KE33 report main data  and Line items in KE33 doesn't match

< MODERATOR:  Message locked.  Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
All,
I have created COPA report (cost based COPA).  When I ran the report, I have 5 line items and a total row. 
When selected one line's revenue column and hit goto - line item, it gives the line item details.  I see that the total in the line item details  is different from the report's line total. 
Can some one help me please
Also, I'm trying to reconcile the gl and copa blances.  When I ran the GL line item report it's based on company code currency and the KE24 report is in operating currency.  will it have any differences due to different currencies?
thanks,
Sri
Edited by: Sri on Oct 9, 2008 2:33 AM

Well, check if your COPA report is filtered by some characteristics. Ideally, both the balances should be the same... the COPA report always reads off the line items (or summarizaiton levels which inturn read line items), so I'll be surprised if its not the same.
For the GL - COPA rec, is there a problem with running KE24 using Currency Type 10 (Company Code currency)?
Cheers.

Similar Messages

  • Procedure for creating Recording in  LSMW with header data and line item

    Hello Friends,
    I have to do the Initial Upload of Model Service specification using LSMW ( Recording).
    Transaction : ML10
    The problem i am facing is that i have been given 2 files one with HEADER data and the other with LINE ITEM(Service data).
    Can we use the RECORDING method to upload 2 files?
    If not possible how do we proceed.
    Thanks and regards
    Ashish Naik.

    Step-by-Step Procedure:
    Details of the BAPI used in this scenario:
    Business Object: BUS2012
    Method: CreateFromData
    Details of Message Type and Basic IDoc Type:
    Message Type: PORDCR
    Basic IDoc Type: PORDCR02
    Letu2019s have a look at the BAPI first, before proceeding to the LSMW:
    1.     Go to Transaction BAPI
    2.     Click on Search Button
    3.     Enter the value u201CBUS2012u201D and select u201CObj.type(Technical Object Nameu201D
    4.     Press ENTER
    5.     Following screen appears:
    6.     On the left side of the screen, Expand the u201CPurchaseOrderu201D.
    7.     Select u201CPurchaseOrderu201D and double-click on the same for details.
    Building LSMW using BAPI:
    1. Go to Transaction LSMW.
    2. Enter the Project, Subproject and Object information and click on CREATE.
    3. Enter the descriptions for Project, Subproject and Object as prompted.
    4. Now select Settings à IDoc Inbound Processing
    5. u201CIDoc Inbound Processingu201D screen appears. Enter the required details as shown below:
    6. Click on u201CActivate IDoc Inbound Processingu201D.
    7. Click on u201CYesu201D when prompted for u201CActivate IDoc Inbound?u201D
    8. Hit on u201CBacku201D to return to the main screen.
    9. Click on Continue (F8). Following Screen appears:
    10. Select the Step 1 u201CMaintain Object Attributesu201D and select u201CExecuteu201D.
    11. Select the radio button u201CBusiness Object Methodu201D and enter the following details:
    Business Object: BUS2012
    Method: CreateFromData
    Hit ENTER
    12. Save and click on BACK button. Following information message is displayed.
    13. Now select step 2 u201CMaintain Source Structuresu201D and click u201CExecuteu201D.
    14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
    Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on u201CCreateu201D again to create the child structure. Following popup appears:
    Select u201CLower Levelu201D and click on Continue. Enter the Item data structure name.
    Click Save and hit BACK button to go to the main screen.
    15. Select step 3 u201CMaintain Source Fieldsu201D and hit execute.
    16. Enter the fields as shown below:
    17. Click SAVE and return to main screen.
    18. Select step 4 u201CMaintain Structure Relationsu201D and click Execute.
    Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
    Select HEADERDATA and hit ENTER
    Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
    Click Save and return to main screen.
    19. Select the step u201CMaintain Field Mapping and Conversion Rulesu201D and click on execute. Maintain the Field Mapping as seen below:
    20. Select step 7 u201CMaintain Source Filesu201D and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
    Save and return to main screen.
    21. Select the step u201CAssign Filesu201D and click on Execute.
    Assign the file provided to the source structure. Here the same file is provided for both the structures.
    Save and return to the main screen.
    22. Select the step u201CRead Datau201D and click on Execute.
    Click on Execute.
    Return to the main screen.
    23. Select the step u201CDisplay read datau201D and click on execute.
    Click on the structure name to get the field level values.
    24. Return to main screen and now select u201CConvert Datau201D.
    25. Return to the main screen and select u201CDisplay Converted datau201D.
    26. Return to main screen and select u201CStart IDoc generationu201D.
    27. Now select the step u201CStart IDoc Processingu201D on the main screen.
    28. Return to main screen and click on u201CCreate IDoc overviewu201D. Here the data record and status records of the IDoc could be viewed:
    Check this. This may help

