Keyboard and Mouse no longer work after update

Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly. However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal. Unplugging and reconnecting my keyboard and mouse did nothing.
A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled. Apparently it's a fairly standard warning).
The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
Does anyone have any ideas as to what might have caused this issue?
Thanks for any help you can provide.

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Similar Messages

Keyboard and mouse no longer work when booting into Rhapsody

I still have a bootable partition with the last release of Rhapsody (aka Mac OS X Server) on my Power Mac G4 but it's been a while (years!) since I actually booted it up. The G4 also has bootable partitions with Mac OS X 10.2, 10.3 and 10.4 (and is in daily use running 10.4.11).
I used to boot into Rhapsody occasionally, mostly for interest's sake, occasionally to test Unix software on legacy systems; I haven't tried to do so since installing 10.4 until now.
When I booted up from the Rhapsody partition today, all went well -- the system started up fine, and the login screen appeared -- but the keyboard and mouse no longer work. I even got out the original keyboard and mouse that came with the G4, with no luck.
I assume that recent firmware updates have bypassed support for Rhapsody. I guess I'm not surprised -- it was a developer-only release, after all. But has anyone a solution?

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Keyboard and Mouse don't work after upgrade

Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me. I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
Here is my Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
I tried to downgrade to different versions of kernel, i didn't work.
There are "00-keyboard.conf" "10-evdev.conf" "10-quirks.conf" "50-synaptics.conf" files under /etc/X11/xorg.conf.d
So i don't know what to do else, i hope someone can help me.

ewaller wrote:
When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use. In particular, I am interested in modules that contain 'lpc', So try lsmod | grep lpc
lpc_ich 21163 0
Post the module names that that finds here. Also, look in your initrd for modules for the LPC bus driver. It does not exist in mine.
./usr/lib/modules
./usr/lib/modules/3.15.8-1-ARCH
./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.devname
./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
./usr/lib/modules/3.15.8-1-ARCH/kernel
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
But, my keyboard and touchpad don't exist in the ISA bus address space. Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus. I think you don't have that driver available in the initrd preboot environment
Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
Pse wrote:
Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else.

PS/2 mouse no longer works after update

I just updated my system, and now the mouse doesn't work.
The cursor is stuck in one area of the screen. I can move it a few centimeters in any direction, but it snaps back to the original position when I stop moving the mouse. The problem is rather bizarre.
I switched out mice to make sure it wasn't a hardware problem, and the mouse works fine in my other operating systems.
What could cause this really odd behavior? I'm thinking I have to change a config file, but I'm not sure what one. My xorg.conf looks fine.
Thanks for your help.

I checked my xorg.conf against the backup with meld and there weren't any changes made to it besides the vendor name of my monitor: Acer. This is the same xorg.conf I used before updating and I didn't have problems with it before, which is why I think the problem may lie somewhere else.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Apr 17 00:40:10 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
# Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "p201w"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

Microphone and speaker no longer working after update to 4.3.3

2 hours ago i have updated my iPhone 4 to iOS 4.3.3
It is a standard, never jailbreaked or whatever, iPhone 4, which was running 4.3.2
After the update suddenly i heard no sounds when pressing any buttons.
I checked the settings, but everything was still the same.
I then tried to call a friend, but when the connection was made i neither heard him nor did he hear me.
After that i tried :
1) changing the ringtone, to see if any sound would come fromt he speakers : nothing
2) running the dictafoon, but when pressing record i get : no micophone available. Connect a microphone to record memo's
3) connecting a headset to see if that would work : nothing
4) connecting a bluetooth headset : nothing
5) restoring files and trying all again : nothing
6) restoring all and trying again : nothing
7) starting iPhone in recovery mode, resetting all (like it was a new iPhone) and trying again : nothing
Anyone got any bright ideas left ?

If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

Is anyone else having trouble with KEYBOARD SHORTCUTS, mine no longer work after updating to iOS6.

For exapmle, in my shortcuts I have "idk" to change to "I don't know" whilst typing.

IDK if this will help, I turned documents off in icloud and they worked, but when I toggle or turn documents on....no luck. I read in a separate post to uninstall and then reinstall emoji.....I really don't want to delete and reenter all my shortcuts I have at least 10 for every letter. Has anyone tryed the emoji un/reinstall? I'm fine with the documents being off in icloud......for now. I hope this helps someone.

My wireless keyboard and mouse do not work on my All-In-One computer?

Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

"This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted.

PS/2 keyboard and mouse suddenly stop working

This problem only started happening today (it occurred twice). My keyboard and mouse suddenly become unresponsive after a few hours of use, yet everything else seems to be working (video kept playing). I plugged in a USB mouse and it worked fine, so I could reboot.

Sorry, just noticed the problem is already being discussed in another thread: http://bbs.archlinux.org/viewtopic.php?id=43932

Keyboard and mouse don't work at all in 1 on 2 times!

