Labview 8.0 auto edit tool

Hi, how can I permanently switch the edit tool to
manual? Every time I start the Dev-System, it is reset to auto-tool,
although I set it to manual. Who can help?
Greets, Dave

Have you tried setting it  under tools options:
Go to the Environment section and uncheck "Lock automatic tool selection".
(Personally, I really like the automatic tool selection. It only takes very little time to get used to it and it works great once you get the hang of it. )
Message Edited by altenbach on 01-08-2006 02:03 PM
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • PSE9 crashes when using editing tools

    After over 10 hours on the phone with
    Adobe support and spending $200
    + for Ram and processor upgrades
    they still can not find the reason PSE9 crash every time i use editing tools. Most often the Auto red eye and spot healing tool, but it will crash in organizer also.

    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Try now and let me know your comments.
    Also would be good if you can share your system info from Help->System Info in PSE.
    Thanks,
    Garry

  • Rough Estimate for Cost of Developing Image Editing Tool?

    Hello all,
    Anyone have an idea of what it would cost to have a flash developer create an image editing tool from scratch?  Normal tasks such as resize and rotation as well as redeye and color correction including auto sepia color woudl be needed.
    A ballpark figure will do.
    Any guesses?

    I don't think you would be able to have "a" developer do it. It would require a goodly number of people. And as Bentley Wolfe says it won't be cheap. Certainly into 6 figures. No idea if it would be low or high 6 figures. And if it wasn't I would be very afraid of what you would get.

  • ACROBAT XI Pro -EDIT TOOL SET  - POP-UP WINDOW IS TOO LARGE

    Good Day -
    I've been experiencing very nagging problem since installing recent Acrobat Xi Pro uodate (on windows 7 system):
    Specifically - I cannot edit/change the TOOL SET to include needed TOOLS (i.e., that were all previously in my Tool set) as the EDIT TOOL SET WINDOW (i.e., pop-up
    window) is TOO LARGE and does not allow scrolling/ or moving down to SAVE  any tool sets and or tool set changes. Very frustrating as all attempts (and recommendations from reviews/support) for decreasing the size of EDIT TOOL SET WINDOW (popup) in order to save (i.e. include ANY) tools have been unsuccessful.  So for past week I've been unable to include/use any TOOLS for working in (i.e., editing/commenting etc) pdf's.  Has anyone else experienced this problem?  Would greatly appreciate any / all steps & recommendations for fixing.
    Thank-you!

    First, make sure you are on the latest update 11.0.09. Help->check for updates should get you there.
    If check for updates says that you have the latest, see if the setting: Edit->Settings->General->Basic Tools->Scale for screen resolution and try various options (you'll have to restart Acrobat with each selection)

  • How does one tell if they have full access to page creation/editing tools?

    I have an application that was built by someone else. The pages link via parameters to PL/SQL Packages/Procedures/Functions. Now I need to do minor enhancements/corrections and am learning Oracle and OAS as I go. I have read parts of Oracle OAS Portal Handbook from Oracle Press among many other things.
    Providers have queries, Portlets use Providers. Creators of pages make the connection from Portlets to information if they have permissions.
    The base application in question uses almost exclusively Dynamic Pages. There are no forms. These pages contain all possible manner of item content. I get the idea that editing is possible using only the portal tools but I am unsure. A PDK is not an option unless it is part of the OAS tool we currently use. I need to stay pure Portal and PL/SQL.
    I suspect the 'portal' user does not have all rights on my system because I do see an over abundance of editing Icons as shown in the OAS Portal Handbook. Is there a website, book, or simple explanation of how/where to access the editing tools for individual items such as creating/editing/deleting a drop-down box from a dynamic page? It seems that Portlet items just 'appear' in the examples, and nothing I've read really talks about how to specify what you want to see on a page or how to edit a page that already exists.
    Any enlightenment appreciated,
    Rick

    Just out of curiosity... Is there something you do
    like about Mac/Apple?
    To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
    If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

  • Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

    I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
    Thanks!

    Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
    iTunes Support -
    http://www.apple.com/support/itunes/

  • My location bar, tool bar (file, edit, tools, bookmarks, help) disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.

    My location bar, tool bar (file, edit, tools, bookmarks, help) all disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.
    The problem started when I turned on the computer this morning. I tried to install Mozilla 4 from your website and that installed but I still have nothing on the top.

    It may be due to Firebug. Seeing as how you're a web developer, it's very possible you have this installed. The latest version, 1.7X a10, appears to cause everything you described. I downgraded to "a8" and that seems to have fixed everything.
    I also recreated a profile from scratch before trying this out, so I can't guarantee it's definitely Firebug.
    Similar issue: https://support.mozilla.com/en-US/questions/783078
    edit: If you go to the Firebug forums, you'll see this is now a known problem. http://code.google.com/p/fbug/issues/detail?id=4012 for the issue tracker.

