Keeping current selection in select box

hi,
I have several select boxes which get posted on the same
page, but they never keep the values entered, how can I once
submitted show the previous selection?
The same goes for the radio buttons.

Suppose you have a table in an illustrator document as follows: (You may create a real one in illustrator)
column 1
column 2
24.98     -3.5
100       +50
34.94     -3.5
456       +50
11.00     -3.5
352       +50
10.08     -3.5
786       +50
How would you go about removing all the "-3.5"s in column 1 and then the "+50"s in column 2 without deleting any other figures or lines.
Your assistance is very much appreciated.

Similar Messages

Hope I'm in the right place. First time user. Not tech savvy. Just upgraded to OSX Mavericks. Box keeps asking me to enter my iCloud password. I keep entering my password but box keeps popping back up asking for password?! I selected cancel but what

Hope I'm in the right place. First time user. Not tech savvy. Just upgraded to OSX Mavericks. Box keeps asking me to enter my iCloud password. I keep entering my password but box keeps popping back up asking for password?! I selected cancel but what should I do next time it asks for my iCloud password? Is my iCloud working? How do I retrieve my password?
Thanks

In the iCloud pane of System Preferences, uncheck the box marked Mail and check it again.

Enable to select a check box in ALV while accessing it through portal

Hi All,
Currently I have given a link on portal to run a transaction code. The output of the program is ALV report, where user any select the check boxes.
Now when I try to select a check box, it is not getting selected. I click on the checkbox, the tick appear and then the screen refreshes itself and the tick goes off. This is happening only when accessing it through portal. If i run the program in R/3 directly, I am able to select the check box.
Please advice on this.
Thanks
Namit

Reported to SAP for the same.

Is there really no way to keep the Typewriter Tool selected in v8.2.1?

Hello All:
I find it almost unbelievable that Adobe Acrobat Professional cannot keep the Typewriter Tool selected; is this possibly true?
I use many scanned formed that simply do not convert; I cannot make all of the entry fields text boxes. That wouldn't matter if the person completing the form could simply use the typewriter tool, as I am not looking to massage the data in any way. But to ask them to click on the Typewriter Tool after every single entry is ludicrous. Instead, they print out the forms and answer them in pen! (Kinda defeats the whole point.)
Is there any way to keep the Typewriter Tool selected?

Have you checked the 'keep tool selected' checkmark in the Properties for the Typewriter tool? You have to do it after you have selected the Typewriter tool, but before you have actually used it.

How to disbale a group of checkboxes when i select one check box WEBDYNPRO

Hi Friends,
Can any body help me how to disbale a group of checkboxes when i select one check box WEBDYNPRO Abap
Also can any body tell me how to handle chain endchain type of scenario in WEBDYNPRO Abap
Thank you..
Sai

Hi
In the context tab , create 2 context attributes ca_attr1 and ca_attr2   of type WDY_BOOLEAN under a context node cn_node
now in ur Layout , bind the ENABLE property of CheckBoxGroup UI Element with this attribute ca_attr1
bind the ENABLE property of CheckBox UI Element with this attribute ca_attr2
create a action for ur Checkbox , for the OnToggle property of ur checkbox
in OnactionToggle , check if ca_attr2 is 'X' , set ca_attr2 to ' ' ( for disable)
this can be done by code wizard , press control +f7 and use read/set context attributes , use get_attribute and set_attribute methods
// if ca_attr2 is 'X'
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr2.
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   get single attribute
    lo_el_cn_node->get_attribute(
      EXPORTING
        name = `CA_ATTR2`
      IMPORTING
        value = lv_attr ).
// if lv_attr2 is 'X' , use set_attribute method for ca_attr1
IF lv_Attr EQ 'X' .
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR1`
        value = ' ').
ENDIF.
regards,
amit

Calling a bean method on select of Combo box item

Hi
On select of Combo box item in a form, text fields in the same form should be populated
dynamically.Is it possible to call a bean method which does this,by calling onSelect() method
of combo box ?
Thanks in advance,
Sridevi

Uff, sorry!
I ment that you write some code for the "onSelect" event which sends a request to the server with the selected value: onSelect="self.location.href='<%= request.getRequestURI()%>?selectedVal= ' + this.selectedIndex;"

Re- Single click in the check box ensure to select all check boxes

Hi All,
I have an issue to notify the urgency of the cart to the buyer while creating the cart.For that scenario we have a check box in the Basic data of shopping cart.I added the check box in the basic data. Now the quote check box is available for all the line items.
The requestor can select any check box in any line items,so whenever he selects the check box- automatically all the check box should get selected , if any of the check box get deselected then imediatelely all the check box in different line items also should get deselected.

Hi Batchu,
Thanks for your reply, See if you add any custom field it will come one by one in the basic data section. Adding one more check box doesnot work for this case.
Moreover the problem is change to any particular line item can be captured in DOC_CHANGE_BADI but i cannot bring the same change to all line items (ie) If 3 rd line item check box is marked then immediately rest of the line item also should get marked.
In the case of DOC_CHECK_BADI to identify the line on which the change happens is tough.
SO thats is the problem for me to bring the logic in the code.
Please if any one come across similar kind of issue please give your suggestion.
Thanks,
Sibi

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.
Photoshop General Discussion

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregon

mikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR

"Always Use Selected Format" check box in line items report

Hi Experts,
I have an issue in ECC 6.0.
From the transaction code FBL1N (Vendor Line Items) I am trying to export the report to spreadsheet by selecting the option List> Export>Spreadsheet then I have selected "Always Use Selected Format" check box. But if I execute the same report again I am not getting this option "Always Use Selected Format". Please let me how can we retrieve that option. Is there any possibility to get that option again either functionally or technically. I would like to know all the possible ways to get this option again.
Please do the needful.

