KE27 - different type of currency?

hello,
Can I change the type of currency in the transaction KE27? Normally i use the type M - average rate of currecy in each day, but I want to use the stable rate (one per year). can I change it? if so, please tell me where.
thank you in advance

Did you set 'M' before?

Similar Messages

  • Usage of different types of currency units

    Hi All,
    Can any body let me know the scenarios to use different types of currencies i.e.  0doc_curry(document currency), 0currency e.t.c ?
    Thanks and Regards,
    Prashant

    Hi
    Check the below link.
    http://www.sap-img.com/financial/explain-the-difference-in-currency.htm
    Hope this helps
    Regards
    Shilpa

  • Confused about different types of currency

    Hello Gurus,
             what is second local currency and third local currency ? How many types of currency are used in the reporting ?
    can you give a ellaborated explain about those different types of currency .
    Many thanks,
    Frank

    Hi,
    In Financial Accounting, you can define up to two parallel currencies in addition to the local currency. Your ledgers are thereby managed in these parallel currencies in addition to the local currency.
    You can use various different currency types as parallel currencies.  You define the currency for a currency type when you define the organizational units.
    Group Currency: You define the group currency when you define your client.
    Company Currency: You define the company currency when you define the company that is assigned to your company code.
    Hard Currency: You define the hard currency when you define the country that your company code is assigned to.
    Index-Based Currency: You define the index currency when you define the country that your company code is assigned to.
    You can use a maximum of two parallel currencies (second and third local currencies).
    Refer to below link for further reading:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/e5/078d0b4acd11d182b90000e829fbfe/frameset.htm
    Hope this helps.

  • How to get different sum value by different types of record in sql server

    Hi,I have my query result like below
    AppID       LabType      DiaType      LabPrice    DiaPrice
      1                
    a               
    b               100          1000
      1                 a               
    cc              100          1000
      1                
    aa              b               100          1000
      1                 aa              cc             
    100          1000
      1                
    aaa            b               100          1000
      1                 aaa            cc              100         
    1000
    from this query
    select
    app.AppointmentId,
    lr.LabPrice,
    lt.LabCategoryType,
    drt.DiagnosisReportType,
        dr.DiaPrice as diaprice,
         from Appointment app
        left join DiagnosisReport dr on app.AppointmentId=dr.AppointmentId
        left join DiagnosisReportType drt on dr.DiagnosisReportTypeId=drt.DiagnosisReportTypeId
        left join LabCategoryReport lr on lr.AppointmentId=app.AppointmentId
        left join LabCategoryType lt on lt.LabCategoryTypeId=lr.LabCategoryTypeId
        where app.DeleteStatus='N'
        and app.AppointmentId='MLM-Appointment-60314748311012015'
        and dr.DeleteStatus='N'
        and lr.DeleteStatus='N'
    But I want following one line result by getting two sum result for 3 different types of Lab and 2 different
    type of Dia.
    AppID       LabPrice    DiaPrice
      1               300          2000
    Please, can anyone give me any idea or help how to get only one record query result.
    Thanks in advanced.
    Superman