  • Acrobat 9 Pro Portfolio Editing Tools Disappeared?

    Hello, I created a portfolio in Acrobat 9 Pro. I saved the file. When I reopen the file, all of my editing tools which are usually in a menu bar on the top of the document, are no longer available to me, ie. the "form", "multi-media" tabs. There is only one tool menu with a "modifiy" tab, which I set to "edit", but the only tools that become available to me are the "edit portfolio tools" that show up on the right hand side of the screen. How do I get back to a point where I can edit this document and add multi-media files?
    I attached a pic of what the program looks like now, without the tools I need.
    Please help
    Robyn

    What you are seeing is correct. The tools you are looking for (form, multi-media, etc) are all PDF document editing tools. However, a portfolio file isn't actually a document. It's a collection of files pulled together in a sort of a PDF wrapper.
    The official definition from the help documentation:
    A PDF Portfolio contains multiple files assembled into an integrated PDF unit. The files in a PDF Portfolio can be in different formats and created in different applications. For example, suppose you have a project that includes text documents, email messages, spreadsheets, CAD drawings, and PowerPoint presentations. You could combine all of these documents into a PDF Portfolio. The original files retain their individual identities but are assembled into one PDF Portfolio file. Users can open, read, edit, and format each component file independently of the other component files in the PDF Portfolio.
    You can add multi-media files to the portfolio a number of ways, most commonly this is done via drag/drop, clicking on the buttons at the bottom of the portfolio window when it's in edit mode (what you have pictured), or selecting those same options (add files, add existing folder) from the modify menu in the portfolio toolbar.

  • How to get a true "full screen" view without the edit tools?  The help manual promises such a view.

    How do I get a true "full screen" view in the new version of Iphoto without the edit tools showing?  Weirdly enough, the help manual promises such a "full" view, which was always available in my earlier version of Iphoto.
    Thanks, in advance.

    Click on the Edit button to get into Edit mode. Click on it again to come out of edit mode.
    Regards
    TD

  • Lightroom 5.2 freezes when using the spot edit tool with Wacom Intuos 5

    Hi,
       I've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great.  I recently purchased Lightroom 5.2 only to discover that when I use the spot edit tool that it freezes when i use this tool as a brush.  It starts off smooth, but after brushing across my area i want to clone/heal, Lightroom seems to freeze up, and the spot edit tool is unusable.  I can lift my pen off the tablet and a few seconds later Lightroom comes back, but the tablet is basically unusable to me.  The mouse works perfectly fine.
      I've read other posts at the end of last year '12, that walks through some regedits and disabling some other tablet functions, but none of those work for me.  Any suggestions would be appreciated.
    Thanks Ed
    Lightroom version: 5.2 [922700]
    Operating system: Windows 7 Ultimate Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 2.7 GHz
    Built-in memory: 16375.0 MB
    Real memory available to Lightroom: 16375.0 MB
    Real memory used by Lightroom: 429.4 MB (2.6%)
    Virtual memory used by Lightroom: 403.7 MB
    Memory cache size: 300.8 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 144 DPI
    Desktop composition enabled: No
    Displays: 1) 1920x1200
    Adapter #1: Vendor : 1002
              Device : 9498
              Subsystem : 16031462
              Revision : 0
              Video Memory : 1005
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (Realtek High Definition Audio)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: LR5x20
    CardID: 38040
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: ATI Radeon HD 4600 Series
    ShaderModel: 10.1
    Vendor: AMD
    VendorID: 4098
    Version: 1002:9498:16031462:0000

    I solved my own issue.  I saw an article @ http://www.lightroomforums.net/showthread.php?19694-Spot-removal-tool-doesn-t-work-with-Wa com-Intuos-5-in-LR-5 that solved my issue.
    Step 1:
    Walcom Tablet Properties
    Step 2:
    Click on Customize and change the default line graph from this:
    Step 3:
    To this
    Step 4:
    Click OK.
    After that, my spot edit tool stopped freezing in LR 5.2 while i was using my intuos 5 pen.
    Prior to doing this, I also did the procedure listed here:  http://forum.wacom.eu/viewtopic.php?f=10&t=8036
    So it's possible that both need to be done in order for the freezing to stop.  I hope this can help others.

