Launching safari on iPhone from native application without new page

Hii..
I have to synchronize my native application and web application for iPhone.
And somewhere in between I wish to switch in between safari and my native application.
So at first from browsing through my web application the user comes to a link where my native application (already installed by user) is launched... From this native application I wish to send control to same web page in safari where user left off... But when I try to launch the url in my native application safari opens up new page every time. I wish that I just give a call to safari like tel://7077063437 so just safari is launched showing previously opened page of web application where user left off...

HI thanks for reply..
I am going to use UIWebView... But at first if the application is not installed on user's phone then I want him to browse through my web application which shown some media contents... After that when he try to play some selected content then he is asked to download and install player application... Now to this player application I wish to attach UIWebView in it... So user wont have to go back to safari but can browser through the web application within th installed application itself...
Can you please give me more suggestion on this...
Thanks..

Similar Messages

  • IPad Air: Can't launch Safari or YouTube from the link in emails. Any idea?

    Can't launch Safari or YouTube from the link in emails. Any idea?

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Launching SAPGUI for Windows from WD application

    Hi,
    I have managed to launch an SAPGUI transaction "BRF+" at the click of a link on my Web Dynpro application. For this, I used the sample code from Reg calling Transaction code in Webdynpro ABAP
    However, this opens the SAPGUI for HTML, where the transaction is not rendered correctly. The display is restricted only to a small of the IE screen, and no button clicks are working.
    Is there any way to fix this? Or, is it possible to launch SAPGUI for Windows from a WD application?
    Thanks, Rohan.

    Hi..
    You are accessing Tcode in browser, it means we have to use sap gui for html only not windows.
    The display is restricted only to a small of the IE screen
    Do you mean, tcode opens in minimize window mode? if yes, then in create_external_window method ,  try to maximize the window by default.
    Regards
    Srinivas

  • HT201441 Trying to erase iPhone from iCloud account without having to sign into iCloud.

    I am trying to activate my iphone and it's telling me a few letters of the Apple ID that I have to sign into in order to activate my phone. When I try to sign into it on the computer, it tells me that it's not a real account. Is there any way to erase my device from that iCloud without being signed into the account? My phone won't activate...

    You'll have to get the previous owner to remove it from their account as explained in the article you were reading.  There's no way around it.

  • Launch coded UI test from other application

    Hi
    I need to launch Coded UI test i.e. coded UI test builder from another application developed in .Net. basic requirement is I will hit one button which will open the coded UI test builder, I will click on record button available on it. Will perform
    some steps and coded ui recorder will record this. After completion i will hit "Generate Code" whcih will generate UIMAP file.
    How will I do this in DotNet. Thank you for your help
    Thanks
    Varsha

    Hi Varsha,
    You know that we just start one coded UI test builder, so we couldn't use one to record steps in another one with opening two editors. So one possible reason is that you would use the custom code in your side.
    Reference:
    http://blogs.msdn.com/b/mathew_aniyan/archive/2009/02/12/hand-coding-a-coded-ui-test.aspx
    Best Regards,
    Jack 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why has my safari icon disappeared from the applications bar after the recent software update?

    Everything was working perfectly until I uploaded the most recent software update. When I restarted my laptop I found that the Safari icon had disappeared from my applications bar.  If I go to my 'recent places' and click on Safari it then reappears but only until I close the laptop down as the next time I start it up, it's nowhere to be seen.  Can anyone help?  

    by applications bar you mean "dock"? After you click on recent places and start safari it will reappear in the dock and at this point you will want to control + click (right click) on the SAFARI icon and hover to options, make sure that "KEEP IN DOCK" has a check mark next to it. If it does not, click that option. Now it will keep the Safari Icon in your dock.

  • Make Firefox open URLs passed from external applications in new tabs

    I upgraded Firefox (Mac) from 3.6.13 to 3.6.14 yesterday.
    Since then Firefox does not respond to URLs passed from external applications, as it has always done.
    The external apps pass the URL, FireFox is brought to the front, but no Tab (or new window) is opened.
    Nothing else has changed. Firefox is selected as my default browser (in Safari Prefs) and there is only one copy of FireFox on my laptop,

    Hi David
    Go to Safari Preferences>General. At the bottom you'll see an option for opening in a tab. Makes sure Tabs are enabled in your Tab panel.

