L8 Bug: Quantize value display

Is this a bug:
The new Piano Roll Editor displays the currently selected quantize value (FINALLY !) . In L7 you always had to click hold on the "Q" button to see it. That is all good.
BUT
if you use the key command to select the next or previous quantize value, that display doens't get updated and therefore displays the wrong value.
Example
1) Set the popup menu to 16th
2) Use the select previous quantize value key command
3) The popup menu still displays the 16th
4) When you open the popup menu, it has the correct 12th value selected.
Any confirmation on that?

I found the problem:
The "Link" button in the Mixer window affects what channel strips are displayed in Arrange mode:
*Arrange button + Link button on*: displays all tracks from the Arrange window minus the hidden tracks
*Arrange button + Link button off*: displays all tracks from the Arrange window regardless if they are hidden or not.
Although it works, I'm not sure if that is the most intuitive GUI solution for that feature.

Similar Messages

BUG: Info panel displays incorrect Hue values

Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
Here's the bug report submitted for this issue:
Product name: Fireworks
Product Version: 12.0.0.236
Product Language: English
Your operating system: Mac OS 10.6.8 (Intel-based)
******BUG******
Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
Steps to reproduce bug:
In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
Observe the Hue values displayed in the Color Mixer and Info panels.
Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
http://forums.adobe.com/thread/1083391
This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).

I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.

Asset explorer -Wrong value displayed after retirement of an asset.

Hi All,
We have posted a settlement from AUC to Assetas 30.11.2009 .The amount settled is a negative amount (-100) .The asset value is for ex : Rs100 and after settlement the asset value is Rs 90.
Then we had made retirement to that asset of Rs 10(positive value) using tcode FB01 and TTY 20A.Then the asset value should reflect as Rs 100 again.
I am not sure why the system now displays asset value as Rs 100 +Rs 10(retirement - positivevalue) = Rs 110 as asset value.
However system should do Rs100 +(Rs -10) +Rs10=Rs100 as asset value in asset explorer.However it displays amount as Rs 110.
Please advice where do i correct to get the values displayed correctly in asset explorer.
Regards
Rekha

hi
first implement notes 988238, then please recaculate the values.
Blaz

Document Summary, wrong values displayed for not persistent prompt

Some prompt values displayed on the document summary portion of the document properties area are displaying incorrect values.
It looks like non persistent prompts are showing the value of the prompt listed just before the non_persistent prompt, instead of the value entered by the user.
eg: persistent prompt 'enter code', user enters 1234
non persistent prompt 'enter date', users enters 1/2/2008
display in document summary:
code - 1234
date - 1234
Is this a known issue with Webi? I imagine it is not an issue with the report, but if so, please let me know if there is something I can do to correct it.
Thanks!

HI Nilanjan,
Thanks for your suggestions but i do not have any data in Apshell to test if it is being displayed correct or not.
Please advice me further.
Regards,

How to restrict values displayed using a select-options

Can someone please tell me how to restrict values displayed using a select-options.
Example- in my table I have 100 entries. However when the user will click on the required field- I want to be display only 25 options based on a given value of another field in the table.
Thanks,
Mahesh.

