Labview crashes when 16 bit images are sampled with 1394 camera

Hello! We are using a Basler A102F camera and when we use the 16 bit format Labview is crashed. There are no problem when using the 8 bit format. It crashes also when using the scalable mode (full camera chip). We are using "Grab.vi" in the program.
There are also some problem when using MAX and these formats.
Please help us.

Some combinations of settings are not valid for cameras. I would make sure the combination you are using works properly in MAX before trying it in LabVIEW, because if it doesn't work in MAX it will never work in LabVIEW.
Check the camera manual and see if the combination you are trying to use is valid. I suppose some settings may not be compatible with the IMAQ firewire drivers even if they are valid to the camera, but I'm not sure.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

Labview crashes when creating large image files

I have a problem with Labview 6.0.2( I've tested evaluation version 7.0 too).
I'm constructing a very large image, for example: 4500x4500 pixels. Labview crashes when converting the pixture to a pixmap. The image is fully constructed on my screen (in a picture control), but when converting it to a pixmap (for saving the image in a known format (bmp, jpg, tiff)), Labview crashes.
I did some testing and when the number of pixels exceeded the limit of 2^24(16777216), the file 'image.cpp' crashes on line 1570. The vi to convert it to a pixmap is: P'icture to pixmap.vi'
Does someone know a workaround for this problem? Or is there a fix for it?
Thank you!

I've tested the 6i version of my VI in Labview 7.0 evalutation version. It raised an error but not the same error:
d:\lvworm\src\lvsource\compatexport.cpp(37) : DAbort: Called a routine not in the compatibility LVRT table
$Id: //labview/branches/Wormhole/dev/lvsource/compatexport.cpp#11 $
0x004BD4CB - LabVIEW_Eval + 0
0x0EB710D9 - lvs248 + 0
0x094C87A0 - + 0
So i replaced the picture VI's with the 7.0 evalutation version VI's, and it worked. It is now possible for me to construct very large image files!
I see no attached VI to test. But i guess it is also solved in Labview 7.0
I used this file to convert the picture to image data:
C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib
\picture\pictutil.llb\Picture to Pixmap.vi
And this file to convert image data to bmp:
C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib\picture\bmp.llb\Write BMP File.vi
I guess i have to write a workaround for this problem:
divide the picture in blocks of 4096 x 4096 and then merge the image data arrays of the bloks together.

Firefox crashes when too many images are opened

Okay, so, a problem that appeared in 4.0 for me, and hasn't gone away ever since.
The problem is basically summarized in the short description - whenever too many heavy images are in the browser's tabs simultaneously, it slows down to a halt; then sometimes as I scroll it fails to redraw the page, with black non-redrawn area increasing as I scroll and disappearing as I change tabs back and forth.
After a dozen seconds of such sad behaviour, the browser crashes.
Sometimes, however, things go better. And it just crashes.
The problem can be easily replicated with Save Images extension, say, on any photo hosting, or by opening
http://danvolodar.livejournal.com/friends/big_picture
It should be noted that 3.6 never had that problem, and opened pages where I aggregated thousands of images, - slowly, of course, but it ''did'' work. 4 and 5 do ''not''.

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

Why does LabView crash when I run it in parallel with a temp/ RH logging probe?

I am running LabView 6.1 on windows 95. Up till now I have had no problems. However, we recently acquired a Temperature / Humidity probe which plugs into the Com1 port of the computer and logs the data using it's own software. Since then, when the two programs are used together, eventually LabView crashes with the following error message: Failure, 'image.cpp, line 5793.
Can you tell me why this occurs and what the solution is?

Taking a shot at this. It could be because the two programs are trying to access the same type of logging program(excel??). Only one link can be active at a time or they crash. Try running it without saving the data and see if it crashes.

