Layering images on top of one another and adding hotspots that reveal a different picture below

This is the page Im currently working on http://www.andrewtoyota.com/2014-highlander If you look on the right there is an image of a car with 9 different colored circles below.
First I was trying to find a way to apply a hover effect to the circles to display the correct image of the car with the corresponding color. It wasn't working correctly because I couldn't find a way to have the images lay on top of each other with all the circles (being separate images) to (when clicked) link to the correct car image.
So I brought my images into Dreamweaver and I'm trying to figure out how to do it in there. I know there is a way to apply certain behaviors to images, clickon, but I can't figure out how to lay my images on top of one another. There has to be a div tag to do so right?
I have a jpeg for each image (a horizontal jpg including the text on left then the car then the colors below) I thought if I uploaded all the images then applied a hotspot to each circle on every image then linked that circle to the right image, when clicked, it would work. Its not seeming to work. One problem is all my images are layed on one above the other... I need to get it so only one shows at a time and then get the hotspots to work so when clicked the user is still in the same page just a different image. Either clicked on or hover.
This is what im working with right... I have applied hot spots to the different colors... how do I have only one image showing at once... yet each hot spot linked to the correct image?!

You are looking for "remote rollover" or "disjointed rollover" if you were to do a search on Google.
Basically, you have a "starter image" and then when remote images or hotspots are moused over, the starter image is changed to a new image by javascript. There is only ever 1 actual image in the source code on the page at any given time.
Layers (APDivs, position:absolute, etc) is a terrible direction to go for this.
In DWCC...
1. Insert your starting (no rollovers) image
2. Click the image and give it an ID in the Properties window
3. Click/select the link image/hotspot/text that will fire the rollover
4. Click the + in the Behaviors panel and choose Swap Image
5. Select the id of the image set in step 2
6. Browse to the "on" version of the image for the "Set Source To" text field
7. Make sure Preload Images is checked and click OK.
8. Click the + in the behaviors again and choose Swap Image Restore and hit OK
Repeat for each hotspot.

Similar Messages

Putting photo layers on top of one another

In Elements 4 can you put multiple layers of photos on top of one another and how?

Eden,
1. This program depends on utilization of layers to achieve the best result
2. Open image 1 - the one that you want to add something into
3. Open image 2 - the one that you want to select something from, to add to image 1
4. Use one of the selection tools, for example the magnetic lasso tool, to select that which you want to copy from image 2. When you do this, you will see "marching ants" around the selection. Go to Edit>copy.
5. Bring up image 1, go to Edit>paste. You should now see image 1 as the bottom layer, and the selected portion of image 2 above this. Surrounding the selection is a checker-board pattern which represents transparency, allowing you visibility.
6. In order to position the pasted portion, use the move tool.
Try this and let us know how you make out. Don't try for perfection initially, just attempt to follow this drill until you get the hang of it.
Forget about the healing brush for now. This tool is used for another purpose.
Ken

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times.

I was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back????

i was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back???? please

Only way to get it back is to restore your phone from a backup, if those pics were included in that backup.
But most likely those pics are gone.
What you should've done was import http://support.apple.com/kb/HT4083 the pics to your computer and after you restored from your old backup, you could sync those new pics to your phone via itunes.

HT1766 sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant

sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...

See Here...
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

Horizontal menu looks fine but sub menus drop down one and move to the right over the top of one another

Help, My horizontal menus look great but when I add sub menus to them they drop down one place and move to the right side where they be over lapping each other. What can I do? I'm working with adobe muse.

It might be faster to start over. File > New > HTML page. Insert Spry Menu.
Customize Spry Menus by David Powers
http://foundationphp.com/tutorials/sprymenu/customize1.php
When making code changes, use /**CSS Comments**/ to remind yourself what you did in case things go wrong. ;-)
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I can't print my playlist properly. The words are coming out on top of one another

I can't print my playlist properly all of a sudden. The words come out on top of one anther.

We can't access a saved screenshot that is on your computer.<br />
You need to upload the image to attach it.
If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I transferred my iTunes library from one external hard drive to another and added more music on the same day. How do I get rid of my duplicate files without going through them one by one which would take forever?

Please help. I have transferred my iTunes library from one external hard drive to another plus added additional music now I have duplicates of the same music in many albums. How do I delete the duplicates without going through them one by one which would take forever? I understand how to get the "show exact duplicate" feature up on iTunes but, because they were added to the library on the exact day I can't seperate them I'm that manner. So each duplicate is right next to eachother in the exact duplicate screen.

