Large pages are not used when databases are started from srvctl on ibm aix
Hi,
RAC 11.2.0.3.2 on IBM AIX 6.1 TL07. Mixed databases 10.2.0.5.4 and 11.2.0.3.2
When started with SQLPLUS, the database instance use LARGE PAGES
When started with SRVCTL, the database instance doesn't use LARGE PAGES, even root has the right capabilities
lsuser -a capabilities root
root capabilities=CAP_NUMA_ATTACH,CAP_BYPASS_RAC_VMM,CAP_PROPAGATE
The same behaviour is observed for 10.2.0.5.4 and 11.2.0.3.2 databases.
ORACLE_SGA_PGSZ=16m is exported in /etc/profile.
I found that :
1) When the node is restarted (shutdown -r now), clusterware and all databases (database 10gr2, 11gr2 , asm, ...) start automaticaly WITHOUT using LARGE PAGES. After this, databases restarted with SQLPLUS are USING LARGE PAGES, and databases restarted with SRVCTL NEVER use LARGE PAGES.
2) When the clusterware is restarted manualy (crsctl stop|start crs) all databases (database 10gr2, 11gr2 , asm, ...) start automaticaly and all instances (10gr2 and 11gr2) are USING the LARGE PAGES. After this, database are ALWAYS using LARGE PAGES (started with SQLPLUS or SRVCTL)
So, this problem occurs only after a restart of the host. All is fine after a manual restart of the clusterware.
my references
SGA Not Pinned In The AIX Large Pages When Instance Is Started With Srvctl [ID T369424.1]
How to enable Large Page Feature on AIX-Based Systems [ID 372157.1]
Thank's for your help
The problem here is for IBM AIX (I dont find the equivalent for ulimit -l max locked memory, in ulimit for AIX)
Here a portion of the original /etc/ohasd script (ulimit -c and -n are already set for AIX)
start_stack()
# see init.ohasd.sbs for a full rationale
case $PLATFORM in
Linux)
# MEMLOCK limit is for Bug 9136459
ulimit -l unlimited
ulimit -c unlimited
ulimit -n 65536
ulimit -c unlimited
ulimit -n 65536
esac
So i put a trace
start_stack()
# see init.ohasd.sbs for a full rationale
case $PLATFORM in
Linux)
# MEMLOCK limit is for Bug 9136459
ulimit -l unlimited
ulimit -c unlimited
ulimit -n 65536
ulimit -c unlimited
ulimit -n 65536
echo "$(ulimit -a)" > /tmp/coh.log
echo "$(lsuser -a capabilities root)" >> /tmp/coh.log
esac
here is the result :
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 4194304
memory(kbytes) unlimited
coredump(blocks) unlimited
nofiles(descriptors) 65536
threads(per process) unlimited
processes(per user) unlimited
root capabilities=CAP_NUMA_ATTACH,CAP_BYPASS_RAC_VMM,CAP_PROPAGATE
i continue investigating this way ...
Similar Messages
-
I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
Can you help please?Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file
From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
http://www.thexlab.com/faqs/trash.html -
User pictures are not shown when users are added to person field in custom list
Hi,
Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
is working fine and as expected.
There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
Any suggestions would be very helpful for resolving this issue. Thanks in advance.
-Amol MesheWe are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
Michael Allen (.NET and SharePoint 2010 Developer) -
Some paragraph tags are not printing when document is printed from Framemaker 10.
So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws. -
I keep getting "cookies are not enabled" when they ARE on my Mac, so can't sign in to Facebook
I use Mac OS 10.5.7 and have for a very long time. I was using a slightly older version of Firefox although I update when prompted. Now I am using Firefox 3.6.13 Although working fine for a very long time w/ no problems, suddenly I cannot get signed into Facebook OR Netflix because I get an error message saying my "cookies are not enabled in browser". They ARE enabled, and I've repeatedly emptied the cache, rebooted, quit and restarted Firefox, changed passwords for Facebook. NOTHING gets me in.