  • Customer Master Data and Line Items Balances Display - Authorization Group

    One autorization group was created and assigned to some customer masters in General, Company Code and Sales Area's.
    User is restricted to one authorization group. When executing FBL5N, all customer balances are displayed i.e. including blank authorization group customer. It is not restricted to authorization group customer! Why?

    Kindly check the authorization objects assigned in the user profile. You may ask your basis to help you with the authorization.

  • AR Transaction Data vs Line Item

    Hello,
    I have need to generate a report with some degree of detail and I am having an issue understanding the correlation between AR Transaction Data and Line Item.  In a report I would like to show sales for the period and AR balances and I need to be able to drill down on these (at Profit center level or Business Area Level both Characteristics have been added to the extractor and are being populated).
    How is Sales for Period derived in Transaction Data?  Can I create this same Key Figure at the Line Item Level?
    Any assistance is greatly appreciated.
    MK

    Sales are derived from the posting key used to post a AR document
    The posting key is either sales/turnover relevant or not
    As peopel use posting keys for all sorts of thingss- this is not the ideal solution to report Sales
    it also includes VAT
    ow ar eyou planning to add Profit Centre -?
    Conside the following document
    Dr Debtors £117.50
    Cr Reveneu Prfit centre 1  £50
    Cr reveneue Profit Centre 2  £50
    Cr VAT £17.50
    how are you going to get the profit centre onto the debtors postings?
    You can't... you can see the data in 0EC_PCA_4 or you can join Ar4 ODS to the GL ODS via an infoset

  • GL Custom Reports not displaying source and line item Data after Upgrade

    Hi,
    I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
    None of the GL reports is showing the Source and Line Item details.
    Thanks,
    Arun

    I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
    None of the GL reports is showing the Source and Line Item details.Have you verified the queries of those reports after the upgrade? And, when you say upgrade, do you mean from 11i to R12?
    Did you set the application context properly?
    How to set the Organization Context in R12? [ID 437119.1]
    Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
    SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
    Setting APPS Context is mandatory step while loading data using public APIs [ID 473615.1]
    Thanks,
    Hussein

  • Header and Line Item reporting (MultiProvider)

    Hello All,
    We have data coming in from a LO Extractor.  There are 2 extractors.  1 for line item the other for Header.  The line item extractor has all the fields for both so we decided to use this extractor (the line item).
    Question is, when extracting this data multiple records come over.  Let's say the order has 2 line items.  It brings over a header record and then 2 line item records.  We have it going to an ODS and then Cube.  The ODS key is order number and item.  Well the header record comes over with item number #, so 3 records hit the ODS.
    How do you handle this?  We saw something about denormalization and make this header record item number a 0.
    Can someone explain to us how to handle this?  We also read about a Constant selection and loading the header record and line item as we are to both the InfoCube, but we just don't understand this solution.
    Please help, Thank you

    Item level will have all fields those are in Header level.Header level data will be a subset of Item level data.Load only Item level and when you require header data remove Item number in that relevant DSO and you can see all the data summarized to header level in overwrite mode.
    This will not be good option if you require some fields that may have different records in the header and the item.
    One better option is create a secondary staging DSO that updated by header, item and schedule line level and you can choose your own data fields and key fields. You can update them in overwrite mode to have summarized records that avoids duplication of records from header and item for same document.
    Constant selection wil be helpful in the report level not during load process.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e7/5f983c1a356858e10000000a114084/frameset.htm
    This will ensure total displayed is constant even after navigation. So it hides repetitive records displaying after drilldown.

