Kde control center sound i/o method
I just installed arch 0.5, and had some problems getting ALSA set up. After reading through this forum and several others, I managed to get it set up properly (I think).
However, when I go to the KDE control center>>sound>>sound i/o, I don't see an option for ALSA. When I had Mandrake 9.1 installed, it was there.
Do I have to do something special to get the ALSA option to show up? Do others out there running Arch have that option? I added the alsa drivers to modules.conf and do see them when I run lsmod. Is there something else I need to do to use alsa in KDE?
Thanks!
no i dont think so ... my modules.conf-sound-part looks like this:
#### SOUND #####
# the specific part:
snd_index=0
options snd snd_cards_limit=1 snd_major=116
alias snd-card-0 i810_audio
# and some things for the general sound support:
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
i'm using the "i810_audio" module, as oyu can see ... and with this OSS works for me --- adapt this for you --- and in the KDE-aRTs-dialog(the one in the control center) just select "Autodetect"
-> one more thing: be sure you have access to /dev/dsp (either chmod in /eth/rc.local or make a usergroup sound that owns it)
Similar Messages
-
Since update to gnome 3.4 gnome-control-center and sound broken
Hi,
I updated from 3.2 to 3.4 using sudo pacman -Syu.
Since the update there are many things broken.
I don't have any sound and when I try to start the gnome settings I get following:
gnome-control-center
*** glibc detected *** gnome-control-center: free(): invalid pointer: 0x00007feb2de284d8 ***
======= Backtrace: =========
/lib/libc.so.6(+0x78a56)[0x7feb49760a56]
/usr/lib/libstdc++.so.6(_ZNSs7reserveEm+0x68)[0x7feb360795d8]
/usr/lib/libstdc++.so.6(_ZNSs6appendEPKcm+0xb5)[0x7feb36079865]
/usr/lib/xorg/modules/dri/r600_dri.so(_ZN4llvm3sys13getHostTripleEv+0xbe)[0x7feb2f27667e]
/usr/lib/xorg/modules/dri/r600_dri.so(_ZN4llvm13EngineBuilder12selectTargetEPNS_6ModuleENS_9StringRefES3_RKNS_15SmallVectorImplISsEENS_5Reloc5ModelENS_9CodeModel5ModelEPSs+0x368)[0x7feb2eb9ec88]
/usr/lib/xorg/modules/dri/r600_dri.so(_ZN4llvm13EngineBuilder6createEv+0xad)[0x7feb2eb9245d]
/usr/lib/xorg/modules/dri/r600_dri.so(LLVMCreateJITCompilerForModule+0x9b)[0x7feb2eb9e0fb]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x413e52)[0x7feb2eb43e52]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x413f3b)[0x7feb2eb43f3b]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x393bc5)[0x7feb2eac3bc5]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x2afcfd)[0x7feb2e9dfcfd]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x2ae745)[0x7feb2e9de745]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x1fecfb)[0x7feb2e92ecfb]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x1ed155)[0x7feb2e91d155]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x1c26f5)[0x7feb2e8f26f5]
/usr/lib/xorg/modules/dri/r600_dri.so(+0x1c280d)[0x7feb2e8f280d]
/usr/lib/libGL.so.1(+0x44b53)[0x7feb3829fb53]
/usr/lib/libGL.so.1(+0x1e2fe)[0x7feb382792fe]
/usr/lib/libGL.so.1(glXCreateNewContext+0x2a)[0x7feb3827952a]
/usr/lib/libcogl.so.9(+0x63a8a)[0x7feb306a1a8a]
/usr/lib/libcogl.so.9(cogl_display_setup+0x23)[0x7feb3065f8a3]
/usr/lib/libcogl.so.9(cogl_renderer_check_onscreen_template+0x69)[0x7feb3065f129]
/usr/lib/libclutter-1.0.so.0(+0x2f6ce)[0x7feb30b016ce]
/usr/lib/libclutter-1.0.so.0(+0x5e279)[0x7feb30b30279]
/usr/lib/libclutter-1.0.so.0(+0x753b3)[0x7feb30b473b3]
/usr/lib/libclutter-1.0.so.0(+0x80d6a)[0x7feb30b52d6a]
/usr/lib/libclutter-1.0.so.0(+0x80f9b)[0x7feb30b52f9b]
/usr/lib/libglib-2.0.so.0(g_option_context_parse+0x3b7)[0x7feb4a0316e7]
/usr/lib/libclutter-1.0.so.0(clutter_init+0xd2)[0x7feb30b53262]
/usr/lib/libcheese-gtk.so.21(cheese_gtk_init+0x24)[0x7feb318cf5e4]
/usr/lib/control-center-1/panels/libuser-accounts.so(g_io_module_load+0x33)[0x7feb323542c3]
/usr/lib/libgio-2.0.so.0(+0x5ae06)[0x7feb4a57be06]
/usr/lib/libgobject-2.0.so.0(g_type_module_use+0x81)[0x7feb4a306271]
/usr/lib/libgio-2.0.so.0(g_io_modules_load_all_in_directory_with_scope+0x84)[0x7feb4a57c1e4]
gnome-control-center[0x40975a]
/usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x117)[0x7feb4a3032c7]
/usr/lib/libgobject-2.0.so.0(+0x15038)[0x7feb4a2e8038]
/usr/lib/libgobject-2.0.so.0(g_object_newv+0x781)[0x7feb4a2e9af1]
/usr/lib/libgobject-2.0.so.0(g_object_new+0xec)[0x7feb4a2ea13c]
gnome-control-center(main+0x72)[0x407b02]
/lib/libc.so.6(__libc_start_main+0xf5)[0x7feb49709455]
gnome-control-center[0x407bb1]
======= Memory map: ========
00400000-00412000 r-xp 00000000 08:04 3560853 /usr/bin/gnome-control-center
00611000-00612000 r--p 00011000 08:04 3560853 /usr/bin/gnome-control-center
