Last Data Update Info field not showing in Web Template

Last Data Update Info field does not show up in the Web Template. This Web Template is for a MultiProvider on top a single cube.
Greatly appreciate if anyone has any insight into this issue.

Hi Suma,
if other queries work fine using exactly the same (customized) template the problem is most likely not the template. Does the appropriate query does display figures? Is your data binding done correctly within the template?
What happens if you execute the customized template which does not display Last Data Update Info field with another (i.e. a different) query? Does it display the Last Data field? What happens the other way round: you execute a different template with the appropriate query (which does not display Last Data Update). Does it show the Last Data Update?
Just give it a try, this sometimes help
Brgds,
Marcel

Similar Messages

  • BO Advance analysis 1.1.4,  Info Field like Last Data Update Table

    Hi Experts,
    I am using BO Advance analysis 1.1.4 for reporting output. There we have option to show Info Field like Last Data Update.
    It is using this function to get that info :
    =SAPGetSourceInfo("DS_1", "LastDataUpdate")
    Anybody have idea what BW table it is refering to get that info.
    As per my understanding, since these workbook of Adv. Analysis are refering Query which are built on MultiProviders, it go and find out the last cube/dso successful data load.
    Also I manually checked the date and time of last successful update in cube, but it is not matching as far as time is concern. Date is matching.
    Please help me to get the correct table which gave that info (date and time).
    Thank-You.
    Regards,
    Vinod

    Hi Tammy,
    I was trying for the similar requirement to get the "Last refreshed time" of the table used in the calculation  view  in HANA.
    It uses the same formula : =SAPGetInfoLabel("LastDataUpdate")
    But since Analytic View actually doesn't store any data, it is virtual. The date am seeing is the last changed date. i.e if i do any changes on the model, am seeing the last date when I changed it.
    Is there any function which we can use to get the Last refreshed date of the table in the model am using?
    Regards,
    Krishna Tangudu

  • Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

    Hello all,
    We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
    The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
    The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
    Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
    Thanks in advance,

    Hi Kiran,
    Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
    Try to create one record in remote data source  and load it again. It may be find the latest status.
    Thanks,
    Chandra

  • How to hide the Last date Update in the Excution of a report

    Dear All,
    When we execute a query in EP, the Out Result will contain the following Options
    1) Save As
    2) Open
    3) Export Excel
    4) Information
    5 ) Comments
    6) Filters
    7) Settings
    8) Last data update
    Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
    hope everything is crear.
    Please give me the hint atleast

    You also have to test the value:
    REPORT ztest MESSAGE-ID 00.
    DATA: BEGIN OF itab OCCURS 0,
            f1 TYPE i,
            f2 TYPE i,
            f3 TYPE i,
            f4 TYPE i,
          END OF itab.
    DATA: sel_field(20),
          value TYPE i.
    DO 5 TIMES.
      itab-f1 = sy-index.
      itab-f2 = sy-index + 10.
      itab-f3 = sy-index + 20.
      itab-f4 = sy-index + 30.
      APPEND itab.
    ENDDO.
    LOOP AT itab.
      WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
      HIDE itab.
      CLEAR itab.
    ENDLOOP.
    AT LINE-SELECTION.
      CLEAR: sel_field,
             value.
      GET CURSOR FIELD sel_field.
      IF sy-subrc = 0.
        CASE sel_field.
          WHEN 'ITAB-F1'.
            value = itab-f1.
          WHEN 'ITAB-F2'.
            value = itab-f2.
          WHEN 'ITAB-F3'.
            value = itab-f3.
          WHEN 'ITAB-F4'.
            value = itab-f4.
        ENDCASE.
        MESSAGE s001 WITH 'Value of' sel_field 'is' value.
      ELSE.
        MESSAGE s001 WITH 'Invalid field selected'.
      ENDIF.
    Rob

  • TS3991 Updates on Mac not showing up in iCloud

    Updates on Mac not showing up in iCloud, yet when I move document to icloud, it says it already exisit. new document not going to iCloud, exisitign docuemnts on iCloud not being updated.
    Spent the last hour trying alll the suggested tips on apple support...

    Use the Find my iPhone icon. There is no separate Find my a Mac icon. All devices show up under Find my iPhone.

  • Last Data Update in Visual Composer and Web App Designer

    Hello,
    We want to show the last data update in query result and we used 2
    differents ways to do it: throught Web Application Designer (SP 12) and
    Visual Composer (SP 10).
    In query result of Web Application Designer, the last data update came
    in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
    This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
    Why does the difference exist between: Web App Designer and Visual Composer for last data update?
    So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
    Best Regards,
    Pablo Moraes

    Hi Mario,
    Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
    Regards,
    Pablo Moraes

  • BB Z10 BBM Group updates and notifications not showing up in Hub?

    BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58. 
    Any workaround? 

    vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After doing last Mavericks update, Messages is not working properly

    Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.

