KM4M Problem ( can't get the usb to work anymore).

Hi there people.
My mainboard apparently no longer recognises the USB ports as well as the ethernet one. I am not sure what the problem is, has anyone else experienced this? I had stopped using the PC in December but recently tried to connect it to my peer-to-peer network and found this out.
Cheers.

Moan Guide
If you are having problems with USB ports, read this topic.

Similar Messages

Q: G40, How can I get the USB to work? Error message: go to a srink...

I have a Thinkpad G40 2388 A9G and the computer is running full so I decided to clean up and in that connection I bought a 16 GB SanDisk mini Cruzer to copy files to from the G40 harddisk. However, now I have spend all day to get this to work and it still does not work. When I plug de USB stick in I do see the one of the two drives, namely E: which is the one with programmes, however I do not see F: which I should use as storage. When I click on E I can from there click on F, however then I receive this eror message: This operation has been cancelled due to restrictions in effect on this computer. Go to the sysadm. I do have adminsuitrator rights and other memory sticks work ok on G40 just as weel as the mini cruzer works fine on other laptops. I thought that maybe it is the driver. However the system claims that I have the most recent driver (from 31 january 2001 which I find a bit old). I have checked the websites from windows, Sandisk and Lenovo. On the Lenovo website it is stated that the USB driver is the one I have, however then it is mentioned that it is for Windows 98E. My OS is Windows XP Pro.
I am about to give up, can someone help?? What do I need to do??
Thanks.

Error 1015 points to an unauthorized downgrade of the iOS or a jailbreak and then attempting to restore to an authorized iOS. The person you bought it from likely jailbroke the device. Use Google to fine a solution as we can't help you with jailbroken devices.
Sorry

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

See the following for how much you will have to pay for the exchange.
Apple - Support - iPod - Repair pricing

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

I can not get the debugger to work on oracle studio 12.3 - It will not attach

I can not get the debugger to work on oracle studio 12.3 - It will not attach

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

I can't get the connect to work after base installion.

Hello, everyone, I am new to Arch Linux.
I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
Every thing seem make sense to me during the installation, but I just can't get the network connection working.
BTW: my laptop is a Toshiba portege M100.
Any idea?
Thanks
Last edited by ioky (2008-06-25 06:18:58)

Try typing in:
dhcpcd eth0 (or whatever interface you are using)
and hit enter, I had the same type of problem and this woke up my network connection.
Edit: Also, once you gain your connection up and running, you might want to install ifplugd. It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops. Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
Last edited by ArchGentoo (2008-06-26 01:22:45)

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?

In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
I got my o2 unlock in nov 09 so this is not just opinion.

How can i get the speakers to work properly? they have a lot of static and scratchiness from them

how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

I found my answer in this thread:
https://discussions.apple.com/message/16646999#16646999

How can i get the SSO to work successfully?

How can i get the SSO to work successfully? I followed the note for configuring infoview with ad sso using kerveros & .net.
Adding the AD group into the win ad authentication configuration page creates the user group but the members of the group aren't being pulled in when I go to the group and select / query the users tab

Bart,
By default the setting for update options on the Windows AD tab of authentication does not actually create the aliases until the user attempts to login the first time. We set it this way to prevent a huge group of alias's being created when the administrator sets up Windows AD and also so that only user aliases for users actually using the system get created. You can change this behaviour though if you like. Simply change the radio button option to 'New Aliases will be added and new users will be created' this will create the accounts for you when you hit the update button. If you have a large group your adding I would wait until and afterhours time when you have less activity as this will impact CMS performance while it creates all the accounts.

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Satellite A210-11P - can't get the Camera to work

Hey
i have the Satellite A210-11P and i just can't get the Camera to work on it,
it will yurn on for two seconds and then shut itself off and 'No Preview' Appears.
Any help on this would be greatly appreciated.
Kris

Hi,
Have you tried you to reinstall/update it? Download camera assistant from [Toshiba driver page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Remove the previous one and restart the laptop. Then, install downloaded one

HT4623 iPad 3 how can l gets the SIM card works With iPad 3

As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

TS3274 How can I get the volume to work?

We have an iPad but can't get the volume to work?

Alright now if you are talking about issues using Safari, here a few things that you can try.
1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

KM4M Problem ( can't get the usb to work anymore).

Similar Messages

Maybe you are looking for