Large Pictures in Mail Drop Turn Into Small Thumbnails (Exchange Server)

When using Mail Drop through Mac Mail, large pictures (>20MB total) are converted to thumbnails with no link to the original file.  This happens when I choose to use Mail Drop for the attachments.
The large picture also shows in my sent email as a thumbnail with no link.
If I go to my iDevices, I see that I am given the option to download the original large file(s) and it works.  But not on my Mac using the native Mail App.
If I send a large video it does work properly.
Thanks!

I'm running Entourage 2008, and after successfully connecting to the exchange mail server, it will occasionally simply drop the connection (reads: not connected). Once this happens, even restarting Entourage doesn't ask me to log-in again until the mysterious issue resolves itself. Sometimes only a few minutes, but it can occasionally last an hour or two!
Did you ever get an answer to this? My wife's office is experiencing the same (or similar) problem that Entourage disconnects from the Exchange server, with no error, no message, and mail just sits in the outbox, waiting to go out. Would love to see if anyone has suggestions.
Someone pointed me to http://support.microsoft.com/kb/947699, but I don't think that's it. (That suggests that if you send mail, it will fix it. But mail just sits in the outbox.) I was wondering if this might be the problem: http://support.microsoft.com/kb/329067/en-us
Don't know. Thoughts?

Similar Messages

  • Get Mail to Stop Downloading Junk from Exchange Server

    Our company uses Comcast Business Class for email service. They in turn are running Exchange 2007 servers.
    I recently had to reconfigure all my email accounts do to a corrupt Mail plist. Upon doing so, I found out about Mail 4.2's (Snow Leopard edition) ability to auto discover Exchange server configurations. Pretty nifty. With one caveat. Apple Mail is downloading all the Junk mail that winds up on the Exchange server. Which is quite a bit.
    Originally, before the corrupt plist problem, my Mail 4.2 was upgraded from Leopard and the account information transferred using the non-auto discovery method, if you will. When it was setup that way, there were only about two or three Junk messages that breached the barrier per day. Now I'm getting dozens.
    On to my question: is there a way to configure Mail to stop downloading Junk mail from an Exchange server and just leave the Junk on the Exchange server?

    Thanks, William.
    They are, fortunately, being filtered into my Junk folder in Mail. There is the occasional culprit who sneaks through to my Inbox, but most wind up where they should. It's just the increase in volume to that Junk folder that has me concerned.
    Additionally, if a non-Junk message gets erroneously tagged, I no longer have the option I once had to set the message as "This is not Junk". That used to appear as a graphic and button at the top of the message. It seems like I no longer have that capability.

  • Mail flow completely broken after upgrading Exchange Server 2013 CU3 (Build 775.38) to Exchange Server 2013 SP1 (Build 847.32)

    internal mail flow completely broken.
    external mail flow completely broken.
    i upgraded exchange server as follows:
    1. setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    2. setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
    3. upgraded the exchange server with GUI installer
    also considered this: http://support.microsoft.com/kb/2938053/en-us
    receive connectors :
    Transport Service couldn't start, then i disabled hub transports, and it starts, but no mail flow on port 25. according to this:
    http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
    i didn't have any success to fix mail flow, any solution?

    Hi Alireza
    The above tech-net http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
    will be applicable only if we get these events in the app log 1019,1018,1036,4999
    You can check the transport service is running in which service account - Local or network 
    It should be running in network account by default.
    You can run get-transportagent and check if there are any transport agents installed 
    If you find them then disable all the transport agents that you have installed on the Exchange servers by running disable-transportagents
    Disable the antivirus if you have any installed.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • Processing large xml file (500mb)? break into small part? load into jtree

    hi,
    i'm doing an assignment to processing large xml file (500mb) and
    load into jree using JAVA.
    can someone advice me on the algorithm to do this?
    how can i load a 500mb xml in a jtree without system hang?
    how to i break my file and do the loading?

    1 Is the file schema based binary XML.
    2. The limits are dependant on storage model and chacater set.
    3. For all NON-XML content the current limit is 4GBytes (Where that is bytes not characters). So for Character content in an AL32UTF8 database the limit is 2GB
    4. For XML Content stored as CLOB the limit is the same as for character data (2GB/4GB) dependant on database character set.
    5. For SB Based XML content stored in Object Relatioanl storage the limit is determined by the complexity and structures defiend in the XML Schema

  • Move New Mail, Sent Iteam, Calender ETC from Exchange Server to PST Automatically in OUTLOOK 365

    I have recently upgraded from office 2003 to new 365 office.  In outlook 2003 all the iteams of exchange server in Outlook was automatically moving to my default PST. But in new outlook it is not moving automatically to PST. 
    Now creating rule is one option for INBOX new mail but what about new calenter meeting and sent iteams ? 
    Why microsoft has removed this facilty ? what is best way to do that ? Echange server had limited capacity and it is slower comparared to using PST directly. 
    Please advice. 