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You failed. You should follow ISO-8601 rules for displaying temporal
    data. We need to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> I have my query result like below <<
    So you show us a result and expect that we can guess! Wow! We are magical! Did you ever read Douglas Adams? The answer is 42! Now find 
    the question. 
    Also, you have things like “lab_category_type” in this code. Is it a category or a type? In a valid data model that follow ISO-11179 rules you could have a “lab_category” or “lab_type” but never a mixed hybrid. In one of my books, I had something like “lab_category_type_id”
    as a joke; it was so stinking awful that I never dreamed any programmer would really do this! 
    Also OUTER JOINs a rare in a valid schema. A good design will have DRI so you know you have matches. Since a table is a set, their names are plural or collective; but you have only one appointment according to your unseen DDL. And only one “Diagnosis_Report”,
    etc. 
    Now think about “Lab_Category_Types” as a table. Regardless of how this ambiguous mess is resolved, it will be an attribute. An attribute is in a column, not an entity like you are modeling it. If it has a few static values then use a CHECK( x IN (..)) constraint.
    If it is dynamic or large, then use a REFERENCES. Never use a join like this. 
    That silly, magical “delete_status” looks like an assembly language flag. This is what we did with tape files in the 1950's. We would have a bit in the front of records and flip it. Later a program would  move the active records to a new tape. Ask yourself
    why everything in the universe would share a common attribute. Such an attribute would be so generic as to be useless or (your case) it would be meta data and not part of the entity at all. Oh, rows are not records; you got that wrong too. 
    Why do you keep prices in integers? Currency is decimal. Sure wish we had DDL. My guess is that this should look more like this simpler, faster query. 
    SELECT APP.appointment_id,
           LT.lab_type, LR.lab_price,
           DRT.diagnosis_type, DR.diagnosis_price
     FROM Appointments AS APP
          LEFT OUTER JOIN
          (SELECT appointment_id, diagnosis_type,
                  SUM(diagnosis_price) AS diagnosis_price_tot
             FROM Diagnosis_Reports AS DR 
            GROUP BY appointment_id, diagnosis_type)
           AS DR 
          ON APP.appointment_id = DR.appointment_id   
           LEFT OUTER JOIN       
           (SELECT appointment_id, lab_type, SUM(lab_price)lab_price_tot
              FROM Lab_Reports
             GROUP BY appointment_id, lab_type)
           AS LR 
           ON APP.appointment_id = LR.appointment_id 
     WHERE APP.appointment_id = 'MLM-APPOINTMENT-60314748311012015';
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Different company code currency

    What is the significanc of flagging "different company code currency" in OKKP setting.
    What are the advantages of the above settings?
    What kind of reports available by flagging this?
    Moderator: Please, read help.sap.com

    Hi Anilkg
    We are not able to directly check this indicator. When you select the currency type other than 10-Company code currency, this indicator gets indirectly ticked and thereon the system allows different company code currency for the companies which are assigned to one controlling area which has specific controlling area currency. There is no specific advantage or report by this tick. It only informs that different currencies are allowed for the companies assigned to the controlling area.
    Trust this helps much!
    Cheers!

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Mini-DVI to DVI Adapter issues (2 different types, no info from Apple)

    as you can see below, I have an iBook G4 1.2GHz
    three weeks ago I got a Mini-DVI to Video Adapter
    there were two different types in the Apple Store because there are two generations of Mini-DVI outputs, therefore some close inspection and it was easy to get the right part.
    Now, three weeks later, all that stuff is off the shelf so it looks like they only have up the more recent size plug. Thus, I cannot find the slightly smaller Mini-DVI to DVI Adapter. (typical Apple, probably just wants me to spend more money on a new machine)
    Anyone have a line on where to buy the older type of adapter?
    be very careful out there. They are pimping the heck out of the newer generations. I'm looking for the older one.
    (if not, I'll probably just stop buying Apple stuff. No need for the headache any more since they are no longer really different products. Just fashion)

    I have both an iBook G4 and a MacBook, which use each of the adaptors you have described. I found the information on the Apple site by identifying the Model iBook I had, Dual USB, and looking at he detailed views of each model to identify the type of 'video output port'. I obtained a '2 input' VGA switch from Tiger Direct to be able to switch my monitor from iBook to MacBook.
    Hope this helps!

  • Convert different types of files and merged them into one pdf

    Hi, everyone. I'm girl from China.
    There is folder containing severl files of different types, like doc, msg, jpeg etc.   And I want to convert and merge them into one pdf following a certain order. I know that PDFmaker can do that nicely, but the problem is that I have like 3000+ fodlders that requires the same work.
    I want to do it with VBA and Acrobat. I have a Acrobat XI Standard Version and a perfect license, by the way
    And I have got the code(Thanks, Karl Heinz Kremer) of merging two pdfs into one, but how can I convert them into pdf first?
    Thank you very much.
    If I can finish this, I would like to publish my code on this forum.

    Wow, that's great news. But how should I add the Action?
    1. There is no action named "Covert files into Pdf" in the tools panel....
    And if I write Javascript code to do this action. How should I write it?
    app.openDoc({
    cPath: "/c/temp/myPic.jpg",
    bUseConv: true
    These code only works when I specify the path of the file.
    If you know how, pls tell me..........

  • How can I get the program to recognize two different types of thermocouples?

    I am using a PCI-4351 card with a TBX-68T terminal block. I was having trouble writing and finding a program that would give me more than one reading/sec. I found a program on the NI website called "435x_logger_triggering", and so far it is the only program that I have found that will actually collect data at 60 Hz. Unfortunately, this program only lets you specify one mode for your thermocouples. This is a problem because we are using two thermocouples, one is type K and the other is a type R, so we get bad readings from one of the thermocouples depending on which mode it is set on. I would like to know how I can program in a seperate mode for each channel in this program. Un
    fortunately, some of the sub VI's in this program are password protected, so I don't know if this is possible. Everything is entered correctly in the Measurement and Automation explorer, so that isn't the problem. I will attach a copy of the program that I am using. I have modified it slightly from the one I got off the NI website, so that the thermocouple readings have a time stamp and are saved to disk. Any assistance you could give me would be greatly appreciated.
    Thanks,
    Jordan
    Attachments:
    Forest_Fire_Thermocouple.vi ‏140 KB
    435xlogger_triggering.vi ‏110 KB

    Jordan,
    You should be able to sample two different thermocouples in the example that ships with the 435x driver called "Getting Started with multiple tranducers Continous". Simply put each type of thermocouple in a different index . Each index of the Transducer Group Array can have a different type and specify the channels that correspond to that type.
    One way that you can speed this VI up is to place a wait inside of the while loop. This will reduce the number of times the software polls the card if it has available data(increasing the overhead). I would suggest about 500 ms. The data that you receive will all have the same delta t because the sampling clock is hardware driven not software, so it does matter when the data is polled.
    You will not be
    able to get 60 samples per second when you are measuring multiple channels anyway. The sample rate for multiple channels is about 9/(# channels). This is explained in the 435x Users Manual.
    I looked at your code and noticed that you tried to change some of the enumeration controls. Unfortunately you will not be able to change these because they are password protected on the low level subVIs, which is where they are defined.
    The way you select if you want the notch filter is in the 435x Config you specify fast or slow. If it is slow then it will select 10Hz as the nitch filter. If you select fast the it will select either 50 or 60Hz You would then use the function "435x Set power line frequency"
    Good luck,
    Mike

  • What are the different types of analytic techniques possible in SAP HANA with the examples?

    Hello Gurus,
    Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
    I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
    Which Analytic techniques are possible in SAP HANA?
    Thanks and Regards
    Sushma C Narasimhamurthy

    Hi Sushma,
    You can download the user guide here:
    http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
    It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
    I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
    As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
    Please let me be wrong........

  • What are the different types of bind that we can use to configure COREid?

    Hi
    What are the different types of LDAP bind that we can use to configure COREid?
    Thanks for your input.

    (http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
    7.5.2 Creating an LDAP Directory Server Profile

  • What are the different types of Wage types for Indian Payroll...??

    Dear Frnds,
    What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
    And also please list Info types numbers for different types of TAX and Allowances.
    Many thanks in advance.
    Regards
    Ahmed.

    for the list of the wage types you can check V_512W_D for country grouping 40 Inida
    for Tax related info please search the forum or search google you will get lot of inputs

  • What are the different types of exits available?

    hi all,
    Can any explain different types of exits ? user exit ? menu exit etc?
    can anyone explain me each exit with an real time scenario
    regds
    hari

    <b>Types of Exits  </b>
    There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    <b>Menu Exits </b>
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    <b>Screen Exits</b>
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    <b>Function Module Exits</b> 
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. 
    When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated. 
    Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. 
    These calls have the following syntax: 
    CALL CUSTOMER-FUNCTION ‘001’.
    <b>Field Exits </b>
    Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.  Example: The data element BBBNR identifies a company’s international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100. 
    The field exit concept lets you create a special function module that contains this logic. 
    You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number. 
    In 4.6c, you can use "RSMODPRF" program to create field exits.
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
    Note that you can write any code that satisfy your needs.                                                     ****
    But in this case, this was wrote as a sample code for reference sake.                                    ****
    And you can test it.                                                                                ****
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE. 
    Regards,
    Pavan

  • What are the different types of parameters available in function builder an

    What are the different types of parameters available in function builder and where do we use them.

    The different type of parameters available in FM are
    Import - They are used to pass the values to the function module.
    Export- They are used by FM to pass the result back to the calling program.
    Changing - The variables are passed to the FM and can be changed during the FM processing.
    Tables - Internal tables can be passed to the FM (it works similar to changing parameter).

Maybe you are looking for