00612000-00613000 rw-p 00012000 08:04 3560853 /usr/bin/gnome-control-center
017ea000-01d4d000 rw-p 00000000 00:00 0 [heap]
7feb2d5d3000-7feb2d5f4000 rw-p 00000000 00:00 0
7feb2d5f4000-7feb2d5f5000 ---p 00000000 00:00 0
7feb2d5f5000-7feb2df2f000 rw-p 00000000 00:00 0
7feb2df2f000-7feb2df30000 ---p 00000000 00:00 0
7feb2df30000-7feb2e730000 rw-p 00000000 00:00 0
7feb2e730000-7feb2f531000 r-xp 00000000 08:04 3804024 /usr/lib/xorg/modules/dri/r600_dri.so
7feb2f531000-7feb2f731000 ---p 00e01000 08:04 3804024 /usr/lib/xorg/modules/dri/r600_dri.so
7feb2f731000-7feb2f76a000 r--p 00e01000 08:04 3804024 /usr/lib/xorg/modules/dri/r600_dri.so
7feb2f76a000-7feb2f7b2000 rw-p 00e3a000 08:04 3804024 /usr/lib/xorg/modules/dri/r600_dri.so
7feb2f7b2000-7feb2f99a000 rw-p 00000000 00:00 0
7feb2f99a000-7feb2f99f000 r-xp 00000000 08:04 3556381 /usr/lib/libxcb-util.so.0.0.0
7feb2f99f000-7feb2fb9f000 ---p 00005000 08:04 3556381 /usr/lib/libxcb-util.so.0.0.0
7feb2fb9f000-7feb2fba0000 rw-p 00005000 08:04 3556381 /usr/lib/libxcb-util.so.0.0.0
7feb2fba0000-7feb2fba8000 r-xp 00000000 08:04 3558533 /usr/lib/libstartup-notification-1.so.0.0.0
7feb2fba8000-7feb2fda8000 ---p 00008000 08:04 3558533 /usr/lib/libstartup-notification-1.so.0.0.0
7feb2fda8000-7feb2fda9000 rw-p 00008000 08:04 3558533 /usr/lib/libstartup-notification-1.so.0.0.0
7feb2fda9000-7feb2fddc000 r-xp 00000000 08:04 3553550 /usr/lib/libgsttag-0.10.so.0.25.0
7feb2fddc000-7feb2ffdb000 ---p 00033000 08:04 3553550 /usr/lib/libgsttag-0.10.so.0.25.0
7feb2ffdb000-7feb2ffdd000 r--p 00032000 08:04 3553550 /usr/lib/libgsttag-0.10.so.0.25.0
7feb2ffdd000-7feb2ffde000 rw-p 00034000 08:04 3553550 /usr/lib/libgsttag-0.10.so.0.25.0
7feb2ffde000-7feb2ffe2000 r-xp 00000000 08:04 262257 /lib/libattr.so.1.1.0
7feb2ffe2000-7feb301e1000 ---p 00004000 08:04 262257 /lib/libattr.so.1.1.0
7feb301e1000-7feb301e2000 rw-p 00003000 08:04 262257 /lib/libattr.so.1.1.0
7feb301e2000-7feb301eb000 r-xp 00000000 08:04 3553408 /usr/lib/libgudev-1.0.so.0.1.1
7feb301eb000-7feb303ea000 ---p 00009000 08:04 3553408 /usr/lib/libgudev-1.0.so.0.1.1
7feb303ea000-7feb303eb000 r--p 00008000 08:04 3553408 /usr/lib/libgudev-1.0.so.0.1.1
7feb303eb000-7feb303ec000 rw-p 00009000 08:04 3553408 /usr/lib/libgudev-1.0.so.0.1.1
7feb303ec000-7feb3043a000 r-xp 00000000 08:04 3559387 /usr/lib/libgee.so.2.0.0
7feb3043a000-7feb3063a000 ---p 0004e000 08:04 3559387 /usr/lib/libgee.so.2.0.0
7feb3063a000-7feb3063d000 r--p 0004e000 08:04 3559387 /usr/lib/libgee.so.2.0.0
7feb3063d000-7feb3063e000 rw-p 00051000 08:04 3559387 /usr/lib/libgee.so.2.0.0
7feb3063e000-7feb306c4000 r-xp 00000000 08:04 3560205 /usr/lib/libcogl.so.9.1.1
7feb306c4000-7feb308c4000 ---p 00086000 08:04 3560205 /usr/lib/libcogl.so.9.1.1
7feb308c4000-7feb308c8000 r--p 00086000 08:04 3560205 /usr/lib/libcogl.so.9.1.1
7feb308c8000-7feb308ca000 rw-p 0008a000 08:04 3560205 /usr/lib/libcogl.so.9.1.1
7feb308ca000-7feb308d1000 r-xp 00000000 08:04 3560206 /usr/lib/libcogl-pango.so.0.0.0
7feb308d1000-7feb30ad0000 ---p 00007000 08:04 3560206 /usr/lib/libcogl-pango.so.0.0.0
7feb30ad0000-7feb30ad1000 r--p 00006000 08:04 3560206 /usr/lib/libcogl-pango.so.0.0.0
7feb30ad1000-7feb30ad2000 rw-p 00007000 08:04 3560206 /usr/lib/libcogl-pango.so.0.0.0
7feb30ad2000-7feb30bf2000 r-xp 00000000 08:04 3560253 /usr/lib/libclutter-1.0.so.0.1000.2
7feb30bf2000-7feb30df2000 ---p 00120000 08:04 3560253 /usr/lib/libclutter-1.0.so.0.1000.2
7feb30df2000-7feb30df6000 r--p 00120000 08:04 3560253 /usr/lib/libclutter-1.0.so.0.1000.2
7feb30df6000-7feb30df8000 rw-p 00124000 08:04 3560253 /usr/lib/libclutter-1.0.so.0.1000.2
7feb30df8000-7feb30dfa000 rw-p 00000000 00:00 0
7feb30dfa000-7feb30e05000 r-xp 00000000 08:04 3560325 /usr/lib/libclutter-gtk-1.0.so.0.0.0
7feb30e05000-7feb31004000 ---p 0000b000 08:04 3560325 /usr/lib/libclutter-gtk-1.0.so.0.0.0
7feb31004000-7feb31005000 r--p 0000a000 08:04 3560325 /usr/lib/libclutter-gtk-1.0.so.0.0.0
7feb31005000-7feb31006000 rw-p 0000b000 08:04 3560325 /usr/lib/libclutter-gtk-1.0.so.0.0.0
7feb31006000-7feb3109b000 r-xp 00000000 08:04 3562929 /usr/lib/libmx-1.0.so.2.401.0
7feb3109b000-7feb3129a000 ---p 00095000 08:04 3562929 /usr/lib/libmx-1.0.so.2.401.0
7feb3129a000-7feb3129b000 r--p 00094000 08:04 3562929 /usr/lib/libmx-1.0.so.2.401.0
7feb3129b000-7feb3129e000 rw-p 00095000 08:04 3562929 /usr/lib/libmx-1.0.so.2.401.0
7feb3129e000-7feb312b1000 r-xp 00000000 08:04 3560319 /usr/lib/libclutter-gst-1.0.so.0.504.0
7feb312b1000-7feb314b1000 ---p 00013000 08:04 3560319 /usr/lib/libclutter-gst-1.0.so.0.504.0
7feb314b1000-7feb314b2000 r--p 00013000 08:04 3560319 /usr/lib/libclutter-gst-1.0.so.0.504.0
