Latest WAD Update Problems!

Hi, I updated my BI Addin to the latest patch and now I'm having serious problems. Saving a Web Template doesn't work and give me the following message:
<a href="http://i15.tinypic.com/53h4y84.jpg">Image for Template Save Error</a>
Also, after a save I close the window and get the following message:
<a href="http://i17.tinypic.com/4qqdoyh.jpg">Image for Window Close</a>
Is there a way for me to find a fix for this problem. How can I delete my sap gui install and bi addins and reload all?

Was due to application of OSS Note suggested by SAP. 1067859. This note causes a local pc file to be removed upon refreshing metadata with WAD.

Similar Messages

MacBook Pro & Latest Airport Update Problem

Hi, I just ran the software update and installed the latest Airport update - AirPort Extreme Update 2008-001 for Tiger , and it's conflicting with my system, giving me CPU spikes...everything was fine before I installed the latest update. Is there a way I can go back to what was previously there? How do I install the older Airport files?

If you don't have a backup you can restore, then the only way to revert to your previous system is the following:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Latest iTunes update problems with repeated error messages every 65 seconds??

After this mornings' update of iTunes. Problems with Applemobiledeviceservices.exe. Error message every 65 seconds - software exception (oxc06d007e) occurred in the application at location 0x7c812fd3.
How do I stop this?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

W500 v5700 Latest graphic update problem

Hi,
i have been running my game on v5700 without any graphic problem which led me to discomfort.
But after recent graphic card update from lenovo system updates, when i run my games, at the bottom left corner it will have some blue strip or blue&white strip appearing. Sometimes it blinks continuously, sometimes it will just stay there.
I've tried to screen shot the scene, and wanted to post it here. Sad thing is that the blue strips doesnt appear on the screen shot.
i wanted to asked if anyone have the same problem here? Is it my screen problem?
Is there any other solution rather than reverse back to the older version graphic driver or wait for another update to release?
PS : I run Warcraft 3 (DOTA) & Age of empire 2 conquer expansion

Hi @Sam86 ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that you tried to download and install a driver for your graphics card but received this error, " driver being installed is not validated to this computer"
All the recommended driver for your notebook will listed on the HP website.
Downloading or Updating Software and Drivers for HP Computers.
HP ENVY 14-k133tx Sleekbook Drivers
Any other driver has not been tested and performance is unknown.
Have you tried adjusting the resolution on the display to improve the quality? Display Quality Issues.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Latest mandatory update problems

I just completed the mandatory update and it is not useful at all. The little house button on the bottom of the screen is no longer active. The locking screen security does not acitvate when you hit the button on top of the phone. You no longer have quick access to the camera by holding down the side button. There is also a new permanent on screen button that has the phone attached and since the screen doesn't lock it activates&dials. How can undo this update?

I am doing the same thing every time i pick up my phone ( 4th HTC Droid Incredible)
I have had tethering since the first one!
Tethering being hooked up to a charger at home 70% of the time so it will make it through an 8 hour shift!
Time on today 2h 49m 44s
Time without a signal 43%!
( I use a verizon mobile work phone at a place that has our own repeaters and use the Incredible only on breaks or lunch - usually messaging only)
98dbm-103dbm at home and never under 85dbm in Mt Vernon, Illinois area!
How did this brain frying phone ever pass testing? Tested at 1.4mw/g my **bleep**! (by the way-1.6 is the FCC limit)
I would say HTC and Verizon technicians where able to get passing numbers by limiting output power, duty cycles and antenna gain. If it cycles at 50% then you have very poor communication ( lost voice, 3g - no 3g, etc.)
Battery already sucks and from what i am hearing the phone will be useless if i allow and update to 2.2.
I don't want forced programs I will never use.
I do not want to lose my mail.
Don't want to lose apps.
Don't want to lose contacts.
The partial FLASH update is for ADVERTISING and I pay for the extra bandwidth use in the future?
Starting to NOT love this phone I am stuck with.

Problems Receiving Emails and some data on WIFI since latest software update.

Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on this

Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error meaasage that MoblieMe has encountered a problem and needs to close. What's up with this?

After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error message that MobileMe has encountered a problem and needs to close. What's up with this?

You're welcome.
tt2

I just installed the latest Security update and now I can't open iPhoto. I keep getting a message that it quit unexpectedly because of a problem with the scene kit plugin. I have no access to my photos.

I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
I'm using a Macbook Pro Mavericks Version 10.9.5

Probably the reboot used to log into the Guest account and then your account again fixed the problem. If often will.

I just downloaded the latest Windows updates, now videos online will not work on Firefox but will on other browsers, anyone else having this problem?

After downloading the latest Windows updates I found that I could not play videos on YouTube or at other sites. Switching to other browsers I found I could play those same videos now without any problem. So I did a System Restore to determine if the Windows updates had affected video play using Firefox. The restore point was set to the day before the Windows download occurred. After System Restore was completed I could now play videos using the Firefox browser.
To make sure that the Windows update was the problem, I again downloaded the newest Windows Updates and once again could not play videos on any site using Firefox. System restore was used to again reset my computer to the day before and once again the videos would ow play in the Firefox browser.

Actually your reply took me in another direction and I found this on the Adobe site:
The RealPlayer extension for Firefox, Downloading & Recording, has compatibility issues with Flash Player 11.3. If RealPlayer is installed Flash Player content does not appear. YouTube provides an error message when you try to watch a video.
As a workaround, do the following:
Start RealPlayer.
Click the RealPlayer icon in the upper-left corner and select Preferences.
Select Download & Recording in the left menu and deselect Enable Web Download & Recording for These Installed Browsers option.
Click OK and restart Mozilla Firefox.
Once I followed this I could now again play videos in Firefox.

Latest WAD Update Problems!

Similar Messages

Maybe you are looking for