Keys for the authentication with Card Manager.

Hi!
I got a problem with authentication with CM (JCOP Tools) sending init-update command.
I already have 2 cards blocked.
I use KMC key. Is it wrong?
Maybe sombody can tell me, which keys i must use?
Thanks.

You have only one key that you call KMC right ?
It may be possible that the keys stored in the CM are diversified using your KMC.
I know 2 method used for diversification according to Visa specs. These
diversifications are called Visa CPG 1.0 and Visa CPG 2.0 (Visa CPG stands for
Visa Card Production Guide). These diversification methods are using the card
CPLC data.
Unfortunately these diversification methods are not public.Then I can't discribe
them in this forum.
You may check with Visa people to get these two specifications.
Mainly if JCOP Tool is answering this error after an Init Update, it means that JCOP Tool was not able to verify the card cryptogram. Then that the keys set
in the tool are not corresponding with the ones personalised in the CM.
Thomas
http://jaccal.sourceforge.net/

Similar Messages

How to obtain the Management Certificate Key for using Azure with Release Managment

In the "Release Management" app in administration --> Manage Azure one must provide a "Management Certificate Key".
I have created a self-signed cert and uploaded it to Azure Portal --> Settings --> Management certificates
How do I get the key?
Thanks ))

Hi Atwater and Sons,
when you look at the blog post paragraph four you find a link
Download the settings file from the Azure portal to get your subscription ID and Management Certificate key.
After you have downloaded the file, open the file with Notepad.
You will find everything there - except the storage Account Name:
<PublishData>
<PublishProfile
SchemaVersion="2.0"
PublishMethod="AzureServiceManagementAPI">
<Subscription
ServiceManagementUrl="***"
Id="***"
Name="***"
ManagementCertificate="***" />
</PublishProfile>
Copy the Id and the ManagementCertificate and past them into RM (Manage Azure)
Your Storage Account Name: Blog Post Paragraph four
Go here to get the name of an existing storage account or add
a new storage account using the Azure portal.
Regards,
Daniel

Where can I find an Access key for the user with "AS ABAP sneak preview" ?

Hi all,
I have installed AS ABAP sneak preview on my laptop.
I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
Please advise me on above question.
Thanks,
Haresh Solanki

Hi Rich,
I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
I really got confused with this Access Key thing, can you provide me some insights?
Thanks,
Haresh Solanki

I have logic pro studio 8 and the upgrade, however it will not upload on my mac book pro. It says i need a product key for the logic 9 and it come with one.

I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro. Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box. i need some help

Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.

Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

Looking for examples of VI with two or more inputs for the 1200 daq-card ( PCMCIA )

Thank you , if you can help me by sending VI examples for the 1200 daq-card
, with 2 or mores inputs

You can find several examples that will work with the DAQCard-1200 at zone.ni.com/libraries/.
Then look under Data Acquisition. There are also examples that ship with
LV and NIDAQ. Look in ...\Labview\examples\daq\anlogin\.
"david frazao" wrote:
>Thank you , if you can help me by sending VI examples for the 1200 daq-card>,
with 2 or mores inputs>>

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

How to generate keys for the records

Hi Gurus,
can anybody explain me how to create keys for the recors while working with keymapping.
Regards
Ravikumar

Hi Yugandher,
Is your Question pertaining to Key generation in MDM or using the Remote key for importing and syndication in MDM?
Remote Keys are system specific uniques maintained in MDM while importing source records from different source system.You need to Enable key mapping in Console and then map the <Remote key> field to the unique key in Import manager and do similar mapping in syndicator as well.
You can view the key mapping for differnt records under the Edit key mapping (context menu) right clicking on any record.
To know more on this refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c (Key mapping)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30843106-5539-2b10-75a9-da483911b0d9 (Key mapping)
For Key generation in MDM you can use the Qualified range property of Remote system in Console for Key genearation.However these keys will be genearted only after syndication and are created and assigned within MDM and not maintained from any source remote system.
Hope It Helped
Thanks & Regards
Simona Pinto

WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
    <services>
      
      <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
        <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
        
      </service>
    </services>
</system.serviceModel>
    <system.webServer>
        <security>
            <authorization>
                <remove users="*" roles="" verbs="" />
                <add accessType="Allow" users="myCustomer" />
            </authorization>
        </security>
    </system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
   System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
   System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
   System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
   System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
   System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +901424
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272

When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ?

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ? My old mac is deleted ...

We would need to know the version of Mac OS you are running and the version of Photoshop you want to install.
The serial number is the tricky part. If you have no idea where you placed it and did not register your product with Adobe, your chances are very low of retrieving it.

Keys for the Standard Messages

In the tutorials we find the example to Customizing a Standard Validator Message, and we can see a table of Keys for the Standard Messages, my question is, where can i find a table with all messages displayed including the Message Alert?, especifically one like this:
System Messages
Error Invalid cursor position

rename defaulttheme.jar > defaulttheme.zip
copy messages.properties file to a directory
copy and rename this file eg: messages_hu_HU.properties
after that you can open and edit this files in Creator
finaly copy back this files to the defaulttheme.zip and rename > defaulttheme.jar

Looking for answer keys for "Object First with Java"

Where can I find a book with anwser keys for the book " Object First with Java" Third Edition?

zxcvbnm wrote:
Where can I find a book with anwser keys for the book " Object First with Java" Third Edition?This ought to be an interesting thread. :)

I need a domain key for the icrop app. Any ideas on how to find this?

I need a domain key for the icrop app. Any ideas on how to find this?

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Invalid Layout Key for the specified Integrator

I have created a new Integrator, designed the layout and created a form function. Whe I click on the form function from the responsibility, I am getting the below error.
20009: <layout key> is invalid Layout Key for the specified Integrator
Please help me resolving this error.

Please see if (Creating Lines Using BEE Spreadsheet Interface Errors With '801:PAY_BATCH_LINES_CRT is an invalid Layout Key for the specified Integrator' [ID 1176075.1]) is applicable.
Thanks,
Hussein

Keys for the authentication with Card Manager.

Similar Messages

Maybe you are looking for