Hello,
In one my thread Mr. Frank has replied as follows. I believe he has solved this.
Hope this may be really helpful.
The problem with the spreadsheet download is at one point, users have selected their default file type.
That said, SAPGUI is working as it should. (gui710)
Question though is how do we reset the values so they get the ?Select Spreadsheet Format? popup again.
The following steps should be performed :
- Call transaction SE38, enter program SALV_BS_ADMIN_MAINTAIN, and press F8.
- Follow the parameters below :
- Select ?DELETE? on the Actions Group
- Select ?DETAILED SELECTION? on the General Data :
- On Client - your number
- User : <user name>
-Hit EXECUTE.
-Press ENTER on the POPUP
- If there is an entry in the report that will need to be deleted. Also, make sure that the entry you will delete (for the user) has a value of GUI_ALV_XML_VER on field ?Parameter? .
- Select the line and hit the DELETE icon .
- Press ?Y? to continue delete. Press ENTER on the popup.
- Then EXIT all the way out of the program.
NOTE : When you run program SALV_BS_ADMIN_MAINTAIN, make sure they are out of any program that they are using for download.
Re: "Always Use Selected Format" check box in line items report
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 15, 2009 2:31 PM

How to show default value selected in combo box...

Hi,
I need an help...
I have a combo box and i want to show the default value(coming from DB) selected on combo box on Page Render.
Thanks,
Neha

Hi,
Will this help?
database default value in selectOneChoice
Set default selected value in a SelectOneChoice
Regards
Vishal

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

Query to get objects list for which the current user has 'SELECT' privilege

Hi,
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
From these findings, I have composed below query
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
Have I got user's all prvilege details? should I look some other system views?
How to exclude system table privileges details?
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
What about Public role in Oracle? Should I consider public role here?
Oracel Version :11g
I want make this query to work on Oracle 8i or above version
Thanks

>
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
>
You will need a hierarchical query to do that.
Try this script for Listing privileges recursively for Oracle users
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html

HOW TO KEEP 3 LINES IN SELECTION-SCREEN

hi all,
i have a requirement.
i have to keep one field in selection-screen say v_text whose length is 70 characters .
and i have to display text as follows
<System Date> ': EST STATUS:HUNGARY PROJECT:'
in form of 3 lines by default.
any one can send me the sample code how to do this.
Thanks,
Maheedhar.T

Maheedhar,
try this code..
data: v_text(80).
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) v1 FOR FIELD p_monat.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) v2 FOR FIELD p_monat.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(10) v3 FOR FIELD p_monat.
PARAMETERS p_monat LIKE bkpf-monat.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'aaaaaaaaaaaaaaaaaaaaaaBBBBBBBBBBBBBB'.
CONCATENATE sy-datum v_text INTO v_text SEPARATED BY space.
v1 = v_text+0(30).
v2 = v_text+31(30).
v3 = v_text+62(10).
-Anu
Message was edited by:
Anupama Reddy
Message was edited by:
Anupama Reddy

Dynamic selection of check boxes on selecting a check box

Hi Friends,
I have to select the check boxes which are herarchically lower to a top check box,dynamically.
Eg:
Checkbox1
   checkbox2
   checkbox3
so if i select check box 1, on the screen both checkbox2 and checkbox3 have to be selected.
I did like below.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF P_ALL = 'X'.
      P_VAT = 'X'.
      P_NAME = 'X'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
but values are checked but on screen its not checked.
how to handle this.
Regards,
Simha

hi
do like this
paramenter: check_1 type c as check box at user-command ,
check_2 type c as checkbox default X,
check_3 type c as checkbox default X.
At selection Sreen output
if check_1 = 'X'.
loop at screen .
if screen-name = 'check_2'.
screen-invisible = '0'.
endif.
endloop.
loop at screen .
if screen-name = 'check_3'.
screen-invisible = '0'.
endif.
endloop.
else
loop at screen .
if screen-name = 'check_2'.
screen-invisible = '1''.
endif.
endloop.
loop at screen .
if screen-name = 'check_3'.
screen-invisible = '1'.
endif.
endloop.
endif.
this solve ur problem
Cheers
Snehi

Preventing check-box selection/de-selection

Hi
How can I prevent a user from selecting/de-selecting a check-box. I do not want to disable it.
Thanks
Sangeetha

I was able to stop selection with a mouse by removing the MouseListeners from the checkBox.
The same approach didn't work for removing KeyListeners, so I ended up adding a KeyListener and consuming the KeyStroke:
MouseListener[] actions = (MouseListener[])checkBox.getListeners(MouseListener.class);
for (int i = 0; i < actions.length; i++)
     checkBox.removeMouseListener( actions[i] );
// KeyListener[] keys = (KeyListener[])checkBox.getListeners(KeyListener.class);
// for (int i = 0; i < keys.length; i++)
//     checkBox.removeKeyListener( keys[i] );
checkBox.addKeyListener( new KeyAdapter()
     public void keyPressed(KeyEvent e) { e.consume(); }
});Does anybody know why I couldn't remove the KeyListener?

Keeping current selection in select box

Similar Messages

Maybe you are looking for