KNOWN BUG????  data action changing to data page when reload of JDev

Hi All,
i'm using jdev 10.1.2, adf bc's, struts, jsp's.
I have a data action on my struts page which is bound to a method in the app module. I created a class for this data action which overrides the initialMethodParameters() method and gets the arguments for the method in the app module.
it all works perfectly fine, until i shut down JDev and load it up again. The data action has now turned into a data page. if i dbl click on it i get the create page dialog, instead of the data action class. obviously when i try run this data action, i get cannot display this page error.
I'm assuming/hoping that this is a bug. can anyone shed any light??
Thanks in advance,
Liz

Hi,
did you open this in the same version of JDeveloper 10.1.2? I remember that there was a change in Struts between JDeveloper versions
Frank

Similar Messages

  • 'Date Created' changes to 'Date Modified'

    When I modify pics using Picasa and then export them to a new folder, 'Date Created' changes to be the same as 'Date Modified'. Is this a bug? When I look at the exported pic info in Picasa, the Date Created is still correct, but when I view the same pic in Finder, the Date Created is now the same as Date Modified. But when I look at the original pic before Picasa copied it into the new directory, it has the correct Date Created. Is it possible that Picasa somehow screwed up the file info when it exported?

    Update to this. I found this info in forum:
    "A digital image file has two 'creation' dates, the date the image was captured by the digital device (cameras, scanner, etc) and the date the image file was created on the HD."
    The problem seems to be that when I don't modify an image in Picasa, the date captured remains the date created as far as finder is concerned. However, when the image is modified (eg shadow increased), 'date captured' becomes 'date created to HD'.
    So apart from this being nuts, how can I get Finder, and therefore AppleTV, to sort and play by original image capture date created?
    This might also be an AppleTV question.

  • Acrobat X Standard Bookmarks - How do I make the Zoom Level action default to "Fit Page" when combining to one pdf?

    Acrobat X Standard Bookmarks - How do I make the Zoom Level action default to "Fit Page"?
    When I combine multiple pdf files into a single binder, Acrobat creates a bookmark for each file.  In the properties for each bookmark, there is an action created to go to the page in the document and has the zoom level at "fit width".  Question is, how do I change this apparent default zoom level to "fit page" when Acrobat creates the bookmarks when combining the pdf files?

    Is there a way to do it in one step instead of individually on each bookmark?  This gets VERY cumbersome when I have upwards of a hundred bookmarks to change.

  • How do I change the default page when I open a new tab or window?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/872056]]</blockquote>
    I recently downloaded a piece of software to translate languages. I removed the software, but remnants still appear. It changed my homepages (which I was able to change back). But, when I open a new window or tab, the search page associated with this software comes up.

    See:
    *http://www.babylon.com/support/faq/usage.html#22
    *[[/questions/746530]]

  • Data is missing in Even Page when report running in background (spool)

    Hi
    I have this weird problem in my report. The report would run in background convert the data in to PDF from spool and then email it to people.
    Now when the PDF has more then 1 page the error occurs.
    It drops the last row from the even page. The total at the end and every thing shows correctly. If there r more than 2 pages then on page 3 the last row is not dropped and its all fine but again on page 4 it drops one record and on page 5 again its working fine.
    One thing is it also puts an extra line(horizontal line which is not in the code) on those pages where its unable to put the record and its always the last one on the even page. I also looked up the spool. Its doing it in the spool too. So i think its not the PDF converter its when the spool is getting created for some reason its droping the rows for the even pages...
    Did any one else encountered some thing like this? please help.
    Thanks
    Message was edited by:
            Anwarul Kabir

    is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
    Please Help!

  • Using Update data action to update data in job data component

    hi, I'm trying to update data in job component using CI_JOB_DATA, im setting action as updatedata. but i'm getting error.
    "UPDATEDATA - updating existing keyed child records
    Example - updating an existing row of data by using the key value(s) and enough child fields to single out the distinct record. "
    Is the above statement correct?

    For example ExceltoCi uses ComponentInterfaces to load data.
    Snipet from PeopleBooks:
    PeopleBooks > PeopleTools 8.52: PeopleSoft Component Interfaces > Using the Excel-to-Component Interface Utility
    UpdateData.
    Use this option to update specific non-key values that already exist. The system uses the keys to locate the row, and when a match is found, the row is updated with new data. If a key match is not found by the system, it displays an error message indicating which collection was missing a key match.
    When using the UpdateData action, you must provide all keys for the collection for the system to modify the data.
    Note. If you want to insert an effective-dated collection at Level 1 containing a child collection at Level 2, you may need to use UPDATE to insert the parent row at level 1 and then use UPDATEDATA to insert the child row at level 2. This is because child rows are copied forward from the current effective-dated collection as a result of the insertion of a new effective-dated parent row. These child rows will be updated by the component processor with the new effective date, and may have the same level 2 keys as the Level 2 child row that you are trying to submit from ExcelToCI.