7feb314b2000-7feb314b3000 rw-p 00014000 08:04 3560319 /usr/lib/libclutter-gst-1.0.so.0.504.0
7feb314b3000-7feb314b4000 rw-p 00000000 00:00 0
7feb314b4000-7feb314b8000 r-xp 00000000 08:04 262266 /lib/libcap.so.2.22
7feb314b8000-7feb316b7000 ---p 00004000 08:04 262266 /lib/libcap.so.2.22
7feb316b7000-7feb316b8000 rw-p 00003000 08:04 262266 /lib/libcap.so.2.22
7feb316b8000-7feb316c7000 r-xp 00000000 08:04 3562938 /usr/lib/libcheese.so.3.2.4
7feb316c7000-7feb318c6000 ---p 0000f000 08:04 3562938 /usr/lib/libcheese.so.3.2.4
7feb318c6000-7feb318c7000 r--p 0000e000 08:04 3562938 /usr/lib/libcheese.so.3.2.4
7feb318c7000-7feb318c8000 rw-p 0000f000 08:04 3562938 /usr/lib/libcheese.so.3.2.4
7feb318c8000-7feb318d4000 r-xp 00000000 08:04 3562939 /usr/lib/libcheese-gtk.so.21.1.4
7feb318d4000-7feb31ad3000 ---p 0000c000 08:04 3562939 /usr/lib/libcheese-gtk.so.21.1.4
7feb31ad3000-7feb31ad4000 r--p 0000b000 08:04 3562939 /usr/lib/libcheese-gtk.so.21.1.4
7feb31ad4000-7feb31ad5000 rw-p 0000c000 08:04 3562939 /usr/lib/libcheese-gtk.so.21.1.4
7feb31ad5000-7feb31add000 r-xp 00000000 08:04 262365 /lib/libcrypt-2.15.so
7feb31add000-7feb31cdc000 ---p 00008000 08:04 262365 /lib/libcrypt-2.15.so
7feb31cdc000-7feb31cdd000 r--p 00007000 08:04 262365 /lib/libcrypt-2.15.so
7feb31cdd000-7feb31cde000 rw-p 00008000 08:04 262365 /lib/libcrypt-2.15.so
7feb31cde000-7feb31d0c000 rw-p 00000000 00:00 0
7feb31d0c000-7feb31d0e000 r-xp 00000000 08:04 3559890 /usr/lib/libsystemd-daemon.so.0.0.1
7feb31d0e000-7feb31f0e000 ---p 00002000 08:04 3559890 /usr/lib/libsystemd-daemon.so.0.0.1
7feb31f0e000-7feb31f0f000 r--p 00002000 08:04 3559890 /usr/lib/libsystemd-daemon.so.0.0.1
7feb31f0f000-7feb31f10000 rw-p 00003000 08:04 3559890 /usr/lib/libsystemd-daemon.so.0.0.1
7feb31f10000-7feb31f19000 r-xp 00000000 08:04 3559892 /usr/lib/libsystemd-login.so.0.2.1
7feb31f19000-7feb32119000 ---p 00009000 08:04 3559892 /usr/lib/libsystemd-login.so.0.2.1
7feb32119000-7feb3211a000 r--p 00009000 08:04 3559892 /usr/lib/libsystemd-login.so.0.2.1
7feb3211a000-7feb3211b000 rw-p 0000a000 08:04 3559892 /usr/lib/libsystemd-login.so.0.2.1
7feb3211b000-7feb32135000 r-xp 00000000 08:04 3559785 /usr/lib/libpolkit-gobject-1.so.0.0.0
7feb32135000-7feb32334000 ---p 0001a000 08:04 3559785 /usr/lib/libpolkit-gobject-1.so.0.0.0
7feb32334000-7feb32335000 r--p 00019000 08:04 3559785 /usr/lib/libpolkit-gobject-1.so.0.0.0
7feb32335000-7feb32336000 rw-p 0001a000 08:04 3559785 /usr/lib/libpolkit-gobject-1.so.0.0.0
7feb32336000-7feb3235f000 r-xp 00000000 08:04 4458292 /usr/lib/control-center-1/panels/libuser-accounts.so
7feb3235f000-7feb3255f000 ---p 00029000 08:04 4458292 /usr/lib/control-center-1/panels/libuser-accounts.so
7feb3255f000-7feb32560000 r--p 00029000 08:04 4458292 /usr/lib/control-center-1/panels/libuser-accounts.so
7feb32560000-7feb32562000 rw-p 0002a000 08:04 4458292 /usr/lib/control-center-1/panels/libuser-accounts.so
7feb32562000-7feb3256f000 r-xp 00000000 08:04 3555874 /usr/lib/libsocialweb-client.so.2.0.0
7feb3256f000-7feb3276e000 ---p 0000d000 08:04 3555874 /usr/lib/libsocialweb-client.so.2.0.0
7feb3276e000-7feb3276f000 r--p 0000c000 08:04 3555874 /usr/lib/libsocialweb-client.so.2.0.0
7feb3276f000-7feb32770000 rw-p 0000d000 08:04 3555874 /usr/lib/libsocialweb-client.so.2.0.0
7feb32770000-7feb32797000 r-xp 00000000 08:04 3563162 /usr/lib/libgnome-desktop-3.so.2.1.3
7feb32797000-7feb32996000 ---p 00027000 08:04 3563162 /usr/lib/libgnome-desktop-3.so.2.1.3
7feb32996000-7feb32997000 r--p 00026000 08:04 3563162 /usr/lib/libgnome-desktop-3.so.2.1.3
7feb32997000-7feb32998000 rw-p 00027000 08:04 3563162 /usr/lib/libgnome-desktop-3.so.2.1.3
7feb32998000-7feb329ab000 r-xp 00000000 08:04 4458280 /usr/lib/control-center-1/panels/libbackground.so
7feb329ab000-7feb32bab000 ---p 00013000 08:04 4458280 /usr/lib/control-center-1/panels/libbackground.so
7feb32bab000-7feb32bac000 r--p 00013000 08:04 4458280 /usr/lib/control-center-1/panels/libbackground.so
7feb32bac000-7feb32bad000 rw-p 00014000 08:04 4458280 /usr/lib/control-center-1/panels/libbackground.so
7feb32bad000-7feb32bb1000 r-xp 00000000 08:04 4458281 /usr/lib/control-center-1/panels/libscreen.so
7feb32bb1000-7feb32db0000 ---p 00004000 08:04 4458281 /usr/lib/control-center-1/panels/libscreen.so
7feb32db0000-7feb32db1000 r--p 00003000 08:04 4458281 /usr/lib/control-center-1/panels/libscreen.so
7feb32db1000-7feb32db2000 rw-p 00004000 08:04 4458281 /usr/lib/control-center-1/panels/libscreen.so
7feb32db2000-7feb32dc7000 r-xp 00000000 08:04 262341 /lib/libnsl-2.15.so
7feb32dc7000-7feb32fc6000 ---p 00015000 08:04 262341 /lib/libnsl-2.15.so
7feb32fc6000-7feb32fc7000 r--p 00014000 08:04 262341 /lib/libnsl-2.15.so
7feb32fc7000-7feb32fc8000 rw-p 00015000 08:04 262341 /lib/libnsl-2.15.so
