Key Values Mismatch

Hello again,
I screwed up and I don't know how to fix it. Trying to start Apache:
/etc/init.d/apache2 start
tail /var/log/apache/error_log shows:
[Tue Feb 15 08:21:40 2011] [notice] suEXEC mechanism enabled (wrapper: /
usr/sbin/suexec2)
[Tue Feb 15 08:21:40 2011] [error] Unable to configure RSA server private
key
[Tue Feb 15 08:21:40 2011] [error] SSL Library Error: 185073780
error:0B080074:x509 certificate routines:X509_check_private_key:key
values mismatch
I'm assuming this is because in Remote Manager under Configure I chose:
"Create OpenSSL Certificate and configure httpstkd to use the OpenSSL
Certificate"
Now I can't get back in to see if there is anything to be done there.
surely:~ # cat /etc/SuSE-release
SUSE Linux Enterprise Server 10 (i586)
VERSION = 10
PATCHLEVEL = 3
surely:~ # cat /etc/novell-release
Novell Open Enterprise Server 2.0.2 (i586)
VERSION = 2.0.2
PATCHLEVEL = 2
BUILD = FCS
As always thanks
Bob Crandell

Bob,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Problem with % signs in key value url parameter pairs

Hi,
Tomcat 5.5.9
Java Version 1.5
I'm having a little difficulty passing a certain key value pair via a URL to the processing component of my web application.
If I submit a value for lets say parameter 'product_name' and that value starts with a % sign then the value is passed to my processing component as 'null' if I remove the % sign the value is correctly received.
Anyone come accross this on a Tomcat server?
The data has to be tagged onto the URL rather than as a form 'Post', as it is used to create and populate a popup window.
Thanks in advance.

So the % is used in URLs to mark certain escape sequences, so when you put it in you value, it thinks that the value is actually an escape sequence, and probably translates poorly on the opposite side.
You will actually need to use the escape sequence for the % sign to get it work correctly. I don't recall the actual escape value, but:
If you use JSTL to put together the URL for you, you shouldn't have a problem, the values will be escapes:
<c:url var="popupAddress" url="http://www.mydomain.com/myapp/mupage.jsp">
<c:param name="product_name" value="%Whatever"/>
</c:url>
<script type="text/javascript">
document.open("<c:out value="${popupAddress}"/>","Popup");
</script>

SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter

This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.

Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report.

Remote Key values in one file

Hi,
Is there anyway to get the multiple remote key values(different remote systems) for a single record in a single XML file?
Regards
Nisha

Hi Nisha,
you can do this with Syndicator. Asuming that you have defined a XSD for your desired XML format, you can create a syndication map that uses the remote keys for all remote systems. The tab "Map Properties" has a property named "Remote Key Override". This property allows you to select the remote systems that you want to include in syndication. If you add all existing remote systems and set the property flag "Suppress records without key", syndicator creates an XML containing all remote keys.
A suitable XML format could be something like
<Root>
<Record>
    <MdmId />
    <RemoteSystemCode />
    <RemoteKey />
</Record>
</Root>
Record is the repeatable node.
Use MdmId to identify the record in the repository (this is optional of course).
Use RemoteSystemCode and RemoteKey to syndicate the key mapping.
Best regards
Michael

How can we export the Primary key values (along with other data) from an Advantage database?

One of our customers is moving from our application (which uses Advantage Database Server) to another application (which uses other database technology). They have asked us to help export their data, so that they can migrate it to another database system. So far, we have used the Advantage Data Architect (ARC32) "Export Table Structures as Code" functionality to generate SQL. We used the "Include existing data" option. The SQL contains the necessary code to recreate the tables and indexes. The customer's IT staff will alter the SQL statements as necessary for their new system.
However, there is an issue with the Primary Keys in these table. The resulting INSERT statements use AutoInc as the type for the Primary Key in each Table. These INSERT statements contains "DEFAULT" for the value of each of these AutoInc fields. The customer would like to output an integer value for each of these Primary Key values in order to maintain referential integrity in their new system.
So far, I have not found any feature of ARC32 that allows us to export the Primary Key values. We had been using an older version of ARC32, since our application does not use the latest version of ADS. I did download the latest version of ARC32 (11.10), but it does not appear to include any new functionality that would facilitate doing this sort of export.
Can somebody tell me if there is such a feature in ARC32?
Or, is there is another Advantage tool to facilitate what we are trying to accomplish?
If there are no Advantage tools to provide such functionality, what else would you suggest?