get the screen value for the selectd field using the fm
DYNP_VALUES_READ.
for that value filter the internal table values and pass the table to f4 help of the field.
below code will help u
write the f4 help for the field.
At Selection Screen on value request                                *
F4 help for Corporate
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CORP.
Get Corporates for selected division
PERFORM GET_CORP.
PERFORM F4HELP_CORP.
*&      Form GET_CORP
Get the corporates for the selected division
There are no interface parameters to be passed to this routine
FORM GET_CORP .
Table for conglomerate
DATA:
    LT_CONG      LIKE STANDARD TABLE OF FS_CORP,
Fields of current screen
    LFS_DYNPREAD TYPE DYNPREAD,
Table for current Screen fields
    LT_DYNPREAD LIKE STANDARD TABLE OF LFS_DYNPREAD.
LFS_DYNPREAD-FIELDNAME = 'P_DIV'.
APPEND LFS_DYNPREAD TO LT_DYNPREAD.
Get selection screen value for division
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME               = SY-REPID
      DYNUMB               = SY-DYNNR
    TABLES
      DYNPFIELDS           = LT_DYNPREAD
    EXCEPTIONS
      INVALID_ABAPWORKAREA = 1
      INVALID_DYNPROFIELD = 2
      INVALID_DYNPRONAME   = 3
      INVALID_DYNPRONUMMER = 4
      INVALID_REQUEST      = 5
      NO_FIELDDESCRIPTION = 6
      INVALID_PARAMETER    = 7
      UNDEFIND_ERROR       = 8
      DOUBLE_CONVERSION    = 9
      STEPL_NOT_FOUND      = 10
      OTHERS               = 11.
IF SY-SUBRC EQ 0.
    READ TABLE LT_DYNPREAD INTO LFS_DYNPREAD INDEX 1.
    IF SY-SUBRC EQ 0.
      P_DIV = LFS_DYNPREAD-FIELDVALUE.
    ENDIF.                             " IF SY-SUBRC EQ 0
ENDIF.                               " IF SY-SUBRC EQ 0
REFRESH T_CORP.
Get the conglomerate for the selected division
SELECT KUNNR                         " Conglomerate
    FROM KNVH
    INTO TABLE LT_CONG
   WHERE HITYP EQ C_HITYP
     AND VKORG EQ C_VKORG
     AND VTWEG EQ C_VTWEG
     AND SPART EQ P_DIV
     AND DATAB LE SY-DATUM
     AND DATBI GE SY-DATUM
     AND HKUNNR EQ SPACE.
IF SY-SUBRC EQ 0.
    SORT LT_CONG BY KUNNR.
    DELETE ADJACENT DUPLICATES FROM LT_CONG
                    COMPARING KUNNR.
Get the corporates for the selected conglomerates
    SELECT KUNNR                       " Customer Number
      FROM KNVH
      INTO TABLE T_CORP
       FOR ALL ENTRIES IN LT_CONG
     WHERE HITYP EQ C_HITYP
       AND VKORG EQ C_VKORG
       AND VTWEG EQ C_VTWEG
       AND SPART EQ P_DIV
       AND DATAB LE SY-DATUM
       AND DATBI GE SY-DATUM
       AND HKUNNR EQ LT_CONG-KUNNR.
    IF SY-SUBRC NE 0.
      CLEAR: SSCRFIELDS.
      MESSAGE I531(0U) WITH TEXT-005.
      STOP.
    ENDIF.                             " IF SY-SUBRC NE 0
ELSE.
    CLEAR: SSCRFIELDS.
    MESSAGE I531(0U) WITH TEXT-004.
    STOP.
ENDIF.                               " IF SY-SUBRC EQ 0
ENDFORM.                               " GET_CORP
*&      Form F4HELP_CORP
F4 help for corporate
There are no interface parameters to be passed to this routine
FORM F4HELP_CORP .
F4 help for corporate
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = 'KUNNR'
      DYNPPROG        = 'Z_EXCESS_USAGE'
      DYNPNR          = '1000'
      DYNPROFIELD     = 'P_CORP'
      VALUE_ORG       = 'S'
    TABLES
      VALUE_TAB       = T_CORP
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS          = 3.
IF SY-SUBRC EQ 0.
Do nothing
ENDIF.                               " IF SY-SUBRC EQ 0
ENDFORM.                               " F4HELP_CORP

BEx Query Analyzer Value Display of +/- Sign

The KeyFigure values in the BEx Analyzer are being displayed as 512.740000000- with a negative sign in the back. I tried to change the settings in Bex Query Designer -- Query Properties -- Value Display to "Before the Number -123.45" setting. It looks like it doesn't have any effect.
Please let me know if I need to change the setting from the backend, we are on BI 7.0.
Venkat

It should work. Try to refresh the query if not come out of Bex and Relogin. This should fix