  • How to change the begin page when you open a tap ?

    ive downloaded by accident a toolbar, then i uninstall it from my computer but then when i opened firefox it became my start page so i changed it back to what is was but then i opende a tab en there it was again how can i change this to normal again ?

    Hi,
    You can try to right-click and '''Reset''' the '''browser.newtab.url''' key in [http://kb.mozillazine.org/About:config about:config].
    [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    If the problem persists please see [https://support.mozilla.org/en-US/kb/removing-babylon-searchqu-or-mystart Removing Babylon, SearchQU or MyStart].

  • How to change the opening page, when we open a new tab?

    When I open a new tab, it opens the babylon search (which is annoying). How to change it to the thumbnail view showing most visited pages?
    PS: I have not installed anything Babylon related to my PC. I checked the control panel nothing Babylon related is there.

    Hi,
    You can try to right-click and '''Reset''' the '''browser.newtab.url''' key in [http://kb.mozillazine.org/About:config about:config].
    [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    If the problem persists please see [https://support.mozilla.org/en-US/kb/removing-babylon-searchqu-or-mystart Removing Babylon, SearchQU or MyStart].

  • Bug that opens loads of help pages when you go to Blending Options (CS4/5/6) ?

    Does anybody else have an issue that has happend since cs4 that is sometime when you open up the Blending Options window (I normal just double click a layer) photoshop will open around 10-20 photoshop help pages in my browser!!

    You need to provide exact system info. This is not normal, but who knows, some input device driver for a tablet or a configurable mouse could send some wrong signals or a misconfigured graphics setup cause a wrong click area to be registered...
    Mylenium

  • BUG? Data Action on Struts changing to Data page when i reload Jdev????

    Hi All,
    i'm using jdev 10.1.2, adf bc's, struts, jsp's.
    I have a data action on my struts page which is bound to a method in the app module. I created a class for this data action which overrides the initialMethodParameters() method and gets the arguments for the method in the app module.
    it all works perfectly fine, until i come into work the next day, load up JDev and the data action has now turned into a data page. if i dbl click on it i get the create page dialog, instead of the data action class. obviously when i try run this data action, i get cannot display this page error.
    I'm assuming/hoping that this is a bug. can anyone shed any light??
    Thanks in advance,
    Liz

    Hi,
    did you open this in the same version of JDeveloper 10.1.2? I remember that there was a change in Struts between JDeveloper versions
    Frank

  • Add a Data Action to Execute a Method - Problem

    Hi,
    I'm working with JDeveloper 10.1.3 - JSP,Struts and ADF BC.
    I have a method that retruns 2 values (audit(Number,Number)) and exposed the Service Metod, but now I need to add a Data Action to Execute that method.
    I already add an Data Action icon to my Page Flow Diagram but what do I need to do next?
    Can anyone help me? Any ideias?
    Thanks,
    Micaela

    Hi Shay,
    I have one problem because how can I create a JSP Page to display Method Results in JDeveloper10.1.3???
    I already created another page and tried to Drag and Drop my Method from Data Control Palette, but I only have the choice to create a button and I would like to see the result.
    Adding a c:out tag to the JSP page.
    Can you help me with this problem??
    Thanks,
    Micaela

  • Change hiring date

    Some persons are hiring date is wrong and  their payroll is run . How this date can be change.

    1) if your correct date of hire IS BEFORE current date in system
    then you can blank IT 0003 fully (dont forget to take printscreen of IT 0003)
    do pa41 - change the start date
    make IT 0003 how it was before
    2) if your correct date of hire IS AFTER current date in system
    then you can resign the employee , now cahnge start date by PA41
    and delete the resign action which will make him active again. this is risky
    SAP has given in note to create 2 new action to achive this
    correct action
    change incorrect data
    you can implement these 2 actions to  achive your work
    search on NOTES - In SAP NOTE SAP has explained this all
    Thanks
    Jaydeep jadhav

  • In iPhoto 11 changing the Date and Time EXIF becomes Garbage?