7feb32fc8000-7feb32fca000 rw-p 00000000 00:00 0
7feb32fca000-7feb3327d000 r-xp 00000000 08:04 3556523 /usr/lib/libvorbisenc.so.2.0.9
7feb3327d000-7feb3347c000 ---p 002b3000 08:04 3556523 /usr/lib/libvorbisenc.so.2.0.9
7feb3347c000-7feb33498000 r--p 002b2000 08:04 3556523 /usr/lib/libvorbisenc.so.2.0.9
7feb33498000-7feb33499000 rw-p 002ce000 08:04 3556523 /usr/lib/libvorbisenc.so.2.0.9
7feb33499000-7feb334e3000 r-xp 00000000 08:04 3556504 /usr/lib/libFLAC.so.8.2.0
7feb334e3000-7feb336e2000 ---p 0004a000 08:04 3556504 /usr/lib/libFLAC.so.8.2.0
7feb336e2000-7feb336e4000 rw-p 00049000 08:04 3556504 /usr/lib/libFLAC.so.8.2.0
7feb336e4000-7feb336e9000 r-xp 00000000 08:04 3556392 /usr/lib/libasyncns.so.0.3.1Abgebrochen
What is broken and how do I fix it?So, I fixed the audio issue with removing all unrequired packages.
But additional the workspace shifting is now unstable but sound works!
Now only the gnome-controll-center needs a fix
EDIT:
Sound still not working:
I can't adjust the volume.
Last edited by archer42 (2012-04-28 05:47:41) -
Control center doesn't work all the time in iOS 8
I have the new iPhone 6+ and have noticed that sometimes I can't pull up control center.
I have to unlock it, then lock it again and then it will pull up. I use this method to access the torch at night.
Also to switch off the torch when the phone is locked, the camera icon could be tapped. However this feature doesn't work anymore.
Now I have to click the home button > swipe up the control center (hopefully it works) > tap the torch icon.
It used to be easier when you could just click the home button > tap the camera icon.
Please fix these issues soon.You are not addressing Apple here, we are users like you, so we cannot fix these issues. If you would like to tell Apple what your problem is, then you can leave them feedback HERE. Click on the appropriate link.
However, if you want to try and troubleshoot your Control Center issue, then I would go into Settings>Control Center>Access on Lock Screen and if that is on, turn it off and back on again. Also, when accessing Control Center from the lock screen, make sure you are starting off of the screen when you begin to swipe upwards. That tends to work better. Sometimes starting on the screen, the finger does not get low enough for it to register.
As far as the flashlight button, I never attempted to turn it off with the camera, I just tapped in Control Center. -
Windows 8.1-AMD Catalyst Control Center
Hello!
First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
"Catalyst Control Center cannot be started.
There are currently no settings that can be configured using Catalyst Control Center"
This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs.
So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again so I can change what graphics card is used when.
Thank you
-Conor
P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.Possible solution:
Hi Guys,
I just contacted HP support regarding this problem. They asked me to install the following file:
ccc2_install.exe
It was already present in my system in the following path:
"C:\Program Files\AMD\CCC2\Install"
This solved my problem. CCC is working fine now
Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
Hope this helps
Cheers...
Thanks and regards,
Saptarishi -
Launching a Preview Session Outside the ATG Business Control Center
I have setup a remote preview server on ATG 10.1.1. Everything works great when viewing it inside the BCC however I’m wondering how to access the preview server outside the BCC. According to the ATG documentation, it sounds like that’s possible. The ATG docs state:
“Users can preview project asset changes outside the framework of the Business Control Center. For example, you might want employees or outside reviewers who do not have access to the Business Control Center to evaluate changes to a Web application while it undergoes development. In this case, you can enable preview on servers that do not have the Business Control Center installed, then give reviewers URLs to the launch pages on these servers. They can invoke these URLs from any browser window.
Note: Users who are not logged into the Business Control Center can invoke preview sessions only with URLs to a server where the Business Control Center is not running. In order to avoid security breaches, URLs to preview sessions on the Business Control Center server are blocked.”
This is the only information I found in the documentation that talks about viewing preview outside the BCC. Based on this limited information, there are a lot of questions I have about how this actually works.
