Key Size error

Hello All,
I am using jdk1.4
I am getting KeySize error for RSA KeySize 1024
for that i have created .java.policy file and putted into USERHOME
contents of file are
grant {
// There is no restriction to any algorithms.
permission javax.crypto.CryptoAllPermission;
Also i have installed Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files
Still i am getting the errors for KeySize...
Thanks

Was there ever solution found for this problem?
As per note: 419887.1
It states following:
=========================================================
Message: Bad Key Size: 30
Stack: java.lang.IllegalArgumentException: Bad Key Size: 30
then the following is applicable :
1) download jdbc drivers 10.1.0.5 from
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc101040.html
2) apply the drivers downloaded above to the following directory:
<JDEV HOME>\jdbc\lib
You will find in this directory the files that needs to be downloaded.
==========================================================
I have done the above but I am still getting the error. I have gone into Project Setting and created an Oracle JDBC 1.4 variable and pointed the ojdbc14.jar to that variable. I then added that variable to the class settings. Is there something else I am missing here?
Note: I downloaded ojdbc14.jar because the compiler is at 1.4 for my jdeveloper 10.1.2 as per note 419887.1. Should I be using another jdbc classs jar?

Similar Messages

Maximum WPA2 key size for Apple TV (gen 2 & 3)

Does anyone know the maximum key size for WPA2? I am using a Airport Extreme with a key size of 63 characters and the Apple TV doesn't seem to accept it. Before I reconfigure the whole network, I would like to know the max key size versus trial and error (kind of a pain to use the remote to input the characters).

Ok.. in order to help other users i will post this..
I have resolved the issue... it was rather simple and dumb...
I never use windows media player ever.. i do not like it and can not stand it.. because in my case it was a brand new windows installation this fix will only apply to certain users..
because it was a brand new windows installation.. i had never clicked on windows media player.. apparently streaming settings are embedded into windows media player for the windows 7 OS... in past installations that i have used for years.. i simply never ever clicked on windows media player, as i never had a reason to.. i use itunes for my ipad, iphone etc.. etc...
by accident and shear luck i decided to click on windows media player.. and of course go through the express settings.... after i did this all of my streaming problems to my apple tv gen2 disapeared... HD movies now start almost instantly... so as i stated above apparently there are media streaming settings embedded into the OS through windows media player... doesnt make any sense to me as i never use the program.. but whatever that fixed my issue..
so for any of you windows 7 people out there using a windows 7 pc as your itunes sync computer and using that itunes library to stream to your apple tv... make sure you have done the initial setup at min.. of windows media player.. i still left itunes as my default player.... everything now works flawlessly... infact for whatever reason.. even in an HD movie my network almost has half the movie synced now accross the bar before the movie starts so now my apple tv is blazing fast....
i have been struggling with this for 2 days now and simply never gave it a thought that windows media player would ever have anything to do with itunes streaming a totally seperate program.. but it did..
i hope this helps other people with similar problems.
good luck

Java.security.InvalidKeyException: Illegal key size

Hi,
I have developed an adf application using jdeveloper 11g which hosts weblogic 10.3.3.0.
My adf application has to connect to an external application for credit card validation.
To achieve this i am using a HTTPURLConnection and passing the external address and attributes that has to be written to it.
The external application which i am trying to connect is secured starts with https://..
I get an error as soon i am trying to open the "connection.getOutputStream()".
Following is the error i am getting
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
java.security.InvalidKeyException: Illegal key size
     at javax.crypto.Cipher.a(DashoA13*..)
     at javax.crypto.Cipher.init(DashoA13*..)
     at javax.crypto.Cipher.init(DashoA13*..)
     at com.certicom.tls.provider.Cipher.init(Unknown Source)
     at com.certicom.tls.ciphersuite.SecurityParameters.createWriteCipher(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.changeCipherSpec(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedCertificate.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:66)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:124)The code i am using to connect to the external website is as follows.
    URL url;
    HttpURLConnection connection = null;
    try {
      //Create connection
      url = new URL(targetURL);
      connection = (HttpURLConnection)url.openConnection();
      connection.setRequestMethod("POST");
      connection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
     connection.setRequestProperty("Content-Length", "" + Integer.toString(urlParameters.getBytes().length));
      connection.setRequestProperty("Content-Language", "en-US");
      connection.setUseCaches (false);
       connection.setDoOutput(true);
       DataOutputStream wr = new DataOutputStream (
           connection.getOutputStream ());
            wr.writeBytes (urlParameters);
            wr.flush ();
      wr.close ();
            //Get Response
      InputStream is = connection.getInputStream();
      System.out.println("after getting input stream");
    BufferedReader rd = new BufferedReader(new InputStreamReader(is));
      System.out.println("after BUffered reader");
    String line;
    StringBuffer response = new StringBuffer();
      System.out.println("after String buffer");
    while((line = rd.readLine()) != null) {
      response.append(line);
      response.append('\r');
      }      rd.close();
    return response.toString();
    } catch (Exception e) {
      e.printStackTrace();
      return null;
      } finally {
      if(connection != null) {
        connection.disconnect();
    }I am currently totally clueless , i dont understand what steps should i take. Is this error due to some keystore stuff??
I even tried to replace the policy files in jre as per some blogs but it still does not work.
I have very limited knowledge of the security issues with weblogic , i will really appreciate if i can get any links or any help in this matter.
Thanks in advance
ash

