L2TP | Logon Failure with domain name but success with .local
Hi,
I am trying to use L2TP and failing. When trying within the work LAN using myserver.local it works a treat. When I try myserver.company.co.uk it asks me to log-in then fails with a very brief message giving nothing away.
I managed to get PPTP to work fine (once I had opened the AFP port on my firewalled router) but would prefer to use L2TP. I have seen others are having the same problem but can find no solution to sort it for me.
SETUP:
10.5.6 fully updated server plugged into switch running usual standalone services plus DNS. Netgear ADSL router plugged into switch and providing firewall, DHCP and NAT. Ports open and passing to myserver: 4500 UDP, 500 UDP, 1701 UDP (and 1723 TCP).
myserver.company.co.uk is pointing to our static IP, from our ISPs DNS.
Any help would be appreciated.
Thanks.
I'M NO EXPERT BUT IF YOU ARE USING KERBEROS TO LOG IN AND YOU ARE GETTING GENERIC DNS THROUGH YOUR ISP THEN YOULL HAVE TO USE CHAP TO LOGIN. I DON'T KNOW IF THIS APPLIES TO YOUR SITUATION BUT THOSE ARE ACOUPLE OF THINGS I CAN THINK OF.
BEST,
EMACKIII
Similar Messages
-
"Logon failure: unknown user name or bad password" even with correct Credentials
I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?Hi,
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support -
Can I run 2 different domains with same name but on 2 different machines?
I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
Here is the error in the log -
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
Thanks
SatishYes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names. -
New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.
Hi,
Recently we bought windows server 2008 r2 from myhosting.com . I tried to install office web apps 2013 on this machine. I followed this URL(http://technet.microsoft.com/en-us/library/jj219455.aspx)
to configure office web apps 2013 in the machine. After installed the office web apps 2013, I created the Office Web Apps 2013 Server farm in the machine using power shell command.
New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnabled
When I run the command on power shell I got the below error
New-OfficeWebAppsFarm : Logon failure: unknown user name or bad password.
At line:1 char:1
+ New-OfficeWebAppsFarm –InternalURL "http://vps1141344" –AllowHttp -EditingEnable ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-OfficeWebAppsFarm], AuthenticationException
+ FullyQualifiedErrorId : System.Security.Authentication.AuthenticationException,Microsoft.Off
ice.Web.Apps.Administration.NewFarmCommand
Please help me some one to fix this issue.
Thanks,
Nattuthurai
Nattuthurai.Khi, I encountered the same error with you,
i resolved the issue with following steps:
1. add you Office Web Apps server to domain;
2. login Office
Web Apps server as domain user;
3. run power shell as administrator;
4. run shell command;
5.success.
白云谦逊的站在天之一禺,晨光给他带上了彩霞。。。 -
EffectiveUserName Logon failure: unknown user name or bad password
Hi
I am trying to connect Sharepoint 2013 services (performancepoint , excel services) to SSAS 2012 using the EffectiveUserName.
I was getting a error message regarding conencting the datasource and when checking profiler it was saying Logon failure: unknown user name or bad password.
On the SSAS server i tried using EffectiveUserName in the additional Connection Parameters and it failed for the above reason. I also tried my username as well as the sharepoint service account
the sharepoint service account and my username are both server admins.
When I try using the EffectiveUserName in the additional Connection Parameters on another server I can connect with no problems.
What seems to be the different with server where I am getting the error message?
RegardsHi aivoryuk,
According to your description, you get the "unknown user name or bad password" error when using EffectiveUserName in Connection parameter to connect Analysis Services. Right?
In this scenario, if you use a connection string to create the data connection, and the connection string contains an effective user field, the EffectiveUserName feature will override the user-supplied effective user value with the system-supplied value.
On this server, you may use a domain user to run the SSAS. So it will show the "unknown user name or bad password." However, on the other server, it may use system build-in account to run SSAS. Please refer to link below to check the steps for using
Analysis Services EffectiveUserName in SharePoint Server 2013:
https://technet.microsoft.com/en-us/library/jj219741(v=office.15).aspx
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support
Hi thanks for the link but it just shows how to set effective user name in sharepoint which I know how to do.
In SSMS and when I connect to the SSAS server and I select options and then I go to the addional connection parameters tab i set Effectivename ="domain\username" on once server I get the error mesage but on the other I don't.
I'm not clear from you explanation as to why this is?
Regards -
Logon failure: unknown user name or bad password.
Hai,
I am trying to move the file from application server to folder in non-sap server using DOS commands in a batch file.
Commands in the batch file is below.