1. Any attempt to hit any page on my remote preview server outside the BCC, I see the following exception:
“ERROR [PreviewProfileRequestProcessor] An attempt was made to preview a project without logging in as a user with access to publishing assets. If you are running a local preview instance, the preview URLs registered with the PreviewURLManager may be misconfigured. Ensure that the preview URLs are configured with the same host and domain name used to access the BCC server. This preview request URL is: http://localhost:8280/sample_catalog/index.jsp. If you are running a remote preview instance, the Preview feature does not support remote preview on servers running the BCC. Ensure that the remote preview instance is not running any of the BCC related modules. If you received this error and did not try to perform a remote preview, then you may need to disable preview in the current web application by setting the atg.preview context parameter to false in the webapps web.xml file.”
I am not running the BCC on this instance so I’m not sure why I am seeing this. Is there something configuration I'm missing here?
2. I don’t understand where these urls would come from that a reviewer would use to preview the application. There is no "remote preview url" when previewing a page from within the BCC to copy and send to a reviewer so how would a BCC user send a url to a reviewer?
3. Assuming the reviewing knew which page to hit in the remote preview server, how would that page use the assets from a project? Should the project id of the project be include as a param to the url?
- MichaelShaik, if only it was that simple :( Do you have much experience working with remote preview or are you just guessing here like I have been? In order to help clarify my post though, here is the scenario that describes the basis for my questions:
A business user is working on a project within Merchandising of the BCC
1. The user makes a change to a category
2. The user clicks the Preview Button on the tool bar
3. The system displays the Preview launcher screen
4. The user selects a pre-configured profile user and page for the preview session
5. The user clicks the Flexed based launch button
6. The application displays within the context of the BCC browser/tab
7. The business user would like to send that url to a reviewer who does not have access to login to the BCC
What happens from step 6 is that a giant iframe launches from within the context of the BCC browser/tab. If you are using remote preview, it is still an iframe and still displays within the context of the BCC browser/tab, the only difference is that the BCC is proxying information to the preview instance in order to initialize the preview session to display the application in the context of the business user’s project. The url the user sees in the browser is the url for the BCC, not the remote preview server. Because the UI for Merchandising and Preview is built using Flex, there is no way to click on the Preview button to open it up in another tab or browser. The only way your suggestion would work is if there is a way to configure the Flex UI to have it open up preview in a new browser/tab which I doubt is possible.
I hope this helps better explain my post. With that said though, this brings me back to my original questions. -
In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
Cheers, Tom -
message comes up: catalyst control center host application has stopped working. Videos sound but no picture?
Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
- Peter -
Gnome-control-center - User deleting not working,
Hi all,
Using gnome shell, I am trying to delete a user I created for test using the same gnome-control-center; but trying to delete it now but when I press the delete key gnome-control-center crash with the option to delete files - and if I choose to keep the file an error come up: "Failed to delete user - Method "DeleteUser" with signature "x" on interface "org.freedesktop.Accounts" doesn't exist"
See terminal output below:
[sweetth@myhost ~]$ gnome-control-center
libnm-glib.so.4: cannot open shared object file: No such file or directory
Failed to load module: /usr/lib/control-center-1/panels/libnetwork.so
(gnome-control-center:9733): GLib-GObject-WARNING **: gtype.c:4201: type id `1' is invalid
(gnome-control-center:9733): GLib-GObject-WARNING **: can't peek value table for type `<unknown>' which is not currently referenced
(gnome-control-center:9733): GLib-GObject-WARNING **: gvalue.c:191: cannot initialize GValue with type `(null)', this type has no GTypeValueTable implementation
(gnome-control-center:9733): GLib-GObject-WARNING **: gtype.c:4201: type id `0' is invalid
(gnome-control-center:9733): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
Segmentation faultI didn't recompile it because frankly I do not know where to get the pkgbuild...
See output with 'bt full'
[sweetth@myhost ~]$ gdb /usr/bin/gnome-control-center
GNU gdb (GDB) 7.2
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/gnome-control-center...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/gnome-control-center
[Thread debugging using libthread_db enabled]
[New Thread 0xb265bb70 (LWP 4926)]
[New Thread 0xb1cffb70 (LWP 4928)]
(gnome-control-center:4923): GLib-GObject-WARNING **: gtype.c:4201: type id `1' is invalid
(gnome-control-center:4923): GLib-GObject-WARNING **: can't peek value table for type `<unknown>' which is not currently referenced
(gnome-control-center:4923): GLib-GObject-WARNING **: gvalue.c:191: cannot initialize GValue with type `(null)', this type has no GTypeValueTable implementation
(gnome-control-center:4923): GLib-GObject-WARNING **: gtype.c:4201: type id `0' is invalid
(gnome-control-center:4923): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
Program received signal SIGSEGV, Segmentation fault.
0xb30bbe1c in dbus_g_proxy_begin_call () from /usr/lib/libdbus-glib-1.so.2
(gdb) bt full
#0 0xb30bbe1c in dbus_g_proxy_begin_call () from /usr/lib/libdbus-glib-1.so.2
No symbol table info available.
#1 0xb2dbdcf8 in ?? ()
from /usr/lib/control-center-1/panels/libuser-accounts.so
No symbol table info available.
#2 0xb2dcf600 in ?? ()
from /usr/lib/control-center-1/panels/libuser-accounts.so
No symbol table info available.
#3 0xb788ee23 in g_cclosure_marshal_VOID(int0_t) ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#4 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#5 0xb78851a0 in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#6 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#8 0xb7c449e2 in gtk_dialog_response () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#9 0xb7c44db6 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
---Type <return> to continue, or q <return> to quit---
#10 0xb788eb2c in g_cclosure_marshal_VOID__VOID ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#11 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#12 0xb78851a0 in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#13 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#14 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#15 0xb7bfe14a in gtk_button_clicked () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#16 0xb7bff4b8 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#17 0xb788eb2c in g_cclosure_marshal_VOID__VOID ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#18 0xb787177d in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#19 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#20 0xb7884915 in ?? () from /usr/lib/libgobject-2.0.so.0
---Type <return> to continue, or q <return> to quit---
No symbol table info available.
