Key data to multiple images

I feel there must be a way to put the same data to multiple/batch images. e.g. code a batch of images yellow or put the same keywords. Help would be very much appreciated. Thanks, jp.

There are several ways to this:
If you select several images at once in the Browser and use the Metadata Menu from the Aperture Applications menu "Metadata -> Label", "Metadata -> Assign Keywords", "Metadata -> Rating", ... these changes will be applied to all currently selected images at once. You don't actually have to use the menu, the corresponding keyboard shortcuts will work the same.
If you want to change some other metadata tags - title, caption for multiple images, etc, again select the images all at one and use "Metadata -> Batch Change". Select a suitable Metadata preset in the "Add Metadata from" selector and define the values you want to add to all selected image - you can choose if you want to append the new values to the old values or to replace the old values.
An elegant way to change several images at once is to edit one image and to copy these values to a set of several currently selected images. For this use the "Lift&Stamp" tool:
Select the image you want to copy the settings from and then use "Metadata -> Lift Metadata" (or use the "Lift Metadata Button" (the badge withe the up arrow)
In the Lift Metadata HUD deselect any tags and adjustments you do not want to stamp.
Select the images you want to stamp the metadata tags to and stamp using "Metadata -> Stamp Metadata" (or use the "Stamp Metadata Button" (the badge withe the down arrow)
Regards
Léonie

Similar Messages

Aperture cannot add GPS data to multiple images at the same time

I am new to Aperture and have been using it for a week or so now. Today I tried to add GPS data to a number of images and found out, it appears Aperture can only add GPS data to one image at the time. When I select multiple images to add the GPS data to, it just doesn't do anything. It leaves the GPS data blank.
Here is what I do:
From the Info-tab I select "GPS" from the drop down menu
At the bottom of the info tab I show the map
In the map's search box I enter the location I want to assign to the photo(s)
From the resulting drop down menu I select the locatiion I want and press the "assign to location" button
As long as I choose only a single image, this works fine and the GPS Data is added. Not so when I select more than a single image. After pressing the "assign to location" button it seems as if the GPS data is added (there is no message indicating otherwise), but the GPS data in the selected images is blank.
What am I doing wrong ?
Additional info
I have been testing this a bit more and the behavior is even more strange: When you select multiple images in Aperture, they get a thin white border, except the one that you touch last (normally the last image of the selection) that will have a thicker border around it. It appears that, when selecting multiple images, the GPS data is ONLY assigned to the photo in the selected setthat has the thicker border (?????)
Message was edited by: dinky2

Rereading your post, I think the problem is, that you are assigning the location from the Info panel and not from the Metadata menu. The Info panel and the Metadata menu ar behaving differently.
The Info panel will always only affect the primary selection, but the Metadata menu will work on all selected images (unless "Primary only" is checked). So , if you want to assign your location to multiple images, use "Metadata > Assign location" instead of the little map in the "Info" panel.
Or use the "Places" view. Then you can drag all images at once to the same pin on the map.
Regards
Léonie

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

BDB- Recno multiple key/data pairs retrieval

Hey,
I am new to BDB and have just started to work with Berkley DB (ver. 5.3.15) using the Linux C API.
I set up a simple Recno DB which is populated with sequential keys 1,2,3….100. DB Records are in variable length size, although, I am limiting them to a max size.
Below are the environment and DB open flags I am using:
dbenv->open(dbenv, DB_HOME_DIR, DB_SYSTEM_MEM | DB_INIT_LOCK | DB_CREATE | DB_INIT_MPOOL, 0)
dbp->open(dbp, NULL, NULL,DATABASE_NAME, DB_RECNO, DB_CREATE, 0664))
Single record get/put or using cursor to iterate over the all DB works well.
However, I would like to retrieve multiple records in a single get call.
These records can be non-sequential.
For example, retrieving 3 records with the keys 4,89,90. I prefer the bulk buffer to be as minimal as possible (avoiding stack or heap unnecessary memory allocation).
I was reading and saw few examples about using bulk retrieval. Though, I couldn’t find any example for racno bulk get on multiple specified keys.
From what I figured out till now, it seems that I should use:
Get flags: DB_SET_RECNO, DB_MULTIPLE_KEY. And the macros: DB_MULTIPLE_INIT and DB_MULTIPLE_RECNO_NEXT to iterate over a bulk buffer received.
But, I couldn’t figure it out where and how I should specify the list of Keys.
Beside, the BDB man says: "For DB_SET_RECNO to be specified, the underlying database must be of type Btree, and it must have been created with the DB_RECNUM flag."
Does the BDB open with DB_RECNO flag imply that the underlying database is Btree? If creating Btree instead of recno, wouldn’t I loss access performances?
I would appreciate if anyone could supply some guidelines or an example which will assist me to figure it out how to retrieve multiple key/data pairs from a recno DB.
Thanks in advance
Kimel