E:
cd E:\HSBC\HSBC_IN\
for /f %%a IN ('dir /b *.xml') do (
move %%a
host name\HSBC\Temp
exit;
I have created a command in SM69(E:\HSBC\hsbc.bat) and trying to execute, it is properly executing in Development server and file is moving. Same is not executing in Quality server. Its giving an error as Logon failure: unknown user name or bad password. External program terminated with exit code 1. For that destination folder i have given permission for both Delelopment server and Quality server.
Please help on this issue with high priority .
<priority is downgraded>
Thank you.
Edited by: Suhas Saha on Sep 12, 2011 2:52 PMHi,
May be my suggestion is a stupid one but still you can just look into it if nothing works out.
See the non-SAP server you are mentioning here, should also be same type I mean if you are moving file from SAP-DEV then the non-SAP server also should be of type DEV, SAP-Quality to Non-SAP Quality etc
Check this. -
Two methods with same name but different return type?
Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
System.out.println("Failure");
//call first method - displays stack trace on screen
showerr(NPe);
//call second method - returns stack trace as string
String msg = showerr(NPe);
System.out.println(msg);
} // end of main
public static void showerr(Exception e){
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
try{
pw.close();
sw.close();
catch (IOException IOe){
IOe.printStackTrace();
String stackTrace = sw.toString();
System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
try{
pw.close();
sw.close();
catch (IOException IOe){
IOe.printStackTrace();
return sw.toString();
}//end of second showerr
} // end of class
[\code]Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
public String buildError(Exception e){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( e.getClass().getName() )
.append( " : " )
.append( e.getMessage() ) ;
return buffer.toString() ;
public String buildError(String msg){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( msg ) ;
return buffer.toString() ;
public String buildErrors(int errCount){
java.util.Date now = new java.util.Date() ;
java.text.DateFormat format = java.text.DateFormat.getInstance() ;
StringBuffer buffer = new StringBuffer() ;
buffer.append(format.format(now))
.append( " : " )
.append( "There have been " )
.append( errCount )
.append( " errors encountered.") ;
return buffer.toString() ;
}Make sense ???
Regards, -
Hi,
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
This is the CM Log
1) Exception Information
Exception Type: System.Runtime.InteropServices.COMException
ErrorCode: -2147023570
Message: Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
Data: System.Collections.ListDictionaryInternal
TargetSite: Void ThrowExceptionForHRInternal(Int32, IntPtr)
HelpLink: NULL
Source: mscorlib
StackTrace Information
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Clm.Security.Principal.LoggedOnUser.Logon(String userName, String password)
"2014-04-16 02:48:50.98 -07" "Microsoft.Clm.Security.Principal.RevertToSelfContext"
"Microsoft.Clm.Security.Principal.RevertToSelfContext RevertIfImpersonating()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Reverting to the process identity
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en-US.resx] for culture: en-US? False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en.resx] for culture: en? True
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Void Application_BeginRequest(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Web UiCulture: en-US. Web Culture: en-US
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Mapping path: [error.aspx]
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx] was not found in the configuration section.
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx], filtered: False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Principal: System.Security.Principal.WindowsPrincipal, Identity: System.Security.Principal.WindowsIdentity
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Custom Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
Ticket:
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
ThanksOn Wed, 16 Apr 2014 10:15:55 +0000, Priyesh92 wrote:
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
1. Make sure that you've got all of the required Kerberos delegation
settings and SPNs setup correctly.
2. Make sure that you've added the portal to Trusted Sites in IE and that
you configure the security settings to for Trusted Sites to log on
automatically.
3. Make sure that you have the password for the CLMWebPool account set
correctly.
Paul Adare - FIM CM MVP
But these are not inherent flaws in [NT]. They are the result of deliberate
and well-thought-out efforts. -- M$ Spokesweenie -
Windows Security Error! Logon failure: unknown user name or bad password
We RANDOMLY can't access one of the computers in our company's network. It is now saying - Windows Security - Logon failure: unknown user name or bad password. It doesn't matter what I put in for a user name and pw it still doesn't work.
Any help is much appreciated!To be added, if it is part of domain, is this computer had local account? If so, try to logon local account for test, If sucessfully, follow Cyber's suggestion remove PC from domain and rejoin it for test.
If not, you can try to boot system into recovery mode and choose recovery computer for test.
Press F8 at startup, then choose Recovery system.
Roger Lu
TechNet Community Support -
I'm connecting to a MS Exchange server (internally) but I'm getting the following error:
........Non SSL........
POP3: connecting to host "xxxx.xxx.com", port 110
S: +OK Microsoft Exchange POP3 server version 5.5.2658.25 ready
C: USER [email protected]
S: +OK
C: PASS
S: -ERR Logon failure: unknown user name or bad password.