  • Urgent - "Vendor balances carried forward and line items report."

    Hello,
    Is there any report which will give me the vendor balance carried forward and the line items during that period.
    ==============================================
    Format-
    eg: statement taken from 1.8.2006 to 30.9.2006 is required as
    Bal b/f …………………………… 25000 cr.
    3.8.2006 Purchase Inv XXX ……   3000 cr.
    5.9.2006 Payment Chq XX ……  26000 dr.
    Bal c/f ……………………………  2000 cr.
    ==============================================
    Please advise on this.....
    Regards,
    J

    thanks for the response, but i have already tried those transactions.
    FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
    F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to  be in the format given above..
    like say, account statement.
    Please advise............
    Regards,
    J

  • Header data in xml tags and line items in fixed length but both in same fil

    Hi,
    In my scenario target side in header level i am passing all the values are fixed values and line item vaues are getting from the source data.how to write udf for this scenario.It should be graphical mapping.
    Please help to me
    please reply fast
    Thanks&Regards
    Swathi
    Edited by: SWATHIP on Feb 4, 2011 7:16 AM

    Hi,
    1) If your values are numerical you can use the "FormatNum" function under Arithmetic Functions.
    This will help you fix the length of the number and even the decimal part.
    2) If you want to fix the length of field which is of type string, you can try the following code:
    public String setLength(String var1, String var2,  Container container) throws StreamTransformationException
         /*   var1 will have the String Value, in var2 pass a constant integer of fixed length you want  */
         int len = Integer.parseInt(var2);
         String rslt = var1;
         if( var1.length() < len)
             for(int i = var1.length(); i < len; i++)
                 rslt = rslt + " "; // appending space
         else
               rslt = rslt.substring(0,var1.length - 1)l
         return rslt;
    regards,
    Aravind
    Edited by: ajnayak on Feb 7, 2011 7:25 AM

  • According to PO number and Line item data should come once but its repeatin

    I am calculating IR Quantity and IR value......
    for a PO  if there are four same  line items i wanted them once but they are displaying for each and every line item
    If my po is 2003000151 and line item 0010 if both are same then i wanted ir quantity 500
    but its displaying like this
      PO                 item   IR
    2003000151   0010 500
    2003000151   0010 500
    2003000151   0010 500
    2003000151   0010 500
    I need like this
    2003000151   0010 500
    2003000151   0010
    2003000151   0010
    2003000151   0010
    If po number and line item are same IR quantity should be displayed only once..
    What should be done if it should not repeat in each and every line item if both PO and line item are same

    i am having internal table of it_ekko.
    in that i am having some data of PO no, Line Item,IR value and IR qty......
    i am having data like below.
    PO                        Line Item   IR Value    IR QTY 
    200310051          0010         1500           4500
    200310051          0010        1500           4500
    200310052         0010           0                   0
    200310052          0010       0               0
    now where ever IR value and IR qty is present i wanted that to display only once against that PO and line item
    i wanted like below
    PO                        Line Item   IR Value    IR QTY 
    200310051          0010         1500           4500
    200310051          0010            0              0
    200310052         0010             0                0
    200310052          0010            0               0
    Field names for IR value and IR Qty are Menge2 and dmbtr2.
    How to do that.........
    I cant use
    Delete adjacent duplicates of it_ekko by ebeln = wa_ekko-ebeln and
                                                                          ebelp = wa_ekko-ebelp.
    because i wanted that po and same line items , how many times it is like that only.....
    in it_ekko table i only wanted to delete duplicates of menge2 and dmbtr2.
    Pls suggest the code

  • Open Item and Line Items are not matching

    Hi Gurus,
    I ran the EFT for vendor #1600109 for payment on 10/18/07.  If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403). 
    When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403). 
    User wants the open item report should tally the line item display.
    I will assign good points.
    Thanks for your help
    Prashanth

    Hi Gurus,
    EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
    We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
    Clearning date is 18th
    Posting Date is 15th.
    Thanks
    Prashanth

  • Business Area is not getting updated in "Main Bank Account" Line item (FF_5

    Hi Gurus,
    I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
    Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
    Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
    Rgds,
    Prasad.