    Hi- the new photo date I choose for a photo (say 1946) turns into garbage after saving - like 1165 or 1492- ( and Columbus would be suprised).
    Detail: About 5 years ago in Windows PC in  XP folders  I scanned old family pics into folder for 1946 and all was well= until few months back in 2011 I crossed over to Mac Book Air and  iPhoto 11.
    However iphoto  doesnt care for file name- Its sorts all in event date based on scan date- exif date-  embedded by the scanner when I did it. OK. Smarter.
    So to change its date I select each photo in iphoto11- then  select "change date" and changed the date what I want it to say (like   06/06/1946) - and saved .
    Problem. Now it has two dates against it - one date in year 1492 and the other in 1765- .
    I have tried changing the date differently using  the little Up or Down arrows, and its scrolls (eventually!) to 1946 -I  do a save..... and another crazy date turns up-
    Am guessing so its got to be a trick related to the " day counter"- mind you I dont see the pint of telling me that my photo is having its date changed by some quantity of thousands of days- Doh that sounds very Windows like.
    I must be doing it wrong.
    Any experts please?
    Thanks in advance !

    Thanks AppleMan1958, you're right.
    My view was set to Favorites and Unmarked so when I imported the video, rejected parts of it, and THEN changed the date I was unable to see that I wasn't changing the date on the rejected portion. I changed the view to All Clips (in the View menu) and then I could plainly see that the rejected clips still had the current date.

  • Change order date if output for change order

    Hi guys,
             how do i pull the change order date on to the printout only if the output is for change order.I don't know much about change order.i would really appreciate your help.
    Thanks
    Chris

    Hi Cheris,
    Assume you mentioned purchase order change date ?
    Change document date won't be updated in the purchase order header table(EKKO) or purchase order item table(EKPO).Generally all the changes will updated in the CDHDR (Change doument header table ) with Object value <b>OBJECTID</b>( Doument number ex: purchase order ) , User name of the person responsible in change document <b>USERNAME</b> , Creation date of the change document <b>UDATE</b> and etc,..
    In your case consider CDHDR- UDATE filed as change order date. While selecting the updated information from the table make join query bet'n EKKO, EKPO and CDHDR with required combination and show the change order date on the PO printout.
    I hope this will helps for you.Thanks.
    Regards,
    SAP TN.

  • This year master data-previous year transaction data load

    hi guys,
    I support some infocubes where financial data is stored and reported on.our source systems are financial databases.
    now we load transaction data every month-end throughout a year.we load master data(full load) from flatfiles whenever there are changes.whenever we change master data,we include these changes in transaction data infopackage selections,so the transaction data related to new master data will also be loaded.
    now my situation is:
    Now this is June,2010.My boss said I have to reload transaction data for 2009 as there was some changes in rates on which the data was calulated in 2009.Some new rates came in,so they re-calculated 2009 transaction data and sent it to us.Now we have to reload this 2009 data and delete OLD 2009 data from cubes.
    My question---As I am going to re-load 2009 transaction data...but the master data present in system is up-to-date..i.e, June 2010..(its not the same master data of 2009....there were few additions and renamings until today.)...so what do we need to do in this type of situations?
    Also,as I said above,whenever we have changes in master data,we change transaction data infopackage selections so they load transaction data related to this new master data also...so it means Infopackage selections of today donot reflect the infopackage selections of 2009....but we are still trying to reload 2009 transaction data with todays infopackage??
    How do we need to do in these type of situations?Do we just go ahead and load 2009 data with 2010 master data and 2010 infopackage selections........?
    Thanks alot for your patience....
    Rgds.

    we are actually having time-dependent master data....one version of master data for each year ...like for 2005..we have verion 2....for 2006..we have version 3....master data version and to which year they are linked to is maintained in a customised table....
    so coming back to my previous post...
    for 2009...we have version 4....and transaction data was loaded then.....
    for 2010..we have version 5...and transaction data will be loaded at the end of every month...and also we have decided to reload 2009 data because the the rates on which 2009 data was calculated,changed and so our business recalculated that data and sent to us and we have to reload 2009 data and delete OLD 2009 data....
    now my questions...if we re-load 2009 data,today master data is of 2010(version 5)....this is meant for 2010 transaction data loadings....Doesnt it create inconsistencies....or am I thinking too much...is just to go ahead and load....?
    Also the infopackage selections today donot match with infopackage selections of 2009 as there were additions in master data and so we included in selections....Do we need to change back the infopackage selections to 2009 until 2009 re-load is over?
    Hope I explained it better...............
    Thanks alot.

Maybe you are looking for