George,
It sounds like the approach you are using is the correct one. This seems to be the cleanest solution to me especially since the customer is able to modify the generated SQL statements for their new system.
In order to preserve the AutoInc values I would recommend altering the table and changing the field datatype from AutoInc to Integer. Then export the table as code which will export the actual values. After the tables have been created on the new system they can change the field datatype back to an AutoInc type if necessary.
Regards,
Chris Franz

How to create a PDF with substituted key-value and table-values using a template language

I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
What is a recommended template language and product to accomplish this?

Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

How to look up a random key value

I'm importing some data in a flat file. That data is going to be loaded into a fact table. That fact table connects to some dimension tables and I need to the keys out of those tables. The problem is, this isn't a look up. There is no key value in the
source file to match against. What I need to do is to go into the dimension table, pull out some existing keys at random and then drop them into the data flow. I have NO idea how to do that. Ideas?

Never mind. I just put in a hack solution. Not awesome but does what I need it to do.

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

Wants to display variable as key value in Free Char section of report

Hi All,
I have a variable based on characteristic. When I execute report, I pass value for that variable. And I get text of that variable value, displayed in Free Characteristic section.
Instead of text, I want to display key value there.B'coz many times, texts are ambiguous and quite fictional examples.
I have tried changing 'Display as key' in Business explorer tab of infoobject definition. And in query definition, I already have 'Display as Key'. So I am wondering what else needs to be done for this change.
I will appreciate if someone can help me on this.
Thanks,
Pranali

Hi Pranali,
You can display all variables used in Query in workbook from BEx Menu(Tool bar) -->> Layout --> Display Text eliments --> Variables (you can see two entries for each variable) one for key and one for Text.
Hope it Helps
Srini

Db adaptor for insert- SQLException: [SQL0803] Duplicate key value specified

While invoking db adaptor for insert on table 1 selecting values form another table, i am gtting error ; before3 insert i am updating table 2nd using db adaptor
QUERY insert into CRPDTA.F5504579 (SELECT * FROM CRPDTA.F5504571 WHERE PAHDC=#v_updatedRecord_HDC)
Error :
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert_Ledger_F5504579' failed due to: Pure SQL Exception. Pure SQL Execute of insert into CRPDTA.F5504579 (SELECT * FROM CRPDTA.F5504571 WHERE PAHDC=?) failed. Caused by java.sql.SQLException: [SQL0803] Duplicate key value specified.. The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "--803" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>[SQL0803] Duplicate key value specified.</detail></part><part name="code"><code>-803</code></part></bindingFault></bpelFault>
Please suggest....

Easter1976 wrote:
Hi please can you help me. I think I am having problems with tranactions. I am deleting from a table and then inserting in the same table with the same key that I have just deleted. Simple then - don't do that. It suggests a flaw in the design. Either use a new key or do an update.
Note that you would get a duplicate key error if the table is set up such that it doesn't
actually delete but doesn't something such as creating a log entry with a delete flag set.

How to get the KEY VALUE of sales order

Hello friends,
iam adding a sales order through DI-SERVER to the SAP db.after adding iam getting a key value (i,e Doc no)..i want it to display it in my frontend....can u please tell me how to display the return key value of my sales order
regards,
shangai.

Dear Shangai,
To retrieve the last Doc/Object added through DI API (DI Server is based on DI API) there is a method called "GetNewObjectCode" which can be used to retrieve the last DocCode which was added into the B1.
Please try the function for more help please look at the help files RefDI.chm which is installed with the SDK installation for B1.
Regards
Arshdeep

How to get the key values of record in ADF Read-only Form?

Hi
I am using ADF Business Component VO.
I have a search page( ADF Search Form) and I am displaying the results of the search in a ADF Read-Only Table( only few columns are shown) .Then by selecting a record and clicking on the button 'View' , I am navigating to a different page(ADF Read-Only Form) to show all the columns of the table for the selected record.
In the second page, I have one more button 'view child details'.Now when I click on this view child details button, I have to show another page(ADF Read-Only Form) which fetches the data from one of the child tables of parent record.
My idea is to create a ViewLink between the parent and child tables.( I have more than 15 child tables for a parent table).
Is there anyother way to achieve this functionality?
Please respond ASAP.
Thanks in advance.
~Sivaji..
Message was edited by:
Sivaji...the boss

Sijav,
ASAP?
Anyway - yes, you can do this with a view link. When you add the child table to the application model, make sure you actually add it as a child of the parent table instance (select the parent VO first, then use the shuttle to add it). This way, the parent->child relationship should be coordinated for you automatically. You should not need to get the key values manually.
Then, when you create the page to show the detail table, make sure you use the child table that is shown as a child of the parent table in the data control palette (expand parent table to see the child).
Hope this helps,
John

How to get the key value of a HashMap?

