LabVIEW Video Waveform Source from Video Test Image for Multisim simulation

Hi,
I want to simulate a video amplifier circuit in Multisim. I need a Composite Video Signal Source for feeding the input to the amplifier. In one of the application note I saw that LabVIEW can be used to create Video Waveform Source from Video Test Image (BMP). I've attached the sheet for reference. My questions are below:
1. Do I need to create the Video Signal Source in LabVIEW or is it already available with LabVIEW library?
2. How to call/access this Video Signal Source from LabVIEW for simulation in Multisim?
3. Any examples available?
4. Which versions of LabVIEW and Multisim supports this feature?
Any help is truly appreciated.
(Topic of the Application Note: Circuit Design Using Simulation and Virtual Instrumentation, Applications in Biomedical Engineering)
Regards,
Sinoj
Attachments:
circuit_design_simulation_and_virtual_instrumentation_page26.pdf ‏314 KB

Hi Mahmoud,
Thanks for your reply.
I searched for the VI 'Simple create composite signal from BMP image.vi' on internet (since it is named so in the Application Note), but could not find. I've some experience with LabVIEW, so I hope that once I get this VI I can plug-in to Multisim. But in order to add it to 'lvinstruments' folder of Multisim installation directory I need the DLL and LLB file (not the VI, I understand so). If these DLL and LLB files are available I think it will be easier to integrate with Multisim, otherwise I don't know what to do if I have just the VI.
Anyway attached the complete Application Note.
Regards,
Sinoj
Attachments:
circuit_design_simulation_and_virtual_instrumentation.pdf ‏2293 KB

Similar Messages

  • Is it possible to transfer video to iMovie from video app (not the library)

    Is it possible to transfer video to iMovie from video app (not the library)
    IPAD-IOS

    If you're asking if you can import video fror the iOS Videos app to iOS iMovie, the answer is no. You can only import what is in the camera roll.

  • Why can't I share any video via AirDrop from Video App

    I have some videos that are stored in Videos app. But there appears to be no way to share these from one device to another. Why not?
    Is there a simple workaround?

    The Video app generally contains videos that were purchased or rented from the iTunes Store. They are copy protected and can't be shared.

  • Set of RAW file test images for regression tests

    Hello
    Does anybody own a broad range of test images which can be shared where most RAW file formats are covered to help making a new plugin stable or do regression tests over different versions of Lightroom or plugin revisions?
    Thanks,
    Daniel

    Hi Daniel,
    I haven't seen anyone pull together a complete set of RAWs for this type of testing. Most people only need a few samples of different manufacturers just to ensure their code works OK. I'm curious to know what type of Lightroom plugin would require as an exhaustive a set of tests as you are suggesting.
    You've already looked at the dcraw team's work. Might also want to look at Phil Harvey and his exiftool work to see if he has a set of test files available. Or RawTherapee though they might not bother with their own testing since I'm pretty sure they use dcraw under the covers.
    I suspect you will need to do some downloading of files from review sites unless one of these big players has files ready for testing. Copyright issues might prevent that. Photography Blog makes it as easy as any of the sites I've found to download RAW sample files so keep them in mind if you run out of luck.
    Matt

  • Best practice data source from ECC 6.0 for legal consolidation in BPC NW7.5

    Hi there,
    after scanning every message in this forum for "data source" I wonder if there isn't any standard approach from SAP to extract consolidation data from ECC 6.0. I have to say that my customer is not using New g/l so far and therefore the great guide "how to get balances from ECC 6.0 ..." does not fully work for us.
    Coming from the old world of EC-CS there is the first option to go via the GLT3 table. This option requires clever customization and the need to keep both GLT0 and GLT3 in line. Who has experiences regarding maintenance of these tables in a production environment?
    We therefore plan to use data source 0FI_GL_4 which contains all line items to the financial documents posted. Does this approach make sense or will it fail because of performance issues?
    Any help is appreciated!
    Kind regards,
    Dierk