Select options: Restricting Value Display in Search Help Parameters

Hello friends,
I have following requirement.
I have declared one select option. On that select options I'am having different search help paremeters on which I can restrict the search help values display.
Can I specify the restriction in search help at the time of programming so that it would display only the values that follows the given restriction?
I can ofcourse do this by AT SELECTION-SCREEN ON VALUE REQUEST, however I am trying to avoid this.
How can I proceed?
Points will be rewarded generously.
Best Regards,
Navin

hI
SEE THIS CODE
**************DATA TYPES DECLARATION **********************
TABLES: HRP1001, HRP1026, HRP1000,PCHDY.
TYPE-POOLS SLIS.
TYPES :BEGIN OF ST_OUTPUT,
        COUNT TYPE STRING,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
        BEGDA TYPE HRP1000-BEGDA,
        ENDDA TYPE HRP1000-ENDDA,
        CANCRT TYPE T77CRT-CANCRT,
        AEDTM TYPE HRP1026-AEDTM,
        UNAME TYPE HRP1026-UNAME,
        LSTEXT TYPE HRP1000-STEXT,
       RINVT TYPE T777V-RINVT,
       END OF ST_OUTPUT.
TYPES: BEGIN OF ST_HRP1000,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
       END OF ST_HRP1000.
TYPES : BEGIN OF ST_HRP1001,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-RELAT,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_HRP1001.
TYPES : BEGIN OF ST_HRP1026,
         OTYPE TYPE HRP1026-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         AEDTM TYPE HRP1026-AEDTM,
         UNAME TYPE HRP1026-UNAME,
         DELET TYPE HRP1026-DELET,
         CANCR TYPE HRP1026-CANCR,
        END OF ST_HRP1026.
TYPES : BEGIN OF ST_REASON,
         CANCR TYPE HRP1026-CANCR,
         CANCRT TYPE T77CRT-CANCRT,
        END OF ST_REASON.
TYPES : BEGIN OF ST_SOBID,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-OBJID,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_SOBID.
TYPES : BEGIN OF ST_OBJID,
         OBJID TYPE HRP1001-OBJID,
        END OF ST_OBJID.
TYPES : BEGIN OF ST_LOCATION,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_LOCATION.
TYPES : BEGIN OF ST_LOCATION1,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_LOCATION1.
TYPES : BEGIN OF ST_LSTEXT,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
         LSTEXT TYPE HRP1000-STEXT,
        END OF ST_LSTEXT.
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
DATA : IT_LSTEXT TYPE STANDARD TABLE OF ST_LSTEXT.              "TOS STORE THE TEXT OF COURCE LOCATION
DATA : WA_LSTEXT TYPE ST_LSTEXT.
DATA : IT_LOCATION TYPE STANDARD TABLE OF ST_LOCATION.          " TO STORE THE LOCATION OF COURCE
DATA : WA_LOCATION TYPE ST_LOCATION.
DATA : IT_LOCATION1 TYPE STANDARD TABLE OF ST_LOCATION1.        " TO CONVERT SOBID INTO OBJID FOR COURCE LOCATION
DATA : WA_LOCATION1 TYPE ST_LOCATION1.
