Layout EL 31 : i  need to add the business partner name

Dear Experts ,
I need to change the layout for all users by adding the field "business partner".
I can't change and deflag the field "user specific" when i'm saving the variant and the goal is to flagg only the "default setting".
Thanks in advance for your help

Dear experts,
I'm dealing with the note 526696 and i have some questions :
- where i can found the switch ISU_LOC_CI_EHP5?
- where i can found the business function  ISU_LOC_CI_2?
I need these infromation for the table TE410S because nothing concerning the field EL31_DEFAULT_LAY is stored.
Best regards,

Similar Messages

  • MASS change of the business partner name

    Hi All,
    I have an immediate requirement to do a mass change of the business partner names.  I used the Tcode MASS but not sure of the procedure. Can anyone kindly guide me how to go about processing the mass change?
    Thanks,
    Venkat.

    Hello Venkat,
    Have a look at SAP Note 802804. This should help.

  • Need to change the business partner on multiple documents (SC's, PO's, etc)

    When a user leaves the organization, their business partner number is no longer valid.  Therefore, any documents they have created are no longer accessible for changes, good receipts, etc.  We are looking for a way that we can find all open SRM documents for a specific business partner and add a new business partner number to these documents in mass, rather than having to change each individual document one by one.

    Hi Patricia,
    This will be a new business requirement. Its a Enhancement.
    So you have to take technical people's help who can help you to develope the program.
    For example, if someone leaves the org then that PO has to be transfered to someone else, so this is called as PO onwership change. With the help of this program , you can put document no and new user id and execute it. it will transfer the ownership of the PO. Mass changes is also possible.
    Also to get the Goods receipients name , you can develop prg for PO status , which will give information about relevant SC, PO , Goods receipients name, G/ L account, account assignement etc.
    Its a totally new business requirement, which can be done with ABAP.
    I hope this helps you.
    Regards,
    Sheetal Salunkhe

  • How may I change the format to enter new contacts?  I need to add a business name and would like to change the defaults to work rather than home.

    I am entering new contacts into the contact app.  I need to add a business name and would like to change the default for phone numbers from home to work.  I am entering a large amount of business cards

    rcolbroth wrote:
    Is there anyway of creatiing a different name for this Folder rather than 2013?
    If you are using one of Lightroom's "date-based" folder templates, then the folders are created in accordance with the image capture date, not the date that you happen to import it. If you specifically want to use the import date for your folder names then you probably don't want to use the Lightroom date template, and instead you'll need to setup your folder names manually.
    The vast majority of users that use date-based folder naming schemes will use a standard Lightroom template, i.e. based on the much more meaningful image capture date.

  • I need to Add the configuration file '.airinstall.cfg' to the air bundled runtime installer directory. where do i get the airinstall.cfg from

    i need to Add the configuration file '.airinstall.cfg' to the air bundled runtime installer directory. where do i get the airinstall.cfg from what are the contents of the .airinstall.cfg file please help.

    http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • In Dreamweaver, I need to add the directory to the File being inserted in the following Insert Code:    MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 1, 255, Request.Form("DocLocation")) ' adVarWChar

    I have the following code:
    <%
    If (CStr(Request("MM_insert")) = "form1") Then
      If (Not MM_abortEdit) Then
        ' execute the insert
        Dim MM_editCmd
        Set MM_editCmd = Server.CreateObject ("ADODB.Command")
        MM_editCmd.ActiveConnection = MM_NewFLSSARDB_STRING
        MM_editCmd.CommandText = "INSERT INTO DocumentTable (Title, DocLink, UpdatedBy, UpdateDate, Type, Comments) VALUES (?, ?, ?, ?, ?, ?)"
        MM_editCmd.Prepared = true
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param1", 202, 1, 255, Request.Form("DocumentName")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 1, 255, Request.Form("DocLocation")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param3", 202, 1, 255, Request.Form("UpdatedBy")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param4", 135, 1, -1, MM_IIF(Request.Form("UpdatedDate"), Request.Form("UpdatedDate"), null)) ' adDBTimeStamp
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param5", 202, 1, 255, Request.Form("Type")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param6", 203, 1, 1073741823, Request.Form("Comments")) ' adLongVarWChar
        MM_editCmd.Execute
        MM_editCmd.ActiveConnection.Close
        ' append the query string to the redirect URL
        Dim MM_editRedirectUrl
        MM_editRedirectUrl = "testFLSSARSuperAdminIndex.asp"
        If (Request.QueryString <> "") Then
          If (InStr(1, MM_editRedirectUrl, "?", vbTextCompare) = 0) Then
            MM_editRedirectUrl = MM_editRedirectUrl & "?" & Request.QueryString
          Else
            MM_editRedirectUrl = MM_editRedirectUrl & "&" & Request.QueryString
          End If
        End If
        Response.Redirect(MM_editRedirectUrl)
      End If
    End If
    %>
    For param2 above I need to add the directory "Docs/" to the command so that the file can be found by the User.  How do I do that?

    If all documents are going to the "/Docs" folder, then I wouldn't include it in the inserted data as you can just add it dynamically where needed. If you do want to include it and it's not part of the posted form data, then just concatenate it (&) prior to inserting into the table.

  • I need to add the logic for posting key,

    I need to add the logic for posting key, if posting key = 50 then amount is credit (add negative sign in amount field).
    I creadted this scenario in mapping, We wanted to make sure that the negative sign was placed in the amount field if the posting key was = 50.  So it seems we are good.  We will just need to test.
    How i can test this case?
    Please do needful.
    Thanks in advance.

    Hi,
    You need to use an IfElse node function in your mapping in which the input should be the posting key from the source structure.
    You need to check in the IfElse statement whether the posting key=50, if it is true, then use concat node function to concat the negative sign("-") along with the original value to be passed to the amount field on the target side. Else, if the condition is false(i.e posting key!=50), then simply pass the value to the amount field as it is without adding the negative sign.
    After the mapping is done, go to the test tab and then insert the values in the source fields and then execute from the lower left button showing start transformation.  You need to test with the value of posting key=50 once and with the value not equal to 50 once.In the first case, the output amount field should have the negative sign, which should not be present in the second case.
    You will find your target structure in the righter half of your screen. That's it mate
    Thanks
    Biswajit

  • In my opinion, I think the rolling function of Muse need to add the group status function and group!

    In my opinion,
    I think the rolling function of Muse need to add the group status function and group!
    Because when the processing of many things, but the effect is the same,
    but to repeat many times, it is necessary to group similar function of PS.

    I learned how to install the 9.1.3 upgrade by renaming my app, and that works fine. Logic is now recognized in About My Mac as a 64 bit app, which is where I started. Thanks for your help.
    Now I have to figure out how to get my Novation to work through Automap in some way that I can finally get mixer functions. I'll repost the second part of this if I'm still having a headscratcher about it tomorrow.

  • How do I add the customer's name to Workflow Notification email subject line?

    How do I add the customer's name to Workflow Notification email subject line?
    I'm expecting that I need to add a tag, but I'm not sure what the correct tag would be, I have tried a few but it just writes the tag I inserted and not the customer's name.
    Thanks

    This is something you can not add at the moment. You can change the layout a bit of workflow notifications from the system but you can not change the subjects at this time to render a system tag like that.

  • How to add the business transaction to t-code : CIC0 in win client

    Dear sir,
    We use CRM 5.0 . We would like to add business activity tranaction into t-code : CIC0. But I don't know how to do. