Kernel26-2.6.21 from testing

I have an Intel DG102GC2 motherboard. It booted fine with the latest 2.6.20 kernel though had to use the kernel parameter noirqbalance to get it to boot. Kernel26-2.6.21 boots only with acpi=ht parameter. However the nvidia module loads but X cannot start. The vesa driver loads X. I am certain that the problem lies with ACPI. However I cannot get this kernel to boot with ACPI enabled on my machine.

Just found that my other computer which does boot the new kernel also hangs at loading standard ACPI modules if a usb disk is plugged in during boot. However on removing the usb disk and resetting it boots normally. The dg102ggc2 motherboard has an ATI Chipset and not an intel Chipset. This is most probably the cause of the ACPI hang. Will wait for the new kernel to be updated.

Similar Messages

Alsa-driver and kernel from testing

Hi!
This morning I ran pacman -Syu and there were question:
replace alsa-driver with kernel26 from "testing"
Are alsa drivers included now in the kernel, please?

lucke wrote:As tpowa indicated, alsa-driver was only used by kernel24 - as introduction of the new kernel26 drops kernel24 support in Arch whatsoever, alsa-driver is obsolete as well.
Thank you and tpowa too .
Arch is better and better...

Problem with kernel 2.6.19 and ipw3945 from testing

After kernel and ipw3945 packages update from testing my wireless network profile isn't working any more so there's something wrong with one of those. Ipw3945 module is loaded but network profile simply fails to start (maybe problems with dhcp?). With kernel and ipw3945 from current everything works fine.
Anyone has similar problem?

congyiwu wrote:
The extra repository seems to already have 1.1.2... I was having the same problem so I ran "pacman -S extra/ipw3945"
Does anyone know why pacman -Syu doesn't automatically figure out that the version in extra is newer than the version in testing?
The extra version (i.e. the one that's been upgraded to 1.1.2) was compiled for the kernel26 package in extra (2.6.18), wheras the version in testing was compiled for the kernel26 in testing (2.6.19). Thus the module in extra won't work if you're using the newer kernel.
I hope the testing package gets upgraded soon, since it sucks not being able to use wireless! I tried to update the PKGBUILD myself, but couldn't get a working module...

How to configure Crystal Report from Test DB to Production DB

Hi,
I have a VB/asp.net application that is currently using Oracle DB.
Now, I'm creating a new Crytal report that will connect using any userID, password, database, servername on runtime.
When I created the Crystal Report I used the Oracle OLE/DB connection using the test database logon information now I would like to make this dynamic at form load event which I have my crystal report viewer configured and then pass the dataset regardless if it is coming from test or production database.
Now, at form load connection using the test database I can see the report properly which I provided with the same logon information when the crystal report was created but when I switch the login using the production database, it doesn't get the correct datasource and logon information and it still uses the test datasource.
I would appreaciate if you can give me a solution or any links of the previous threads that has similar issue with resolution or any sample that may help.
Thank you,
Ryan

Hi Ryan
I'd start with these samples:
csharp_win_dbengine.zip / vbnet_win_dbengine.zip
csharp_win_subreport_logon.zip / vbnet_win_subreport_logon.zip
Link to the samples and others is in this wiki: Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Next, I find the Crystal Reports for Visual Studio 2005 Walkthroughs to be an absolute gem (and it applies to all versions of CR and VS).
And of course, the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
Now, one thing you don't mention is which APIs you are using; CR, or RAS - both of which may be available to you depending on the version of CR and VS you are using... RAS Developer Help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
The RAS APIs are a bit more complicated, but way more powerful. And there is even a utility that will write the DB logon code for you:
KBA: 1553921 - Is there a utility that would help in writing database logon code?
Finally, don't forget to search this SCN Space. Search box is in the top right corner. I find using short search string is best. E.g.; 'crystal net logon' will return a number of KBAs (notes), wikis, blogs, etc., etc.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