DATA : IT_SOBID TYPE STANDARD TABLE OF ST_SOBID.                " TO CHANGE THE SOBID OF HRP1001 TO OBJID OF HRP1026
DATA : WA_SOBID TYPE ST_SOBID.                                   " BY USING FOR ALL ENTRIES
DATA : IT_REASON TYPE STANDARD TABLE OF ST_REASON.              "TO STORE T HE REASON FOR CANCELL TEXT
DATA : WA_REASON TYPE ST_REASON.
DATA : IT_OUTPUT TYPE STANDARD TABLE OF ST_OUTPUT.               "OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT TYPE ST_OUTPUT.
DATA : IT_OUTPUT_1 TYPE STANDARD TABLE OF ST_OUTPUT.               " TEMP OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT_1 TYPE ST_OUTPUT.
DATA : IT_HRP1000 TYPE STANDARD TABLE OF ST_HRP1000.             "DATA FROM HRP1000 TABLE
DATA : WA_HRP1000 TYPE ST_HRP1000.
DATA : IT_HRP1001 TYPE STANDARD TABLE OF ST_HRP1001.             "DATA FROM HRP1001 TABLE
DATA : WA_HRP1001 TYPE ST_HRP1001.
DATA : IT_HRP1026 TYPE STANDARD TABLE OF ST_HRP1026.              "DATA FROM HRP1026 TABLE
DATA : WA_HRP1026 TYPE ST_HRP1026.
DATA : IT_OBJID TYPE STANDARD TABLE OF ST_OBJID.                  " TO STORE THE OBJID OF HRP1001
DATA : WA_OBJID TYPE ST_OBJID.
DATA: WS_FCAT    TYPE SLIS_FIELDCAT_ALV .                         " FEILDCATALOG FOR ALV REPORT
DATA: IN_FCAT    TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_LAYOUT   TYPE SLIS_LAYOUT_ALV.
DATA : LV_COUNT TYPE I.                                           "FEILD FOR SERIAL NUMBER
***************************END OF DATA DECLARATION******************************************
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
*****INITIALIZATION VENT TO ASIGN DEFAULT VALUES TO OTYPE
*INITIALIZATION.
S_OTYPE-LOW = 'D'.*
S_OTYPE-SIGN = 'I'.*
S_OTYPE-OPTION = 'EQ'.*
APPEND S_OTYPE.*
CLEAR S_OTYPE.*
**************END OF EVENT INITIALIZATION******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.*
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.*
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '*
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '*
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0*
             WINDOW_TITLE           =*
             VALUE                  = ' '*
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '*
             DISPLAY                = ' '*
             CALLBACK_PROGRAM       = ' '*
             CALLBACK_FORM          = ' '*
             MARK_TAB               =*
           IMPORTING*
             USER_RESET             =*
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =*
             RETURN_TAB             = RETURN_TAB*
             DYNPFLD_MAPPING        =*
           EXCEPTIONS*
             PARAMETER_ERROR        = 1*
             NO_VALUES_FOUND        = 2*
             OTHERS                 = 3*
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
    ENDIF.
ENDIF.

