster that before.It is all the same as before.There is considerable performance gain with the
uprade.I am a software developer and my various development enviroments including compilers,
debuggers,database and deployment servers have all been running way way faster than they were!
I believe the 580M can also work but unfortunately i had returned it back to the shop.
There is no reason for buying new machines when we can upgrade the ones we have.What will
happen to the older ones?This means more electronic waste and so does new machines.Let us try
to make better use of the ones we have a in turn,SAVE OUR ONLY PLANET EARTH FROM GLOBAL WARMING!

Satellite M40x will not boot up after CPU upgrade test

I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
Anyone have any ideas on what is causing this??

Im not surprised.
As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
So possibly this is a reason for the no booting.
I think more details you will get from the service guys in your country

ERROR: [Hsi 55-1594] Core lwip141 of version 2.2 not found in repositories (can't modify BSP)

While trying to modify the BSP setting for the socket_apps_bsp (socket_apps reference design from: XAPP1026) I got the following error (after clicking the "Modify this BSP's Settings" button):
The following errors were found parsing C:\Kintex-7\ref_design_32K\socket_apps_bsp\system.mss
ERROR: [Hsi 55-1594] Core lwip141 of version 2.2 not found in repositories
Not sure what this is supposed to mean or what the fix is. I'm running the 2014.3 SDK and I'm using the reference design from last week (dated 10-24-2014, I believe). I can run the webserver in that reference design on the microblaze ok, I see the webpage displyed, however, I do not see the LEDs toggle when pushing the LED Toggle button. I traced this to this section of code in the platform_gpios.c file:
#include "xparameters.h"
#if defined(XPAR_LEDS_8BITS_BASEADDR)
#define LED_BASE XPAR_LEDS_8BITS_BASEADDR
#elif defined(XPAR_LEDS_4BITS_BASEADDR)
#define LED_BASE XPAR_LEDS_4BITS_BASEADDR
#elif defined(XPAR_LEDS_6BIT_BASEADDR)
#define LED_BASE XPAR_LEDS_6BIT_BASEADDR
#else
#define NO_GPIOS
#endif
The #define NO_GPIOS gets defined there because none of the definitions that are checked from teh xparameters.h file are defined and so no LEDs actually get toggled. So I figured I would need to somehow change this in the BSP, hence I ran into the problem above. If there is another way to set either XPAR_LEDS_8BITS_BASEADDR, XPAR_LEDS_4BITS_BASEADDR, XPAR_LEDS_6BIT_BASEADDR I'd be interested in finding that out as well. (I'm using the KC-705 board, which of those should be defined?)

I have exactly the same problem and ther is no reply here.. could you solve this issue?? thank you so much!

Version 1 is not getting activated in PR and PO

We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
Full points will be awarded.

Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Dear Amir,
in pr version management , control data :select version active,version 0 ok, & external ok. &
field selection : reason required,short text req., requester req., external number & posting date are optional & save.
even with release strategy there is no problem
create a pr & save it.After release it. change the pr
after u canfind the versions 0 & 1.
in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
in category u have to maintain f(is for po) & save it.
create a po & save it.After release it. change the po
after u canfind the versions 0 & 1.
Regard's
Raj.

Why will the new version of picasa not work on my imac

Why will my upgraded version of picasa not work on my IMac???HELP
It will start to load and then error message and cuts off. ( Picasa is photo editing software)

Picasa is not an Apple product.
You should ask the developers why they have not updated their application.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT

I've upgraded to 6.0.1 and now firefox no longer loades AT ALL. I get this XULRunner error: Platform version "5.0" not compatable with minVersion = 6.0.1 and maxVersion = 6.0.1. What can I do to get Firefox working again as my browser?

After deleting everything, I've also tried to reload 3.6.12 fresh and I get a totally different nss3.dll entry point cannot be found error.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

i am learning SAP PP and i hv ides 4.7,
now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
analysis of error gives following message:
Activation of the indicator is not permitted
Message no. KT253
Diagnosis
You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
Note
The following should be taken into account when maintaining a version:
In general version definition you decide whether a version is allowed for
     Panning (with the Plan indicator)
     Actual data update (with the Actual indicator)
Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
     A data version from results and WIP determination manages (indicator WIP)
     Another version from variance determination manages (indicator Variance)
     A version for exclusive use (field exclusive application)
You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
To set indicators WIP/Results- or Variance-determination the following conditions apply:
     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
     If the actual indicator is active, then both indicators must be activated
Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
     The actual indicator may not be activated in version 1.
If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
3. You want to maintain version 0 or 1. The restrictions outlined above apply.
Use the "Extras" menu option to display the structure of the entries in the complex data object version:
     Select a version and choose Extras -> Version use.
The SAP System shows which controlling areas use this version.
     Select Extras -> Versions in CO area
This displays all versions used in the current controlling area.
The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
Procedure
Do not activate the indicator, or change the higher order of settings in the general version definition.

Raj,
What are you trying to change?
To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
Regards,
Prasobh

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Chararacteristic 0CALQUARTER is available in version M but not in version D

Dear Sirs
I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.
(Yes, the word characteristic is misspelled in the message text)
There is no more detailed information so I'm stuck..Please help.
With best regards
Manuel

Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute

I am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

i am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

See this for Windows... http://support.apple.com/kb/TS1538
and this for Mac OS X... http://support.apple.com/kb/TS1591

K9NGM - board version 1.1 NOT 1.1a... CPU Upgrade Qs

Similar Messages

Maybe you are looking for