I am checking the BDB to see if it can suit my needs (mostly performance wise).
It should work on a simple home router device and should hold router runtime information (static/dynamic).
This information should be accessible for process in the system which can write or read the device info.
The DB is not require to be persistent and is recreated every reboot (memory only).
I believe the DB will hold not more then 200 parameters at max.
DB access rate is around 30 records per sec (write/read)...
Currently, I think of either BDB or maybe just use a normal Linux shared memory (random access + semaphore).
Cons and pros to each...
If I choose BDB, I will use the in memory DB and recno due to access performance considerations.
Getting back to my question, I would like to be able to read a list of parameters in a single get call.
In order to use recno, I will give every parameter a unique id (1 - ip, 2 - subnet , 3 - default gateway).
e.g: ip , subnet , default gateway. (get keys 1,2,3)
Hope you have the relevant info.
Thanks

Multiple Image Upload removes IPTC APP13 Data?

I recently updatet the Multiple Image Upload because of the Flash Upload Problems. This is working now. But now after uploading an image the $info['APP13'] IPTC data disappears.
This is a major problem for me, because I use this data on a photographer website. Has anyone experienced this problem?

Do you have a question?
You didn't ask one in either of your posts.

Adjust date/time for multiple images

Wonder if anyone else is having this problem (some posts seem similar but not exactly the same)
1. Clean library (mix of DNG, JPEG and TIFF files)
2. Need to change dates to match other images in the project
3. Selected multiple images and used Metadata -> Adjust Date/Time
4. "Lead" image (bright white box) date and time adjusted accordingly but other images in the selection date have their capture date and time generated apparently randomly (I'm trying to set 08/01/2008 but I'm getting anything from 27/03/1982 to 24/12/2010!)
5. The dates do appear random - repeating the process will lead to different dates in the IPTC field
6. I've clean installed everything - drive format, OSX10.6.2, Aperture 3 - and rebuilt the library. The problem remains unchanged!
Any ideas?
Cheers,
Adrian

I'd actually looked at this before attempting the metadata adjustment but checked it again just now to ensure I wasn't missing anything.
I guess if it's a shift based on the relative differences in the date of the imaes selected then that could explain the apparent random variations I'm getting. Although this would certainly be useful for the time stamp, when I'm trying to ensure all images in a project have the same date, relative changes certainly aren't!
I'd have to run it again tonight to confirm by comparing before/after adjustment dates. If that's what going on I think I'll have to get Adobe Bridge to do the heavy lifting for me..... just a shame I have to drag in another app rather than doing everything inside Aperture.

Spry data set and html table with multiple images

I use "Spry Data Set" in my Dreamweaver CS4 site. I need to make one html file (a product page) and all the product data comes from a separate html table.
So, I have a html table that contains the product data and the images. Each row is one product.
Column 1 contains a product name
Column 2 contains product information
Column 3 contains products thumbnail image 1
Column 4 contains products thumbnail image 2
Column 5 contains products large image 1
Column 6 contains products large image 2
This a simple example of the idea. In reality, there is lot more content.
So the actual question is that:
How can I show in the product page all the thumbnail images, but only one large picture at a time?
And when the thumbnail is clicked the large picture changes accordingly.

