Label and input box inline?

This doesn't seem like it should be a big deal.

What is the question?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pcthiker" <[email protected]> wrote in
message
news:g81oap$njr$[email protected]..
> This doesn't seem like it should be a big deal.

Similar Messages

Controlling the space between label and Input field in SELECT-OPTION

Hi ,
I am using WDR_SELECT_OPTIONS as a used component in order to dynamically generate the Select option in my WD Component.
Can any one tell me if there is a way to control the spacing between Label and Input field? This is because rest of the UI elements are in one particular order but for this dynamically generated UI.
Please help me.
Thanks,
Kavitha

Hi Kavitha,
The label is required for accessibility reasons. It's not possible to remove it and to use your own label from outside the component to point to it. Labels cannot point to targets across views (and hence acress component) boundaries.
Best regards,
Thomas

[partially solved] firefox and input boxes

I've updated firefox to 3.5 recently, after update, I noticed that input boxes look too long.
here's a screenshot of www.archlinux.org (pay attention to package search area)
and here's a screenshot from google.
I dont have any problems with midori, it renders the page fine:
I tried changing firefox theme and gtk theme but it didnt help.
So, any ideas about this problem?
solved
well, i've solved my problem by changing main font from Lucida Grande to another font.
Last edited by ras0ir (2009-07-14 08:43:05)

I had exactly the same problem but i didn't want to change my system font because i really like the elegance of 'Lucida Grande'.
I tried a bit tweaking Firefox with creating userChrome.css but it didn't work for me.
Then i installed the stylish addon and created a custom userstyle:
* Bugfix for the firefox input fields when using 'Lucida grande' as system font
@namespace url(http://www.w3.org/1999/xhtml);
input {
font-family: sans-serif !important;
With this workaround all input fields are at the right size again. Of course 'sans-serif' shouldn't again point to 'Lucida Grande' For me it's 'DejaVu Sans'.
Could someone help me to realize this workaround with a userChrome.css so i don't need the stylish extension anymore?
Also this tweak applies to all 'input' fields - e.g. to buttons, too. How can i specifiy, that it should only target single-line text inputs?
cheers
Fat

Push Button , Label and combo box

Hi Experts,
Currently facing a problem , please guide.
I have two push buttons say A and B and one combo box.
I am using Combo box with source data as filtered row options.
What I want to accomplish is when push button A is clicked then my combo box should have different souce of data say sheet 1 in excel and when Push button B is clicked then the same combo box should have source data from sheet 2 from the same excel.
I mean dynamic selection of source data and then destination data by using combo boxed.
is it possible ?
Thanks in advance.
Thanks & Regards,
Anjna

Hi,
Use 2 combo boxs CB1 n CB 2.
CB1 : source form sheet1
CB2:Source from sheet 2
when push button A is selected set dynamic visibility such that u get combo box 1
when push button B is selected set dynamic visibility such that u get combo box 2.
Case 2:
Insted of using 2 push buttons you can use a radio butoon and select the lables A or B so that these two combo box components dnt appear at once
Take a radio button component and map lables as A and B
under behaviour tab: >Insert selected item:>mapp it with a blank cell say Sheet3!$G$4
if radio button selection is A then set dynamic visibility such that u get combo box 1
if radio button selection is b then set dynamic visibility such that u get combo box 2
formula cells:
take a blak cell say Sheet3!$H$7 and write formula =IF(Sheet3!$G$4="A","",first label of combo box 2)
take a blak cell say Sheet3!$H$8 and write formula =IF(Sheet3!$G$4="B","",first label of combo box 1)
Combo box 1 :Behaviour tab-->Selected item :Sheet3!$H$7
Combo box 1 :Behaviour tab-->Selected item :Sheet3!$H$8
check if this suits ur req ...
@Sri
Edited by: Sri kamesh on Jun 21, 2011 11:00 AM

How to decrease the gap between label and input field.. pls respnd

hi friends,
I am facing this problem since long time and couldnt get any solution...
pls respnd,
i need to decrease the gap between my input field and label.. its very much gap there..
thanks in very advacne,
niraja

Hi WD ABAP,
i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
Also WDABAP, could you pls reply me to the other thread,
about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
my get_static_att or create_element is not reruting currenct row dropdown value.
what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
plsfnds :(((((
Niraja

