Language Settings in Unattend.txt Win8.1 OSD not working properly

Hi fellow suffers :)
Although I am using the following unattend.txt within my OSD TS Win8.1 is still asking to confirm the "Region and Language" manually at the end of the setup (even if I am choosing english)... what am I doing wrong ?!
I am not using MDT.... any hint is really appreciated... Thanks, Markus
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Language>2057</Language>
    <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:d:/temp/boot.wim#Microsoft Windows PE (x64)" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

    <cpi:offlineImage cpi:source="wim:d:/temp/boot.wim#Microsoft Windows PE (x64)" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
It seems as if you used Windows PE as a source for generating the catalog; you should use the (captured) wim instead (allthough it should not be related to your problem).
<Language> 2057 does not look familiar. WSIM should tell you if you should use something like en-US or 0409:00000409.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

    I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
    Some please show me how to reset it.

    Here is some information from Apple:
    http://support.apple.com/kb/TS3274
    http://support.apple.com/kb/HT4057

  • Brightness OSD not working in 64 bit Windows 7

    Hi,
    After having used the laptop for a long time with a 32 bit Windows 7, I've upgraded the RAM and added an SSD, and reinstalled with a 64 bit Windows 7. Everything works great, some things even better than before (used to have occasional problems hibernating, but not anymore). However, there is one small, irritating problem:
    The brightness OSD is not working, even though the buttons do control the brightness and every other OSD is working properly, only this one isn't.
    After installing windows, I've used the ThinkVantage System Update utility to install everything. Then I tried installing all kinds of drivers seperately. So far, no luck.
    I'd really appreciate some help resolving this issue.
    Thanks a lot

    I've tried several different versions of the On Screen Display from the Hotkey Features Integration for Windows 7, including 6.60.03, 6.60.01, 6.60.03, 6.42.00, 6.24.00. And every time, it's the same thing. Everyhting works but the brightness control OSD.
    What else can I try?

  • I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    You will need to use an external DVD drive to run the disc installer that came you your machine. You can also do it with another Mac using the Remote Install Max OS X app. Finely, if you have access to another computer, you could burn the install image on a USB thumb drive, boot from that, erase the drive and run the installer.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Application Toolbar Not Working Properly. Help!

    I'm having an issue with my Mac. The toolbars and other areas of each window in each program are not working properly. There is a bunch of random apples in place of certain buttons. Its hard to explain exactly what is going on so I've attached a couple screen shots of what I'm talking about. Does anyone know whats going on or how to go back to the default settings? I'm using Mac OS X 10.7.2 Any help would be greatly appreciated.

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

  • WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

    I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
    Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
    You: Case number is 04971062
    Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
    You: OK
    Daphne L. J: Thank you.
    You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
    Daphne L. J: Thank you for waiting.
    Daphne L. J: Please confirm if the following information is correct:
    Name : Fernando Paramo
    Phone Number :
    E-Mail Address : 
    Model Number : WRT1900AC
    Serial Number : 13J10609406280
    Country : United States
    You: That's correct.
    Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
    You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
    You: But the modem is fine. No disconnections from my ISP.
    You: It is the router.
    Daphne L. J: Alright. What is the current firmware version of your router?
    You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
    Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
    You: Ver. 1.1.10.167514
    You: Latest one.
    Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
    You: That's correct.
    Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
    You: That's correct.
    Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
    Daphne L. J: Thank you for waiting.
    You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
    You: I do not want my current hardware.
    You: It is useless for my needs.
    You: I can't believe I had an older E3000 that didn't give me any problems.
    Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
    You: Cable connection.
    Daphne L. J: Who is your Internet Service Provider?
    You: A company called .
    You: How are they going to contact me?
    Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
    You: Are you paying attention to me?
    You: I already told you it's V1.
    Daphne L. J: They will call or email you. Please double check if these informations are correct:
    Name :
    Phone Number :
    E-Mail Address :
    You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
    You: I want them to contact me to my email. I can't answer the phone during work hours.
    Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
    Daphne L. J: Just in case, do you also have an alternate number?
    Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
    You: I have the one from my office in Mexico. Central Time. Any time is good.
    Daphne L. J: So, you are currently in Mexico?
    You: I work in Mexico but I have the house in USA. I live in the border.
    Daphne L. J: I see. Do you have any other questions or clarifications?
    You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
    Daphne L. J: Thank you for the information. Would that be all for now?
    You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
    You: Because this is a very expensive router that is not working as it should be.
    Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
    Daphne L. J: Would there be anything else you need?
    You: That would be it. I will wait for you to contact me.
    You: Thanks.
    Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

    FernandoRocker wrote:
    Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed).  Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

  • WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

    I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
    Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
    You: Case number is 04971062
    Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
    You: OK
    Daphne L. J: Thank you.
    You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
    Daphne L. J: Thank you for waiting.
    Daphne L. J: Please confirm if the following information is correct:
    Name : Fernando Paramo
    Phone Number :
    E-Mail Address : 
    Model Number : WRT1900AC
    Serial Number : 13J10609406280
    Country : United States
    You: That's correct.
    Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
    You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
    You: But the modem is fine. No disconnections from my ISP.
    You: It is the router.
    Daphne L. J: Alright. What is the current firmware version of your router?
    You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
    Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
    You: Ver. 1.1.10.167514
    You: Latest one.
    Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
    You: That's correct.
    Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
    You: That's correct.
    Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
    Daphne L. J: Thank you for waiting.
    You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
    You: I do not want my current hardware.
    You: It is useless for my needs.
    You: I can't believe I had an older E3000 that didn't give me any problems.
    Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
    You: Cable connection.
    Daphne L. J: Who is your Internet Service Provider?
    You: A company called .
    You: How are they going to contact me?
    Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
    You: Are you paying attention to me?
    You: I already told you it's V1.
    Daphne L. J: They will call or email you. Please double check if these informations are correct:
    Name :
    Phone Number :
    E-Mail Address :
    You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
    You: I want them to contact me to my email. I can't answer the phone during work hours.
    Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
    Daphne L. J: Just in case, do you also have an alternate number?
    Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
    You: I have the one from my office in Mexico. Central Time. Any time is good.
    Daphne L. J: So, you are currently in Mexico?
    You: I work in Mexico but I have the house in USA. I live in the border.
    Daphne L. J: I see. Do you have any other questions or clarifications?
    You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
    Daphne L. J: Thank you for the information. Would that be all for now?
    You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
    You: Because this is a very expensive router that is not working as it should be.
    Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
    Daphne L. J: Would there be anything else you need?
    You: That would be it. I will wait for you to contact me.
    You: Thanks.
    Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • Subvi does not work properly when called inside a vi

    Hello Every body
    thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
    any tips would be highly appreciated.
    thanks
    Regards
    Attachments:
    vi.zip ‏87 KB

    I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

  • MRS (Multi resoource scheduling) not working properly

    Hello All,
    We have MRS 610  installed in our landscape. We have configured it to integrate with Maintenance orders. We are facing an issue as to not all orders are reflected in the planning board though we make exact replica of orders which already exists in the planning board. Those orders which are there in the planning board doesnot reflect the changes that are done to it in PM module. I have checked all the demand related configuration settings and all seems to be fine. The inegration between PM and MRS is not working properly. Orders are getting pulled into the planning board if we run the report /MRSS/SGE_DEM_DATA_MIGRATION.
    We recently upgraded to SP4 level. Kindly help me to trouble shoot this issue.
    Many thanks in advance.
    Boby

    Dear Bob
    As far as I have understood that your problem is that the backward integration is not happening.
    That means whenever you are assigning a resource to the PM Order these alocation are not reflected in PM Order. Just check following points.
    1. Check weather you have activated back integration of PM or not !
    2. Check this under the node: Sources of Demands->Orders-> Control integration of PM/CS Orders
    3. Also make sure that you have activated back integration of demand type R3OR in the node Sources of demand.
    4. Check PM Settings related to Work centre
    5. Apply the Note 1135513 - MRS: Changes to standard for PM/CS
    integration
    Also please go through the Documentation supplied with the sofware Installation CD for MRS.
    It gives step by step activities how to proced with config.you will have to go through this documentation very thoroughly as all information is avalable .
    Also check this link
    http://help.sap.com/bp_serv603/ServInd_DE/html/index.htm
    This link gives  best practices for services industry.
    Go To Business Information > Preconfigured Scenarios > (Right hand side )>SAP ERP Scope >Scenarios - by Business Areas>Project Resource Management >Service Order with Resource Scheduling (MRS).
    This will serve you as guidance for configuration.
    With regards
    Mangesh

  • Windows 7 Brightness and Function key not Working Properly

    i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it  came with windows 8.1 preinstalled than i installed windows 7 ultimate.
    i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
    2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

    Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

  • Mouse is not working properly on a one month old HP Pavillion 15-NO28US

    I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

    Hi Kevin3047,
    Thank you for your query, I will do my best to assist you!!
    I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
    You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you  clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help.  You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
    Here is a step that may help.
    Go to the Command Prompt and right click on it to run as Administrator
    type sfc /scannow and press enter.  This will scan for corrupted files and try to repair them.
    Here are links to two documents that may aid with this process.
    Troubleshooting Mouse Problems (Windows 8)
    Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
    Would you also please try a clean boot to see if it persists. Here is  a Windows document to assist you.
    How to perform a clean boot in Windows
    If none of this has alleviated the issue, I suggest you do a  Refresh Your PC to Resolve Problems (Windows 8).
    If the issue still pesists, I would do a recovery again.  You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
    Performing an HP System Recovery (Windows 8)
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
    If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance.  They are able to remotely log onto your system to help with this difficulty.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Good Luck!!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Please fix iTunes, or let me use something else!!

    i have a mac mini which i use to sync my iphone, ipad, and nano with. itunes 11: does not sync from computer to iOS devices. i download updates on the computer and they don't get pushed out to my devices, i have to manually update on the device or go

  • How do I change my iCloud account on my iPhone

    I know i'm not the only one who ha the same prb out there, and I read a lots of stuff in the different discussions, but I want to make sure, so let me ask: my wife and I share the same store account, and somehow when I set up our two iPhones, her iCl

  • How to apply patch 118833-36 on a containerized server?

    We have a V890 running Solaris 10 that has two zones (containers) running instances of Oracle database. `smpatch' won't install patch 118833-36 in the normal manner because it's flagged as an interactive patch. The recommended procedure is to shut th

  • Issue with "Find" in Bridge when searching external drive.

    When using "Find" in Bridge (version 2.1.1.9) in CS3 to search for files on an external hard drive I must either check "Include Non-Indexed Files" or go to the external drive and build the cache for the folders I want to search. Otherwise the files w

  • InDesign CS4 and CS5 scripting on Windows 7 unstable

    Hello, have not found any solutions to our previous issues with RPC errors while scripting InDesign CS4 and CS5 on Windows 7. Even more problematic, I just installed a trial version of InDesign CS5 on Windows 7, created a small JavaScript script that