If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled -
Loading new class files when they are not available when the JVM starts
Simple Question
Is it possible to load class if it was not compiled when the original JVM was launched?
More Detailed Question
Our build system is getting a slight tweak with a new test runner. After our build system compiles the file, I would like to be able to load the files that have just been compiled.
Our build system runs inside its own JVM and calls ant scripts to run the different processes(Separate JVM). The new test runner will also be called from the build system(Same JVM) but not as an ant target. Is it possible to call the newly compiled files from inside the build system JVM if they had not been created on the start of that JVM using reflection?
Thanks in Advanced!public class t
public static void main(String args[])
throws Exception
Writer out = new FileWriter("Foo.java");
out.write("public class Foo implements Runnable {\n");
out.write(" public void run() {\n");
out.write(" System.out.println(\"run like the wind\");\n");
out.write(" }\n");
out.write("}\n");
out.close();
Runtime.getRuntime().exec("javac Foo.java").waitFor();
((Runnable) Class.forName("Foo").newInstance()).run();
} -
System details: Windows 8.1, Firefox 34.0.5.
Until today, I have not used the Tab Groups function. Today I just used it in troubleshooting this issue.
I noticed that when I have lots of Firefox windows open, I can't see taskbar previews for all the open tabs. The taskbar previews only show the active tab for any specific Firefox window. After some investigation I found that if I have 20 or fewer tabs open (in one Firefox window or across multiple Firefox windows) I can see taskbar previews for all the tabs. More than 20 tabs and the taskbar previews change to show only the active tab for each Firefox window.
After a little more investigation I found that I can see more than 20 taskbar tab previews if I use the Tab Groups function. I don't need to actually organize my tabs into groups, just to invoke the Tab Group function in each window. Trouble is, the tab groups do not survive after closing Firefox. I think this is probably because of an extension I use called Session Manager. Since I am not ready to give up the extension, I wonder if I can change the taskbar preview behavior to show more than 20 tab previews in the taskbar without using the tab groups function.
Thanks in advance for any suggestions.I am not entirely sure, but this menu should change that preview in your OS:
Control Panel > Taskbar > Taskbar Properties > Jump Lists change the number from 10 to the number of tabs
If it doesn't please see Windows support for help. -
Contacts are not appearing when they are imported after wipe!!! HELP!
I have a Z1 running 4.4 and so far this is the most annoying bug ever!
This has happened after I tried to do a full wipe on SUS!
It seems that after I import my contacts from my sd card, everything is okay. However, I use an HD Contact app which often requires me to wipe my contacts list a few time just to refresh the photos.
When this wipe happens, my contacts do not anymore appear on my list even though the system says "Contacts added/imported"
My list remains blank except for the "Emergency Number" and "Myself" entries.
My god!
I have tried to run it on Safe Mode, hard restart, reboot, force stop the Contacts app yet nothing seems to work!
The only solution is a full wipe again and again.
This has never happened before the 4.4 update or when I tried to reinstall 4.4 via SUS.
Is anybody having the same dilemma? I could really use some helpHi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey. -
I've been delaying trying to solve this problem. I have a power mac g4 currently running 10.5.8. After installing this back in august of last year I have been unable to fully go on some sites because I get an error message that says my browser is not configured to accept cookies. Problem is both firefox and safari are enabled to accept cookies. Then when I try to log into yahoo mail the url is refreshing but yahoo mail site is not opening. Now, I have re-installed 10.5, I have reset safari, emptied the cache, deleted cookies and nothing has worked. My computer doesn't have a virus and I'm at my wits end trying to figure this out. I never had these issues prior to installing the new system. I appreciate any help with this problem.
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Leopard.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?viewlocale=en_US
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html -
Skype emoticons are not showing when they are ight...
Just like the subject says when i try to put a emoticon and not leave at least one space between the emoticon and the text it won't show the emoticon, it will only show the shortcode like: " (kiss)hey" and not the actual emoticon. If i leave space between them the emoticon will show up like usual. If anyone can help me to solve this i will be very thankfull.