The messages prior to the exception are very significant:
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 8, 2010 10:32:54 AM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
java.security.InvalidKeyException: Illegal key size
So there are at least 4 certificates in your server's truststore that are causing issues.
Is your weblogic server using CustomIdentityAndStandardTrust? If so, the the keystore is the $JAVA_HOME/jre/lib/security/cacerts
You should familiarize yourself with keytool ( in $JAVA_HOME/bin ) and consider removing entries from your trust store unless you absolutely need them and are willing to trust any cert signed by them. There's been a thread about some newer Certificate Authorities ( CAs ) that were included as part of a recent java upgrade which have caused similar "unknown OID" issues.
For your specific endpoint, you can use your browser to invoke the services' wsdl; this will cause your browser to fetch the certificate from that server
You can then see what CA is used to sign it. Then see whether that CA is in your truststore.
There is also a thread with a very simple class to test the SSL handshake:
Re: Use Server Cert in Managed server not working

Need to change CSR key size from 1024 to 2048

Hello SAP experts,
I am encountering an error when generating new certificates:
· Invalid Key Size
Current Key Size: 1024
The key size in the provided CSR is not valid. The key size must be at
least 2048. Please attempt the request again. If the problem persists
contact Entrust Certificate Services support for assistance.
The CSR was generated using Visual Admin -> Server_Name -> Services ->
Key Storage -> ServiceSSL -> Generate CSR
For ABAP systems, I know that the following parameters can control the
key size/length:
sec/dsakeylengthdefault
sec/rsakeylengthdefault
Are these parameters applicable to a pure Java stack system?
How can the CSR key size be changed from 1024 to 2048?
System: GRC Production
Installation: NW Installation for GRC
System Type: Production system
Product Version: SAP GRC RISK MANAGEMENT 2.0
Operating System: AIX 5.3
Database: ORACLE
Technical Usage Type: Application Server Java
Thanks in advance!
Regards,
Kris Caldoza

See knowledgebase article [1548872|http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1548872]
Cheers, Uwe

Java.sql.SQLException: Exceding key size

Hi Guys,
My developers are getting the following error message in their application logs. Noone knows what is wrong. They are using JDBC 2.0 and JRE 1.3.0_02.
Someone please let me know where to look for troubleshooting.
[2004-02-13 17:28:54,863][][ERROR][Thread-0][util.AOSSessionHandler] - getConnection()
java.sql.SQLException: Exceding key size
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:411)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:255)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:166)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:93)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:146)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.wc.util.AOSSessionHandler.getConnection(AOSSessionHandler.java:74)
at com.wc.util.AOSSessionHandler.removeExpiredSessions(AOSSessionHandler.java:99)
at com.wc.util.AOSSessionHandler.run(AOSSessionHandler.java:212)
**************************************************

Hi,
DB version is 9.2.0.3 and We are using JDBC 2.0 on the application server with JDK 1.3.0_02. Application server has oracle 9i client with Classes12.zip timestamped as April 26, 2002 (Size = 1207068 bytes).
Thanx

AES supported key sizes!

Hi all,
is there any function that specifies key size "secret key" used in AES cryptographic algorithm? if not which key size is supported?
thanks alot.

Hi again,
i ve tried what you have told me but it gave me error ERROR: java.security.InvalidKeyException: Illegal key size or default parameters
here is the code
SecureRandom sprng = SecureRandom.getInstance("SHA1PRNG");
            KeyGenerator key = KeyGenerator.getInstance("AES");
            //key.init(sprng);
            key.init(192, sprng);
            SecretKey encKey = key.generateKey();
            symmetricKey=encKey;
            Cipher encAES = Cipher.getInstance("AES");
            encAES.init(Cipher.ENCRYPT_MODE, encKey);
            encMsg=encAES.doFinal(message.getBytes());can any body help me plz!