Table decimal value display is incorrect for a particular user

Hi,
In my VC table value display is showing like .00. Before decimal point values are not coming. I have put disply as 2 decimal. It is hapanning for a particular user. Other users are getting right value. Even we logged on different machine also. please suggest me.
Regards
Rama

Hi,
what is the user's language in his profile and what is the formate of the your field chcek it in the properties of it.
Regards,
Govindu

URGENT!!VALUES DISPLAY IN CHART BARS & COLOR THEMES !!

hi
I want the chart to be displayed with the their values but u can see the values only by rolling over each bars.
Could anyone help me out what are the solutions to be carried out???Is there any options in the EP itself to enter the values displayed automatically when execting it????
what about the color themes to be changed for each bars as per user requirement in EP???
THNX
RAJ.

hi Raj,
Few options:
1. if you are using query designer to create query and displaying it in the web analyser and choose graph there, you cant really change the colors of the graphs.
In that case you have to create the web template in the WAD for the same query in BI and make color selections in the graph control in WAD.
2.If you dont want to use WAD, you can use visual composer and try out various options of its chart control. you also have animations possible in visual composer. VC is totally in EP and you dont have to do much on BI except for the query creation.
hope it helps..

When the combobox is rendered all the values displayed look like [object Object].

I wasn't sure where to post this so please forgive me.
I am trying to populate a combobox with a series of values
returned from a Coldfusion method that retrives a resault froma
database. Basically all the data from a table of staff.
<cffunction name="getUsers" access="remote"
returntype="array">
<cfquery name="q" datasource="#datasource#">
SELECT *
FROM STAFF_CHARTS_STAFF_TEMP
</cfquery>
<cfset aRecordset= querytoarray(q)>
<cfset flash.result=aRecordset>
<cfreturn flash.result>
</cffunction>
<cffunction name="querytoarray" returntype="array"
output="No">
<cfargument name="q" required="Yes" type="query">
<cfset var aTmp = arraynew(1)>
<cfif q.recordcount>
<cfloop query="q">
<cfset stTmp = structNew()>
<cfloop list="#lcase(q.columnlist)#" index="col">
<cfset stTmp[col] = q[col][currentRow]>
</cfloop>
<cfset arrayAppend(aTmp,stTmp)>
</cfloop>
<cfelse>
<cfset stTmp = structNew()>
<cfloop list="#lcase(q.columnlist)#" index="col">
<cfset stTmp[col] = "">
</cfloop>
<cfset arrayAppend(aTmp,stTmp)>
</cfif>
<cfreturn aTmp>
</cffunction>
The result from a call of CF method getUsers is set as the
data provider to ComboBox with id = "cb"
<mx:RemoteObject
id="myService"
destination="ColdFusion"
source="staff_ratings.staff_Ratings-debug.staff"
showBusyCursor="true">
<mx:method name="getUsers" result="handleResult(event)"
fault="Alert.show(event.fault.message)"/>
</mx:RemoteObject>
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
[Bindable]
public var sResult:Array;
public function handleResult(event:ResultEvent):void{
sResult=event.result as Array;
cb.dataProvider=sResult;
]]>
</mx:Script>
However when the combobox is rendered all the values
displayed look like [object Object].
I think the problem is that the result is a array of arrays
so I need to find away to ectract a particular colun of data into
the combobox
How do I fix this?

This is what I did for a single field.
If you were wanting the to have muliple fields in the
dropdown, I would concatenate them in the query.
something like
select fname + ' ' + lname + ' ' + anotherfield as tech from
dbo.table
<cffunction name="getTech" output="no" access="remote"
returntype="query">
<cfset var qTech="">
<cfquery name="qTech" datasource="datasource">
select tech
from dbo.table
group by tech
order by tech
</cfquery>
<cfreturn qTech>
</cffunction>
<mx:RemoteObject
id="dataManager"
showBusyCursor="true"
destination="ColdFusion"
source="cust.components.cfgenerated.Records">
<mx:method name="getMasterQuery"
result="getMasterQuery_result(event)" fault="server_fault(event)"
/>
<mx:method name="deleteItem"
result="deleteItem_result(event)" fault="server_fault(event)" />
</mx:RemoteObject>
<mx:ComboBox id="TECH"
dataProvider="{dataManager.getTech.lastResult}" labelField="tech"
/>

JTable cell color overriding Boolean values displayed as checkboxes. Fix?

I have a JTable column of Boolean values that automatically appear as checkboxes. When I apply my DefaultTableCellRenderer to this column, the checkbox disappears and a "false" or "true" appears instead. But if I mouseclick on the cell, the checkbox will appear momentarily.
Any suggestions for getting the Boolean value displayed as a checkbox and seeing my colors change? (I suppose the easy way is using JCheckBox, but I'm curious if I can do it using Boolean)
Thanks for the help. Code follows for the cell renderer.
class ColorRenderer extends DefaultTableCellRenderer{
public ColorRenderer() {
super();
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
if (isSelected == true) {
setBackground(Color.getHSBColor(100, 100, 1));
setForeground(Color.BLACK);
} else {
setBackground(Color.LIGHT_GRAY);
setForeground(Color.WHITE);
if (hasFocus == true) {
setBackground(Color.RED);
setForeground(Color.WHITE);
setOpaque(true);
setValue(value);
return this;

Wouldn't extend DefaultTableCellRenderer as that extends a JLabel
I would extend a JCheckBox and implement TableCellRenderer.