C: QUIT
S: +OK Microsoft Exchange POP3 server version 5.5.2658.25 signing off
test2 :: javax.mail.AuthenticationFailedException: Logon failure: unknown user name or bad password.
I can get my email using Outlook because I don't have to provide a password to connect. So I left it blank in my program but I still can't
login. Does this mean that I need to use the authenticator class?
Here's the code I'm using to connect:
public class ListMailSubjectLines
private static void ListMailSubjectsLines()
try
Properties pop3Props = new Properties();
Session session = null;
Store store = null;
pop3Props.put("mail.pop3.host","xxxx.xxx.com");
pop3Props.put("mail.user","[email protected]");
pop3Props.setProperty("mail.passwd","");
// String host = "";
// String username = "";
// String password = "";
if((pop3Props.getProperty("mail.pop3.ssl") != null) && (pop3Props.getProperty("mail.pop3.ssl").equalsIgnoreCase("true")))
System.out.println("........SSL........");
String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory";
pop3Props.setProperty("mail.pop3.socketFactory.class", SSL_FACTORY);
pop3Props.setProperty("mail.pop3.socketFactory.fallback", "false");
String portStr = ((pop3Props.getProperty("mail.pop3.port") != null) ? pop3Props.getProperty("mail.pop3.port") : "110");
pop3Props.setProperty("mail.pop3.port", portStr);
pop3Props.setProperty("mail.pop3.socketFactory.port", portStr);
URLName url = new URLName("pop3://"+pop3Props.getProperty("mail.user")+":"+pop3Props.getProperty("mail.passwd")+"@"+pop3Props.getProperty("mail.host")+":"+pop3Props.getProperty("mail.pop3.port"));
session = Session.getInstance(pop3Props, null);
store = new POP3SSLStore(session, url);
else
System.out.println("........Non SSL........");
session = Session.getInstance(pop3Props, null);
store = session.getStore("pop3");
session.setDebug(true);
store.connect(pop3Props.getProperty("mail.host"), pop3Props.getProperty("mail.user"), pop3Props.getProperty("mail.passwd"));
//store.connect(host, username, password);
Folder folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message[] Msgs = folder.getMessages();
for(int i = 0; i < Msgs.length; i++)
System.out.println(Msgs.getSubject());
folder.close(true);
store.close();
System.out.println(Msgs[0].getSubject() + "test");
catch(NoSuchProviderException ec)
System.out.println("test1");
catch(MessagingException em)
System.out.println("\ntest2 :: " + em);
public static void main( String args[] )
ListMailSubjectsLines();
Thanks,
ls6In case anyone wants to see the format and the final code here it is:
Login name format:
pop3Props.setProperty("mail.user","TEST_DOMAIN\\UserID\\mailboxID");
Code
import com.sun.mail.pop3.POP3SSLStore;
import javax.mail.URLName;
import javax.mail.Session;
import javax.mail.Store;
import javax.mail.Folder;
import javax.mail.Message;
import javax.mail.NoSuchProviderException;
import javax.mail.MessagingException;
import java.util.Properties;
public class ListMailSubjectLines
private static void ListMailSubjectsLines()
try
Properties pop3Props = new Properties();
Session session = null;
Store store = null;
pop3Props.put("mail.pop3.host","mailHOST");
pop3Props.setProperty("mail.user","TEST_DOMAIN\\UserID\\mailboxID");
pop3Props.setProperty("mail.passwd","passWord");
if((pop3Props.getProperty("mail.pop3.ssl") != null) && (pop3Props.getProperty("mail.pop3.ssl").equalsIgnoreCase("true")))
System.out.println("### SSL ###");
String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory";
pop3Props.setProperty("mail.pop3.socketFactory.class", SSL_FACTORY);
pop3Props.setProperty("mail.pop3.socketFactory.fallback", "false");
String portStr = ((pop3Props.getProperty("mail.pop3.port") != null) ? pop3Props.getProperty("mail.pop3.port") : "110");
pop3Props.setProperty("mail.pop3.port", portStr);
pop3Props.setProperty("mail.pop3.socketFactory.port", portStr);
URLName url = new URLName("pop3://"+pop3Props.getProperty("mail.user")+":"+pop3Props.getProperty("mail.passwd")+"@"+pop3Props.getProperty("mail.pop3.host")+":"+pop3Props.getProperty("mail.pop3.port"));
session = Session.getInstance(pop3Props, null);
store = new POP3SSLStore(session, url);
else
System.out.println( "### Non SSL ###" );
session = Session.getInstance( pop3Props, null );
store = session.getStore( "pop3" );
//System.out.println(session.getStore());
session.setDebug( true );
store.connect(pop3Props.getProperty( "mail.host" ), pop3Props.getProperty("mail.user"), pop3Props.getProperty("mail.passwd"));
if( store.isConnected() )
System.out.println( "\nCONNECTED\n" );
