Invalid Layout Key for the specified Integrator
I have created a new Integrator, designed the layout and created a form function. Whe I click on the form function from the responsibility, I am getting the below error.
20009: <layout key> is invalid Layout Key for the specified Integrator
Please help me resolving this error.
Please see if (Creating Lines Using BEE Spreadsheet Interface Errors With '801:PAY_BATCH_LINES_CRT is an invalid Layout Key for the specified Integrator' [ID 1176075.1]) is applicable.
Thanks,
Hussein
Similar Messages
-
Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
VikramTo load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected] -
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
Hi All,
I am trying to start my oracle 11g database on windows 7 PC and i am getting below exception
SQL> startup mount
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
ORA-48140: the specified ADR Base directory does not exist [d:\oracle\app\product\11.2.0\dbhome_1\database\<oracle_base>]
ORA-48187: specified directory does not exist
OSD-00002: additional error information
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is incorrect.
SQL>
Earlier it was working fine. For learning purpose, i have created spfile using pfile and after that i got this issue.
Please help.
Regards,
Sunilsunil907 wrote:
Hi,
I have provided diagnostic_dest folder location (physical path). Now i am getting some different kind of error on startup.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2182592 bytes
Variable Size 616563264 bytes
Database Buffers 444596224 bytes
Redo Buffers 5595136 bytes
ORA-00205: error in identifying control file, check alert log for more info
Please help
What does your own research of 'ORA-00205' indicate?
the text of the error message is pretty self explanatory .. it couldn't find the control file.
The control files are specified by the "control_files" initialilzation paramter. When you get this error, the instance has started but was unable to mount the control file. since the init file (spfile) was processed and the instance started you can easily see what it thinks are the control files.
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Jul 16 12:51:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 835104768 bytes
Fixed Size 2217952 bytes
Variable Size 490735648 bytes
Database Buffers 339738624 bytes
Redo Buffers 2412544 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL> show parameter control
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string /u01/app/oracle/oradata/FUBAR/
controlfile/o1_mf_8ybx4t7w_.ct
x, /u01/app/oracle/flash_recov
ery_area/FUBAR/controlfile/o1_
mf_8ybx4tom_.ctl
control_management_pack_access string NONE
SQL>
So what did you do in fixing your original problem that caused your control_files parameter to go south? -
Keys for the Standard Messages
In the tutorials we find the example to Customizing a Standard Validator Message, and we can see a table of Keys for the Standard Messages, my question is, where can i find a table with all messages displayed including the Message Alert?, especifically one like this:
System Messages
Error Invalid cursor positionrename defaulttheme.jar > defaulttheme.zip
copy messages.properties file to a directory
copy and rename this file eg: messages_hu_HU.properties
after that you can open and edit this files in Creator
finaly copy back this files to the defaulttheme.zip and rename > defaulttheme.jar -
CWSerial/CWGPIB on Win7 :"The subject is not trusted for the specified action"
Hello,
I'm currently trying to migrate a VBA software from WinXP + Excel2000 to Win7 + Excel2010 and I'm encountering a big problem. The software is using activeX control such as CWSerial and CWGPIB but when I'm trying to add them I get the following error "The subject is not trusted for the specified action".
I'm more or less certain it's a permission problem, I just can't figure out how to solve it. I'm also pretty sure it's not a VBA version problem because I tried to do the same manipulation on a Win7 + Excel2000 machine and got the same error, so it must be related to the OS.
What I have already tried:
Regsvr32 on cwinstr.ocx.
Downgrading the Microsoft Office version to 2000 again.
Set Excel's Trust Center to enable all controls without restriction.
Fiddle with the registry keys following instructions on internet for similar problems.
Re-install everything on a new machine.
Did anybody face the same problem and/or has a solution? I'm working on a Virtual Machine so I can test every idea without fearing data loss.
Thank you for your help!The only way to know what is going on is to retrieve the certificate and check who is the issuer.<br />
It is always possible that the server doesn't send the full certificate chain (intermediate certificates), so it might help to post a link to this website
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate. -
No PPPoE server has been found for the specified service.