Smart data value display ? BUG sqldeveloper EA2 but works in plsqldeveloper

Hi,
The below mentioned debug facility works in plsqldevloper but the same does not work in sqldeveloper both on 10g and 11g Oracle Database
Has anyone enocuntered this bug as smart data value / tooltip not displayed in sub proc while debug in
sqldeveloper 3.0.02
tooltip and values are dispalyed during debug in v_var1 but as u debug further to (sub procedure within the main procedure code) i.e procedure test1 ,values of v_var2 not being displayed in tool tip / smart data value until the debugger cursor comes out the sub procedure . Kindly replicate the example shown below in sqldevloper EA2
create or replace
PROCEDURE PROCEDURE1 AS
v_var1 char(20);
v_var2 char(20);
v_var3 char(20);
procedure test1 is
begin
v_var2 := 'this is sub proc' ;
end test1;
BEGIN
v_var1 := 'this is a test';
test1;
END PROCEDURE1;
Any comments/solution will be appreciated
SS
Edited by: user575518 on Jan 17, 2011 11:20 PM
Edited by: user575518 on Jan 19, 2011 9:45 PM

Hi,
The below mentioned debug facility works in plsqldevloper but the same does not work in sqldeveloper both on 10g and 11g Oracle Database
Has anyone enocuntered this bug as smart data value / tooltip not displayed in sub proc while debug in
sqldeveloper 3.0.02
tooltip and values are dispalyed during debug in v_var1 but as u debug further to (sub procedure within the main procedure code) i.e procedure test1 ,values of v_var2 not being displayed in tool tip / smart data value until the debugger cursor comes out the sub procedure . Kindly replicate the example shown below in sqldevloper EA2
create or replace
PROCEDURE PROCEDURE1 AS
v_var1 char(20);
v_var2 char(20);
v_var3 char(20);
procedure test1 is
begin
v_var2 := 'this is sub proc' ;
end test1;
BEGIN
v_var1 := 'this is a test';
test1;
END PROCEDURE1;
Any comments/solution will be appreciated
SS
Edited by: user575518 on Jan 17, 2011 11:20 PM
Edited by: user575518 on Jan 19, 2011 9:45 PM

BUG : FORMS not displaying values stored in FLOAT datatypes.

APEX 2.2.1.
Error occurs on both V9.2.0.4 and V10.2.
I'm working on a "report with form" combination and have been fighting a problem where the data entered into a form will save correctly and show in the report, but when you choose to edit the record to update it, the value will not display in the form at all.
I went round and round, and finally discovered that the problem had to do with the FLOAT datatype being used to store the data.
When creating a default "Report with Edit form" on the following two example tables, the form works correctly with SLA_SCHEDULE2 but not with SLA_SCHEDULE1
CREATE TABLE SLA_SCHEDULE1
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE FLOAT(126),
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
CREATE TABLE SLA_SCHEDULE2
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE NUMBER,
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
The only workaround I have so far is to change the datatype of the column.
Doug

Based on the advice Scott gave above, I've created this function...
CREATE OR REPLACE FUNCTION Get_Float_Value
p_table_name           VARCHAR2,
     p_float_column_name     VARCHAR2,
     p_key_id_name          VARCHAR2,
     p_key_id_value           VARCHAR2
RETURN FLOAT IS
TYPE FLOAT_CURSOR IS REF CURSOR;
f_cur FLOAT_CURSOR;
FLOAT_VALUE FLOAT(126);
SQL_STMT VARCHAR2(500);
BEGIN
     SQL_STMT := 'select :a from :b where :c = :d';
     SQL_STMT := REPLACE(SQL_STMT, ':a', p_float_column_name);
     SQL_STMT := REPLACE(SQL_STMT, ':b', p_table_name);
     SQL_STMT := REPLACE(SQL_STMT, ':c', p_key_id_name);
     SQL_STMT := REPLACE(SQL_STMT, ':d', p_key_id_value);
OPEN f_cur FOR SQL_STMT;
     LOOP
     FETCH f_cur INTO FLOAT_VALUE;
     EXIT WHEN f_CUR%NOTFOUND;
     RETURN FLOAT_VALUE;
     END LOOP;
     RETURN NULL;
END Get_Float_Value;
This allows you to call the function ANYWHERE you use a FLOAT, without having to create one function per table/column you might need to use it against.
I know that I could have used a 'USING' statement on the cursor to do the replacements, but I always find it easier to debug replacement values using the REPLACE function.
Doug