ATI HD3400 in Lenovo T400: xf86-video-ati from testing docking issues

Hi everyone,
I have a Lenovo T400 which I exclusively use with the discrete ATI HD3400 graphics chip because I need the DVI output from my Lenovo Advanced Mini Dock to drive a large display. When I recently updated to xf86-video-ati 6.9.0.91-1 (from testing), everytime I start X and the laptop is in the dock, all that happens is that the whole internal screen shows one full-screen color, cycling white->red->green->blue->grey->vertical black/white gradient->horizontal black/white gradient, and the external DVI display is ignored. The internal display is fine when I start X in the undocked state, until I put it into the dock and enable the DVI-out via xrandr (VGA-out seems to work fine, curiously).
6.9.0-6 (from extra) shows no problems. Pity this happens right now that one can expect more from the open-source drivers due to AMD's publication of the hardware spec...
Has anyone encountered a similar problem or knows where to file a bug most appropriately?
Thanks in advance,
S.

R00KIE wrote:Why don't you try the ATI binary drivers? Sure they aren't what we all would want them to be but at the current time they have support for more things than the open source drivers.
Do they support xrandr 1.2 now for using multiple displays easily? Last time I played around with them (in October) this was still a pain and ugly hacks were necessary to get multi-head to work. Otherwise I would have switched long before.

Steps for Go Live for Webtools moving from Test to Production

Further to the useful checklist in the wiki recently supplied by Bryce can I ask for some minor gaps to be filled ( perhaps by inserting a few additional steps in that document)
I have yet to hit the issues created by a go live implementation but this is only a matter of time...
I am trying to work out what needs to occur between having :
a) a test B1 database successfully synching to a test WT site and db set up
and
b) the Production B1 database initially synched to the the live WT live WT db ready to accept the first live transactions.
1) Copy WT site from test to live location
2) Change Server config, settings and Tables tabs in Synch Manager click on 'Install Plugin' to add custom fields to Production B1 database
3) ......
I am stuck as to what needs to be done to "reset" the WT back end db and how one goes about this.
Coupled with this and probably part of the answer is the 'Initialise Synch' button. It would be useful to understand exactly what this does in terms of data - presumably it is only transactional data - but which tables are affected?
Also if there's anything else that I might have overlooked in terms of potential pitfalls I'd be grateful for advice - the recent posts regarding product trees and images come to mind.
Thanks

First thing is to plan for some downtime in your B1 databases. Nothing more frustrating than having new data come into b1 when you're trying to set this up. So perhaps do this at night or on a weekend when no one is using B1.
Install Plugin operation adds UDF's, edits the stored proc in b1 db, and creates the queue table, PRX_Transaction_Queue
Initialize synch runs upgrade scripts(if applicable), deletes all data that has synched from B1 previously(or would synch from Wt to B1, like a test order created in Wt) and inserts all relevant data into the queue table in B1 db. Also the synchid's are reset. It's pretty much the same list as is displayed on the Settings page of the Synch Manager. Please someone correct me if I'm missing something here!
Pre-requisites:
- Name the Wt db relevant to its position in the environment. B1Webtools is not the greatest name, it's meant to be a jumping off point. Rename your Wt db in the way that you would for B1. ie WebtoolsLive, WebtoolsTest. Makes things easier
Two options:
1) Presuming you have a test Wt db and a test b1 db or even a test Wt db and a production(live) B1 db, you could duplicate the test Wt db and change the synch manager config to point to the B1 live db. Install the "plugin" on the new B1 live db and enter your table mappings. Initialize synch will delete all the data that has synched from B1 test db to Wt db(now live db) and reset the synch id's to zero. These will be populated during the synch. Then Run Synch.
Caveat: This option is fine if your synch takes a "short" period of time. Short being an hour. If you have say 20,000 business partners with 3 years of order history and 300 lines per order... expect several hours.
2) Create a test synch profile and a live synch profile in tandem and update only the live synch profile with data. Also, have two web tools websites but work primarily in the live one. The synch manager will auto synch both profiles every time the service runs(set by you)
When it's go time, copy the live db's over the test db's so you have a test environment exactly matching your live environment. Now, obviously as soon as new data goes into the live db it's out of synch, but this way you have a test system you can break or use to test upgrades, etc.
As you might guess, there are a number of ways to go with this. It really does depend on a) how comfortable you are with moving data around in SQL and b) what your setup entails.
I think the best thing you can do is make it as simple as possible. Don't overthink things and make sure you have a backup of everything before you start.
Good luck!

Transporting an object from testing client to development client

Hi,
             This is Sekhar . My question is
If i transported an object from development client to testing client .After transporting object to testing client i got a bug so that ABAP developer should work on that and how could i modify that bugs in testing client .Is it possible to modify in testing client? Is their any reverse transportation from testing client to development client?
please give me reply for my question.
Thanks & Regards
Sekhar Rao

Hi Ankesh,
You said that
"        If there is a bug then make appropriate changes in DEV and transport the object again.
        Reverse transports are not needed and such paths are not created.   "
I am asking that my object is in TES client and i need it in my DEV client again to make appropriate changes for bugs i got.then what i had to do.
please reply me
Thanks & Regards
Sekhar

Migrate BQY files from Test to Prod.

I have published some reports in workspace manually earlier. But, now i have so many reports which i need to migrate from Test to Prod.
Please suggest the steps, and how to handle the OCE files and Security.
Version is 11.1.2.1
windows 2008 server
Thanks in advance.

You can use LCM utility to migrate to different env's provided they are on same version.
http://docs.oracle.com/cd/E17236_01/epm.1112/epm_lifecycle_management.pdf
Thx

Migrate OAF MDS customizations from TEST to PROD from UNIX

1. Copy the the files of JDEV_USER_HOME/jdevbin to TEST or PROD UNIX mid-tier
jdevbin/jdev/appslibrt/oamdsdt.jar
jdevbin/jdev/lib/mdsdt.jar
jdevbin/mds/lib/mdsrt.jar
jdevbin/BC4J/lib/collections.jar
jdevbin/lib/xmlparserv2.jar
jdevbin/jdev/appslibrt/share.jar
jdevbin/jdev/appslibrt/uix2.jar
jdevbin/jdbc/lib/classes12dms.jar
jdevbin/lib/dms.jar
jdevbin/jdev/appslibrt/oamdsdt.jar
2. environment variable for XMLExporter/XMLImporter:
($PRO_LIB is the path pointing to the jar files)
CLASSPATH=\
$PRO_LIB/jdevbin/jdev/appslibrt/oamdsdt.jar:\
$PRO_LIB/jdevbin/jdev/lib/mdsdt.jar:\
$PRO_LIB/jdevbin/mds/lib/mdsrt.jar:\
$PRO_LIB/jdevbin/BC4J/lib/collections.jar:\
$PRO_LIB/jdevbin/lib/xmlparserv2.jar:\
$PRO_LIB/jdevbin/jdev/appslibrt/share.jar:\
$PRO_LIB/jdevbin/jdev/appslibrt/uix2.jar:\
$PRO_LIB/jdevbin/jdbc/lib/classes12dms.jar:\
$PRO_LIB/jdevbin/lib/dms.jar:\
$PRO_LIB/jdevbin/jdev/appslibrt/oamdsdt.jar
3. for -mmddir needed in XMLExporter/XMLImporter:
copy the following files of JDEV_USER_HOME\myhtml\OA_HTML\jrad to TEST or PROD UNIX mid-tier
JRADElementList.xml
OAElementList.xml
UIXElementList.xml
4. Write a Unix shell script to export from TEST and import to PROD. (You may register it in Oracle apps to let the developers to promote it themselves using the assigned responsibility)
Notice:
1. Oracle puts OAF customization together with Oracle seeded customizations. It's impossible to tell them apart just from the OAF MDS document names.
2. Using responsibility_id in the document name to get the application_id from the apps table, you'll get an different application_id than the application_id in the document name.
3. The function_id in the document name is not consistent with the function_id in the apps table. The function_id in apps table has null value.