Folder folder = store.getDefaultFolder();
folder = folder.getFolder( "INBOX" );
folder.open( Folder.READ_WRITE );
Message[] Msgs = folder.getMessages();
for( int i = 0; i < Msgs.length; i++ )
System.out.println( Msgs.getSubject() );
folder.close( true );
store.close();
Folder folder = store.getFolder( "INBOX" );
//Folder folder = store.getDefaultFolder();
//folder = folder.getFolder( "INBOX" );
folder.open( Folder.READ_ONLY );
Message[] Msgs = folder.getMessages();
for( int i = 0; i < Msgs.length; i++ )
System.out.println( folder.getUnreadMessageCount() );
System.out.println( Msgs[i].getSubject() );
System.out.println( Msgs[i].getContentType() );
System.out.println( Msgs[i].getSize() );
folder.close( true );
store.close();
catch(NoSuchProviderException nSPE)
System.err.print( "### Line[88] ### " );
System.err.println( nSPE );
catch(MessagingException mE)
System.err.print( "### Line[93] ### " );
System.err.println( mE );
public static void main( String args[] )
ListMailSubjectsLines(); -
Intel vPro with wired 802.1x issue with domain name
Hello guys,
this issue is may not related to SCCM directly, but intel forums are really poor so i´d like to ask here...
The Case: We are currently provisioning our vPro chips with SCCM SP2 R3 and almost everthing worked as expected (Provisioning OK, OOB Console OK, PowerControl OK even TLS and Kerberos are working. But there is an issue with the 802.1x authentication. It
seems the vPro chips are not using the correct domain name. Lets say our DNS domain name is
vpro.com and the NETBIOS Name is coprvro . There are no child or other domains. vPro chips are presenting now
vpro\COMPUTERNAME$iME instead of vpro.com oder corpvro
so the Radius Server (Windows Server 2008 R2 - NPS) is saying ReasonCode 7 "...domain is not existing...". AuthenticationType and EAP Type are correct. Usually user- and computeraccounts are using
corpvro as domain name.Hi Dan,
thank you for your reply. I've already done this in the second place using the SDK and winrm ($8021XProfileInstance.GetProperty("Domain")). I've no idea were SCCM is getting this domain name from. Its cutting off the top level domain extension,
may be SCCM is assuming that this equals the NETBIOS domain name but that is not the case. This is only a guess, in detail I need to know in fact on what basis SCCM is choosing the domain name, then i can fix this...
Intels SCS putting the correct NETBIOS domain name in the amt config, used certificates are the same... -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back
I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps -
Get the pc name with domain name and add it to my properties file using commands
i want to get the pc name with domain name and add it to my properties file using powershell .
sidfunction Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯ -
I need some help on my MAC about them problem that I have and the question is: My PC cannot find my MAC and it ask a question about putting in the password and I did it come back and said: Logon failure: unknown user name or bad password.
Thank You
LumpyYou have to explain a little more fully what you are trying to do and what protocol. Whats your set up?
Maybe you are looking for
-
Two active alarms at same time freeze the phone
I have z10 STL100-1 with the latest OS 10.3.1779. there is no problem with single alarm. But, if there is two alarms, for example at 10:30 and 10:32. And if I am not so quick to turn off or snooze the first alarm, at 10:32 my phone freezes - dims the
-
Dear community, I have a Thinkpad T430 and I want to use two external monitors. The Thinkpad T430 has just one mini Displayport and I do not want to use the VGA port. So I thought about buying a docking station. But there are several ones. I just nee
-
Why does my macbook pro 15 inch mid 2012 only charge to 97%?
Whenever my macbook pro is plugged in on max battery (The power cable sign on the battery icon), it displays as only 97%. Anyone have an idea why?
-
Is it possible to run two different version of jre simultanously ?
My client is using two diffrent application those supports two different versions of jre(1.2 & 1.4). If he uses jre1.2 only one application works ,and if he uses jre1.4 then the other works but the 1st shows error messege And vice versa. Is there any
-
So I have an iPhone 4 and have been waiting for the iPhone 5 to eventually come out. I want to have it on release date so just wondering what the best choice is to guarantee it on release date. Preordering it straight away on O2 website, or queue out