    Hi,
    Check System Preferences > Notification is set for Messages
    In Messages > Preferences > General Section change the Sound option for Message Received.
    Restart the app and test this sound is (still) playing.
    Place app in background an iMessages "yourself" form your iPhone.
    Does the sound Play ?
    10:18 pm      Wednesday; November 13, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • On which object the "Last data update" is calculated when a query is built

    Can anybody tell me that the information "Last Data Update" (in a  query output) comes from which object ? I want to know the technical details .
    I know that if a query is built on a Multiprovider, then the "Last Data Update" will show the least loaded request date among the Infoproviders. But I want to know which object keeps this information.

    Hi Papiya,
    I think it is related to text elements SYUSEIT and also to 0REQID.
    -Pradnya

  • HT4623 How can I update ios if "software update" option is not showing on the page "General"?  On my Iphone, it only show "About" and "Usage" next to each other.

    How can I update iOS 4.2.1 to the latest iOS if "software update" option is not showing on the page "General"? On my Iphone, it only show "About" and "Usage" . Please help.

    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Why is my data on my iPhone not showing up in iCloud?

    Why is my data on my iPhone not showing up in iCloud?

    Its a software problem, I just need the right script to run in Terminal to reset it .
    I tried SMC update 1.7 but it told me its incompatible with my Macbook Pro 17in dunno
    why as I have a 2011 machine

  • Text Fields Not Showing in Design or Live View

    Hello Everyone,
    I have run into a problem trying to create a simple contact form through Dreamweaver CS6.  I have two text fields for Name & Email, and 1 text area for Comments.  The issue I am running into is that the text fields are not showing in Design or Live view.  I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing...  I tried uploading my contact page with the same result of no text fields showing...
    What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine.  I am thinking that I am missing something, but just do not know what exactly.  The form is styled through CSS.
    Here is the form code:
         <div id="CRDForm">
           <form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
        <input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
        <input type="hidden" name="recipients" value="[email protected]" />
        <input type="hidden" name="subject" value="Contact Form" />
             <label><p>Your Full Name
               <input name="Name" type="text" id="Name" size="40" /></p>
             </label>
             <label><p>Email
             <input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
             </label>
             <label>Comments<br />
             <textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
             </label>
             <input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
           </form>
        </div>
    Are there other variables I should be thinking about in the rest of my site?  I am using a fluid grid layout.  I have CSS for desktop, tablet, and phone devices.  I also have a primary CSS file that imports all three.  The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags. 
    Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6?  Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3.  I did not uninstall that before installing the newer version.  I assumed (and I could be wrong here) that it would automatically replace the older version.
    I apoligize for it being long winded, but I am looking for some help on this issue...
    Thank You

    Hey thank you osgood for the reply!
    When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
    Ya I found what was blocking my text fields in my desktop.css
    I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
    Thanks again!

  • Last data update

    Hi,
    How I can find the last data update information(date and time) of multiprovider in BW?
    Kindly help on this.
    Regards
    Mukul Singhal

    Let me explain how the "last data update" works.
    If the query is based on one cube or DSO, it is the time of the last request upload.
    If the query is based on a multiprovider, like the example given ealier,
    assume there are three cubes in multiprovider : 
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Last udpate of cube3 is 11/20/2008.
    The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
    Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
    Now we assume there are three cubes like this in multiprovider :
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Cube3 is empty. It has never been loaded with any request.
    Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
    Regards,
    Patricia

  • Applications Info Is Not Showing Up in the System Profiler

    My applications info is not showing up in the new system profiler. I get the message "no information found". Any help would be appreciated.

    I'd get them to send you another card.  If it works, great!  If not, then the connection on the computer is bad.  If that's the case, you can get a wireless PCI card or a wireless USB adapter, but the PCI card would be better.  Test it with another Airport card first though.

  • SSIS Data flow item does not show on the Tools Choose Tools Item

    I would like to add share point to my data source for my SSIS project.
    After I installed Share Point Source and Destination list, I went to Tools Choose Tools Item, but SSIS Data Flow tab does not show. I went to SSIS Tools box, but the components are not there.
    I would like to know are there any way to add Share Point Data source using SSIS.
    Your help and information is great appreciated,
    I use SQL Server 2012 and VS 2010.
    Regards,
    Souris,

    Hi Souris,
    I have installed the SharePointListAdaptersSetup-Beta-2012-01-28.msi in my SQL Server 2012 test environment, the SharePoint List Source and Destination adapters is listed in the Common type items of the SSIS Toolbox. To narrow down the root cause, please
    try the following steps:
    Make sure the SharePointListAdapters.dll exists in the C:\Program Files (x86)\Microsoft SQL Server\110\DTS\PipelineComponents folder.
    Make sure it is installed to GAC successfully, the SharePointListAdapters.dll should exist in C:\Windows\Microsoft.NET\assembly\GAC_MSIL\SharePointListAdapters\v4.0_1.2012.0.0__f4b3011e1ece9d47 folder.
    Refresh the Toolbox and check the Common type items.
    Since the SharePoint List Adapter is a third-party component, I would suggest you ask a question in its dedicated discussion plate:
    http://sqlsrvintegrationsrv.codeplex.com/discussions
    Regards,
    Mike Yin
    TechNet Community Support

Maybe you are looking for