Labview using Report generation toolkit in 2011 run time engine

is that possiblity to run the word in labview using Report generation toolkit in 2011 run time engine

It is possible to use the Report generaion toolkit with the run time engine. But you will have to include a lot of VIs from User lib since the report generation toolkit uses a lot of dynamically called VIs and classses.
Certified LabVIEW Architect
Certified Professional Instructor

Similar Messages

Problem building application using Report Generation Toolkit, LV 2011

I'm using LabVIEW 2011 under Windows 7.
I tried to use Application Builder to create an executable from a large body of code. One thing the application does is load VIs into a subpanel and run them.
Application Builder created the executable and gave no error message. The built application ran except that it couldn't run any of the dynamic VIs.
I finally succeeded in doing a screen grab on a transient dialog (about 1/10 sec. appearance). The dialog showed an attempt to load <vilib>:\Utility\NIReport.llb\NI_report.lvclass.
In one dynamic VI I commented out the call to the only VI that uses the Report Generation Toolkit (called only from dynamic VIs, all of which call it). Sure enough, when I built the application with that change and ran it, the dynamic VI that didn't invoke the Report Generation Toolkit did successfully load into the subpanel and run.
So, trying to prove to myself that that was the only problem, I wrote a VI that does nothing but load a VI into a subpanel and run it. User can choose one of two VIs: one that doesn't call the Report Generation Toolkit (or do much of anything), and one that does. Both VIs run fine standalone.
The not-much-of-anything VI loaded and ran in the subpanel. The other VI didn't--the same dialog, mentioned above, popped up for 1/10 second or less. Screen grab is attached.
When I included LVClass and NIReport.llb folders in the project (from vi.lib\Utility: Snapshot folders), and "Always Included" those folders (per a suggestion on this forum from a few years ago), the result was the same. The result was also the same when I included either one of those folders but not the other. Likewise it doesn't matter whether I add the dynamic VIs as "Always Included" or not.
Another piece of information that may be pertinent: when adding the NIReport.llb folder, I got a message that it was impossible to add a certain VI that's part of some report-type class, because a VI of that name already existed in the project. Screenshot of that dialog is also attached.
VIs and project file are also attached along with the two screenshots. I hardcoded VI paths, so put everything into C:\Testing if you want to see what the code does--or hack as desired, etc.
I will be deeply grateful for any help! And I apologize in advance if there's already some exact or close-enough solution posted--but I doubt there is. I looked around.
Thanks very much,
mws
Attachments:
Test-App-Build.zip ‏336 KB

Hi again,
If you extract all files in the original zip attachment to a folder called C:\Testing on a Windows 7 machine running LV 2011, and then use the build script within the project file to build the application, you can run the application and see what happens. You can also play around with the build parameters, rebuild, run, and see what happens then. You can also open my VIs and see what I'm doing.
The application lets you pick one of two dynamic VIs to run in a subpanel. One VI contains calls both to Report Generation VIs and some functions from the Advanced File Functions palette. The other VI does not.
When you pick the first VI to load and run (the one with the Report Generation and Advanced File Functions calls), it loads into the subpanel but is not executable.
When you pick the second VI to load and run, it does load into the subpanel and execute. So there's nothing wrong with the way I load and run a VI in the subpanel.
In the development environment, the whole thing runs with no problems.
Evidently the built application has problems resolving paths of something called by Report Generation VIs and by the Advanced File Functions I use.
I've done a lot of experimenting and no luck. I've looked in forum archives, etc. etc., for possible solutions. I'm hoping there's some simple solution I've missed.
Thanks very much for any help!

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit

How to add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit. Assume like my test data is like below:
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7
The above graph generated manually in excel. I want to generate the same using excel report generation toolkit. when I use Excel Insert Graph.vi where the input data is 2D array with numeric data but here labview converts the empty cells (eg.x -axis 1,data1- is empty) as zero and while plotting i am getting zero for empty cell values.
Can anyone please help me on how to plot the graph without adding zero for empty cells?
Thanks&Regards,
Bharathi T
TE
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7

Hi Bharathi,
The Excel Insert graph function takes in only 2d arrays as inputs. Since arrays can only have numeric values, any table with a null string is read as 0. Now to get a plot like you mentioned, you could read the table and replace blank Strings as NaN. NaN values in an array when plotted do not appear in the excel sheet. For reference I have attached a sample vi to help you understand.
Regards
Vijetha Nuthakki,
Applications Engineer
NI Systems India
Attachments:
Excel_graph_multiplot.vi ‏21 KB

Error when using Report Generation Toolkit

Hi, all,
I am using Report generation toolkit to generate a report in either
word or excel format. But i even can't run the "new report.vi". It
returns an error code of "Bad variable type (-2147352568)", and seems
this error comes out from the "call by reference" after the
word/excel's "open VI reference". I have checked the folder
"C:\Program Files\National Instruments\LabVIEW
6.1\vi.lib\addons\_office", there are "_exclsub.llb" and
"_wordsub.llb". The respect VIs are all inside. I don't know why there
is such error. Currently i am using labview 6.1, Microsoft office 2000
and Windows NT 4.0.
Your kindly help will be appreciated very much!!!
Thannk you in advance!! ^_^
Your sincerely,
celery

So, if you place just New Report.vi on the Block Diagram, wire in the report type and run it, it gives you this error? Do the example programs which ship with the toolset give this same error also? If so, I would just reinstall the toolset first and see if that helps. It sounds like the entire install is corrupt.
J.R. Allen

How to write data which i am reading from spectrum in excel using Report Generation toolkit.

Hello All,
I wrote code for reading data from Spectrum analyzer and also for writing in excel using report generation toolkit. When i run program values get read and excel sheet opens also but i cant see anything written in it.
So if anyone can help me in this i will be very gald. I am attaching screenshot of my program and also attaching .vi file. As i am using drivers you can see some of vi.
Thanking You,
Pallavi
Solved!
Go to Solution.
Attachments:
Channel_Power.jpg ‏123 KB
Channel Power_Toolkit.vi ‏64 KB

Hi Palavi,
you try to select a specific worksheet what is not existing, therefore just select "Channel Power" (and not Power Channel) and it should work for you.
Regards,
Tobias

Running macro on Table using Report Generation Toolkit and Office 2003 Incompatible!!!!!!!

Hi,
I am using some functions under the Report Generation toolkit (LabView 7.1). We recently updated our test PCs from Office 2000 to 2003. The "WORD IMPORT MODULE.VI" returns error code -41113 when used with Word 2003. No problem on Word 2000.
In fact even the example VI available under Find Examples - Run Macro on Word Table fails and returns error code -41113 when "WORD IMPORT MODULE.VI" is called on Word 2003. Word 2000 is OK.
Any one faced this problem???? Any solution to this problem??
I would greatly appreciate your feedback / suggestions.
Thanks,
Mim

darren,
thanks for your reply.
After checking the the property "Trust access to Visual Basic Project" , I get the following error message:
Exception occured in Microsoft Word, Unable to run the specified macro. Help Path is C:\Program Files\Microsoft Office\OFFICE11\1033\wdmain11.chm and context 37401 in Word Run Macro.vi->SetFirstRowAsTableHeaderforWord(Macro).vi->Generate Report.vi
I can run the macro directly from Word.. no problem running macros in Excel dirently either. I get error message only when running macro from LabView. So, I doubt if it is an IT issue.
You don't have a problem with Word 2003 and Word Import Module.vi???
I am attaching my Vi-Report Generation.vi and the subvi. I would so much appreciate if you run ReportGenerate.vi on your PC and let me know if there is a problem.
Many Thanks for your help.
Mim
Attachments:
ReportGeneration.zip ‏75 KB

Error -2417417851 using Report generation toolkit

I try to use the Report Generation toolkit (Version 1.0.1) for MS Office und the example "Generate Report from Template (Excel).vi" return an Error -2417417851
I run Labview 6.02, on Win2000 German, and use Office 97 (Everything is installed (included MS Graph))
Did someone experienced such a problem and found a solution?
Thank you for your Help!

Is LabVIEW and Office both German? Under Control Panel >> Regional Options >> General, is the language set to German? How about under Regional Options >> Input Locale? Reboot if you make any changes.
I would suggest reregistering the nireports.dll. It is located in the National Instruments\Shared\NI Reports directory.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/4f811a9b23f1d46e862566f700615b7a?OpenDocument
Next, mass compile (Tools >> Advanced >> Mass Compile...) the LLB's in the \vi.lib\addons\_office
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Labview 2013 report generation toolkit word 2010 insert table problem

Hi,
I am currently evaluating LV2013 with respect to the report generation toolkit for use with word 2010. My Vi/program won't insert the correct table and gives me an error message. see below:-
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Word Table save.vi
I have since run the following word example.vi provided by NI within LV2013 office examples:- Growable table.vi. this gives me the same error!
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Growable table.vi
It would seem that regardless of my own Vi there is a fundamental problem in the office example vi.
I have found examples of a similar problem in LV2011/2012 but the work around code doesn't seem to match the LV2013 vi's code for a direct replacement.
Can anyone help/shed some light on this?
Thanks in advance,
Dan.

Because the upgrade of Word from 2007 to 2010 I needed to upgrade an existing application from LabVIEW 2009 to 2013. This didn't work because of the insert table error. I discovered that the problem is the vi called "Word_Insert_Table.vi" located in the ..Program Files (x86)\National Instruments\LabVIEW 2013\vi.lib\addons\_office\_wordsub.llb. There is a "Cut" command implemented, this command removes the created cell instead of clearing it. Therefore the table will be filled half and then returnes with an error. I have removed this command. I have posted the changed vi (LV 2013).
Attachments:
Word_Insert_Table.vi ‏30 KB

Problem writing to excel file using report generation toolkit

hello everyone, i have this report generation toolkit... and i want to output DAQmx Analog I/P data on to an excel sheet. the DAQmx is programmed to collect
data at 3samples/sec. however, when i see the excel file that Report Generation Toolkit generates, the time stamp is updated every second instead of every 0.33sec.
can anyone please help me? i am using the MS Office Report Express VI.
Now on LabVIEW 10.0 on Win7

@All, I got rid of the express VI, decided to work on the custom low level VIs instead. however, i have a new problem now...
I have a case statement wherein, the user selects if he wants to start generating a report. once the program enters tat loop, the program speed reduces!
can anyone please tell me why is it happening? i ahve attached the vi... also another question.. in this VI, i am capturing the unwanted data into the graph as I am indexin the graph input. how can i make a logic
that the graph captures the data only when I am switching the CREATE REPORT button (which is in the while loop). is there a way that I can append the data to the graph without creating a new graph every iteration? please let me know
thanks
Now on LabVIEW 10.0 on Win7
Attachments:
Untitled 7.vi ‏75 KB
Untitled 7.JPG ‏99 KB

How to get data from an existing Excel file using report generation toolkit

I'm trying to use the Excel Get Data vi from the report generation toolkit, but i can't figure out how to turn a browsable path into the right type for the VI. I've tried using the New Report.vi, but that doesn't work unless you use a template. It won't open an existing excel file and make it an open report to pull data from.
Essentially, i have a bunch of excel files that have data in them and i want to use a VI to analyze the data. So, i'm trying to pull in all the data directly from the excel file so i don't have to reproscess them all into text so i can use the more standard spreadsheet VIs. But to even convert the excel file programtically in labview won't i still need to be able to open the excel file and get the data?
Solved!
Go to Solution.

I C.
Got it,
the reason why I can view it using my Excel file because its in .CSV.
I open Microsoft Excel to open .CSV file.
But you can also open .csv file with notepad.
So, you cannot open .xls with Read Spreadsheet File
I learn something everyday
Best regards,
Krispiekream

Error Showing While Using Report Generation ToolKit VIs

Hi All,
           When I use report generation VIs Like Excel Easy Tables its showing following errors and i am not able to contiune using the same,
C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\utility\NIReport.llb\Set Report Font.vi
    - LabVIEW 8.0 changed a constant that was wired to a Case structure to a hidden control to maintain compatibility with LabVIEW 7.1 and earlier.
    - LabVIEW 8.0 changed a constant that was wired to a Case structure to a hidden control to maintain compatibility with LabVIEW 7.1 and earlier.
what might be the issue, i am using LabVIEW 8.2

Hi,
In
LabVIEW 7.1 and earlier, subVIs could be kept in memory by wiring a
constant to a Case structure and placing the subVI in a case that would
not be executed. For example, you could wire a True constant to the
Case structure and place a subVI in the False case of the Case
structure, and LabVIEW would load the subVI along with the calling VI.
However, from LabVIEW 8.0 onwards, the case structure is optimized to remove code that is not going to be executed. Changing the
constant to a control ensures that this VI behaves as it did in LabVIEW
7.1 and earlier. If the intent is not to keep the subVIs in memory, you
can change this control back to a constant by right-clicking the
control and selecting 'Change to Constant' from the shortcut menu. The
proper way to keep a subVI in memory without calling it is to use a
Static VI Reference.
Good Luck!
Warm regards,
Karunya R
National Instruments
Applications Engineer

How do I get the last COLUMN in an Excel Sheet using Report Generation toolkit in LV7.1?

I am trying to get the last column in an Excel sheet using the Report Generation toolkit. The function "Excel Get Last Row" does not give last column info. Is there a function that will do this?
Thanks

Hello –
I think the following example program might be helpful to get you started programming your application.
Get Excel Data from Specified Field.
Hope this helps!
SVences
Applications Engineer
National Instruments

Is it possible to insert data into two Excel worksheets using Report Generation Toolkit?

I'm using the toolkit to insert data into two separate worksheets in Excel using named cells. The problem is that it tends to favor one sheet or the other. In other words, one sheet will have data and the other no data and vice versa. (Sometimes I get data in both sheets.) Is there something I can do to clear this up or is what I'm trying to do unreasonable? I would like to use two worksheets so one sheet receives text and data. The other sheet is used to format the data into a printable report. (i.e. using Excel's CONCATENATE function) The second (report) sheet is also used to receive plots (JPEG files) from LabVIEW. I'd send the plot images to the first sheet, but I can
not see a way to automatically transfer images from sheet to sheet. I'm using LV 7.1, Win2000 and Toolkit v.1.0.1

Hi,
You can use the "Excel Get Worksheet.vi" under All Functions >> Report Generation >> Excel Specific >> Excel General to specify a particular worksheet as the current worksheet. Then, you can specify which worksheet you want to write to in your VI.
Let me know if you have any further questions and good luck!
Kileen C.
NI

When i am trying to create a report(using graph) in Word97 using Report generation Toolkit from Labview it's giving error in word import Module.vi that no such interface is supported could anyone help me out to solve this problem

Word import Module.vi is trying to call Vb project and VB components thru active X controls when it's trying to call Vb components it's giving the error no such interface found..I am using Labview 6,MSoffice97,Graph8

Hi Adam,
It seems that there have been a couple other instances of the same error occurring and the problem is a conflict that occurs with the Office 97 only. Somehow the MS Office type library has been modified and this is causing incompatibilities with MS Office 97. Have you installed any other application on top of MS Office that plugs into MS Office tools – Adobe Acrobat, Visio, Reflection?? If so, you will want to see about uninstalling or reinstalling those utilities and then reinstalling Office 97 to restore the original MS Office 97 type library.
Also, if you have a newer version of MS Office, I would highly recommend upgrading your computer. It seems that this problem is only with Office 97 and later versions of Office do not have this issue.
Thanks again for bringing this question up.
Kileen

Labview using Report generation toolkit in 2011 run time engine

Similar Messages

Maybe you are looking for