It depend entirely on what you want.
One way would be to show a shadow box as per http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=shadowbox&search_exchange=&num =25&startnum=1&event=search&sort=0&interim_dummy_tmpfield=&Submit= or http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=lightbox&search_exchange=&sear ch_license=&search_rating=&search_pubdate=&Submit=Search&num=10&startnum=1&event=search&so rt=0&dummy_tmpfield=
Another way is to have a master/detail area where the large image appears after clicking in the master area like this http://labs.adobe.com/technologies/spry/demos/products/index.html
You could also use tooltips as in http://labs.adobe.com/technologies/spry/samples/data_region/TooltipwithData.html.
There are many more ways, but you need to make the desicion based on the layout of your page.
Gramps

Multiple Image upload with save to database

Hi everyone,
I wonder whether anyone can help me, I have been trying to use the multiple image upload with save to database wizard. When I create the page and upload it and then view it in Safari the only thing that is on the page is an upload button. When I press the upload button I am able to browse my files and select them. When this window closes a flash loading value is shown but no images have been uploaded.
Am I missing anything? I have had no problems uploading single files and creating albums. I want to create an online gallery so that I can do a multiple upload to a specific album if this is possible.
Cheers
Sarah

Hi Sarah,
>>
but only the filename appeared in the database and no other information was stored.
>>
that´s how it´s been designed also in the "single upload" -- the path_to_the_folder where the files sit in have to be determined elsewhere
>>
{wedimg_idalb}
>>
I don´t see any reference to this "dynamic data" placeholder in any of your table columns you posted -- where does this one come from ?
>>
1. I have multiple clients and each client has their own set of images.
2. Each set of client images must be linked to an album via the album ID
>>
do you have any "foreign key" which is related to the user_table´s ID in order to make user ID 2 upload his images in album ID 2 ? How will the upload page "know" where the images are going to be uploaded to ?
>>
and the album page, wedding_alb
>>
to my mind *this* table would itself need a foreign key to the user_table in order to "map" record 2 to user ID 2 -- or do I miss something ?
Günter Schenk
Adobe Community Expert, Dreamweaver

LR2 - multiple image exif doesn't work, in Grid View

In Grid View, I need to place the same information in EXIF Label and Caption fields in multiple selected images. It doesn't matter if I select them all first and then type the information, or enter it into one image, select the others, and then paste the information. Only 1 image will accept the information at a time. I have to cut and paste the info into each image individually.
(I know I posted this question earlier, but it seems to have gotten lost after one response that did not solve the problem, sorry....)
bill

To start off, you can't change any EXIF data using the metadata panel in LR. All the EXIF fields are "read-only".
You didn't indicate your OS, but here's the procedure on the Mac version (I think it's indentical on Windows):
Be sure you are in grid mode in the library (the G shortcut key).
Select the images to be changed.
Enter the info in the caption field in the metadata panel on the right, and press enter.
How exactly are you doing it?

How do I upload multiple images to d-base through a single page?

I can upload a single image with a form to my MySql database with no problem. It sends the file name to the database then stores the image in an image file.
But now I want to upload multiple images in the same way from the same PHP page. Each multiple upload needs to be stored to a single record (designated user that's logged in). I have a field for each image in the database.
This may give you a better idea of what the database looks like:
Username
ID
image1
image2
image3
scmeeker
5
dotty.jpg
hello.jpg
kitty.jpg
jdmeeker
7
So now I want to upload multiple images for each image field. When it works correctly, it should send the name of the image file to the proper field and then send the image to the image folder. I've tried it several ways with no luck at all.
Any one have any ideas???
Thanks!

I think you would be better off having two tables in you database. One would be a users table that has all of the user data including a user id (the primary key for this table and the foreign key for the other table). The second would be an images table. You would use the images table to upload infinite (well, as many as the db can handle) images. The trick, is that each record in the images table would have a foreign key, which would be the user id for the user that uploaded the image.
This way your users wouldn't be limited to three images but could upload as many as you want to allow them to. The association of the user id, which has to be unique to each record in the users table (there cannot be duplicates, it should be your primary key on the users table), to the user id in any number of records in the images table is what will allow this to work.
EX:
The users table
user_id
f_name
l_name
email
other_info
100001
first
last
[email protected]
100002
f_name
l_name
[email protected]
The images table
image_id
src
user_id
10000000001
/db_imgs/img1.jpg
100001
10000000002
/db_imgs/img2.jpg
100001
10000000003
/db_imgs/img3.jpg
100002
10000000004
/db_imgs/img4.jpg
100001
10000000005
/db_imgs/img5.jpg
100001

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

Key data to multiple images

Similar Messages

Maybe you are looking for