Kernel Panics!  (I'm pretty sure I know the cause- but how do I fix it?)

Okay, so I installed a program called fkeys that changed my caps lock into some other key (supposed to be control, but seemed more like it was option). Eventually, though, I discovered that the caps lock key is not as useless as I thought, especially when I want to express extreme emotion while chatting.
So I tried to uninstall it. Apparently fkeys is a kernel extension (that came with many warnings before installation) that doesn't have an uninstaller. Well, I read the warnings, but uninstalling looked simple enough.
There is unfortunately no automagic uninstaller for fKeys yet. To uninstall fKeys, execute the following in an Xterm or Terminal window:
sudo kextunload -b com.kodachi.driver.fKeys
sudo rm -rf /System/Library/Extensions/fKeys.kext
sudo rm -f /System/Library/Extensions.kextcache
sudo kextcache -k /System/Library/Extensions
sudo rm -rf /Library/Receipts/fKeys.pkg
I mean, just cut and paste right? Well, what ends up happening is that the first command asks for my password. I do that, continue on with the next ones. Oddly enough, the next ones don't get me any response from terminal. So I try them a few more times (entering those commands in terminal). The second or so time that first command results in terminal telling me the driver can't be found.
Then I decide to try reinstalling it because it didn't seem like I uninstalled everything. So I try that, but the install doesn't work. I tried the other version... the install dmg doesn't even mount. So I decide to restart... and boom, kernel panic. (Unfortunately, I have experience with kernel panics from ram problems).
Soo...
-It says that it's "unable to find drivers for this platform: powerbook: 5,6"
-I have a 1.67ghz Powerbook G4, w/latest updates and stuff.
-Safe mode does not work
-I'm pretty sure this falls under "6.1. Assure drivers and kernel extensions for third-party hardware are current" from the xlab faq as this occurred from me trying to uninstall a kernel extension.
I don't have my install discs with me. When I get them, I'm planning to boot off of them... but what do I do from there?
Would I be able to uninstall the kernel extension? Or do I have to resort to a archive/install? Would that even fix it? Am I going to lose all my data? x_x
Thanks in advance!
edit- My friend tells me it's possible to boot off the disc and then access the hard drive and then move the data I want to an external hd... is that an option too? How would I do that? Once again, thanks a lot.

Hi Eliott,
I'm surprised no one has tackled your problem. Maybe this will bump it to where someone more knowledgeable will see it. Anyway, I'd guess that the reason the Terminal commands after the first one "got no response" is that once you authenticate sudo, you're good for a limited time, so the rest of those lines ran without needing further authentication. But I don't know enough about those commands to know just what got hosed. Maybe someone who does could prescribe the correct micro-surgery.
When you get your disks, you could try booting to the disk (hold C key at the chime), and run Repair Disk from Utilities in the menus at upper left (don't go into the Installer). You want to get two consecutive "HD appears to be OK" reports. If that doesn't work, you are probably in for an Archive & Install. You shouldn't lose your data but it's best to be backed up. Similar to what your friend suggested, you could try connecting by FireWire to another Mac and booting into FireWire Target Disk Mode to pull your data off the disk before re-installing. I hope this is some small help-- good luck!
TiBook 867MHz 1 GB   Mac OS X (10.4.7)   G5 10.4.5; LaCie d2 160GB

Similar Messages

  • "Kernel Panic" with log file: what could be the cause...?

    Hi,
    Today I had my 3th "kernel panic" if I'm right.
    I have an IbookG4 1,42GHz.
    I've already post my problem, with log, on a dutch Apple forum but the people don't know what the log means. The problem can't be new hardware (more memory) because I haven't installed more and new hardware except that I have an external Harddrive.
    One people suggest that I reset my PRAM, NVRAM and PMU and control my HD. That I have done but if the problem is solved, I don't know.
    What I was doing the last 2 times when a "kernel panic" occured: I was working with VectorDesigner. The last time, that program was the only one open. Is it possible that my laptop can't cope with that grafic program, the laptop gets overload and crashes?
    Also, when I restart the laptop after the "kernel panic", the laptop ask to push on a button to send a paper to Apple, but if I do so It seems to do nothing. So has it send a paper, I don't know.
    Below the log of the last 2 kernal when I was working with VectorDesigner. I hope that someone could read this log and understands it and know what the cause is of the kernel panic:
    Thu Mar 27 17:43:51 2008
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
    Latest crash info for cpu 0:
    Exception state (sv=0x2EFAE000)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Proceeding back via exception chain:
    Exception state (sv=0x2EFAE000)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2F0A6A00)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x2EFAE000)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Exception state (sv=0x2F0A6A00)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Apr 7 14:00:05 2008
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
    Latest crash info for cpu 0:
    Exception state (sv=0x212C2500)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Proceeding back via exception chain:
    Exception state (sv=0x212C2500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x21249C80)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x212C2500)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Exception state (sv=0x21249C80)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Greets,
    Sven

    Maybe something on this page will help you. Scroll to the kernel panic causes near the bottom.
    http://docs.info.apple.com/article.html?artnum=106464

  • My ipod is disabled, but I know the correct password, how can I fix this?

    My son's ipod touch got disabled when his cousins tried too many passwords.  I know the correct one and want to enter it and fix the problem.  How can I do this?