    Hi,
    The option to delivery Exchange emails to pst file has been removed in Outlook 2013. This is because corporations allow for larger Exchange mailboxes, and we can also use online archive or AutoArchive to offload the Exchange mailbox to a pst-file.
    However, if you still want to do this for sent items, we can create the following rule to achieve the goal:
    1. Click Home tab > Rules > Manage Rules & Alerts.
    2. Click New Rule button.
    3. Select Apply rule on messages I send, and click Next.
    4. Tick the through the specified account check box.
    5. Click on specified to select your Exchange account.
    6. Tick the check box "move a copy to the specified folder". 
    7. click on specified to select a folder in a pst-file.
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Mail on iMac not accessing MS Exchange server but both iPhone and iPad access the same account with no problems.

    I have been using an iPhone and iPad to access my work emails via our MS Exchange server for a number of years now with no problems at all.  I recently replaced my home PC with an iMac (first Mac I have owned) but cannot get it to communicate with the exchange server.  I've checked and re-checked the information on the iMac and my iPad - I even deleted the mail account on the iPad and input the details concurrently with setting up on the iMac - but the Mac will not access the exchange server.
    I receive the message "The Exchange server "---------------" rejected the password for user "------"  Enter you password again or cancel."  I am using the correct password.  iPad and iPhone are logging on using that password fine.  iMac just ends up repeating this message.
    Our IT support at work assure me that there is no reason from their end for it not to work, and reasonably point to it working using the iPhone etc.
    I'd be extremely grateful if anyone can provide a solution to this basic, but extremely frustrating, little problem.

    iPhone and iPad use a different way of accessing the server.
    I don't know the exact details, but we are using Zarafa instead of Exchange and have the same problem:
    iPhone and the likes can connect to Zarafas z-push interface, which is some identical interface to the native Exchange interface, while the desktop e-mail application tries to interface with the web front end (via http) of the server.
    These are completely different setups and it depends on the actual installation of the server to get this going.
    So, you will most likely need different access parameters for the desktop - and the web mail feature has to be enabled on the Exchange server.
    In my opinion using the web mail interface is just silly. On the other hand, the native protocol has less features comparedto the web front end, so you are somehow stuck with sins of the past.
    Good luck!

  • Contact Pictures in Address Book Vanish When dragged to Exchange Server ???

    Forgive me in advance if this has been solved and then please direct me to the right link - however this problem is really becoming a deal breaker for me because so much of my intranet software pulls from contact images
    I have a brand new Macbook Pro clean installation and after setting it up I linked it to my 07 Exchange server and pulled down my contacts it worked flawlessly and i thought all was well - Every field including the notes section and pictures transferred.
    Then when I edited pictures in address book contacts under the on my mac section and copied them to my exchange address book the contact transfers but the picture is missing - after the initial transfer of contacts from my exchange server it happens vice versa also if i take a contact on my exchange server with a picture and drag it to address book (in the address book application) it deletes the picture
    Alot of my applications pull from my exchange contact database and I rely heavily when replying to calls or messages at looking at the picture when it pops up on my screen
    Apple support said they are sort of aware of this issue and there is a work around but they dont know what it is ??? and recommended that i ask on the forum
    Any help on this issue would be greatly appreciated Im at my wits end or does address book just not work right ? - Oh and one more thing when clicking on a contact on the exchange server from address book i can edit a contact but i cant edit the picture field either
    Someone tell me something'
    Thanks

    I'm having the exact same problem... worked fine until I did a clean install Last week.
    anyone figured out a fix or workaround ?

  • Can someone help with my Mail not working with my Microsoft Exchange server?

    I am trying to set up my Mail account. I am using the Microsoft Exchange server. I've been using Entourage, but wanted to switch to using the Mac's Mail. I used the same settings I had with Entourage, but with Mac Mail I'm getting this error: MFEWSErrorDomain error 56. From some of the other posts I saw, it seems as though no one has any answers, but I figured I'd ask anyway.

    There is no single cause of this problem and hence no single solution. There are several suggestions in this thread, if you haven't come across it, one of which might help:
    https://discussions.apple.com/thread/3953623?start=0&tstart=0
    Regards.