  • Error while creating activities from Account application (Activity tab page

    Hi Experts,
                       We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting  below error when try to create activities from Account application in PCUI ( from activity tab page):
    Error : Activity contains error.
    Diagnosis
    This transaction has errors.
    Procedure
    To correct the errors, go to the maintenance interface of the transaction.
    To navigate to there, use the link to the account application
    Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
    Regards,
    Basavaraj Patil

    Hi Experts,
    We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.
    Thanks in Advance.
    Regards,
    Basavaraj Patil

  • Passing data from PCUI application to BSP page

    Hi,
    From CRM PCUI application, a BSP page is called for displaying a report. The behaviour of the report has to be different based on a data (field value) in the PCUI application.
    How can I pass the data from PCUI application to the BSP page?
    Thanks & Regards
    G.Raja

    Hi Gregor,
    The weblog was very useful. Thank you.
    In the current scenario, in the PCUI application there is a button, on clicking which a bsp page is displayed. This is implemented via the Navigation (URL generation) in CRMC_BLUEPRINT table. In the BSP page, on entering the details and clicking on a button, different APIs have to be called based on a flag. The flag is set in PCUI application but I couldn't pass the information from there to the BSP page. Can you please let me know how I can achieve this.
    Thanks & Regards
    G.Raja

  • Adding Form pages via JS and templates. Stop text from copying to the new page

    Hello Community,
    Over the past few days I've been getting a crash course in Adobe acrobat, and JavaScript. One of our clients asked us to make a PDF form with fillable fields, and a button that will make a new copy of the form.
    I have the text fields, template, and javascript for the button to load the template.
    My problem is that text in the fields on the first page is being copied to the additional pages when they are made.
    I have been doing a ton of research and found a lot of answerrs talking about having the fields renamed. I have included the bRename part to my JS, and the text fields show that they are a differnet name, but it still pulls the data from the first page.
    here is the script I am using. I am also runing Acrobat X standard.
    var a = this.getTemplate("New Page"); 
    a.spawn({bRename: true});
    Any suggestions would be a huge help. I can provide any additional info needed.

    You can reset the fields on the newly created page. All of the fields on the page will have the prefix "Pn" where n is the page number of the newly created page. Since your code adds the page at the end, the code to reset the fields that you can use after the code that spawns the template can be:
    resetForm(["P" + (numPages - 1)]);

  • Safari on iPad2, iOS 4.3.5, "new page" button not working...

    Hi!
    Got an iPad2 a couple of weeks ago, it was working fine. I updated to iOS 4.3.5 as requested, and since then the "new page" (square) button in Safari is not working. I can open a link in Mail, or even hold-click on a link in a web page and I get the "switching pages" animation (and see the other pages) but even though the number in the square increases (indicating the number of open pages) I can't "click" on it to switch pages...
    The rest of the toolbar buttons (back, front, bookmarks, "share") work fine but this makes using Safari quite a PITA... so much so that I'd rather copy a link and manually open it in Opera.. A pity that Opera can't be set as the default browser!!
    Any hints? I've tried deleting all Safari caches via settings (which resets the counter, obviously as it deletes the previous pages), switching off the iPad, Home+standby button for long time until it resets...
    Thanks a lot!!!

    No confusion. I hate that you cannot edit a post with the iPad but that a different discussion ....
    If you didn't see any databases in the Safari settings - then you don't have any. Those are created when you visit certain sites - for instance the Apple iPad User Guide that is available as a Safari bookmark. If you open that user guide, it puts a database in Safari and I assume its like a very specific cache kind of thing. Youcann delete them with no problem because the database will return when you visit the site again.
    The only other suggestions that I can make would be to toggle settings on and off in Safari, like hide the toolbar, turn it back on, turn off auto fill, turn it back on. No idea if that would do any good at all - and it probably won't - but I'm out of rational ideas now! :)
    I think you said that you tried this but this would be my last gasp effort unless some other user has any ideas - reset the iPad- hold the sleep and home buttons down together until the Apple logo appears- IGNORE the red slider - once the Apple logo appears you can let go of the buttons and let the iPad boot up. It can take a couple of minutes.

  • Bookmarks Open Automatically When Launching Safari on iPhone

    I have searched for a solution to this, but have not been able to find one. I don't believe my iPhone always operated like this. When I open up Safari, the bookmarks automatically pop up. I don't want this to happen. Is there a way to turn this behavior off? If so, please let me know how.
    Thanks.

    I'm not sure if this is it, however the only time that I can duplicate what you describe is if I close Safari without another web page open. In other words, if you close all the pages and leave a new blank page open, then press the home button to close Safari, then next time you open it, it will your bookmarks. I believe this is the correct function, as it expects you to open something from the bookmarks. If you are viewing a page, and then press the home button to close Safari, it should not automatically bring up the bookmarks.

  • How to launch Robohelp generated WebHelp from C++ application?

