Label1.text + Label2.text = Mess

Hello!
Im sorry im troubling you with this (i guess) simple problem.
My problem i simple. I want to add two numbers stored in two
different label components.
Ex:
Label1.text = 1;
Label2.text = 1;
Label3.text = Label1.text + Label2.text;
The result is that Label3.text becomes 11, but i want it to
become 2! How do i make it add the to numbers instead of just
adding two strings to each other.

I think it has been more often when I was reading css, xml,
or other external files, but it could also have been some kind of
white space or special key at the end. In any event I just find it
easier to always use parseInt/Float and not have to worry about it
working.
I've never tested it for any kind of speed hit for anything
that required a lot of operations, so there might be a savings
there, but these types of things are usually fairly low performance
in any event.
So for typing four more characters I feel I get a benefit.
Plus you can use the second argument and convert to other bases if
you need to!

Similar Messages

  • HT4946 I deleted my daughters text mess by mistake yesterday is there a way to get them back ?

    I deleted my daughters text mess by mistake yesterday is there a way to get them back??

    You would have to restore your phone from a backup, if that message was included in the backup.
    http://support.apple.com/kb/HT1766

  • Safari Text messed up (leopard)

    I just got a macbook today and the text on Safari is messed up. I can't quite think of a word to describe what is happening, but on a lot of websites the text is kind of squished and some letters are on top of each other (making it difficult to read, obviously). For example, the word "defend" on BBC News has the the each letter d on top of of the e's, if that makes sense. I've tried the text smooting and messing with some settings. I tried looking this up, but can't anything. Does anyone know what I'm talking about. Thanks for any help.

    Something similar happened to me after the upgrade. I went into fontbook and found a font that matched what I was seeing on webpages etc. I found the offending font and disabled it, that fixed the problem.

  • Old word document is text mess when open them in word 2012 ?

    Hi there 
    I have a lot of old word document (they created by word 2003 & 2007 and 2010 ) and i need to edit them in word 2012 but when I open them in word 2012 there text are mess and mixed .
    i installed my language pack ( persian ) on word 2012 but not effective 
    please help me how can I fix them and how to edit old word document in word 2012 ?
    I really need you're help to fix it and Edit mu files 
    so help
    Whit the best ragard :
    Raha

    Before we go any further, I would like to say that there is no Word 2012 version released before for Microsoft official site.
    If the Word document could still be opened by other machine except for Word 20XX in the
    specific machine, that means the data file itself is fine. But Word 20XX application mighe be corrupted. Repair it and then check the result.
    Tony Chen
    TechNet Community Support

  • How to only remove the background pic in text mess...

    Hello there
    I'm a pround owner of a Nokia E52 now and as any enthusiastic new buyer, I tried changing the theme & stuff. I came upon some very cool themes (in tehkseven.net), but all their problem is that the background picture interferes with my text messaging. I mean the colors are so varied that I can't keep the background picture during text messaging, whatever color I choose, it might be unreadable when I reach a certain area of the picture.
    I am looking for a way to ONLY disable the background picture (wallpaper) in the new text message section, not anywhere else. Is that even possible?

    you can  select a plain theme have a look at sites such as zedge.com themes will interfeer depending on the colour content and placement of certain colours that are getting in the way of the visible field of text
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia X6 - Cannot see contact number in text messa...

    Hi all,
    When I am sending a text message, I cannot see the contact telephone number in the To: field. Is there a setting somewhere that I have missed ?
    In my previous nokia phones, you can always see the contact name and the number you are using.
    Thanks.

    1 : Assume that you have entered the different nos. (mobile, Landline, etc)for ONE person under a single Phone book entry..
    2 : If you have done the above you will get the pop-up box for selecting the phone no.
    3 : When you select the no. from the list you know which one was selected (... and it is not a landline no..)
    Then why do you need to see the no. in the 'To' field once again ?
    And you can first write the Text message and then add receipients in the 'To' field...
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • I am not receiving pictures through my text mess???

    help? is anyone else running into this problem? i cant receive any pictures when sent from another user.

        she7g,
    Let's fix this! Is this only happening with a specific contact? Are you able to send text? Are you receiving an error message? Please share which phone you have so I may further assist. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • I really need to get this sorted, weird text mess

    Sorry to bang on about this.
    I have a number of iWeb websites such as www.sbls.co.uk
    If you launch a browser and look at the pages they are fine. If however you change the text size, by just one point in the browser, the titles on some of the iweb pages goes huge, like 100points and renders that page useless. Decreasing the text size does not help you have to quit the browser and try again.
    If you goto the page and then adjust font size in the browser it works just fine. Its if you change font size before going to the website. Its repeatable.
    it does it in both Safari and Firefox for me and is likely a bug in iWeb. Does anyone else experience this with their web pages? I am at a loss what to do.
    Here is an example of it as it should look:
    http://homepage.mac.com/garethirwin/.Pictures/good.jpg
    And this is how it looks if any adjusments are made to font sizes in a broswer
    http://homepage.mac.com/garethirwin/.Pictures/bad.jpg
    Message was edited by: Gary i

    Pablos1966 wrote:
    Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
    No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
    Why don't you have the original Apple ID? Where did you get the phone?