#21 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#22 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#23 0xb7bfe06a in gtk_button_released () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#24 0xb7bfe0b4 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#25 0xb7ccda62 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#26 0xb787177d in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#27 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#28 0xb7884fbf in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#29 0xb788df69 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#30 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#31 0xb7e106f3 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
---Type <return> to continue, or q <return> to quit---
#32 0xb7ccd252 in gtk_propagate_event () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#33 0xb7ccd628 in gtk_main_do_event () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#34 0xb7b235fc in ?? () from /usr/lib/libgdk-3.so.0
No symbol table info available.
#35 0xb7b4a898 in ?? () from /usr/lib/libgdk-3.so.0
No symbol table info available.
#36 0xb77b4eff in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#37 0xb77b5660 in ?? () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#38 0xb77b5d9b in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#39 0xb7ccc945 in gtk_main () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#40 0xb7be8b44 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#41 0xb79432bc in g_application_run () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#42 0x0804c62f in main ()
No symbol table info available.
(gdb) quit
A debugging session is active.
Inferior 1 [process 4923] will be killed.
Quit anyway? (y or n) y -
(OWB 10g R2) Control Center Manager won't start
Hi,
I'm in the middle of upgrading from OWB10g Release 1 to OWB10g Release 2 on a testbox.
I have completed the steps to upgrade the runtime metadata (I did the Move, then I upgraded the locations and then I ran the tcl script in OMBPlus).
Now, I have gone to the DEFAULT_CONFIGURATION for my project and I updated the default control center for my project.
Follow me so far?
Okay, here's the problem.... when I try to start the "Control Center Manager" from the Design Center's Tool menu.... I see nothing but a grey window with a titlebar and nothing else.
This happens regardless of whether I try to launch the Control Center Manager from a windows client or the linux server.
On the linux server I see this output after I enter the username and password to connect to the Control Center Manager:
java.lang.RuntimeException: Cannot find handler method handleView
at oracle.wh.ui.editor.listener.ReflectListener.findMethod(ReflectListener.java:80)
at oracle.wh.ui.editor.listener.ReflectListener.<init>(ReflectListener.java:28)
at oracle.wh.ui.editor.listener.ReflectPopupMenuListener.<init>(ReflectPopupMenuListener.java:63)
at oracle.wh.ui.editor.menu.MenuUtils.addEventHandler(MenuUtils.java:83)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.initMenuItem(MenuDefinitionImpl.java:167)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.constructMenu(MenuDefinitionImpl.java:197)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.createMenuBar(MenuDefinitionImpl.java:144)
at oracle.wh.ui.editor.Editor.init(Editor.java:1045)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1421)
at oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor.<init>(DeploymentManagerEditor.java:127)
at oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor.<init>(DeploymentManagerEditor.java:110)
at oracle.wh.ui.runtime.RuntimeController.startDeployManager(RuntimeController.java:270)
at oracle.wh.ui.runtime.RuntimeController.actionPerformed(RuntimeController.java:200)
at oracle.wh.service.sdk.OWBConsumer.dataItemAvailable(OWBInfoBus.java:381)
at javax.infobus.DefaultController.fireItemAvailable(DefaultController.java:90)
at javax.infobus.InfoBus.fireItemAvailable(InfoBus.java:989)
at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:160)
at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:76)
at oracle.wh.ui.console.commands.TreeMenuHandler.notify(TreeMenuHandler.java:94)
at oracle.wh.ui.console.commands.DeploymentMgrCmd.performAction(DeploymentMgrCmd.java:26)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
------------ could not find : oracle/wh/ui/common/media/T_projectObj.gif
Class of this owner is : oracle.wh.repos.impl.application.CMPWBDataWarehouse
Class of this owner is : oracle.wh.repos.impl.application.CMPWBDataWarehouse
Class of this owner is : oracle.wh.repos.impl.processFlow.CMPProcessInstalledModule
====== ZDockingManager : DOCK : todock: DeploymentManagerTabsTag: station: ROOT : constraint : East
===add component name: ROOT : size: java.awt.Dimension[width=200,height=300]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
ZDockingManager:==== before showpanel
====== ZDockingManager : DOCK : todock: DeploymentManagerMonitorTag: station: DeploymentManagerTabsTag : constraint : South
===remove component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: null : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerMonitorTag : size: java.awt.Dimension[width=200,height=116]
ZDockingManager:==== before showpanel
====== ZDockingManager : DOCK : todock: DeploymentManagerButtonToolBarTag: station: MenuBarPanel : constraint : South
===add component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
===add component name: null : size: java.awt.Dimension[width=191,height=30]
ZDockingManager:===== before undock:
ZDockingManager:==== undock panel : DeploymentManagerButtonToolBarTag
ZDockingManager:==== undock panel 2 : DeploymentManagerButtonToolBarTag
0 : V1
===remove component name: null : size: java.awt.Dimension[width=191,height=30]
===remove component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
ZDockingManager:===== after undock:
====== ZDockingManager : DOCK : todock: DeploymentManagerButtonToolBarTag: station: MenuBarPanel : constraint : South
===add component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
===add component name: null : size: java.awt.Dimension[width=191,height=30]
Layout Not Found: DeployMgrLayout.xml
setVisible called for editor: Control Center: MM_RUNTIME_REP, value = true
Posting GUI_STARTING on oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor[frame2,0,0,1024x768,invalid,hidden,layout=java.awt.BorderLayout,title=Control Center: MM_RUNTIME_REP,resizable,normal,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=javax.swing.JRootPane[,0,0,0x0,invalid,layout=javax.swing.JRootPane$RootLayout,alignmentX=null,alignmentY=null,border=,flags=385,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addBType: ERROR already added key= Table value= CMPProfileTable
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addAType: ERROR already added key= CMPAdvancedQueue value= AdvancedQueue
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addBType: ERROR already added key= AdvancedQueue value= CMPAdvancedQueue
Has this happened to anyone else?Hi, thanks for responding...
When I run show_service.sql it says the Control Center Service is Available. (See below).
==================================
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @./show_service.sql
Available
PL/SQL procedure successfully completed.
SQL>
===================================
And when I do a ps command on linux I see the process running.
oracle 23349 1 0 12:03 ? 00:00:00 /bin/sh /u01/app/oracle/product/10.2.0/owb/owb/bin/unix/run_service.sh -automatic 1 /u01/app/o
oracle 23351 23349 0 12:03 ? 00:00:02 ../../../jdk/jre/bin/java -Xmx768M -Djava.awt.headless=true -DORACLE_HOME=/u01/app/oracle/prod
Do you suggest I run the service_doctor.sql even though the service looks like it is available?