Unfortunately, this is how it behaves now on the latest Skype versions (at least on 7.1 and 7.2). With the older Skype 6.21 it was possible to send emoticons and text without separating them by a blank space.
-
All applications are not responding when wake from sleep.
All applications are not responding when Macbook pro wake from sleep,
the keyboard and touch pad are okay.
Why?
Thanks a lot.I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
If it does not, that means one of those services that was disabled, is causing the issue.
If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware.
Here are the steps to disable non-critical services:
Windows + Q to bring up Search
Type 'msconfig' and press Enter
Click the Services Tab
Check the Hide All Microsoft Services box
Click the Disable All button
Click Apply and Restart
Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
Let me know the results when you get a chance, please -
Inherit metadata not working when content is moved from one folder to another
Hi All,
I have a unique situation for which i would like to know if there is any solution.
We have WebCenter Content 11.1.1.8.0 installed with Framework folders, Accounts and RoleEntityACL (Access Control List-ACL) enabled.
We are not using Accounts, but are using ACL since we want the end users to be able to modify the content access permissions.
Now as per documentation - Managing Content Repositories section 11.2.3.2.1 What You Should Know About Item Level Security
The following occurs in Oracle Content Server on setting custom permissions for a file or folder from the Item Level Security dialog:
The account is changed to account WCILS/original_account.
All users are by default granted RWDA on account WCILS. Changing the account to WCILS/original_account ensures that only the custom permissions determine the security on the content.
The ACL content metadata fields, xClbraUserList and xClbraRoleList are updated with the custom permissions.
The content metadata field, xInhibitUpdate is set to true, to prevent ILS from overwriting an item's own custom security with a parent folder's custom permissions.
Now when i am copying or moving any item from one folder to another folder, it does not inherits the Roles Access Control Lists, User Access Lists of the destination folder in which i am copy the content. It does not inherit the other metadata values like comments and a few more custom metadata value.
I understand that this is due to the xInhibitUpdate metadata field, mentioned above.
Is there any way to override the xIhibitUpdate metadata field and set it to false?
Does anyone know what event is fired when we perform the copy or move of a content item?
Thank in advance
AmitAny response will be helpful
-
Cursors are not closed when using Ref Cursor Query in a report ORA-01000
Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AMThank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
v_from_date DATE;
v_to_date DATE;
V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
IF :no_date=1 then
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY VOCH_NO;
END IF;
ELSE
v_from_date:=to_DATE(:from_date);
v_to_date:=to_DATE(:to_date);
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,VOCH_NO;
END IF;
END IF;
return temp_JOURHEAD;
end; -
all of sudden comcast and facebook pages do not load when i try to access them on my mac. all other websites are fine. any one out there having the same issue?
That's just not right - I mean, it really wrong to have to use a Windows machine to access your Facebook account. Can you pull up Comcast on IE as well?
Something's going on and I'm surprised that deleting your cache and cookies for those sites didn't work.
Let me fool around a bit - what's your primary browser?
Curious,
Clinton
Maybe you are looking for
-
safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success
-
iOS Ver: 5.1.1 Model: MC497LL As advised in many forum thread, I had it set to factory default and without any content or app, it's still crashing. I am feeling frustrated. Should I downgrade it from 5.1.1 to original iOS? I don't care if I don't get
-
Hello, I have a problem with several systems on my corporate network where a service is taking up an entire thread of a processor and more than 1GB of RAM. You can probably guess the culprit; svchost(netsvcs) I have run Process Explorer but all Proce
-
Add vendor name in MMBE transaction
Hi all, In transaction MMBE, (Stock overview), I had a requirement where I need to display the storage location wise material movement. When I select the vendor in Display Variants, it is displaying the vendor number. But instead of vendor n
-
Problem in DB13 - standalone gateway installed - error due to env
Hello, As we have db and ci on separate server and there was no gateway on db server, I installed standalone gateway the rfc connection started working fine. When I try to execute any BR* command through DB13, it gives error. I checked using SM69 the