Phtmlb: space between Label and Field

Hello,
I am using <phtmlb:matrix> to arrange the fields next to one another on the view. For fields, <phtmlb:formLayoutInputField> is used in which case the label is taken automatically through binding to DDIC fields. At one particular row of matrix, it is required to break-up the cell in 3 more cells, so that I can display 3 fields adjacent to one another in the space of one cell. For this I am nesting one more matrix inside the outer matrix.
Something like this...
<phtmlb:matrix>
<phtmlb:matrixCell row = "1"
col = "1" />
<phtmlb:formLayout>
<phtmlb:formLayoutInputField>
</phtmlb:formLayout>
<phtmlb:matrixCell row = "2"
col = "1" />
<phtmlb:matrix>
<phtmlb:formLayout>
...3 fields next to one another / 3 cells
</phtmlb:formLayout>
</phtmlb:matrix>
</phtmlb:matrix>
I am able to acheive the desired output of 3 fields next to one another, but facing the following problem.
To get the inner matrix(3 fields) into effect, i need to close the <phtmlb:formLayout>.
Now, the first row properly shows all the filds one below the other with proper spacing between the label and input output field.
(Actually all the input_output fileds are placed at a distance of largest text/label in one formlayout).
But when the second row starts, the spacing between label and field is no longer taken as per the first row in above case.
Is it because since a new <phtmlb:fomlayout> is started , the spacing will be as per the elements in this new formlyout. If yes, How can I assure the same spacing between elements of two different formlayouts. I tried "fieldToLabelFactor" but since no. of fields in my page is too large, I can't afford to decide this factor for every <phtmlb:formLayout>.
Or is there any better way to acheive the required output.
Thanks ,
Priti

did u get the solution?

CRM Workflow Input box on Rejection of BP

Hello,
I created 2 Level Custom Workflow for a New BP Approval from CRM Screen.
In approval process, when the manager gets the screen for decision - Approval / Rejection, Once the
manager selects Reject and input box for mandatory rejection text is required.
I created an implicit enhancement for input box using FM 'POPUP_GET_VALUES', this works well in ERP ( SBWP). But no input box is displayed for input in CRM Screen.
Can some1 please help how to proceed ?
Thanks & Regards,
Narendra.

used "Create note" in the Workflow screen to get the rejection text.

Getting an integer from an input box

the title pretty much covers it, i basically need to assign an integer value given from and input box to a variable.
i have search for example of this, but only found examples for returning strings, i tried to adapt it, but i couldnt figure it out.
can anyone please give me an exampel of a simple (very simple) input box that does this?
thank you

[http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#inputVerification|http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#inputVerification]
In the input verifier example there is a lot of code there to digest but really all it is doing is parsing the number in the field before the value of the field is updated. If there is a ParseException thrown then the user input is rejected and the value of the text field doesn't change.
You could implement this more simply by catching the ParseException and popping up the box again until the user types a valid entry.
e.g:
boolean validInput = false
while (!validInput) {
    try {
        //pop up and parse input msg etc
        validInput = true;
   catch (ParseException e) {
      //msg to user -> invalid input
}Obviously not as nice but it gets the job done. We'll call this the 300m Lorus solution.
Edited by: Edward_Kimber on Nov 23, 2008 8:22 AM

Suggestion to add label and checkboxes dynamically

Hi,
I am trying to add labels and check boxes dynamically when I touch a button. I am able to generate the labels and check boxes when I click buttons. Can any one suggest a general layout manager for this? Where do I add the componenst dynamically? Thanks.
Edited by: Lilly07 on Mar 20, 2008 8:10 AM

Hi,
I am reading about gridBagLayout. I tried with Flow layout and it was messy.
I will be having 4 buttons, 2 on top and 2 at the buttom, where as If I click one of the top right button, I have to populate labels and check boxes in the centre(mid) area. For every click, I will be populating one label and set of check boxes.. How do I do this?
button1 button2
....(dynamically populated mid area)
button3 button4I am able to add all the buttons in the layout. But how do I declare the mid area where dynamically populated ones will be added. Any suggestions would be helpful. Thanks.

