Label printing vertically
Hi all,
I need to print the labels vertically in the below manner.
1 6
2 7
3 8
4 9
5 10
I have done printing horizontally, is the above pattern possible??
Edited by: Navaneeth Rao on Jan 8, 2010 4:33 PM
Hi sandra... thanks fr the reply.... these numbers are the label numbers in the same page.. and the orientation is portrait... here once again i write the required pattern.
label1 label6
label2 label7
label3 label8
label4 label9
label5 label10
in each label we need to print the bar code along with the material number... I just need the logic for printing in the above pattern using SMARTFORMS.
Similar Messages
-
Problem printing horizontal text in smartform with zebra Z6M label printer
hello,
The situation is this:
There is a Z smartform wich prints a label to a zebra Z6M label printer with the text and barcodes vertically.
The form have a command in the main windows with the parameter: S_LZPL_SETUP '^FWR'
This label works fine, but the client want to change the form, they have told me to create a new smartform and print the info horizontally, using the same printer.
The tests i have done are the following:
create a smartform from ground and write a template text and a barcode with a new font of system barcodes. the bardoce is shown ok(it is shown horizontally), the problem is that the template text is shown vertically, as in the original smartform.
then i tried on another zebra ZM600 label printer, similar model, but not the same, and the smartform printed was ok (text and barcodes shown horizontally). So i think is a configuration setting problem, but i dont know where to search.
i have checked the label printer parameters in SPAD, but didnt find anything souspicios.
have you any idea?
thanks in advance.See these if they be of any help.....
BARCODE:
goto smartform styles-> create a style-->
create a character format.
under standard settings give the bar code name
use this style in ur smartform. select the data field which u want to barcode print and assign the character format
Similarly
SAPSCRIPT
open the form and click the character format button and
repeat the step as above....
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/frameset.htm
Go to Character formate in your form.
create a new char formate with enable BAR code AND
you can give its type too.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
a barcode printer
a barcode reader
a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Creating Bar code:
) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Check this thread for detail information.
How to print Barcode in te SAP SCRIPTS? -
Hi all,
i have created a label using barone software and used it in sapcript.now
how do i use the text elements and control the number of labels to be printed from printprogram.Hi
To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
1. Create a page window and assign it to a page.
2. Choose Edit --> Main windows.
A dialog box appears.
3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
Also Check these links.
how to create labels in sap script?
labels in script
Labels in Scripts
<b>Reward points for useful Answers</b>
Regards
Anji -
Label Printing Using Address Book - How can I Print multiple labels of the same name?
Label Printing Using Address Book - How can I Print multiple labels of the same name?
I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions. -
How to print Vertical barcode in SAP script
I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay. -
How to Print Vertically in Smart Forms
I need to print data in vertical format into columns in smart forms. Can any one give me the solution.
Hi Sreedhar,
In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
Best Regards,
Ram. -
Standard Smartform for label printing for packages - pls advice
Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful). -
Primera LX 400 Label Printer No Longer Working with Mountain Lion
Hi-
I upgraded my OS to Mountain Lion and most everything works OK except my Primera LX400 label printer. The error message I get when trying to install the driver is "Software for this printer isn't available from Apple. Contact the printer's manufacturer for the latest software."
I contacted Primera but I haven't received an answer yet. Anyone else solve this problem with Mountain Lion and Primera Printers?
For those that depend on the Primera printers, you might want to wait before upgrading.For those with the same problem, Primera says they will have new drivers up 7/31/12:
http://www.primera.com/primera_printer_drivers.html
I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully. -
Label Printing issues on Crystal Reports Server
I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?
I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G -
Help with Zebra Label Printer and Multi Order Shipping Tool- Partial Label Printing
I have a zebra gx420d which is compatible the zebra 2844 (its the new model) and I am having a hard time printing labels with the multi order shipping tool. I have the correct driver, the printer test page works fine, and everything is configured for a 4x6 label.
I have set the selling preferences in paypal to match the zebra 2844 printer and within the mult order tool, I have edited the settings to also match zebra 2844.
My problem is that regardless of what or how I do it, my printer will only print a 1/4 of the label. It is not shrinking the label, it is starting to print at the correct size but stops 1/4 of the way through. Almost like it thinks my label size is too small but as i mentioned, I confirmed 4x6 on the label settings at both printer properties and printer preferences. I spent and hour on tech support with zebra and they confirmed the printer is working as it is supposed to. I also know this because my Amazon labels print correctly as well. Its only paypal and ebay labels that are not working. Very frustrating. Can anyone help?Hi,
did you upload the desgin in a standard text with option ITF? This you can copy then to the layoutset. At least this is the way of working with BARONE.