Thanks. -
I am building a site and i have one section for lights with
on and off buttons that works fine. I have a sound section with on
and off buttons that work fine. The problem I have is if the sound
is off and I hit say the navigation home button then my sound
starts up again. Its the only nav button i have coded so far but i
believe if i finished it the others would do the same thing. I have
tried every tutorial i can find and the code is either wrong, or i
get the funny button problems were other buttons cause the sound to
restart. All i want is the site to load with the music playing, but
if the user turns it off, it should stay off regardless of the
scene they go to unless they decide to turn it back on. So what am
i missiong here, why won't only the sound buttons control the
sound. I tried loading the sound and unloading it, including it on
a time line, and in a button, but everything has the same problem,
other buttons such as the nav turn the sound back on. i am
uploading my flash file hopefully someone can suggest something i
am missing and suggest something better.
my file is at www.designbytreitner.com/main2.flaLike I said, I’ve tried several tutorials and methods
and they all wind up with the same bad side effect. Of course all
methods use scripting, how else would you get anything to work.
What do you mean post my code here that would be fine if the
problem could only be my sound buttons. However it could be
something else as well, that’s why I gave a link to my flash
file instead. Also I mentioned trying several different methods
which all had the same problem with other buttons re-starting my
sound. That tells me the problem is something other than the code
on my sound buttons. -
Disable control center if using Find my iPhone
If you misplace your iPhone and you go to use find my iPhone , it can send a tone as you know, but the problem is if someone has your phone they can use the !Control Center to put your phone in Airplane Mode'. We had someone that worked in a restaurant found the phone and then put it in airplane mode so it would no longer make a sound. The only way we got it back was because we showed the manager the map that show it was still there. So he ask each person to check, and one person said that they was going to turn it in, but forgot. But why did she out it in air plan mode.
So we no longer have it so you can slid up and use the control center if the phone is lock.No.
-
Hi all,
how can I schedule control center service to startup every time server is rebooted?
I've notice that server sometimes reboot due to upgrades and that control center service doesn't startup and so my scheduled job doesn't start.
I'm using oracle 11g and win server 2003.
Many thanks.I use win server 2003 and the user has permission to open file.
In the log I notice this java exception:
2008/11/13-03:05:51-CET [D6A05E][] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- Closed Connection
at oracle.wh.runtime.platform.service.controller.PlatformDb.disconnect(PlatformDb.java:108)
at oracle.wh.runtime.platform.service.Service.run(Service.java:427)
at oracle.wh.runtime.platform.service.Service.main(Service.java:1082)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at Launcher.main(Launcher.java:167)
Caused by: java.sql.SQLException: Closed Connection
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:439)
at oracle.jdbc.driver.PhysicalConnection.commit(PhysicalConnection.java:3323)
at oracle.jdbc.driver.PhysicalConnection.commit(PhysicalConnection.java:3357)
at oracle.wh.runtime.platform.service.controller.PlatformDb.disconnect(PlatformDb.java:102)
... 7 more
java.sql.SQLException: Closed Connection
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:439)
at oracle.jdbc.driver.PhysicalConnection.commit(PhysicalConnection.java:3323)
at oracle.jdbc.driver.PhysicalConnection.commit(PhysicalConnection.java:3357)
at oracle.wh.runtime.platform.service.controller.PlatformDb.disconnect(PlatformDb.java:102)
at oracle.wh.runtime.platform.service.Service.run(Service.java:427)
at oracle.wh.runtime.platform.service.Service.main(Service.java:1082)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at Launcher.main(Launcher.java:167)
2008/11/13-03:05:51-CET [D6A05E][] The Control Center Service is shutting down due to a previously reported fatal error.
This error can happens because I've 2 instance with owb on same server? The other instance started without problems.
Thanks -
Does install of iCloud Control Center add another Outlook.pst?
Outlook 2010 on Windows 7.
After I installed the iCloud Control Center it appears there is another
Outlook.pst file. This one is in 'My Documents'.
Is this part of iCloud?
Thanks!I have the same setup as sceloglaux (Win 7 64 bit Home, iPhone 3GS, Outlook 2010).
I tried a reboot, uninstall, reboot again, disable and close anything I can, then reinstall. Still the same problem.
Athough I'm not sure if I got this message before:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
Clicking the report button brings up my profile dialog box, then I choose my profile and it just goes back to the error dialog. Try again does the same thing.
sceloglaux - it sounds like you got it working. Care to enlighten us on what steps you took?
Do I need to have an me.com e-mail account set up first? I don't want to sync e-mail, just calendar and contacts. I tried setting up e-mail in case that's the missing link, but I'm having trouble with that as well (separate thread, probably server issues).
Thanks. -
11gr2 Control Center Service run_service.sh Issues
So after a few days of searching this forum (and many other online forums), I was unable to find anything related to this specific topic at all. Since I beat my head against a wall for a few days to figure this out, I figured if I can save even one other poor soul from hitting this issue then this post would be worth it.
In short, we have a two tier'd setup for OWB 11gR2 that we're building out as part of a data center migration project. Our intent was to run the control center service on an application server (completely apart from the database server which according to Oracle support, isn't normal - and initially, they told us wasn't supported... until I forwarded them a copy of the install & admin guide and they realized it was a valid architecture in that document on page 1-5... what the bag??). We installed the OWB standalone client (important to note, on a Red Hat Linux 64 bit box) exactly as per the instructions.