Text input boxes same colour as background - so "invisible", and button text or buttons often missingt

I have turned off all addons/extensions/plugins - still the same problem:
1: Text input boxes appear to be the same colour as the background - and hence "invisible"
2: Clickable buttons on websites are often invisible, or if they display have no text; e.g. button to right of google search ("go" button?) is seen as a plain box with no text - although button is clickable.
3: Google webpage usually has an image - this is missing, and merely has "UK" to the top left of the input box.
4: On this page for example I can see directly above this text box two vertical black lines - it appears to be a button with a pop-up "insert a link" - it can obviously be clicked when I mouse over it.

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

My new windows 7 machine and firefox color defaults for input boxes are obscurring the input box on the google search page making google unusable

Under Windows 7 Firefox looks quite different including the default blue for input to question boxes which are white on the xp machines. Normally this is not a problem. But on the Google web page the blue is so bold that nothing can be seen except for a very small portion of the characters (in red) extending below the input screen. This becomes miserable if you try to edit a search stmt or backspace to correct a spelling error. you are quickly lost and need to clear the cache and reload the page.
This problem does not appear using Chrome or IE on the same machine. Nor is it a problem using Firefox 9.0.1 on two other home PC's running XP (there no input box obscures the answer). This seems to be a lot of work.

That can be caused by the "Keystroke protection" in Comcast Constant Guard.<br />
"Configure Anti-Keylogging Settings" -> disable
*[[/questions/874709]]
*[[/questions/870165]]

I wish to generate reports from the database an out put it but i need to enter a date from and to ina html input box

i wish to generate reports from the database an out put it
but i need to enter a date from and to ina html input box
in the input box a data of range will be input from a start
to latest
latest being the default as today's date.
any help tips snipplets, concepts , turot=rails.
thanks

easycfm.com has tutorials for people who are brand new.
If you don't know much about sql, I have heard good things
about the book, Teach Yourself SQL in 10 Minutes by Ben
Forta.

Input box in cf that intakes $ amount and accomodates commas

The application that I took over crashes when inserting a
comma in a input box.

If it were my app, I'd use an input mask and then the commas
would simply not be there.
Alternatively, you can strip away all the non numbers on your
action page.

I using an event structure for an input box and also for hardware input

Hi there!
I have many input boxes and display boxes on my user interface and i have a case for it in the event structure. If the user changes the values of the input boxes, the particular event case writes this new value to the hardware. However, in the timeout section of the event structure, we read the inputs from the hardware and we set the value for its related display object. Within the timeout section i set the value for the related user interface display component, by making use of the property node value.
Furthermore, for most of the display components, i have a event case for a value change associated with it. In that event case, i check for range errors and so forth.
My assumption was that when i read the value in from the hardware and set the property node value, the user interface component's value will change and it would then trigger the event of the value changed for that component.
My assumption worked to the point of updating the component's value, however, it did not trigger the event for the value changed for this component.
Please advise me on how to achieve what i wish to.
Thanks.
Regards,

Local variables are actually much more efficient than property nodes as far as execution speed goes. Take that same VI and delete the property node and instead write to a local variable inside the loop. You'll see the speed nearly identical to writing directly to the indicator. But note that variables also cause a copy of the data to be created. So if you're just using the "Value" property, you're much better off using a local variable. But don't use both at the same time. If you are reading/writing other properties when you update/read the value, you might as well use the value property.
Sometimes you can't get around using either variables or property nodes. Initializing controls to saved values from an ini file is one example. But in this case, they are only written to once as the application starts so the performance hit is negligible.
One thing you can do is store values in a shift register as they are read and pass this through your application so the last value read can be accessed from anywhere. You can even create a cluster that runs through the shift register to hold several values in a single register. This can be expanded a bit farther to create what's called a Functional Global. This basically a subVI with a While loop that only runs once on each call. It has a shift register to store data and a Case structure to Read or Write data into the register. There's a pretty good example that ships with LabVIEW showing how these work. Open the Example finder and search for "Functional Global Communication". This example shows how to use them to pass data between two independent loops, but they work just as well in a single loop application.
One of the big advantages of these Functional Globals over the standard LabVIEW Globals and local variables is that you can add cases to manipulate the data in addition to just storing it. Also, since it's a subVI, access to the data is protected to one caller at a time whereas variables can have multiple reads and/or writes at the same time. This can cause race conditions.
Hope that helps a bit.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Label and input box inline?

Similar Messages

Maybe you are looking for