Cheers,
Stefan -
Cannot Print to CUPS Printer, UPS Label Printer
After upgrading to Mavericks, I can no longer print to my UPS Label Printer which utilizes the CUPS drivers. I have tried deleting the printer and reinstalling it. No luck. All other printers are working fine. Any ideas?
This is all about the driver!
Canon doesn't provide drivers that will work for a Windows-shared printer. You have to use a CUPS driver for that.
Your model isn't directly supported by Gutenprint (CUPS drivers included by Apple in OS X), but the newer Gutenprint has iP4500 and several models "close" to yours:
http://www.linuxfoundation.org/en/OpenPrinting/macosx
Experiment with a couple Gutenprint models. -
Pallet Label print after TO of Goods receipt of process Order
Hello,
After the GR of Process Order I need to prin tthe Pallet label through Transfer Order.
Example .. CH-6200 ( SKU Product ) is produce 60 kg.. after process Order..
The output of the process order is nothing but the 6 can each of 10 kg.
Now My pallet limitation is 2 can per pallet which I have maintained in the Material master ( Warehouse Management View 2: 2 can per pallet)
Not I want to prin the the pallet label i.e. during TO ....number of label is going to print are 3.. ( 2 can per pallet) .
Can anyone suggest me is there nany standard form for Pallet Label print in WM.
Thanks
Vaibhva BAnsodHi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory -
I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
PaulaI purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula -
How to make use of label printing in sap smartforms
Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
NikhilHi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm] -
Printing from an iPad to Dymo Label printer 750
Am i able to print labels from an iPad to a Dymo label printer 750 via a airport express?
List of supported AirPrinters.
http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
Buy another box
"The xPrintServer-Network Edition is a 'plug-and-print' hardware print server for printing from Apple iOS devices running iOS version 4.2 or higher. The device is roughly the size of an iPhone and uses the iOS native print menu. It requires no additional applications, software downloads, or printer driver installations and automatically discovers available networked printers supporting JetDirect / AppSocket, LPD and IPP protocols."
http://www.smallnetbuilder.com/cloud/cloud-devices/497-lantronix-shipping-airpri nt-server
To print from the iPad your going to have to install some more software:
-- many printer makers have iPad applications for printer. Look in the app store
-- generic software like Printopia
iPad Print Applications -- usually free:
Samsung
http://itunes.apple.com/us/app/samsung-mobile-print/id429611283?mt=8
HP App, ePrint Home & Biz
http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
Lexmark and possible Dell
http://itunes.apple.com/us/app/lexmark-mobile-printing/id469415392?mt=8
more helper apps see
http://www.howtogeek.com/102671/how-to-enable-airprint-for-ios-printing-from-any -mac-or-windows-pc/
Generic Software:
You can connect the printer to a computer and install software on your iPad/computer to print from your ipad to the comptuer then to the printer.
example:
http://www.ecamm.com/mac/printopia/
Should you have some office printer that are connected to a computer there are print enablling applicaionts you can run on the iPad to print to such printers.
For Windows, try: PrintBreau, or PrintCentral.
PrintCentral Pro
http://itunes.apple.com/us/app/printcentral-pro/id426362921?mt=8
Source: https://discussions.apple.com/thread/2729284?start=0&tstart=0
Thanks to AirPrint Hacktivator you can turn any printer connected to your Mac or Windows PC into an AirPrint compatible printer. from:
http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
this google query will give you more options
ipad airprint via mac
Maybe you are looking for
-
Can u use more than one apple account on your device and itunes
Can u use more than one apple account on your device and itunes
-
My ipod no longer read playlist names?
since i synced my ipod mini shuffle on Sunday, my ipod no longer reads playlist names. it reads, playlist 1, playlist 2 and so on. how do i get to hear the playlist names?
-
I have processed my raw and jpeg files on my iPad using Snapseed . What format are they saved in on the iPad and how do I transfer them back to my pc where I use photoshop elements. Can I use just an ordinary flaws drive with the USB adaptor? Thanks
-
Ssis execute process task error: process exit code was 1 while the expected was 0
Hi Sir, in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file. del \\servername\foldername\name.txt rcmd \\servername D:\name1.bat del \\
-
First and last frame disappearing off every clip
Hi, Every clip I import in Final cut pro 6.0 loses its first and last frame. The clips I import are in photoJpeg / 24p (verified with the -get info- of Quicktime Pro), but once in FCP they are marked as 23.98 ?!?! In the browser the info of the clip