    Hi Dierk,
    Do you have a need for the level of detail provided by the 0FI_GL_4 extractor? Normally I would recommend going for the basic 0FI_GL_6 extractor, which provides a much more manageable data volume since it only gives the periodic activity and balances as well as a much smaller selection of characteristics. Link: [http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
    Despite this initial recommendation, every client I've had has eventually had a need for the level of detail provided by the 0FI_GL_4 extractor (or the New G/L equivalent - 0FI_GL_14). Most BW systems can handle the output of the line-item extractors without much issue, but you should test using production data and make sure your system sizing takes into account the load.
    The major problem you can run into with the line-item extractors is that if your delta somehow gets compromised it can take a very long time (days, sometimes weeks) to reinitialize and this can cause a large load in your ECC and BW system. Also, for the first transport to production, it is important to plan time to initialize the delta.
    Ethan

  • Split audio from video doesn't split video at the same point ?

    When I split the audio from a video in GarageBand I would like the video to be split at the same point (so that I can insert audio in between without everything getting out of sync).
    Is this possible?
    (I don't want to use iMovie since that turns my 150 MB mov file into a 8 GB file..take ages to import)
    The reason I want to insert audio in between video fragments is that I am creating an audio description of a tv series for a blind friend. I watch the video, pause that, and describe. Then continue.
    If I can split both the video and "audio from video" at the same point and drag those to the right, so there's room to record something in between (then in the end I'll just drag it all so that the parts join up, delete the video and merge the audio. I hope.)
    Thanks in advance!!

    I figured out how to reset the Youtube video upon hiding thanks to Heathrowe's answer and FigFrance's contribution to the thread found here:
    https://forums.adobe.com/message/4979969#4979969
    The secret was adding .empty() to my video container.  Here is my functioning button code:
    Show Video:
    //code to embed youtube into symbol
    var youtube = $("<iframe/>");
    sym.$("video").empty().append(youtube);
    youtube.attr('type', 'text/html');
    youtube.attr('width', '640');
    youtube.attr('height', '360');
    youtube.attr('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');
    youtube.attr('frameborder', '1');
    youtube.attr('allowfullscreen', '0');
    // Show an element
    sym.$("video").show();
    Hide Video:
    sym.$("video").empty();
    // Hide an element
    sym.$("video").hide();
    Brandon

  • Capture image from video live streaming

    Hi everyone ^^ 
    I have a question in my attached vi, I am able to have a live streaming video from my build in PC camera and take a pic from it too, the problem is it runs perfectly for the first time but the mint I press the button the image froze >< , I can not have my video back even when the case structure is fasle. Hope someone can help me with that 
    thanks a lot ^^ 
    Solved!
    Go to Solution.
    Attachments:
    Image Aquairing 2.vi ‏53 KB

    Hi ReChan,
    -IMAQ Snap Configures, starts, acquires, and unconfigures a snap acquisition.
    -For IMAQ Grab you're configuring initally. So, whenever you click boolean-imaq snap captures image and unconfigures the IMAQ session.
    -When you try to grab again, it will throw an error because IMAQ session isn't configured.
    -The mechanical action of boolean you kept as switch when pressed-it'll stay high-which results asking user for saving an image. instead i changed it to latch.
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13
    Attachments:
    Image Aquairing 2.vi ‏53 KB

  • How to extend audio from a video clip over an adjacent still image

    I'm in iMovie 11.  My project looks like this: video A, transition, still image B, transition, video C.  I want the sound from video C to start playing while still image B is on the screen.  I tried following the iMovie 11 help instructions for extending a video clip's audio.  I click on video C and open the precision editor.  From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle.  The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening.  Either the video and audio move together, or nothing moves.
    When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
    What am I doing wrong?

    I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

  • It`s possible to transmit any video source from iMac to apple TV?

    It´s possible to transmit any video source from Imac to Apple TV?.