LabVIEW crash when saving from LV2012 to LV2011 with express VI and reopen in LV2012

Hi all,
Preconditions:
Save the "Meas Angular Position-Buffered-Cont-Sync AI Sample Clk.vi" for a previous version of LabVIEW, in this case from LV2012 to LV2011
Reopen the LV2011 VI in LV2012 according to the steps below.
Steps to get it to crash:
Unzip Crash.zip
Open the "Meas Angular Position-Buffered-Cont-Sync AI Sample Clk.vi" and from there double-click (open) the "PulsedDerivative.vi" and from there double click the "Derivative dX/dt" express VI.
LabVIEW crashes!!
Alternatively when LabVIEW does not crash:
Unzip Crash.zip
Open "PulsedDerivative.vi"
Inside the VI double click the "Derivative dX/dt" express VI.
LabVIEW does not crash?
Some compiler bug?
Br,
/Roger
Solved!
Go to Solution.
Attachments:
445b4df5-fd64-49a2-8302-f8ddf06af2d3.zip ‏62 KB
Crash.zip ‏166 KB

Hi Roger,
Thank you for reporting this. I have filed CAR 390673 to our developers.
Regards,
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments

Imovie Crashes when Editing? Something to do with my Camera?

hi!
I just recently got a macbook for my birthday. Its brand new and it has imovie 11. I been having trouble whenever i edit my movies that where imported from my camera. When i film on my webcam built in and edit, it dosent crash. But when i use the video from my camera it does. I dont understand. I been on the phone with apple care plently of time and they cannot solve this problem. they said it had somthing to do with the software on my camera? I talked to sony and they said there was no update for my camera which is a Sony Cybershot DSC-W530. I just want to be able to import my video from my camera and edit them without having my brand new computer crash:(
Help!!!!!!!!!!

[Have you seen this article?|http://support.apple.com/kb/TS2558]
It suggests importing at 960x540.
If you prefer to edit at full 1920x1080 (and why wouldn't you?), get the free app called MPEG Streamclip and convert the h.264 files from the Canon to Apple Intermediate Codec in 1920x1080 (e.g. current dimensions). This will produce a larger file because the Apple Intermediate Codec uncompresses the h.264 so that every frame is a full frame. However, you can edit in 1920x1080 with no crashes.

LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.

Hello, LV 8.2.1 notes indicates the following bug fix:
43SAIR2A Fixed an issue where LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.
I am running this version, and still have this behavior. Is there anything I may be missing, and/or certain circumstances that may still be causing this?
thanks in advance,
Darren

Darren:
I looked at the CAR ID that you mentioned and the issue has been resolved in LabVIEW 8.2.1. To verify something similar, I ran the attached VI and things worked just fine. Please feel free to send me the steps to follow to reproduce the issue you are running into in 8.2.1.
Regards,
Rudi N.
Attachments:
MixedGraphs.vi ‏15 KB

Why does LabView crash when unloading my DLL (reentrant calls)?

I have written a DLL in Borland Delphi using multiple threads that exports several functions (stdcall). I am using LabVIEW 6i on a WinXP machine. All functions in the DLL work as expected and return correct values. Everything works fine if I set all Call Library Function Nodes to 'UI-Thread', but as soon as I set one Function Node to 'Reentrant', LabView crashes when I close the VI after it has been executed. I assume the error is caused by the DLL unloading mechanism of LabView. Other C++/Delphi programs using the DLL reentrantly work fine, this only occurs in LabView. In which thread does LabView call FreeLibrary/DLL_PROCESS_DETACH? Has anyone experienced similar problems?

I have never run into this situation myself, but I do know that calling a multi-threaded DLL or CIN from LabVIEW does depend upon the following criteria:
If your CIN/DLL doesn't have any global data storage (global variables, files on disk, etc.), AND it doesn't access any hardware (register-level programming) AND it doesn't call any functions/DLLs/Drivers that are thread-unsafe.
OR
Your CIN/DLL protects (with semaphores or mutex's) access to those global resources.
OR
Your DLL is only called from one, non-reentrant VI
OR
Your CIN is only called from one, non-reentrant VI AND you don't access any global resources from CINInit, CINAbort, CINDispose, etc. procedures.
Hopefully this information can help you out in some way.
J.R. Allen

Firefox sometimes crashes when seraching normal images on google image.