    Hi all,
    Right now I'm using a trial version of Robohelp 11, because we want to redo our programs offline help. I'm a developer and trying to launch the Robohelp with the API from our C++ MFC application.
    Steps I've taken:
    Add the RoboHelp_CSH.cpp to the project
    Add the RoboHelp_CSH.h to the project
    Disabled the precompiled headers for the RoboHelp_CSH.cpp
    Added the Psapi.lib, wininet.lib and Htmlhelp.lib to the Linker Input
    Added the #include "RoboHelp_CSH.h" to my project
    Generated a webhelp project using the Robohelp 11 trial program
    My OS is Windows 7 Professional 64-bit, done all updates. My default browser is Google Chrome, latest version.
    The thing is, my program compiles, but never launches a page. I have tried all kinds of things in my program, listing a few below. The result of the RH_ShowHelp() is always 1.
    int i = RH_ShowHelp(0, "C:/Users/username/Desktop/Controller/index.htm#<str=controller.html>>newwnd=false", HH_HELP_CONTEXT, 0);
    int i = RH_ShowHelp(0, "C:/Users/username/Desktop/Controller/index.htm#<str=controller.html", HH_HELP_CONTEXT, 0);
    int i = RH_ShowHelp(0, "C:/Users/username/Desktop/Controller/index.htm", HH_HELP_CONTEXT, 0);
    int i = RH_ShowHelp(0, "C:/Users/username/Desktop/Controller/index.htm#controller.html", HH_HELP_CONTEXT, 0);
    int i = RH_ShowHelp(0, "C:/Users/username/Desktop/Controller/index.htm#controller", HH_HELP_CONTEXT, 0);
    int i = RH_ShowHelp(0, "Controller/index.htm#controller.html", HH_HELP_CONTEXT, 0);                                                                 (with the generated Webhelp folder in the executable folder)
    int i = RH_ShowHelp(0, "Controller/index.htm#<controller.html", HH_HELP_CONTEXT, 0);                                                               (with the generated Webhelp folder in the executable folder)
    int i = RH_ShowHelp(0, "Controller/index.htm", HH_HELP_CONTEXT, 0);                                                                                       (with the generated Webhelp folder in the executable folder)
    What am I doing wrong?
    (If more information is needed for an answer please say so, I'll gladly provide more info to get this to work.)
    - Marleen

    Hi Willam,
    Thanks for the quick reply.
    All the options I mentioned in my first post did not show any effect, no browser started.
    I tried your suggestion with -1 in this way:
    int i = RH_ShowHelp((HWND)-1, "C:/Users/username/Desktop/Controller/index.htm", HH_HELP_CONTEXT, 0);
    That does not open a window either. Also tried this with my program running as administrator just in case.
    Any more suggestions by any chance?
    - Marleen

  • Is there a way of adding music to an Iphone from a computer without deleting the music already on there?

    I have music on my iphone that is not in my computer's Itunes library and visa versa, i would like to download a specific group of songs from my computer's itunes library to my Iphone's. The problem is I do not want to go through the entire process of syncing my entire library again and I fear that if do the songs that i have on the iphone will be deleated. is there a way this can be solved, maybe through icloud or something?

    The home page '''''about:home''''' is built in to Firefox and should/would not be affected.
    Though it should/would not affect '''''about:home''''', there is an entry for Mozilla on their list, if you are using some page at mozilla as your home page. On my installation that item on their list is shown as disabled; I do not recall disabling that item myself, therefore it could be their default (disabled) and they know that item is not functioning properly on their list.
    You may be correct in that there could be a conflict with another add-on. The only way to determine that is to experiment by installing '''''HTTPS Everywhere''''', disabling/enabling a few extensions (or plugins), restart Firefox and repeat until you find the conflicting item.
    *See https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems
    *See https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems
    *See https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems#w_4-troubleshoot-your-plugins
    The only other thing that comes to mind is a possible corruption of '''''HTTPS Everywhere''''' during download/installation.
    Post back once you locate a solution yourself, if it is a conflict with another add-on, or once you hear back from Electronic Frontier Foundation with a solution from them.

  • How do i add media to my iphone from another computer without syncing and deleting all the info currently on it

    My iphone was synced to my old computer
    How do i add content to my phone from my new computer. It says i can only be synced with one computer and it will delete everything on my phone to sync with the new computer.
    This doesn't make much sense. What am i missing?

    It does make sense.  The iPhone is a one-person device and just syncs to one computer.
    The way it should work is as follows:
    Old computer content ---> New computer
    New computer <---> syncs to iPhone
    But the way you are trying to operate sounds like:
    Old computer content ---> iPhone
    ... and ...
    New computer content <---> iPhone
    So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

Maybe you are looking for