Large file handling tips Help for illustrator file larger than 3 gb

Can anyone provide advice for large file handling tips. Help for illustrator file larger than 3 gb ie how often, when, and should I clear the clipboard? are here other tips?
Thanks,
Gavin

My key tip is to EXPECT corruption. Keep every save separately so you can go back before damage (which might not be visible). Don't just keep a single old file or rely on daily backups.

Similar Messages

F4 Help for Logical file

Hi All,
i've declared a parameter where end-user can specify the logical file name. can anyone provide the code for F4 help for logical file name.
Regards
Faisal

Declare this :-->
PARAMETERS: p_apsvr LIKE rlgrap-filename OBLIGATORY.
AT selection Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_apsvr.
PERFORM get_apsvr_path.
FORM get_apsvr_path .
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_apsvr
      filemask         = '*'
    IMPORTING
      serverfile       = p_apsvr
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_apsvr_path

Best practise around handling time dependency for flat file loads

Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.

Bump!

I am sending a single-page poster in Illustrator to a commercial printer. There are several placed graphics and I want to choose the correct file-type to keep my Illustrator file nice and small.

I am sending a single-page poster in Illustrator to a commercial printer. There are several placed graphics and I want to choose the correct file-type to keep my Illustrator file nice and small.

Printers like PDFs, but you should consult with the print vendor before you save the file in any particular format. Each vendor is different and have an established workflow. They may not accept JPGs. If the poster prints offset, you will need to supply the appropriate resolution per their request or what they require. If the poster is large format or grand format, then they will or should know what resolution is appropriate. However, large format inkjet only requires 144-150ppi at 100% final size. Try to get in the habit of consulting with the print vendor early on so you end up supplying what is needed.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

Help for raw files

How do I make Canon 5D MarkIII compatable with Lightroom 3 and cs5 (raw files)

Excuse me, but Camera Raw 6.7 handles Canon 5D Mark III files directly, and it works with Photoshop CS5, so Mylenium's answer is incorrect.
You just need to update your Photoshop CS5 installation to include Camera Raw 6.7. You may be able to do that by simply going through Help - Updates.
You can check your facts starting here: http://forums.adobe.com/thread/311515
Which leads you here: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Note specifically the "What version of Camera Raw started to support my camera?" section, which states:
-Noel

HOW: File handling - Date and time of file created/modified

Hi all,
Is there any way by which we can find out the date and time of the file created in operating system using file handling through PL/SQL.
Eg:-
I have a directory in which I am storing some files, and for a given file name I must know when that file was created, i mean date and time.
Might be there is some simple way, please help out.
regards
CJ

http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584#73995149457661
Remember to get the correct privs (java privs) on the directory.
Mette

How to make PDF file size smaller from an Illustrator file without changing the quality or size (length and width) of the file?

Is there a way to make a 30x42 size (40 GB) Illustrator file as a PDF but make the file smaller in size (able to email to clients) with out compromising the quality of the file or the size of the file?

If you are working in RGB you can embed a colour profile. Embed ICC Profiles is one of the Acrobat save options. It will increase files size dramatically.
When you save your pdf you can choose the compression method for placed images. Default is ZIP which is really no compression at all for pixel images. Instead you should opt for JPG compression (of varying degree according to how sensitive the images are to compression).
You should also examine the other Acrobat save options. To minimize file size you should not have any of the options checked (Preserve Illustrator Editing Capability, Embed page Thumbnails etc. etc.).
40 gigabytes for a file like the one you show is ridiculous. Did you maybe embed the placed images? If so, don’t. Keep them linked unless you really need to embed them.

Sharepoint Online - File Associations - Create association for .sql files in SPO365

I maintain a document library as a script repository with .sql scripts. we refer to these often for operational processes.
unfortunately, we are currently only given the option to download these files from SharePoint Online.
Is it possible to create an association in SharePoint Online to have these files preview as text or to at least open them in SSMS or Notepad.
caveat = we dont want to change the default OS association for these files. SSMS is fine for the desktop, but in SPO365 a text viewer would be ideal as it would most easlily facilitate a copy and paste.
Thanks
G'B
Scott Davis

Hi,
According to your description, when you removed the Read List and Read Item operations and created them back based off of the view and recreated the external list, you saw all the columns you wanted.
Then you can modify view to choose the columns which you want to display.
The issue is, now the item picker and other operations that did not change seem to be going off of the view.
Do you mean that when you add/edit the item, it still displays the foreign key column in the list view?
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

File.execute() not working for bat file

Dear all,
The purpose of my function copyToWinClipboard (text) is to get a string directly into the Windows Clipboard. The purpose is to allow the user of my project just to paste into the open-dialog of the application EndNote. I’m not certain whether the FM clipboard (supported by the copy/cut/paste methods for Doc) really fills into the Windows Clipboard also.
In the PhotoShop script forum I found the idea how to do this.
#target framemaker
// note the blank in the path
copyToWinClipboard ("E:\\_DDDprojects\\FM+EN escript\\FM-11-testfiles\\BibFM-collected.rtf");
function copyToWinClipboard (text) {
var theCmd, clipFile = new File(Folder.temp + "\\ClipBoardW.bat");
clipFile.open('w');
// theCmd = "echo \"" + text + "\" | clip"; // this doesn’t help either
theCmd = "echo " + text + " | clip";
clipFile.writeln (theCmd);
clipFile.close ();
clipFile.execute ();
Running this script provides a short flicker (the command prompt), but the clipboard does not contain the expected string. However, when double clicking on the generated I:\!_temp\ClipBoardW.bat the clipboard is filled correctly.
IMHO the execute method does not work correctly for bat files. In another area of my project-script i run an exe file with this method correctly.