    Hi,
    1. In case of Business where payments are made centrally it is important to report
        Bank A/c Business area wise.
    2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
    3. I am however getting one error while doing the upload in FF_5. The error occurs
       only if Business Area is a "required" field in Bank Account's "Field Status
       Group".
       Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
       But if I make Business Area as an Optional Field I am not getting an error and
       also the posting is done to Main Bank Account.
    Is there anyother method by which this error can be corrected.
    I have assigned 2 points for your inputs. Can you help me to solve this error as well.
    Rgds
    Prasad

  • Header and line item headings in new page in Sapscipts

    HI,
    In Main window, I am displaying the header details.
    In a box below, I am displaying its item headings and item data details. Now when the no. of line items exceed the first page, they are displaying in the second page with other windows, but the header details, box and the line item headings are not getting displayed in the next page.
    Can anyone help me How to get the box, line item headings and header data also in the next page..
    thanks in advance........
    Rakesh

    Hi Rakesh,
    The header details, item headings and the box are also in the main window, thus, if the items exceeded and a next page is triggered, it will still continue to display the items until the loop ends.
    what you can do is that you can make a separate /E elements for header details, item headings, box and line items. so if a new page is triggered, you can call again the elements for header details, item headings, and box, then continue with the line items.
    Thanks,
    M

  • PO comparison with similar materila number and line items

    Dear Friends,
       I wish to know in a report how i classify the pos having similar material and line items in each other, Like po number is 12 and has material numbers 1, 2, 3
    where po number 13 and has material 1,2,3. how i fetched the data from the table and classify them with similar material and line items, please tell me. any article, example, code will be grete help of mine,
    thanking you
    regards
    Naim

    Guess you need to display report with Purchase Order nos where Material nos are similar.
    On selection screen add parameters Material and Line Item no. Both should ba mandatory.
    Get data from EKPO where MATNR = P_MATNR and EBELP = P_EBELP.
    Display the same in report output.
    Just need to check with you - Material nos can be same on multiple POs but Material, Item no combination may not be.
    I can use same material in another PO with different Line Item as other PO already has some line items. Why do you need this check?

  • Report for GR/IR line items - with PO details - profit center wise

    Hi
    My client uploaded stock and instead of using MIRO, directly passed the journal entry
    Consumption
    To Vendor
    Now, the original entry of
    Stock
    To GR/IR
    remains.
    How can I make the GR/IR account nil and also remove the open items in the corresponding Purchase Order ?
    Thanks in advance.

    Hi,
    You can use a substitution to update the field through FI. Use GGB4 for wirting a substitution you may need some ABAP coding to substitute PO no and line items in the assignment field.  rule would be Co code =XXX and GL account =xxx and Posting date earlier than =xxxx  then concatenrate EBELN and EBELP in Assigment field Zounr.
    Then execute FBL3N and edit the assignment field by selecting all the documents and then save it you should see the PO line items populated. You can leave the substitution on or you can remove it after updating,
    Regards
    K.R

  • G/L Balance and Line items difference

    Dear Mates,
    We have a Inventory-Spare Parts G/L account
    When i see the FS10N g/l balances ,there is a figure appearing as 25,82,887/- in the period February and when i double click on the above said figure to see the line items whose total comes to 30,89,627/- with doc.type: WA.
    Can please tell me ,what could be reason for the difference between Balance appearing on the initial screen and line items total.
    Please treat it very urgent as auditors are sitting on my head.
    Thanks
    Subbu

    Hi,
    First let me know the SAP R/3 version and fiscal year.
    In the mean time, you can also check any changes has been made to your GL account master data related to line item display.
    all the best

Maybe you are looking for