You may also use a PC to migrate OAF MDS from TEST to PROD. Instead of running an Unix script on the TEST or PROD mid-tier, you may write a batch file and run it on your PC.

How do i recompile whole system with glibc and gcc from test

I always run testing and hence upgraded all my system a couple of days back. How ever one pprogram i use very often, BLENDER isn't working after i upgraded glibc and gcc4. I have recompiled it but when I get all this errors when i start it http://bbs.archlinux.org/viewtopic.php?t=21825.
I think i need to rcompile all its dependant programs with new glibc and gcc from testing also. Problem is I dentifying which programs to compile is proving a pain as the dependant programs also depend on other programs etc...
Is there a way to recompile my whole system without having to do it one by one?

if you want to compile everything, gentoo is an option. But abs is excellent too.
P.S. Gentoo's compilation drove me out of it

How can I pass a variable from Test Stand to CVI by reference

Hi!
I can't to pass numeric or boolean variable from Test Stand (for example: FileGlobals.StopFlag) into the step (CVI function).
Function prototype:
void __declspec(dllexport) __cdecl PC2_WaitWhileResponceAppear(tTestData *testData, tTestError *testError, int *iStopFlag).
When variable has bin changed I can't see this change from my function.
CVI 2010, Test Stand 2010
Can anybody help me?

Hey Rombar,
It is certainly possible to pass variables by reference; for example, if you go to <TestStand Directory>/Examples/Demo/C and open the computer.seq file, you can see one of the example sequences that uses CVI modules. If you click on one of these steps, you'll see that some of the parameters, such as the error information, is passed with pointers. This is a pass by reference.
To help narrow this down, it'd be good for us to figure out a few things about how the code is run. First, if you go to Configure > Adapters, select the CVI adapter and choose Configure, you can see options for this adapter. Do you have it configured to run in an external instance of CVI or as an in-process call?
Also, if you're wanting to see a change made in TestStand in your external code, this makes me think that you're wanting to run the code and then continue to execute your TestStand sequence while the code runs. How did you configure this behavior? For example, are you calling this code as a separate sequence in a new thread, or are you using another method to run this code while the sequence continues to run?
Finally, if we could see a screenshot of how you're configuring the parameters on the TestStand step, that might be helpful as well.
Daniel E.
TestStand Product Support Engineer
National Instruments

X + XFCE using a lot of RAM (Xorg 7.3 from testing)

First off, I didn't know where to put it, so feel free to move it.
I recently got a new laptop - HP 6510b (T7300, 2 GB RAM, X3100 onboard Intel GPU). Installed Arch on it, like on my other boxen. However, memory usage jumps through the roof once i run XFCE. I grabbed Xorg 7.3 from testing since that one has the Intel driver (xf86-video-intel) for my GPU.
Some stats:
Memory usage in runlevel 3:
total used free shared buffers cached
Mem: 2019 48 1970 0 4 19
-/+ buffers/cache: 25 1993
Swap: 282 0 282
Memory usage in runlevel 5 (logged in to XFCE, empty desktop, except for aDesklets and Conky):
total used free shared buffers cached
Mem: 2019 190 1828 0 7 53
-/+ buffers/cache: 129 1890
Swap: 282 0 282
Usually I boot into XFCE using 60 MB RAM with a similar configuration (even heavier, since I haven't got all the services running yet as I do normally - CUPS etc.). Now, that is obviously not the case. As mentioned above I have 2 GB of RAM, of which the onboard GPU should take max. 256 MB. Free does not seem to show that if I am correct (on my old laptop I could see 800+ MB of RAM, because 128 MB was reserved for the ATi GPU). Is this normal?
If I run htop and sort on memory usage I see X + XFCE using more memory than usual (60 MB total, without aDesklets & Conky). Normally the graphical layer only adds like 40 MB more (if not less, since it used to be 60 MB).
This is a screenshot of the memory-sorted active applications
Does anyone have any pointers, or experience similar behaviour with Xorg 7.3?
Last edited by B (2007-09-16 18:28:57)