So onto the actual problem. When we tried to launch the control center service, it would start with the following output:
2013/05/22-10:58:53-CDT [558385E3][] Platform Service for null
2013/05/22-10:58:54-CDT [558385E3][] Connection Manager - OCI fix performed
2013/05/22-10:59:09-CDT [558385E3][] Thin driver connection time - 14604 millisecond(s)
2013/05/22-10:59:09-CDT [558385E3][] Connection Manager - property user.timezone value is US/Central
2013/05/22-10:59:09-CDT [558385E3][] Connection Manager - connection.timezone not set. Defaulting to value SERVICE
2013/05/22-10:59:09-CDT [558385E3][] Connection Manager - using service timezone US/Central
2013/05/22-10:59:09-CDT [558385E3][] Connection Manager - defaultimg session timezone offset to -05:00
2013/05/22-10:59:09-CDT [558385E3][] java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.createNewFile(File.java:883)
at oracle.wh.runtime.platform.service.util.TraceManager.createNewFile(TraceManager.java:579)
at oracle.wh.runtime.platform.service.util.TraceManager.switchTraceFiles(TraceManager.java:735)
at oracle.wh.runtime.platform.service.util.TraceManager.switchTraceFiles(TraceManager.java:702)
at oracle.wh.runtime.platform.service.util.TraceManager.initialize(TraceManager.java:308)
at oracle.wh.runtime.platform.service.ServiceObject.initializeTrace(ServiceObject.java:30)
at oracle.wh.runtime.platform.service.Service.<init>(Service.java:137)
at oracle.wh.runtime.platform.service.Service.main(Service.java:975)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Launcher.main(Launcher.java:175)
2013/05/22-10:59:09-CDT [558385E3][] Free Memory(bytes)=218257400 Total Memory(bytes)=248578048 Used Memory(bytes)=30320648 Used Memory(percent)=13%
2013/05/22-10:59:09-CDT [558385E3][] Control Center Service Version 11.2.0.3.0 starting
2013/05/22-10:59:09-CDT [558385E3][] Startup due to manual request
2013/05/22-10:59:09-CDT [558385E3][] Control Center Repository Name OWBSYS on Service w409d at Host wdprd00a0043
2013/05/22-10:59:09-CDT [558385E3][] Explicit garbage collection - every 1 execution(s)
2013/05/22-10:59:09-CDT [558385E3][] Initializing Platform
2013/05/22-10:59:09-CDT [558385E3][] Recovery starting
2013/05/22-10:59:09-CDT [558385E3][] Service startup complete
This is the entry from Ref. Doc ID 402401.1 - How To Setup a Remote Control Center Service or Remote Runtime With OWB 10.2, and this is exactly how we called the process:
cd <owb_home>/bin/unix
nohup echo <unified_repos_password> | run_service.sh -manual 1 control_center_service_home unified_repository servername listenerport servicename &control_center_service_home --Oracle Home where OWB software is installed
unified_repository --Schema name of the Unified Repository (owbsys)
servername --Server where Unified Repository is installed
listenerport --Listener port for the DB
servicename --Service name of the DB
This allows the service to run in the background, even if you log off of the terminal (which is ideal vs. using the local_service_login.sh script and xwindows to start it manually on a unix platform).
At first, this error smacked of the control center service using the wrong oracle home. It was spitting that error above out to STDOUT, instead of to a file in the owb/log file directory as it should. To see what would happen, I updated the wb_rt_service_nodes table to use the application server home value instead of the server side home... and it actually "worked". Starting it back up made it look almost right, except any sqlldr maps were being deployed with a warning... so I knew that wasn't it.
After much research and playing around, and a moment of sheer, blind luck (I created myself a unix alias to issue the run_service command, and accidentally added an additional dash in front of the node id parameter i.e. "-1"), the warning dissappeared and we also were able to deploy a sqlldr map without a warning as well (the other symptom of this was that any sqlldr map would deploy with a warning saying it couldn't find/create the .ctl file... but it was looking in the OWB home on the DB server, not the application server!!).
To summarize, it would appear that in order to startup a standalone 11gr2 control center service on the Linux 64 bit distribution of the code correctly - you must add the extra dash in the nodeid parameter like so:
<nohup stuff>run_service.sh -manual -1 <everything else>
If you don't do this, the control center service won't run properly and all the symptoms look like it's runing with the wrong oracle home... which, given the apparent lack of documentation from Oracle on the subject of running remote control centers, you may go crazy with the reset_owbcc_home.sql and remote_owb_install.sql scripts. Hope that helps someone.Forget to mention that i did execute the service_doctor.sql and the result is the following
All PL/SQL packages and functions are valid
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is available
There is a problem accessing the service startup script from the databaseserver
Here is the detailed error message which contains the name of the startscript file:-
Service startup file '/app/oracle/owb/bin/unix/run_service.sh' is notaccessible from the database server on instance number 1
Please verify that the disk containing the file is visible to thedatabase server
Please verify that the database server account has access rights on thefile
Connection information stored within the repository is correct
BR -
Is there some alternative method of opening control center? Some users with certain types of cases are unable to open control center with the swipe up from the bottom. Why didn't testing discover this, and offer an alternative. Even Siri won't open it. Come on, guys, this is basic.
Brooklyn Lion wrote:
Yes, I have the exact same problem with Control Center - I have to swipe countless number of times to get it to open. I tied two-finger swipes, certer swipe, corner swipe - you name it; nothing worked. I have iPhone 4S and I have no idea whether it is just phone issue or a major screw-up with the system.
Cases that come close to the bottom of the screen render opening the control center nearly impossible. I told my wife not to get a case like that, but she thought it would protect the phone better... What good is a protected phone if you can't USE it? Just lock it in a box, and it will be safe....
Maybe you are looking for
-
The Apple ID that appears in my iCloud account is different from the one I use every time I' m requested by Apple. I forgot the password for the iCloud id. I need to know how to change the iCloud id and make them both the same.
-
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255
Hello All We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly. Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps reboot
-
Ssh forwarded glx problem with older servers
Hi, I've recently started having problems with displaying OpenGL apps forwarded through an ssh session to an SGI Altix. It seems like it might be an upgrade problem that has also been observed on Ubuntu: https://bugs.launchpad.net/ubuntu/+sour - bug/
-
Iphoto library seems to slow down my new MacPro.
so far no one at at the Apple store can have a solution why the new MacPro is RATHER slow. some did suggest that the iphoto library MAY BE too big... also, when I work with it ..( it contains over `12000 items) ..it machine works hard and slow. who
-
Reg:Message not found. Application: FND, Message Name: CHILD_NOT_FOUND
Dear team, We are persoanlizing iSupplier Portal . CM file extract tab Our requirement is to add 2 new search conditions to existing search Criteria. PO Need By Date and PO creation Date are the 2 new search conditons. datatype is date Already PO Nee