    It must be in iTunes and compatible with the ATV (i.e. just because something plays on your computer in iTunes does not mean it will play on the device)
    Below are the compatible formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Open video in Source monitor from extension / ExtendScript?

    Hi,
    I want to write a panel extension which browses a remote asset management system, downloads proxy videos, and shows them in the Source monitor; similar to the Media Browser panel.
    However, I can't find any way of getting a local file to open in the source monitor. The script functions I have tried either expect a Premiere project, or will open the file in QuickTime Player.
    Does this functionality exist in Premiere?
    - Matt

    Oops, yes, meant to post it in the SDK forum.
    For any future Google hits --> Open video in Source monitor from extension / ExtendScript?

  • How Can I get rid of a download, it won't stop processing? Even after I have deleted image from videos?

    How do I delete a download as it won't stop processing? I have even deleted the image from videos but it is still in my download saying processing. Help?

    Hi Sanjampet,
    Yes, it was a folder from a website. It was a backup of a website (the website was hacked into at one point if that matters). I kept the backups in a folder on my laptop. I was able to delete the other backups, but this one was giving me an issue for some reason. The other day when I was having this issue and you were trying to help me solve it, it was showing that I only had (about) 158 GB of memory left on my computer, but when I was finally able to delete the folder and all of its content it was showing that I had over 250 GB of memory left. I don't understand how a website's backup folder can be that large :S Was that why I was having so much trouble doing anything with it?
    I could drag the entire folder into the trash can, but if I tried to empty the trash it would just do what was showing in the picture from my original post
    Thank you so much!

  • Capture Pictures/Images from Video

    Hello All,
    I am just getting warmed up in these forums here. I wanted to know if you could capture still images from video clips and if they are Kodak clear. I have a couple of family videos that I would like to have pictures taken from and framed. Does anybody know much about this?

    <[email protected]> wrote in message <br />news:[email protected]..<br />> Thats interesting. I had talked to a representative from Adobe and I was <br />> told it would be crystal clear of a photograph! That includes after the <br />> image being deinterlaced...<br /><br />It will be "clear."  However, the clarity of a picture is a function of the <br />original video and the resolution.  Standard definition digital video is 720 <br />x 480 pixels for a total of 345,600 or, roughly, 1/3 of a megabyte.  This is <br />very low resolution compared to what a good digital still camera can <br />produce, i.e. 4-8 megabytes.  A high-definition frame will contain 1,920 x <br />1,080 pixels, totaling 2,073,600.  A 2 megabyte frame will produce a <br />reasonable 4 x 6 photograph.

  • Importing Video from Video from GV-DV1000 NTSC Sony VTR - Image and Audio out of sinchronization

    Hi, I´m using Final Cut Express 10.1.1. and to import video, the Sony GV-DV1000 NTSC.  My Operating System is Maverick 10.9.2
    When I import a Video, the audio and video is sinchronized but when I start to edit, video and audio are not sinchronized.
    The connection from the VTR to the iMac is thru a firewire cable to a thunderbilt cable. There is a way to avoid this problem?
    Thanks for your prompt response,
    Sincerely,
    Alberto Quiros Bonett

    We have heard of some capture issues with DV and HDV.
    Most users get some success by capturing with QuickTime X.
    Try a test.
    Al

  • How do I save a still image from video in imovie '11?

    How do I save a still image from video in imovie '11?

    See this User Tip by AppleMan1958 -
    https://discussions.apple.com/docs/DOC-3231
    John

  • History of images "captured" from video

    Usually when you import an image, in the History panel you find the first entry states when it was imported eg. "Import (date time)"
    Could we have something the same in the History panel for images captured from video?  At present there is nothing there when you first check it out and you can't truely go back to the start (unless you managed to remember to take a snapshot before you touch a slider.)
    I'm using the Windows 32 bit version.  The above issue is consistent with both the DSLR (Canon 5D II) and normal video I borrowed from my Dad.

    Hi Sarah,
    Good idea. I can't promise you anything on this one but I'll raise it with the team.

Maybe you are looking for