My DeDuper script is designed to help clean up. See this thread for background.
tt2

My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

Moved InDesign from one computer to another and problems with that

Hi,
New to Adobe so please, if I'm posting in the wrong spot or the wrong way feel free to politely tell me where to go.
Using Windows7/64Bit
Adobe InDesign V8.0
We recently purchased this product for one of our users. Worked and had no complaints.
User's laptop exhibited signs of imminent departure soon after installation - replaced laptop with new unit and retained old laptop.
User immediately complained that some features were 'greyed out'.
Firstly drew my attention to the 'Paragrah Styles' in the toolbox or menu on the right hand side. User had created, what she refers to, as a shortcut menu on this panel on the right hand side.
Found a thread indicating method for repairing damaged preferences.
Backed up both the directories found under:
C:\Users\USERNAME\AppData\Roaming\Adobe\InDesign\Version 8.0\en_US
C:\Users\USERNAME\AppData\Local\Adobe\InDesign\Version 8.0\en_US
Copied same folders and content from old laptop and you wouldn't believe it but it worked a treat.
However, user had failed to point out that none of the other features were working also. Eg. Pages, Layers, Switches etc.
It seems that the options appear on this panel on the right hand side but you cannot interact with them at all. Whilst a number of different pages appear in the Pages tab, none are selectable
Any assistance would be gratefully received,
With thanks, in advance,
Martin

Hi,
Firstly apologies for posting a question then leaving it for so long. Illness can never be scheduled in :/
Secondly, Bob, you were 100% correct. Fonts were set to 125% and Aero was enabled. I reduced font size and also disbaled Aero and it immediately fixed the problem.
Now, the question is which one of the 2 was more likely the problem as I foolishly applied both fixes at the same time. The answer would be the font size as Aero was also enabled on the old laptop which was working OK.
Many thanks for the responses, many thanks for your help and tips my hat to Bob - well done.
PS I did originally do a full install onto the new laptop.
Martin

How do you remove error 0X00000709 from your computer? I just removed one printer and added another!

     I have a HP Pavilion Elite HPE computer and had an HP 6500 printer as my default. I purchased a LaserJet Pro CM1415 and loaded it into my computer and removed (I thought) was the software for the HP 6500.
     However when I try to make the CM1415 my default it gives me an error 0X00000709 and tells me I can not do it. I no longer have any other printer listed, however I noticed some programs (Adobe for instance) don't even recognize the new printer, just the 6500 which got removed. I have already removed the drivers (software) for the new printer and reloaded it. Also I checked the registry and the 6500 is listed there. I did nothing with the registry at this time.
     I would like to know how I can remove this error and make my new printer the default (only one listed) one? Thanks in advance for any and all answers

Hello Porgeman,
You may want to try the solution that is mentioned on this Microsoft Answers thread.
http://goo.gl/y3mtw
Method: Try to change the default printer value in registry key and check if it helps.
Registry Disclaimer: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 .
How to back up and restore the registry in Windowshttp://goo.gl/UPP7r)
a) Click on Start.
b) Type regedit in the start search and click Enter.
c) Move to the location mentioned below.
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
d) In the right column, you will find key Device, change the value to your Printer name.
e) It is of the format for example: "HP LaserJet 4250 PCL6,winspool,Ne03:".
f) Right click on the value and click on Rename, change it to your printer name.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Stacked events. Events get added on top of one another.

I have noticed that using the "addEventListener" and coming back into a frame, I get multiple events tied to the same component.
The design I am using jumps to an "I" frame (intermediate) and then back to the "M" frame (main) when the user performs an action.
I add event listeners to several components when I enter that M frame. What I notice is that the events seem to stack up for a particular component.
For instance, if I enter M frame, N number of times and addEventListener("click", handleEvent) to a radio button, I get N calls to handleEvent when
the user clicks on the radio button. I guess this kinda makes sense but is not what I want. I just want one event of a particular type (in this case "click") to
be associated with the a particular component. I get around this issue by removing the event(s) in the I frame. Then they get reinstalled in the M frame. Only one at a time.
So, just wondering about this behaviour. Is there a way to check for the number of events that are currently active on a particular component? Better way to handle adding events?

use a boolean to add listeners once.

Playlist prints track listings on top of one another....looks like big black blob

Playlist prints tracks all within one inch or so.........this has happened before.......don't recall what I did to fix.

After going through two Apple 23 inch cinema displays, I threw in the towel and purchased a ViewSonic 23inch cinema display. I am very pleased with it. Absolutely none of the backlight bleed that was a problem with the Apple monitor. They accepted the return without any restocking fee, leading me to believe Apple is aware a problem exists with them.

My 4890dw Image Cllass Printer prints one page and then shows error message.

After clearing the error message, it will print multiple pages (including the first one). Have reinstalled the driver; no help.

Hi Pmullins6!
So that the Community can help you better, we will need to know what the error message is and the Computer Operating System you're using. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks!

I am unable to print a proper playlist in the jewel case format. Lines print on top of one another. No problem with other print formats

I am unable to properly print a playlist in the jewel case format. All lines bunch together. I have no problem with other print formats. Help please.

If it is a USB powered external, no AC adpater, that may be the reason. Mac notebooks are known to have low powered USB ports. You can get around that with a Y USB cable to connect to 2 USB ports at the same time.

Layering images on top of one another and adding hotspots that reveal a different picture below

Similar Messages

Maybe you are looking for