    Hi brieeastwood,
    If you are having issues with a disabled iPod touch due to multiple incorrect password entries, you may find the following article helpful:
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Regards,
    - Brenden

  • A few months ago i lost my ipod nano im pretty sure its in the house but i cant find it i dont have i cloud and i cant get it because i forgot what email i used what my password was and im using a new laptop now is there any way apple could look for it

    so basically i want to know whether or not apple could do something to find it

    There is no way to remotely track or disable an iPod nano, either for you or Apple. As it can't connect to the Internet on its own, Find my iPhone isn't available for it.
    (84600)

  • Im sick of the plug in crashing.I dont know why it keeps doin it. Im pretty sure I have the lastest version.Help

    Whn Im playing games or jus browsing the plug in crashes ALL the time.Or the screen goes light and it says firefox not responding.I also will be on something and all of a sudden 4-6 other tabs open up for no reason.Iam really tired of this happening and I have sent numerous crash reports and nothing is being done.Im pretty sure I have the lastest version of plug in but it dont help.

    Your System Details List shows multiple Flash plugins.
    # Shockwave Flash 13.0 r0
    # Shockwave Flash 11.6 r602
    You can find the installation path of all plugins on the <b>about:plugins</b> page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
    *(32 bit Windows) C:\Windows\System32\Macromed\Flash\
    *(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

  • I'm pretty sure i have the most recent software on my iphone. however, i've never been able to sync my notes from the iphone to my laptop. under the info tab on my iphone, when it

    i dont even know if im in the right community.
    anyway, the thing im having trouble with is syncing my notes. im pretty sure i have the most recent software for the iphone 3, i think. however, i've never been able to sync notes from the iphone to my laptop. i havent even had the option before. i do now, but on the info tab for my iphone, the one that pops up when it's plugged into the laptop, it has the option to check the box next to sync notes with... however, there's nothing on the drop down menu, so even with the sync notes with.. option selected, nothing happens.
    i have 350+ notes, so emailing them to myself is out of the question. any help would be much appreciated!!

    I deauthorized and then reauthorized my iTunes and this seems to have done the trick!

  • Kernel panic keeps happening even after I did the factory reset. any suggestions ?

    kernel panic keeps happening even after I did the factory reset. any suggestions ?

        Hi Hallry,
    Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • When I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

    when I request a software update, i am told my software is already up to date but I know it's not. how can I fix this?

    The pre-2006 iMacs this forum covers cannot run any higher than OS10.5.8, and Apple pretty much stopped pushing out any updates for anything other than the current version.
    If your iMac is a newer model (covered here: iMac (Intel) forum) you can run at least 10.6.8, available for purchase rather cheaply here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and it's possible you can run higher depending on your iMac variant. So find your iMac variant, please do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info" button to get this screen:
    Please tell us the code name ans number for your computer in the line I've indicated with the red arrow. For an iMac, it will either be in the format, "PowerMacX,X" or "iMacX,X" depending on the age of your iMac. The trailing numbers where I put Xs will help us help you determine what exact variant you have and what upgrade options are available.
    Also tell us how much RAM is installed. Newer OS versions often need more RAM that older iMacs shipped with.

  • HT3500 My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550.  This has operated fine for a long time, but now th printer cannot be found when TimeMachine back ups are taking place.  Does anyone know the cause & remedy please?

    My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550.  This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running.  Does anyone know the cause & remedy please?

    Your points match mine pretty well,though here are some thoughts:
    1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
    2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
    3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
    4. That matches my experience.
    My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

  • HT4061 hey my phone been stolen and I don't know the IMEL number how can I get it?

    hey my phone been stolen and I don't know the IMEL number how can I get it?

    from your carrier would be a start.

  • If i dont know the icloud id how can i activate my iphone

    if i dont know the icloud id how can i activate my iphone

    Why do you not know the Apple ID that is on your iPhone?

  • I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........

    I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........
    <Personal Information Edited by Host>

    RichardRicardo wrote:
    I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
    Sorry... But...  The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.
    There is No Workaroud for Activation Lock.

  • HT4759 I did a a factory reset to my I phone 4G but it ask for the original owner account but I don't know the original owner, how can I activate my device?

    I did a a factory reset to my I phone 4G but it ask for the original owner account but I don't know the original owner, how can I activate my device?

    Unfortunately, you can't.  There's no way around it.  You'll have to get the ID and password used to originally activate the phone or you will not be able to activate it again.  If you can't contact them, try to get your money back because you won't be able to use it.

Maybe you are looking for

  • 0176 Security - The system has been tampered with

    So the machine is a T40. It hasnt had any passwords for atleast the 2 years ive had it. The main battery has been bad and the cmos battery died recently (id assume the bad main battery helped it along). After replacing the cmos battery (tested it wit

  • Problem Updating some Apps

    When trying to update some apps I get "This item is free in the store". It asks me to enter to authenticate, and then it repeats the process.

  • IPhoto hang on Import

    iPhoto 11, update 9.2.3,  is hanging when importing photo's, no matter if the source is a file, iPhone or a camara. I reinstalled iPhoto, did a mediathek db repair, a mediathek acces rights repair but nothing worked.  iPhoto can only be forced termin

  • Reports for User's T-code.

    Hi All, I want to know is there any report to find the what are all the  T-code user has in his user master data.I want to generate this report for bulk user at a time.I can see in SUIM where we can generate for single user not for Bulk user.Please s

  • Maintaining different no ranges for different backend system

    Hi Our SRM system is connected to 2 backend systems. Requirement is to maintain shopping cart nos differently for each system.Should I create a new transaction type SH1 and SH2 and maintain the R/3 nos there OR Is there any other option