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

Failed to set security on SQL Server registry key. Error: 2

Hi,
I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
SCCM02 – SUP, MP, FSP, SLP
The SQL2005 on SCCM01 is running under a domain service account called
domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
In an effort to resolve the isse I have made this account a Domain Admin.
I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
This is where I get problems.
I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
Failed to set security on SQL Server registry key. Error: 2.
<11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
<11-09-2010 22:46:59> Successfully set security on Setup registry key.
<11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
<11-09-2010 22:46:59> Successfully set security on Identification registry key.
<11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
<11-09-2010 22:46:59> Installing SMS Site Component Manager ...
<11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
Configuration Manager\bin\i386\sitecomp.exe>
<11-09-2010 22:47:01> Started Site Component Manager service
<11-09-2010 22:47:01> SMS Site Component Manager installation completed.
<11-09-2010 22:47:01> Done with service installation
Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
WebDav and win2008 roles, features all added and server fully patched.
Despooler.log on SCCM01 seems good and passing keys.
Tried installing to default path and to shortened path such as C:\SCCM
The new secondary site is listed in the console and an address can be added for the Secondary Site
BITS Server Extensions and Remote Differential Compression Features are enabled.
The Group memberships all appear ok:-
SCCM01
Local Admins
contains the sec site server SEC01, SCCM01, installation accounts
SMS_SiteToSiteConnection_001
SEC01 (the sec site server)
SMS_SiteSystemToSiteServerConnection_001
SCCM02
SEC01
No Local Admins as a DC
SMS_SiteToSiteConnection_002
SCCM01
SMS_SiteSystemToSiteServerConnection_002
empty
SQL 2005
This has the account logged in during installation as a sysadmin
SCCM02 is also sysadmin
The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
therefore the installation cannot complete.
I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
Not sure if the fact that SEC01 is a DC may be a factor.
Appreciate any help if anyone has seen this before or can suggest a resolution.
Thanks

After a lot of digging around and head scratching I eventually found the resolution.
The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
let the SQL side of the SCCM install complete a s these were not being created automatically.
This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
never install.
The big clue was eventually contained in the mpfdm.log errors relating to
**ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
and
**ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
Thankfully the errors led me to these two blogs:
http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
and
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
Solutions
Add the following reg keys to each of your effected secondary sites.
Inbox Fix
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
"Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
"SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box"
Asset Intelligence fix:
Note: you will need to identify the next largest key value.
In my example it was key 49
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
"Inbox Name"="Asset Intelligence KB Manager"
"Relative Path"="inboxes\\AIKbMgr.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
AMT registry Fix.
  Note: you will need to identify the next largest key value.
In my example it was key 50
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
"Inbox Name"="SMS_AMT_PROXY_COMPONENT"
"Relative Path"="inboxes\\amtproxy.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
Big thanks to Shaun Cassells and John Marcum for these blogs

HP B8850 Page Size Error Printing from Aperture 2 (or iPhoto)

I am trying to print on 13x19 (B+) size paper to an HP Photosmart Pro B8850 printer. I get this error when printing from Aperture --> "Page Size Error: Paper size selected in the print driver does not match the paper loaded in the printer IN tray."
Aperture 2.1.2
Mac OS X 10.5.6
HP Photosmart Pro B8800 Series Print Driver 2.3.1
I can set the paper size to 13x19 (B+) in the Aperture print dialog, but under the Print Settings button there is no option for paper size, only paper type. So apparently the size that the printer is expecting in the driver does not match the 13x19 that is loaded in the printer. I was able to verify this by leaving all print settings for 13x19 and loading an 8.5 x 11 sheet in the printer. It pulled the paper through and started printing, but the print was scaled to fit onto the 8.5 x 11!
So in other words, the way I'm seeing it, even though I am setting the paper size for 13x19 in Aperture's print dialog, the printer thinks it's suppose to print on 8.5 x 11.
To make matters worse, there is no Page Setup menu item in Aperture to set the paper size in the print driver directly. I would have assumed that the Aperture print dialog was "smart enough" to pass the page size parameter to the HP printer driver, but that is apparently not happening.
I spoke with HP tech support and they were surprisingly helpful. With their help I was able to print on 13x19 paper with HP's bundled software package, but I had to export my file from Aperture and import it into HP's software. Now that's a good first step which assured me there is nothing wrong with the printer itself, but obviously I purchased Aperture to use it's more elegant and supposedly streamlined interface to make my prints.
Has anyone had a similar problem? Any solutions? Suggestions? I have searched this forum, HP's support forum, DP Review, Google and not finding much. I can't believe I'm the only guy trying to print on 13 x 19 from Aperture using this printer. I suspect it's not printer specific though. Could be my system I guess. I plan on calling Apple Care depending on what type of response I get here.