Firefox sometimes crashes when searching normal images on google and It always crashes when searching images of large size. It stops responding i.e display hangs while scrolling. While clicking on other tabs to activate only title bar status changes but display remains the same corrupted google images. It does not close itself. It started only after google has changed its image search page. I dont want to switch to classic image search.Kindly help.

You can try disabling the "AVG Safe Search" extension (if you have it.)
1. Go to 'Tools' 
2. Click 'Addons' 
3. Go to the 'Extensions' tab 
4. Find 'AVG Safe Search' and disable. 
5. Restart FF and test Google image search.

LabView crash when intensity graph is in P6 of tab control

Any available fixes for LabView crash when intensity graph is put on page 6 of tab control and right-clicked??

Michael,
This has been fixed in LabVIEW 6.1.
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

LabVIEW Crashes when Opening Project

Hey Guys,
I'm running into an interesting issue where LabVIEW crashes when opening a project. This is the second time I've run into this issue, on the same project. To get around it the first time I simply deleted and re-made my project, but since it's happened again, I need to figure out how to debug it. The symptom is that LabVIEW will crash when opening the project (sometimes I can see the "vi loading" screen) without any indication that crash has occured. It doesn't even launch the error reporter, the process just dies. Anyone know how I can go about debugging this?
Solved!
Go to Solution.

xkenneth86,
What version of LabVIEW? Have you ever had previous versions of LabVIEW on your computer? Can you attach a screenshot of the crash?
David H.
National Instruments

LabVIEW crashes when I save changes to a particular VI.

LabVIEW crashes when it tries to compile a particular VI. I have managed to get it to work a couple of times by changing a few things and making some subVIs, but the problem keeps returning.
Is there some way to fix this or clean the VI of whatever corruption keeps occurring?
Thank you,
David R. Asher

I can think of address/hardware conflicts or something that LabVIEW cannot provide an error message. I would go with hardware/address conflicts.
Try renaming the file and executing it stand-alone. also try making it as a subvi and run the toplevel code.
Kudos always welcome for helpful posts

Some images are showing with some red color ¿how do I return to original colors?

I`m using Mountain Lion and everything works right. Only some images are showing with a redish color. The first example is my cover photo in fb. When I click it, it returns to the original color. Anyone who has this problem and know how to fix it?
This is fb cover preview:
This is the original, when cliked:
It happens with some thumbnails too.

Hi Klaus,
this didn't solve my problem but helped me choose Firefox over Safari.
thanks for the reply.
mark

What cameras are compatible with the camera connection kit

what cameras are compatible with the camera connection kit and ipad2

I also recently bought the camera kit and found that it worked fine as long as you don't format the SD card using PC. Once I re-formatted using my camera I could once again upload my photos. that was until I switched formats to Adobe RAW, it seemed unable to upload again. So I switched to S RAW and that worked fine. Sometimes my kit won't upload photos but I find that by just re-inserting the card it works fine.
Haven't tried video yet, but I recently learned that the devices are quit sensitive to the "Format"(that needs to be FAT32, or exFAT- but in this instance it needs to be formatted by a Mac).
Good luck

My iPad doesn't recognise video files when I connect my sd card with the camera connection kit. It only recognises photos from the same card

My iPad will only recognise photos when I connect an Sd card with the camera connection kit. It doesn't recognise video clips from the same card?!

Most probably because your camera records videos into MTS files, which aren't cmpatible with iOS. Read http://www.iphonelife.com/blog/87/playing-back-1080p60i60p-non-mov-videos-right- your-camera for more info and the alternatives (preprocessing ("remuxing") on a desktop etc); don't forget to follow the iVI review link at the bottom if you have a Mac.

Labview crashes when 16 bit images are sampled with 1394 camera

Similar Messages

Maybe you are looking for