Hi,
I have a HashMap which obviously has key/value pairs. e.g. 1=3, 2=6 etc. I can get the value by using the method xxx.get(key), but I want to be able to get the value of the key. For example, when I have the value 3 I want to be able to get the value of the key that identifies it, in the example above it would be 1.
Is there a way to do this.
I'd appreciate any help.
Thanks,
Chris

A HashMap guarantees unique keys, but not unique values. In the following situation:
a=2
b=5
c=2
If you wanted to do a lookup based on the value, what would your lookup of 2 return? a or c?
At any rate, if you can guarantee that your values will be unique, you could always fill a second HashMap while filling the first; the second HashMap would simply have the original values as the keys, and the original keys as the values.

Dimension based on OLAP source returns text value not key value

Hi,
I have a Business Objects Universe based on a BEX query sitting on top of a BW datasource. I imported the BEX query into Designer and several dimensions were created for me as well as several detail objects. I was hoping the dimension objects created when pulled onto a Webi report would display the KEY value of the info object from BW, but unfortunately it appears to be pulling in the text value of the info object.
Is there a way to change the default behavior so that the default dimension created will pull in the key value?
Example:
Universe dimension Object definition: [ZCPCNTR].[LEVEL01]
When pulled into a Webi report the MDX statement generated contains: NON EMPTY [ZCPCNTR].[LEVEL01].MEMBERS DIMENSION PROPERTIES MEMBER_CAPTION
Somewhere ".MEMBERS DIMENSION PROPERTIES MEMTER_CAPTION" gets added to the MDX statement. I think this results in the Webi report displaying the text of the info object as opposed to the key value. Is this modifiable? If so what do I change to get it to display the key value?
Thanks,
Tim

SAPBO786,
Yes I do see the key value as a detail object under the dimension. Do you kow of a way to change the default behavior so the dimension returns the key value?
I have a bunch of reports (approx. 50) I built based on the dimension assuming the value was going to be key. I don't want to go back and change all those reports if possible. I am aware that I can take the Key detail object, change that to a dimension object and then modify my reports to pull that new dimension onto them, but I don't want to do that if there is a way to change the default behavior.
Thanks,
Tim

Display the second report as modalform and filter with primary key value of first report when you click on first report column link

Hi All,
I have two reports.
1. order report
2. order detail report
when you click on the order report column it display the order detail report as a modal form.
i was done below steps.
1. In page header i was written the below code
<link rel="stylesheet" href = "http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/
redmond/jquery-ui.css" type="text/css" />
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.js"> </script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.js"> </script>
<script type="text/javascript">
$( function() {
$('#ModalForm1').dialog(
autoOpen : false ,
width :470,
height: 500,
resize :false,
function openForm1()
$('#ModalForm1').dialog('open');
function closeForm()
$('#ModalForm1 input[type="text"]').val('');
$('#ModalForm1').dialog('close');
</script>
2. order report.
3. order detail report
select * from order_details where order_id = p_order_id;
region header
<div id="ModalForm1" title="Ordered Items" style="display:none">
<p class="msg"></p>
footer
</div>
4. created the hidden item in order detail report.
5. in order report column attributes i was given link like below.
javascript:$s('p_order_id','#order_id#');openForm1();
when i click on the order report column link it passing the row primary key value to hiddent and open the report as modal form. however it is not filter the report with hidden item. it showing the no data found.
problem is hidden item value is not submitting. once we submit that value it showing the 2nd report with filter data.
can any help me to achieve above requirement.
apex: 4.2
oracle 11g
Regards,
Vijay.

Vijay,
Issue 1: Your usage of $s() JavaScript API seems to be wrong. For the first parameter, you need to use the name of the hidden page item and not p_order_id.
javascript:$s('P1_ORDER_ID','#ORDER_ID#');openForm1();
Issue 2: Seems like you are not setting the hidden page item's value in session state. Assuming your hidden page item is called P1_ORDER_ID, Under "Region Definition" tab of your "Order Detail Report" under "Source" tab, for page items to submit, enter the name of the hidden page item P1_ORDER_ID.
Thanks!
JMcG

Key Values Mismatch

Similar Messages

Maybe you are looking for