I don't know if this may help, but recently we had a discussion about problems with Aperture's custom paper size not working correctly:
The solution was to define a paper size outside Aperture:
In any application, for example Preview, try to print something and the print dialog comes up. At this point click on Paper size and choose Manage Custom Sizes. You can define a new paper size here. This new custom size will then appear when you go to Aperture print dialog under paper size. It solved my problems with custom paper sizes here, for some reason (a bug?) defining a custom paper size within Aperture itself did not work correctly for me.

How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error

How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.

Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

EMac optical drive: Reads but ceased writing. I get "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR. Drive is Pioneer DVD-RW DVR-127D.

eMac optical drive: reads fine but has ceased writing. One day it's working fine, burning DVDs, then after repeated attempts stops copying and gives the following error message: "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR". Drive is Pioneer DVD-RW DVR-127D. Is this a software issue or is the drive half dead? Get the same result with either Popcorn or Toast 10.

Are you using Roxio Toast? That error seems to be discussed a lot in the Roxio forums. Scroll down this thread:
http://forums.support.roxio.com/topic/1686-the-drive-reported-an-error-sense-key medium-error-etc/
and you'll find a step-by-step troubleshooting scheme.

I have a MacBook Pro, Matshita UJ-857E while recording music my drive reported an error: Sense Key=HARDWARE ERROR Sense Code=0x03,0x01 I have no idea what this means, and now my cd burner/player won't work. can someone help me fix this problem?

Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?

tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens.

Change default key size on non Domain joined CA.

Hello,
I have one standalone non domain joined CA I would like to change the default key size of all issued certs to 2048. Since it is a stand along, there are no AD template to modify. Can this be changed in the registry?
Shawn

CAPolicy.inf is the way to go.
See the following thread
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ce001d8f-c722-4429-83cb-328b92876292/how-to-change-root-certificate-keys-length-and-validity-period?forum=winserversecurity
Hth, Anders Janson Enfo Zipper

Mirrored RAID: MediaKit reports block size error

I am trying to create a 2nd set up backup drives for my photos. I have two new iomega 2TB drives, which look essentially identical to drives I'm currently using as my primary backups as a mirrored RAID set.
I can start the process with freshly erased and reformatted drives (with the default mac format, extended, journaled, unencrypted, not case-sensitive). And after a minute or three, I see
"MediaKit reports block size error, usually caused by not being a multiple of 512."
The RAID options are Mirrored RAID, Mac extended journaled, and options settings are default.
I see several series of posts with complaints about encrypting RAIDs and disk block sizes, but not unencrypted errors. I actually started out trying to do this with the 2006 MBP running 10.6.8 and got a different error: "POSIX reports: the operation couldn't be completed. Operation not permitted." I wasn't sure whether the 2TB RAID I already have was set up iwth the older or newer computer--it was definitely before I put Lion on this one--so I tried this one and now have a different error.
Any idea what the problem might be?

Update: I spent some time on the phone with an Apple support RAID expert, and couldn't figure out what the error was; we couldn't bypass it by playing with partitions on the drives, or any of another couple of manuevers that I've already forgotten. He noted that his own searches were showing a lot of mentions of similar problems but only with Iomega drives, and he was finding the same links I found earlier about problems creating encrypted drives. Now trying to decide if it's worth throwing more good money after bad for a call with Iomega support, and waiting to see if the iomega forum is at all helpful.

Incompatible image size error

Hi,
I had a program that was working, and then made a copy of it to make some changes. The main change was to be able to put a BCG correction on the subtracted image. Now for some strange reason I get an Incompatible image size error. Can anyone help - also, if you could give me a suggestion soon that would be helpful as I have a deadline coming soon.
I suspect that I'm missing something obvious, but can't work out what it is.
Thanks for your help
Sam Whitehead
Attachments:
error.jpg ‏23 KB

Hi casualfanta,
I understand that you are using I-16 type greyscale images, but your screen capture does not include the BCG part. I am assuming you are using the IMAQ ColorBCGLookup VI even though you don't need colour, because the input for the IMAQ BCGLookup (no colour) is of U8 type.
If you are already using IMAQ ColorBCGLookup, then try using the IMAQ Cast Image VI to force a U32 type input and hopefully that'll solve the issue. Let me know if that helps!
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Key Size error

Similar Messages

Maybe you are looking for