I am getting the following error message when connecting to our ISP via PPPoE. I have a PC that connects to the ISP no with problems.
Have tried creating a new service but still have the same problem.
Error message
No PPPoE server has been found for the specified service. Please delete the service name option ans try again.Not sure what you are trying to do but it PPPoE (Point to Point Protocol over Ethernet) connection and authentication will be handled at the modem.
This is only true if the modem has an integrated PPPoE client most Modems dont have this. A modem/router does have this but may need reconfiguring if the ISP supplied it in bridged mode.
Mongolain-Al
What is the make and model number of your modem? -
How to get the values multiple times for the specified element - ABAP IXML.
Hi all,
i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name = ippara2
Parameter type = binary
2nd record
Inbound plug name = hi
Parameter name = hipara
Parameter type = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM -
How to list a material in a plant for the specified delivery date
Hi experts,
I am quite new in the area .I have now a problem with PO.
At the item level of my PO, the plant will not be extracted automatically. Is this normal?
And after I entered the plant manually and the error message shows up:
""the material xx not listed in plant".
To be more specific, "Material xxx is not listed in plant xxx for the specified delivery date".
I have checked the material master data and found this material has been extended for this plant.
How can I fix this problem?
Best regards,
Fan
Edited by: Fan Mou on Aug 27, 2009 3:18 PMHi,
At the item level of my PO, the plant will not be extracted automatically. Is this normal?
Yes this is normal, however you can set a plant to be proposed by the system. To do this in the purchase order, click the button Personal setting, which you can find at the top right hand side. The system will open a personal settings window. In the default values tab, under PO item tab, you can enter the default plant value and other data. Save the data. Then whenever you create a new purchase order, the system will populate these default values.
""the material xx not listed in plant"
Check whether the material master -purchasing view has been activated or not.
Regards, -
Posting is not possible for the specified company code.
Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul -
ORA-20100: AppDomain could not be created for the specified security level
We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ? -
How to find out what is the lock key for the computer
How to find out what is the lock key for the computer?
You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu. -
To set the short cut key for the menu when using CommandDesign pattern
Hi All
I have a menu File which has two menu items Load and save.
Here for implementing the actionperformed iam using the command design pattern.
Now iam not able to set the short cut key for the menu item......
Please help me..............
Thanks
ArchThe Java Tutorials: [How to Use Menus|http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]
db -
I have a new mac and want my old photoshop on it , how get i the old serial key for the new ? My old mac is deleted ...
We would need to know the version of Mac OS you are running and the version of Photoshop you want to install.
The serial number is the tricky part. If you have no idea where you placed it and did not register your product with Adobe, your chances are very low of retrieving it. -
I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro. Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box. i need some help
Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.
-
How to see all users who are allowed permissions for the specified entity ?
How to see all users who are allowed permissions for the specified entity ?
And change user permissions for the current entity
from Moscow with moneyVincent,
... and how to change entity permissions for some users?
from Moscow with money
Maybe you are looking for
-
Error while creating sample table.
Hi all, I was getting warning messages after creating a z table in se11.As per the previous post i was able to resolve it. but now when trying to use the screen painter and click on get from dictionary i m getting the message Table not active in dic
-
Invoice Days are not calculating when a Days limit exists.
Hello, We are having an issue with both our Customer and Vendor invoices. When using a 'payment term' with a 'Days limit' the Due date is not calculating at all. The 'Days' field in the 'Payment tab' just comes up as a blank. This functionality used
-
Web templete showing "EA" in the Key figure but not in Bex Report
Hi, When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value.. Can you pls help us with any input ?
-
Outbond interface programme to upload customer master data.
Hi experts, i need to develop an outbound interface programme to upload customer master data,which will be received from sap and posted to web methods using standard function mudule.can any one help me?
-
Why is aperture not showing up in iweb?
why when I go to iweb, can I not see aperture in the media sidebar anymore, only iphoto?