  • Ignored/missed calls having the option to sent a text mess.

    Hello,
    I am not sure if the Droid X has this feature or how to turn on if it does.
    I had a Lg dare and when you Ignored a call it gave the option to reply with a text message.
    Can this droid x do this?

    The Incredible does.

  • Why can't I send text mess on my iPhone?

    Why can't I send a text message on my iphone3

    maybe you have been typing the text in the subject column.and if u type it  there and send it it will not go through unless the receiver is an iphone user.so make sure ur type the text in the space below the subject

  • ANOTHER S60 phone (N85) that won't send text messa...

    This is ridiculous - I'm experiencing the same problem again, as have hundreds if not thousands of other Nokia S60 users across a large number of different phones.  Having the "accepted solution" of all of these be a hard reset of the phone is just plain nuts.  This is a SERIOUS issue that has plagued Nokia phones for years as far as I can tell, and there still is no real solution.  I don't want to do a hard reset - I want my phone to just work like it is supposed to.
    I too have looked at all the other settings - my message center number is correct, creating a new one with the same number did no good, etc. This is not a provider issue - it is a Nokia issue.
    The first time it happened the phone crashed just after I had sent a text message - it then continued to resend that same message over 40 times to my fiancee's phone before I figured out that it was stuck in the outbox resending every three minutes.  I found I could delete the message, and keep it from sending over and over - but now my phone would not send any new messages, although it could still recieve them.  I pulled the battery and the sim card, and eventually my ability to send text messages was restored - no longer would they sit in the Outbox with "resending" next to them.  Then a couple weeks later it happened again - but this time with no crash of the phone first.  Once again I was able to get my outgoing texts back by jumping through hoops.  Now, a few days later, it has again popped up, and so far, I can't restore my ability to send messages.
    So I could back up my phone and do a hard reset - but what is my guarantee that this is going to solve the problem forever?  Oh that's right, it doesn't.  Maybe I will get my ability to send messages back for a week, a month, etc.  Or maybe a day.  I'm just fed up with this issue.  I could put up with a bunch of other problems that the N85 has, but this just takes the cake - because it isn't just an issue with the N85.  It is endemic to all Nokia S60 phones as far as I can tell, from reading so many different accounts of the same issue. I can't wait for an Android phone to come to AT&T so I can dump this thing.  I loved my old 6230 S40 phone - it just worked.  But S60 just seems to have so many issues!

    Hello,
    I also have a similar problem with sending text messages especially to some countries in Western Europe.
    I can receive the messages though from the people that i cannot send too.
    I would also like to point out that this does not only affect People with IPhones. I tried different SIM Cards in 4 different Droids. Same Problem and yes the SMS Service Center Number is correct. Verifed by AT&T's finest.
    After spending numerous hours with AT&T on the phone (which was a waste of time since the first wave of Customer Service that AT&T throws at you has problems tying their shoe laces in the morning) I decided to search the Internet for a solution only to find out that there is a mass of AT&T Customers with similar issues.
    It doesn't matter if the receiving party is with Verizon, T-Mobile, Sprint, T-Mobile Austria, Vodafone Germany, E-Plus-Germany, A1-Austria, Telering  and these are only a few on my list.
    AT&T Customer Service keeps insisting that they do not have a Problem but that the Problem lies solely by every other provider in the world. Arrogance at it's highest level.
    Now my Relatives and Friends in the US and Oversees are contacting their Providers in order to get an AT&TIssue figured out. Pathetic!
    People get charged for Text Messages (20 cents per SMS or more) that never arrive at their destination and as far as i am concerned AT&T is conducting false advertisment.
    This is by no means Global Coverage unless some Brainsurgeons at AT&T are under the impression that Europe and numerous other Countries are not located on the same Globe as they are. On second thought they might be right since they are way out there.
    To bad that i live in an area that has limited Carrier Choices so switching creates some other Issues otherwise i would have cancelled my Contract a long time ago.
    Signed: One very satisfied Customer.
    [Legal discussions are not permitted per the Guidelines]

  • Displaying Senders name when receiving a text mess...

