KImportXMLFileCmdBoss differencies on Desktop and Server

Dear developers,
I have this issue when running my plugin in InDesign Server CS2
09:57:38 ERROR [server] Adobe InDesign is shutting down. A serious error was detected. Please restart InDesign to recover work in any unsaved InDesign documents.
If I run the same plugin in InDesign Server CS2 Debug, there is also 'About to use nil pointer statement in the server log.
If I run the same plugin in InDesign CS2 there is NO such error.
The problem comes when I try to process kImportXMLFileCmdBoss. All interfaces should be set properly as the XML import is OK in the Desktop version of InDesign.
Do you have any ideas why this may occur?
Best regards,
Pardál

It is not as simple as just a missing links. I tried importing an XML file with "missing links" and I got the following message on the InDesign Server log:
17:12:16 INFO [javascript] Executing Script
17:12:16 ERROR [xml] A specified file is missing: _DSC52134.jpg
17:12:16 ERROR [server] JavaScript Error!
I'm not sure what you mean by missing links. I imported the following XML file, where the file referred to in the href didn't exist. InDesign Server handled it correctly, by giving an error message.

Similar Messages

QM Desktop and Server recording

Can I use both Desktop and Server (BiB) recording for the same phone/desk?
I want to be able to do screen and voice recordings as well as allow real-time monitoring.
Pretty sure the answer is yes but but having trouble getting validation.
Thanks

Hi Anchoudh,
Thanks for the reply, I have read the thread before, but it isn't really help to solve the problem. I am using Server Side Recording, and I checked the codec for the calls (G.711), and also the calls recorded are not encrypted, I can see the recordings too which means that SPAN works, right?
So I am not sure where the problem could be.
Thanks very much,
Regards,
Dong

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients".

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients". Does anyone happen to know the reason for this? It should have at least the same number of clients as the largest collection.
Thanks,
James
James A+, Network+, MCP

Hi James,
The All Desktops and Server collection only contains devices that show client=yes.
Meaning the Configuration Manager client is installed on those devices.
This WQL query will give you a collection of all devices that do not have the client installed.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where (SMS_R_System.Client is null or SMS_R_System.Client = 0) and SMS_R_System.Name != 'Unknown'
Another handy collection is all clients that are inactive (No communication for the default 7+ days)
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_CH_ClientSummary on SMS_G_System_CH_ClientSummary.ResourceId = SMS_R_System.ResourceId where SMS_G_System_CH_ClientSummary.ClientActiveStatus = 0
I normally create both and then a third collection of all devices and exclude the above two which should show you all healthy devices.
Have a look at the ccmsetup.log file on the client if it has attempted to install the ConfigMgr client but failed.

Oracle Streams Between Desktop and Server

Hi.
I have a Streams environment defined between a Suse Desktop and a Suse Server.
Characteristics:
Desktop Oracle:
- compatible = 10.2.0.1.0
- streams_pool_size = 100m
- job_queue_processes = 2
- global_names = true
Server Oracle:
- compatible = 10.2.0.3.0
- streams_pool_size = 112m
- job_queue_processes = 10
- global_names = true
After I execute all necessary steps to define Streams in this environment, I execute the following queries and the results is OK: ENABLED, CAPTURING CHANGES, etc.
select capture_name,status from dba_capture;
select capture_name,state from v$streams_capture;
select status,error_message from dba_propagation;
But now appear the problem: NOTHING is replicating. I do changes in tables of the Source DB e nothing happen in tables of Destination DB.
Please, how to discover or debug what are happening ?
Thanks

Hi.
After some time, now I have the ERROR_MESSAGE with blacks in the DBA_PROPAGATION. I have these results:
select capture_name,status from dba_capture; => CAPTURE_NAME ENABLED
select capture_name,state from v$streams_capture; => CAPTURE_NAME CAPTURING CHANGES
select status,error_message from dba_propagation; => ENABLED (null)
The DBLINK between SOURCE and DESTINATION DBs is OK.
But again, NOTHING is replicating.
Thanks.

