Latest iTouch OS update problems

After installing the latest OS to my iTouch, not all of my songs will play or it will stop playing until I power it off and back on again??

See if this previous discussion hels:
Problems with IOS 5 Music App (Updated)

Similar Messages

Latest ipad os update problem

I cannot see play videos from my ipad to the TV through apple TV after downloading the latest ipad os. Any ideas?

Bring up Control Center by swiping upward starting at the very bottom of the home screen, just above the home button. Do this while looking at the home screen.
Does the icon (AirPlay icon) appear there? It should.

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

Has ayone experienced any problems withe latest apple tv update

who has experienced problems withe latest apple tv update???

Welcome to the Apple community.
There are always a few that experience some problem or other after an update. Exactly what problems are you having please.

I have just created a new playlist, at the same time I have updated the ITunes software and that of my ITouch. My problem is that today I have been trying to edit the playlist and the edit playlist is greyed out please help

I have just created a new playlist, at the same time I have updated the ITunes software and that of my ITouch. My problem is that today I have been trying to edit the playlist and the edit playlist is greyed out please help.
I have been in preferences and checked manually edit etc and still no joy. I must be missing something.
Susan

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

TS3694 im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to r

im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?

Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

Apple TV2 Just Disappeared from Remote app on iPad and iPhone after latest Remote app update

I Have used Remote app on my iPad and iPhones to control my ATV1, ATV2, and ATV3 for years. After the latest Remote app update ATV2 has disappeared from tRemote, and I can no longer find a way to connect it. Any advice about this?

Brilliant. Restarting did the job, and all is well. Since I have recommended this to others with other ATV problems, I'm a bit embarrassed that I didn't try it myself at the outset, and would probably have come around to trying it later, but you saved me some time. Thanks.

Nokia C5 -03 update problem

Hi guys,
I've bought this Nokia C5-03 recently and it was working fine till i had updated it,
but from the time i had updated the software,its become slow and seems to hang up now and
then, the new update totally slowed down my phone, i've tried reinstalling the software but
nothing seems to work, is there any possible way that i can rollback to the earlier version
software!!!!! OR any other solutions !!!!!

here is an new problem guys which i'm facing with the existing one, i have an Nokia BH-505 headset and when i'm playing the music files the sound track which i'm playing keeps breaking for a while and then ends up in freezing and restart of my phone, why is this happening!!! I've done an complete format of my memory card and hard resetted my phone , and updated the latest firmware, and my problems are still the same , ANY HELP !!!!!! PLZ !!!!!!!!!!!!!!

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

Camera raw won't open my raw files from bridge. Mac user, camera, Nikon D800, latest camera raw update is installed. Help!!

I don't get a photo preview in bridge of my raw files, just the NEF file thing. Then when I click to open them I get a message that says: "If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates" "If the problem persists, visit the following link for more information: http://www.adobe.com/go/kb407111". I can't seem to figure out what to do! Help Please!?

Usually the problem with a newer Nikon camera is that the NEF files have been transferred or viewed with obsolete Nikon software, like Nikon Transfer for View NX, and those change something in the header of the raw file that makes it unrecognizable to Adobe products.
For new images, the solution is to either stop using Nikon products to transfer and view your files or update your Nikon products to be as new as your camera.
There is a utility to fix this particular corruption here:
Fix Corrupted Nikon NEF Images

IPhone update problems!

As alot of people, I have encountered the problem of NOT being able to sync my phone with my G5 ever since the latest iPhone & iTunes updates. The phone lights up and indicates it is plugged in, but it will only appear in iPhoto, and not iTunes. The same issue with plugging it into the wall adapter... The phone lights up and indicates it is plugged in, but nothing.
The geniuses at tech support have decided to offer this solution: Update your USB Hardware to USB 2.0. Are you f*ing kidding me!!!!

Try a forced restore. Reboot your computer, start iTunes, connect the iPhone to the computer. Wait. If you get an error, or nothing happens for several minutes hold the sleep/wake and home buttons for a long time (~20 seconds) until you get a message on the screen that it is restoring.
If all of these fail take it to your Apple store.
this should solve your problem

Latest Acrobat X Update Killed Com1

The latest Acrobat X update killed my Com1 port. Yes, I still use Com1 to communicate with my ham radio. So if any Adobe guy is reading the discussions in this form, please fix this bug. BTW, why do I have to call tech support, why can't I send you guys an e-mail.
. . . JohnB

To correct the port problem of Adobe PDF Printer after the application of A10.0.1 patch kindly follow the below steps (they require Admin privileges):
1.      Go to Devices and Printers.
2.      Right Click on the Adobe PDF printer and click on Remove Device (Win 7). This will delete the Adobe PDF printer.
3.      Go to Programs and Features (Win 7)
4.      Select Adobe Acrobat X Pro or Standard and click on Change
5.      Select Repair and follow instructions to complete repair
6.      After the repair is done you will have correct settings of Adobe PDF printer and also Adobe Acrobat version 10.0.1.

Bug in Latest Mavericks Security Update???

I just installed the very latest Mavericks Security Update as instructed. It was about 500+ MB and took 20 or so minutes to upload and then required a restart to complete installation, which was done. After restart you are asked if you wanted to login to iCloud, etc. the MacBook worked just fine. I shut down normally.
Several hours later upon boot up I first got a "security" warning about only using Apple software. It asks for acknowledgement = ok.
After rebooting the Apple logo shows as normal and the circular progress wheel spins but it never gets to login screen.
What is going on Apple???
Any suggestion fellow Mac users????

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Since latest Firefox automatic update, any downloaded jpg is saved as a firefox file and I cannot save as a jpg. Why?? Help please!!

Since the latest FF automatic update - any jpg I send to myself I cannot save as a jpg. This is so frustrating. I use my camera phone to take shots of our library activities and then to make newsletters, website updates etc. Just started this week. Today is the first day I noticed this problem.
== This happened ==
Every time Firefox opened
== Today 7/28/10

You can rename the files and give them a .jpg file extension.
You can force that while saving the file if you add quotes around the name: "image.jpg"
Help > Troubleshooting Information > Profile Directory > Open Containing folder
See also [[Using the Troubleshooting Information page]]
See also "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Latest iTouch OS update problems

Similar Messages

Maybe you are looking for