    Hiya,
    Not sure if there is an app or a way of doing this - but can you download something for the N96 that when you get a text message come through, instead of it just saying "1 New Message" it'll say "1 New Message from x" where x is the senders name?
    Just a little tweak really that'll be nice I suppose! Tried searching for a similar question on here, and there may well be one but I didn't get through all the pages...
    Thanks for help!

    Psycho, once again you amaze me. How do you find out about all these little applications that I've never even heard off? Must get you to send me a list of applications you have and what they are for.

  • CS 5.5 Create Outlines text messes with stroke

    I am running CS 5.5 and I need to be able to turn all my text into outlines.  Now, before I get slammed for doing this, I send most of my material over seas and converting the text to outlines is pretty much a requirement.
    My issue is that when I do "Create Outlines" in InDesign, it automatically reduces the stroke width of all my text. Also, if I have it set to stroke to the outside of the text, it defaults to center.  If I try to change the converted text back to outside stroke it goes all crazy, not giving me a uniform stroke.
    Is there a fix for this or a different way for me to convert my text and have the stroke attributes left alone?

    You are stuck.
    I, too, am sometimes forced by my clients to convert all text to outlines. We're a translation provider, so my clients often want to be able to open up their InDesign files to adjust graphics without any fear of dropped fonts or human error damaging their translations. I don't know why you need to apply a stroke to text (are you faking bold?) but you can't include reliance on applying strokes to text in any workflow that relies on having all text converted to curves/outlines at the end of the project.
    I've seen some workarounds of varying degrees of quality that worked okay in unique circumstances, but nothing that is a one-shot solution.
    The link you posted - there is at least one thread on these forums about that link & how about that technique no longer works in CS5 or CS5.5, I can't recall exactly. I do remember that a particularly helpful & knowledgable Adobe employee pointed out that the fact that this method worked to convert all text to outlines was basically a workaround or hack - that what you were realy doing was flattening transparency, which converted type to outlines as a side-effect. So it would be useless to you in any event if you must retain layers in your PDF.
    If you are, as I suspect, adding stroke to fake a boldface that you don't have (or that doesn't exist), try another technique - perhaps you can use a font editor to actually generate a font with the effect you're trying to get with the stroke. If you're using stroke as a visual effect, then you may be able to dupe & stack - set your stroked phrase without stroke, create outlines, duplicate, and then add stroke, then place it behind the first outlined word in the stacking order, then manually (using the direct select tool) play with the curves until it looks okay.
    As I said before, I've seen a variety of workarounds, and if you can post a sample of what you are trying to do then perhaps I or one of the other forums readers can figure out a trick to suggest to you.

  • Finder window text messed up?

    My fiinder window is messed up graphically
    My MBP hangs or freezes
    I recently migrated my files and software from my older 2005 MBP running 10.5.8
    Could there be any conflicts?

    If you could spare more than five syllables to describe the problem, and perhaps post a screenshot to illustrate it, perhaps someone could help you.

  • Windows Itunes Text Messed Up!

    This is exactly the same problem with this post:
    https://discussions.apple.com/message/12892737#12892737
    Here's my picture:
    http://i1181.photobucket.com/albums/x430/raymolino/***.jpg
    Please help. It happened out of nowhere

    Maybe this technote may help:
    http://support.apple.com/kb/TA23140?viewlocale=en_US
    Yvan KOENIG (VALLAURIS, France) mercredi 9 septembre 2009 10:46:10

Maybe you are looking for

  • Problems with dynamic PDF display in reader 8.1.0

    I have created a dynamic PDF Form having 30 text fields in a row. All these fields are bounded to XSD. The design is like, a row of fields display a single user informations. When I import a XML with 100 user informations, then my PDF crashes. If I i

  • Applet, Application communication

    Hi Someone tell me how to do applet, application communication. I have one standalone application, running in server and receiving connection from applets and every min. the server has to send some data back to each apllet connected. How to do it...

  • Req for UDF

    Hi All, In Mapping I have to check for a field, ie if the field has value i need to pass it to target or else need to throw error. mapping is  X (1) --->  Y (0..1) , X is coming from CSV file , if i give blank in the file its processign , but it shou

  • Add printers to OD

    I tried to follow the documentation of the Print Service Admin to put a printer into OD. I can add a printer record in Workgroup Manager but then there is a step to add an attribute and choosing e.g. "PrinterLPRHost" from a list. Unfortunately that l

  • Android Adobe Reader error with Adobe 8

    Hello,   My Android phone won't open an Adobe document b/c it says the current app doesn't support it. I saw on the Adobe website that it doesn't work with Adobe 8, is there an update I can do for my phone app so I can see the documents? its for work