  • CS4 Bridge Auto stack tool makes my computer Crash

    I'm using a modern computer running Windows XP, 3 GB of memory , a modern video card with 1 GB of memory and the latest drivers, Photoshop CS 4 (with the latest updates), and the bridge auto-stack panorama/HDR doesn't work. When I click on the tool I get an error message that says "images missing preview data (then the image name) within okay box. This repeats on and on, until a file is created named "auto collection cash.XML). It would appear that the process is complete however this is not the case as bridge locked up and I can't access the stack. Closing and reopening bridge allows me to delete the XML file. I can then unstacked the images. Incidentally, if I manually select the files, I can successfully use either the panorama, or HDR tool, so it would appear that it's not a problem with the files themselves. If I use the auto stack tool on JPEG files it works. If I use it on any folder with raw files (in this case canon CR2), the 'images missing preview data" dialog box opens up.
    Recently, I worked with several Adobe support technicians, who came to the conclusion that I had a problem with my Windows user file, and not with Photoshop and bridge. I accepted this principle and created a new user account in Windows, I used the Adobe downloadable uninstall program (to clean out Photoshop and any registry entries). I then reinstalled Photoshop and re-created my preferences etc. and found that the auto stack tool worked fine. It's been about two weeks, and as you may imagine there is an ongoing development and improving of the Windows user file. Yesterday I found the auto stack lockup problem has returned.
    Can anyone suggest why I'm having this problem? I'm aware that I can repeat the above, but I'm concerned that it will not solve the problem long term. This auto stack tool could be very helpful, but I'm not sure it's worth all the time and effort to fix it only short-term.
    Michael

    Hello:  I notice that no one has replied to your post. That is a shame.  I am having the exact same problem that you described and it is happening in two different macs running the latest version of Leopard, OS 10. 5.8. I believe the problem is with Adobe  and not your operating system, or any corrupted files in your user files.   Have you had any luck solving your problem?  If so, please share it with me, as I think our problems are related.  Thank you, GuruDog

  • Advanced editing tool not working in Acrobat Pro 9.0

    I created a fillable form in Live Cycle ES 8.2 and the recipient wants to add a hyperlink to a website in one of the text field areas of the form but it won't work.
    I tried to do it for him in Adobe Acrobat Pro 9.0 but when I go to the Advanced Editing tool it is greyed out. Can anyone tell me how to get the advanced editing tool to work or why it may be disabled?

    Thank you but if I put it back into LiveCycle everything that has been inputted by the recipient is lost. Do you know if there is a setting in LiveCycle that allows hyperlinks to be entered in to the text area by the recipient of the form?

  • What happened to the "Text Edits Tool" in Acrobat X?

    I know the answer is "it went away" but, seriously, please bring it back. In Acrobat 9, when you activated the "Text Edits Tool," it would automatically switch between insert, delete, and replace text in a context-sensitive way. You just had an active tool cursor - if you highlighted text and started typing, it would "replace" the text. If you clicked in one spot and started typing, it would "insert" text. If you highlighted text and clicked the Delete key, it would "delete" text. All this with one tool, that stayed active the entire time you were using it.
    Now, in Acrobat X, you have 3 different tools. You have to click to select the tool - mark the change. Click to select the next tool and mark that change. And on and on. And while you can right-click on any single tool and select "Keep tool selected" - there's no way to make that the default behavior. And that doesn't help when switching back and forth between activities.
    I know that the Selection Tool can now almost serve as the old "Text Edits Tool" - this works quickly with delete, but requires the tilde shortcut for insert or replace. Basically one extra step for each edit than there was with the Text Edits Tool.
    One might think that that little extra click isn't a big deal - but when you are marking up a PDF all day, every day, it adds up.

    I assume you're talking about commenting and markup rather than editing the text of the document itself.
    The keyboard shortcuts are  designed to do exactly what you want. With the multi-select tool active (I beam + black arrow on the toolbar):
    Select some text and press the Insert key - a new Replace text annotation is created and the note panel opened for typing. Press Esc to close the note
    Click to place the cursor within some text and press the Insert key - a new Insert text annotation is created and the note panel opened.
    Select some text and press the Delete key - a strikeout annotation is created (no note this time but you can add one by double-clicking)
    The idea of selecting something and 'just typing' to activate a markup event could not be retained as it interfered with the single-key accelerator mode.

  • How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now.  But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet   I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

    I am already paying a subscription for Adobe Acrobat XI Pro  Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

    Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

  • Can't find the content editing tool in Adobe Reader XI

    The website lists XI as being able to edit content. I have checked all of the help topics and they say that it should be under tools. But all that is listed is: Export PDF, Create PDF, Send Files, and Store Files. Do I have to download the content editing tool? How/where do I do that?

    you are mixing up Adobe Reader (free) and Adobe Acrobat ($$)

Maybe you are looking for