When my computer has already been started up once and I start it up again, then the PS2 keyboard and mouse will not work, but only 1 on 2 times precisely! So one time the keyboard and mouse are working, the other time keyboard and mouse are not working. The rest works fine. Quite mysterious isn't it? Who has a solution to this?
If the power has been totally off and I put it back on again, then keyboard and mouse work properly.
I have looked into the BIOS, Integrated Peripherals for something like PS/2, I couldn't find it, I have put out several things in the BIOS, but it didn't work.
Now follows a list of everything I see when I am into the BIOS with the standard settings for integrated peripherals.
Could it help to put items on and off here?
Onboard device ->
raid config
on chip usb [v1.1+v2.0]
usb/storage support.....enabled
usb mouse support......enabled
sata 1/sata 2...............enabled
sata 3/sata 4...............disabled
ac97 audio.................disabled
mac lan (nvidia).........auto
via on board 1394......enabled
On board i/o chip setup ->
onboard fdc controller.......enabled
onboard serial port 1.........3F8/irq 4
ir function select................disabled
onboard parallel port.........378/irq 7
parallel portmode..............ecp+epp
epp mode select.................epp 1.7
ecp mode use dma..............3
I couldn't find a possibility for a hardware reset in the BIOS. It should be in PnP/PCI. Does anybody know about these things?
Computer:
AMD Athlon 64 3200+, MSI K8N Neo Platinum, nVidia FX-5200 128Mb, Aopen H600B, MS keyboard, Optical muis, Windows XP Home.

Quote from: Svenomous on 25-September-06, 23:08:26
Have you tried using a usb keyboard/mouse?
I don't use any usb, only use PS2. Maybe it is possible to use some sort of a PS2 to usb converter, but I would rather like the PS2 to work.

My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id. Any answers or reasons why on the iPhone 5 is not working???

My iMessage and facetime is not working after updating to ios 7...
Any answers on how to fix it? I've tried to restart, restore connected to itunes, but nothing.

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

Keyboard and mouse won't work

Help! they keyboard and mouse have stopped working on my iMac. I had adjusted the universal access features for my mother who is legally blind to try the Voice Over features on my iMac and I thought that I hadn't reset something correctly when the keyboard would not let me type an e-mail this morning. Now, not only does the keyboard not work, but the mouse is not responding. I have a Pages document open and am unable to type or click anything in it, the pages menu, or anything on the desktop. when I move the cursor over the menu options or across the desktop icons on the bottom of the screen, where I should be getting an arrow to select the items I get the bar cursor like you get when you are typing something. What did I do and how do I fix it!

By the way, the keyboard and mouse do not show up in the system preferences either. And this is a 1.83GhZ dual core, white Macbook if it makes a difference.

Hi, my Hp Pavilion lap, keyboard and mouse is not working

Hi, my Hp Pavilion lap, keyboard and mouse is not working while i am login into windows 8.1. but it works in bois mode. can you please tell me the reason

Hi there,
I had the same problem so did some research. Downloaded this driver and now everything's sweet. Hope it works for you too!! (This is only to get your hdmi working, sorry can't help you with the rest)
http://www.nvidia.co.in/object/Quadro_3D_Vision_USBdriver_197.03_in.html

HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

Keyboard and Mouse doesn't work on system preferences after 10.5.2 upgrade

The keyboard and mouse configuration through the system preferences painel has stopped working after installing the update to version 10.5.2 of the Mac OS X.
This occurs when using the Brazilian Portuguese language. Any suggestion?

I've found a fix here:
http://antoniofonseca.wordpress.com/2008/03/12/correcao-para-o-problema-do-tecla do-e-mouse-no-leopard-1052-em-pt-br/
In short: there's a problem with the Brazilian Portuguese translation, it's the only language affected.

I have a 2011 iMac 27" i7 and the bluetooth connected trackpad, keyboard, and mouse all go haywire after awhile. This just began today and cannot make the issue go away. Nothing was downloaded, no software updates, etc. please help!

Oops, sorry, using my iPad for this. My iMac's Bluetooth-connected devices are going haywire after awhile of use. All three things--the trackpad, keyboard, and mouse--act up, especially the trackpad, by being overly sensitive and often just clicking and moving on its own. I've restarted the computer, I've swabbed batteries out of the devices, and nothing has worked so far in solving this issue. I downloaded Lion when it came out and had the update last week (I think), but today is the first day to experience this issue and nothing was downloaded today. I've been sending out a flurry of emails, but nothing else to hint at why this problem happened. Any ideas??

Humm, thank you. I have my iPhone and iPad on the wireless network, and yeah--using the rechargable batteries. I'll try normal batteries and re-join the phone and get back to you. May take a day or so because the semester starts today. Thank you again.

Keyboard and Mouse no longer work after update

Similar Messages

Maybe you are looking for