I was just wondering where the big difference came from. If it has to do with the inner workings of the driver, I'm afraid I can't do anything about then. I know I got plenty of RAM, I'm just a bit obsessed with stuff lingering around for nothing (bloat, you know ), and I suspected that might be the case here, which is not so, apparently .
Shining: I used to think one of the great advantages of Linux was that, with a slim environment, it could be very light on resources (especially RAM). At this moment the difference with a stripped XP is not that big anymore . Memory usage on an onboard ATi GPU, 1280x800, 16bit was 60 MB. I suppose that was with 24 bit colour depth too (it was not set explicitly in Xorg.conf but after defining it & restarting X RAM usage was the same).
I'd like to point out also there is nowhere in the BIOS i can set the amount of memory allocated to the X3100. It can have up to 384 MB according to Intel's docs, but I still got the full 2 GB RAM according to free. And the GPU has to get his memory in some way...
Last edited by B (2007-09-17 15:51:30)

How to apply PO template from test database to live database?

I have created a PO template in my test database and I want to apply to the live database. Is any way to accomplish this task? i.e. any import or export method between different database? (Test environment or live environment?)

First go to your TEST database. Open your PO template in the design mode.
Go to Print Layout Designer menu --> Display document properties --> General tab and copy the document ID (example: POR200....)
Please Note:
LIVE = [Your LIVE DB NAME] and
TEST = [Your TEST DB NAME]
USING SQL
INSERT INTO [LIVE].[dbo].[RDOC]
SELECT * FROM [TEST ].[dbo].[RDOC] WHERE [TEST ].[dbo].[RDOC].DOCCODE = 'POR20...'   -
(document ID copied above)
INSERT INTO [LIVE].[dbo].[RITM]
SELECT [TEST].[dbo].[RITM].* FROM [TEST].[dbo].[RITM]
WHERE [TEST].[dbo].[RITM].DocCode = 'POR20...'   -
(document ID copied above)
This should work.
Best Wishes

Transfer data from Test to Production Server

Dear All
I want to know how to transfer data from test server to production server.
Lets say we have done all the setup steps of GL, and we have also feeded chart of accounts, journal entries, recurring etc. at our test server. Now we want to shift our data from Test Server to Production Server.
What can be the procedure?
I shall be really thankful.
Best Regards
Muhammad Habib
http://mhabib.wordpress.com

Dear hsawwan
Thanks for your reply. Can you send me this document via email. My email id is: [email protected]
Secondly can you please tell me how to just transfer my Chart of Account.
I shall be really thankful to you.
Best Regards
Muhammad Habib

How to migrate custom user attributes (UDF) from test environment to production when a sandbox is published

Hi all,
I like to migrate custom attributes from test environment to my production environment. I read OIM documentation and i tried to fallow these steps but I cannot export sandbox and import it because all sandboxes are published in the test environment.
I exported and imported users metadata by deployment manager only. Now, all migrated attributes are in the OIM DB but I do not see these attributes in Administration Console.
How can i solve this issue? Is it possible to export published sandbox and import it in the other environment?
Thank you.
Milan

In OIM 11g R2 you need to export sandbox before publishing sandbox for custom user fields from DEV or TEST environment.
Then import exported sandbox in the another environment.
If you didn't exported custom user fields sandbox from your TEST or DEV in that case you need to create those again in another environment manually. There is no other option for this in OIM 11g R2.

Kernel26-2.6.21 from testing

Similar Messages

Maybe you are looking for