4.2.1 Bug: Current values of child cascading LOVs are LOST.

Hello, ApEx Team!
This bug affected 4.1.1 and 4.2.1 but with different behavior. It seems that someone was trying to fix it.
According to docs "whats new in 4.1" a value of refreshed child cascading lov is derived from default value settings of select list.
Please follow these steps to see the bug.l builder-work done for you here http://apex.oracle.com/pls/apex/f?p=14110:1
1.Create primary select list P1_SEL1.
Display null value: Yes
LOV definition:
    select 'aaa' name,'a' id
      from dual
     union all
    select 'bbb' name,'b' id
      from dual
     union all
    select 'ccc' name,'c' id
      from dual2.Create child select list P1_SEL2.
Cascading LOV Parent Item: P1_SEL1
Page Items to Submit: P1_SEL2 (I strongly believe that this item should be submitted automatically along with Parent Item)
Display Null Value: Yes
LOV definition:
    select 'aaa' name,'a' id
      from dual
     union all
    select 'bbb' name,'b' id
      from dual
     where :P1_SEL1 in ('b','c')
     union all
    select 'ccc' name,'c' id
      from dual
     where :P1_SEL1 in ('c')
Default: return :P1_SEL2;
Default Value Type: PL/SQL Function Body3.Run app. and manually change P1_SEL1 and P1_SEL2 to 'bbb'.
4.Manually change P1_SEL1 to 'ccc'.
h2.
In apex 4.1.1..
you see that P1_SEL2 is resetted to NULL automatically. The value of P1_SEL2 is LOST. Although I tell apex to submit P1_SEl2 value to set its session state, but the session state still remains NULL.
The session state of P1_SEL2 is always NULL and I have no idea how to set it as it is set in a browser at the moment of changing parent LOV P1_SEL1.
h2.
Now apex 4.2.1.
It seems this bug is fixed. Indeed it is NOT fixed.
To see this bug in 4.2.1 just...
5.Create a third child select list P1_SEL3 which depends on P1_SEL2.
Cascading LOV Parent Item: P1_SEL2
Page Items to Submit: P1_SEL3 (Again, I hope you will always submit current item automatically as you do for the parent item)
Display Null Value: Yes
LOV definition:
    select 'aaa' name,'a' id
      from dual
     union all
    select 'bbb' name,'b' id
      from dual
     where :P1_SEL2 in ('b','c')
     union all
    select 'ccc' name,'c' id
      from dual
     where :P1_SEL2 in ('c')
    Default: return :P1_SEL3;
    Default Value Type: PL/SQL Function Body6.Run app. again. Manually set P1_SEL1, P1_SEL2 and P1_SEL3 to 'bbb'.
7.Change P1_SEL1 to 'ccc' and see the bug:
1) P1_SEL2 is reset to NULL for just a short time and than restored to 'bbb'.
2) P2_SEL3 is reset to NULL. So the session state was NULL for this item at the moment of calculating default value. As a result the value of child cascading lov is LOST.
So this bug is still present in 4.2.1.
Can I hope to get workaround for this problem in 4.1 and 4.2?
Thank you,
Vladimir
Edited by: vgoncharov on 17.12.2012 19:37
Edited by: vgoncharov on 17.12.2012 22:45

Good to hear this is already being worked on.
When we tried to work around the "Automatic detection" bug - changing the "Application Language Derived From" to "Application Preference" or "Session" - we hit issue that some page processes were not firing in translated application.
See Page processes not firing in Translated applications
Jan

Value displayed in the cube but not in BEx query

Hi gurus,
I have the field for no. of orders (ANZAU) in the datasource 2LIS_11_VAHDR. It is displaying all the values in the column as '1' in the RSA3 and also in the cube but when the same field is selected in the query there is no display of value '1' .In the query all the values shown in the column is '0' .what is the reason.
How to display the correct value '1' which is in RSA3?
regards,
man

hi,
Check out the following
1.Check the report at the detailed level(line item level)
2.Check if the report is from multiprovider, if so chk the field you needed is selceted from all the cubes you require.
3.Run a full repair and chk upto PSA.
Hope it helps you
Assign points if so
Ramesh

L8 Bug: Quantize value display

Similar Messages

Maybe you are looking for