  • Mail refuses to connect to my Exchange Server

    I have an Exchange Server which also functions as an IMAP server. I cannot get mail to connect this server using the IMAP protocol. Thunderbird on the same machine connects to this exchange server just fine using IMAP. And Mail does not have problem connecting to other IMAP servers. Any idea on where I can look to troubleshoot?

    I'm in the same boat and have been banging my head against this all day. Have you found an answer yet?

  • Does Mail (3.6) work with MS Exchange Server 2003?

    I'm struggling to get Mail to work with an exchange server.
    Apparently, from the company's FAQs, we can hook up an iPhone, but alas not Mail.
    With the iPhone directions, they talk about a "domain" field, which doesn't show up in Mail.
    Any tips or clues would be appreciated.

    I'm not entirely sure why this works now, but it does. Yay!
    My problem evolved such that I, when I sent out through a different outgoing server, a recipient would see the address of the outgoing address, e.g. if I was using the gmail servers it would look like [email protected], and not the [email protected]
    So as a work around I tested sending out messages with my [email protected] address in the Reply To field. That works.
    Strangely, a Sent mailbox with for my [email protected] has appeared. Even messages that I've sent out with nothing in the Reply To field indicate that they've come from my [email protected] address.
    Keys to making it work:
    • Set up the exchange address as an IMAP account (not an exchange account)
    • Use the above referenced source forge tool
    • Partner with the company's IT people for whatever assistance they can offer
    • Use a Reply To field with the exchange, if required

  • Mail.app suddenly lost connection to exchange server

    Hello
    I have 3 (at least) different mail.app accounts (on different macs) that have lost the connection to our exchange server and is not able to reconnect to it..
    We can access the mails from webmail or from Entourage.
    At first we thought that it was the latest update to mail.app but we have found others on the internet with the same problem (before the update). Sadly they have not provided us with the sollution to the problem.
    I plan to re-boot the exchange server on sunday and will update the post with the result.
    But if anybody have had the same problem and found a solution, then I would very much like to hear about it.

    I'm having the exact same issue. However, since I'm not in the IT department I cannot reboot our Exchange server. Were you able to find a solution?

  • Why I can't see my pictures when I drop them into time line ?

    Please help. I drop pictures into time line in iMovie 10 and they don't apear in the window I can't play them. where as video can be played. but when I move cursor over the pictures only green screen apears. Why ????

    You don't have an iMac PPC.  PPC is for machines that predate 2006.  I've requested a moderator move this thread to the iMovie forum.  It might not be until Monday that they do.

  • Suddenly some of the characters in mail have turned into 'A's with boxes around them?

    I don't think I changed any settings, but suddenly some of the characters in my emails received have utrned into 'A's with boxes around them. A think the characters that have changed are in italics (see pic below).
    Any suggestions what has gone wrong here and how I can fix it?
    Thanks!

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
    Mac 101: Font Book
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case only, after running Font Book, launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo atsutil databases -remove
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

  • Can a large Abobe File be broken down into smaller sections with Reader?

    Is it possible to break an 18 page Abobe document into 2 parts?

    Not with Reader no. Quite Easy with Adobe Acrobat.

  • Firefox turns into small window when drag it or minimized

    It was working perfectly and now when I want to drag it the browser becomes a very small window. The same happens if I click minimize or the other "medium size " command whatever t'call.
    Tried restarting, closing and reopening and nothign has changed.

    It's a problem with Windows 8 if you are using any pre-release version or try to reset Firefox!
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for

  • Battery life halved after hard drive and ram upgrade

    I upgraded my hard drive to a wd 1 tb scorpion blue and upgraded the ram to 8gb. Now the battery life is less than halved. The speed has not improved or decreased , I'm happy with the drive performance, but am considering going back to the standard 4

  • Marker update for Inventory data sources

    Hi all, why we use marker update in Cube manage for inventory data sources at the time of loading? i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/ please clear my doubt thx

  • What can dreamweaver really do?

    Sites like facebook and google ect. are made with javascript and most likely notepad. Is dreamweaver the way to go if you want to build a site up to that level. (i am working with a few people). We would like to know if this is really the best progra

  • How to create closed captioning in premiere

    We have a series of short educational videos, and we need to add closed captioning subtitles.  Every set instructions says we need to import a .scc or .mcc file, but where do we create the file?  How do we create the file?

  • Doesn't Create Production Order without BOM & Routing

    Hello, I have a requirement that Production Order is not be created without the BOM Is there any Customizing Setting?? I have the option by implementing User Exit but i want to know is there any standard setting??? Please throw some comments??? Regar