11gR2 Installer - Desktop vs Server option

Hi all,
I am installing 11gR2 on SLES 11, and in the installer gui screen, there is Desktop and Server Install type option.
Can I install server type on desktop pc and vice versa desktop on server machine?
I am given a HP machine, and i dont know if it is a server or workstation desktop because it looks like server too.
How can i tell if a machine is a server or a workstation?
Thanks a lot,
Yxz

"If you are installing on a laptop or a desktop, then select the Desktop Class option; otherwise, select the Server Class option to install on a server. These options are available on the System Class screen.
There is no difference in the software that gets installed after you select any one option but the Desktop Class option installs a single instance database without the advanced configuration options."
Check
http://docs.oracle.com/cd/E11882_01/install.112/e16763/whatsnew.htm

Remote Desktop and Snow Leopard Server

What is the best way to use Remote Desktop with Snow Leopard Server?
I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
The mac mini server will basically be nothing but a server.
I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

Implies that the DL is hosed and necessitating DLing it again.

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

Hi, Jeff.
I'm not on a network and I didn't change anything on my secutiy setups, so I got in touch to the customer support. They checked my computer and found nothing wrong, so they uploded some log files to analyse the case. I'm waiting for a answer.
Thanks for the tips.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

Since updating to OS X Yosemite, I am unable to save files into another computer or server. I have to save it on my desktop and then drag it into the server. How do i correct this?

Since updating to OS X Yosemite, I am unable to save files into another computer or server. I have to save it on my desktop and then drag it into the server. How do i correct this?

Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

Does one download serve a desktop and laptop

When I purchase Lion from the App store will it, as in the past, work on both my desktop and my laptop? Or do I have to download two times?

You may install on as many computers as you own, but you have to download it directly to each computer. Each computer should have Snow Leopard installed.
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

Desktop and startup shortcuts produce security warning

I have a laptop running Windows 8.1 Pro with all updates installed. It's a domain member and the primary user was using redirected folders which worked well. Due to other reasons, the user's account was removed from the OU linked to with the redirected folders
GPO. open file security warning The GPO was setup for Desktop and My Documents so that when the policy was removed the files would revert to the local PC. For some odd reason the Favorites was not that way but configured to leave them on the server. I discovered
that only after the user's account had been moved out of that OU and the laptop rebooted and the user logged in.
So the user got her desktop and documents folders back just fine. But even though I changed the GPO to revert the Favorites back to the local PC of course it didn't even after I rebooted a few more times. So when the Favorites icon in IE was clicked,
favo0rites were still pointing to the server. I had to go through the registry and change the entries for that user's profile to point to the proper folder on the local PC.
However after I did that then something else showed up. Now when she clicks on the IE shortcut which is pinned to the taskbar or any application shortcut on the desktop or when she logs in and the startup program run, they all produce the Open File - Security
Warning box so she has to click OK for each one. I've tried looking up this problem but none of the fixes work for this case or I'm not going to lower the IE security.
Oddly, the Microsoft Office shortcuts pinned on the taskbar don't produce the security window but open up the program. It only seems to happen with shortcuts to programs that I create. Also I can take those shortcuts, copy them to another folder outside
of the user's profile and there is no security warning. So it's only within the profile that this happens.
Anyone have an idea what is wrong and how to fix it? I don't see how my changing the path to the Favorites folder in a few places in the registry could have done this but I don't see what else since it didn't occur until after I made the registry changes.
Jonathan

Why not use RegShot to capture registry changes after favorites folder was modified.

I saved an application form as a pdf to my desktop and now I can't open it!

Basically, I didn't have access to a printer, so I clicked print and then it presented my application form in a new window (my browser is chrome). Instead of printing (because I couldn't) I saved the file to my desktop and it saved as a pdf. Now if try and open it with adobe it says 'Adobe could not open...because it is either not a supported file type or because the file has been damaged (for example it was sent as an email and wasn't correctly decoded) I read other posts with people having this message but not in this context.
Now I really need to print it and I can't even open it. There's no way of going back in the application process as I can't get hold of the application form online any more.
PLEASE help! This is really important and I might have managed to screw everything up for myself. I tried to open it with chrome instead and that just opens a blank page...
Sincerely, and desperately!
nmlj

Thanks for replying.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
This is what it says - does this mean I'm screwed?

Apple Remote Desktop and controlling over VPN

Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
Thanks

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

KImportXMLFileCmdBoss differencies on Desktop and Server

Similar Messages

Maybe you are looking for