Hi Klaus,
sorry for my late response.
execute definitely works witch batch-files
Here's a "batch" - example you can test.
There are two methods to prevent window from closing:
"|more" - kind of pagebreak
"pause"
var oTemp = app.UserSettingsDir + "\\tmp";
    var MyDosCommand = "ipconfig.exe /a|more";
    var MyPath = new Folder (oTemp);
    if (!oTemp.exists)
        var MyPath = new Folder (oTemp);
        var lFehler = MyPath.create();
    oTemp = oTemp + "\\" +"nw.bat";
    var MyFile = new File (oTemp);
         MyFile.open ('w');
           if (MyFile.error > "")
                alert("ERROR");
        MyFile.writeln(MyDosCommand);
        MyFile.writeln("pause");
        MyFile.close();
        MyFile.execute();

File Adapter: Advanced selection for source file

Hi Experts,
I am doing file(Idoc format) to IDoc scenario. In my scenario I am getting files in three different formats (ex: abc.dat, xyz.dat, 123.edi). My communication channel (sender file adapter) should poll for every 30 mins, picks up the files and map them to Idoc without any mapping.
Need following clarifications:
1. Should I create 3 communication channels to pick up 3 different type files? Or should I use the Advanced selection for source file to pick up them with only one CC?
2. If there is no mapping how should I proceed in this case?
Regards,
Rams

>>1. Should I create 3 communication channels to pick up 3 different type files? Or should I use the Advanced selection for source file to pick up them with only one CC?
Not required.. if all the files are from the same directory then u can specify . in the file name parameter.. but make sure that only these 3 file types are places in the directory... if this is not the case you can use Advannced Selection... check my Wiki [Single Sender File CC For Multiple Directories|https://wiki.sdn.sap.com/wiki/display/XI/SingleSenderFileCCForMultipleDirectories]
>>2. If there is no mapping how should I proceed in this case?
Mappiing is required only if the source and the target structure are different.. if u send the file with the IDocc XML format mapping is not required...
~SaNv....

Batch Rename with additional "."s, drops the file extension. Request for "Keep File Extension" option...

I NEVER name files with extra "." s in the name. I realize that all OS's (even Windows) will recognize it, but I haven't gotten out the old mindset of 8.3 filenaming... Although I do use longer names. So... I was surprised to see that when I was renaming files as per a clients naming preference to add a period within the name, the file extension is removed.
For example:
original file - 2014_10_31_1643.CR2 when batch renaming to "2014.31" + sequence, drops the "CR2" extension.
but.... if I change it to "2014_31" + sequence, the ".CR2" remains
Since adding multiple "." is a legitimate naming convention, shouldn't the file extension remain? Or, possibly this could be made more flexible by adding a check box "Keep file extension"
just a thought.

Refer to this stackexchange article:
http://apple.stackexchange.com/questions/47319/how-can-i-make-os-x-recognize-new -file-extensions
The finder will only select the filename only for "known" file types.

Performing a mass rename on originals to get rid of backslashes in file names. Worked for most files but failed for some with OSSStatus -43. Can't find any info on error -43. Any ideas?

I'm moving all my managed files to be referenced so I can access from both Aperture and lightroom. Needed to do a rename on 16,000 files to get rid of backslashes in the file names. Most of the time it worked but for 1093 files it gave OSSStatus -43. I've tried googling the error and got nothing. Any ideas where to begin looking?
Thanks
Jim

How are you renaming the files? In the "File > Relocate original file" dialog panel? Are you using a custom name format?
Have you checked in Aperture, if the originals, that are giving you the error message, are still inside the Aperture library?

How can we call a class file of one package for class file of another

How can we call a class file of one package from class file of another package and both packages exist in a same folder

How can we call a class file of one package from
class file of another package and both packages exist
in a same folder
Luckily they don't so it's really not a problem after all.

Default file type has changed for Illustrator CS5.1 - Please help!

I am using Illustrator CS5.1 and have just noticed that whenever I try to open a new document (file/New...) the document is a PDF instead of an AI file. How do I change it back to AI? - Not sure how it changed to PDF in the first place.

How exactly are you determining the file is a .pdf? What platform/OS version are you on? What file extension (letters after period) is on your files, what format does your save as show?
If your icon is a .pdf icon and clicking on the file later opens in Acrobat, then your file association is not assigned properly. On a Mac Command I on a selected file saved by illustrator, and change open with from acrobat to Illustrator, then click CHANGE ALL.
There are more possibilities to why this can happen, please answer the questions at the beggining of this post should you need more help.

Large file handling tips Help for illustrator file larger than 3 gb

Similar Messages

Maybe you are looking for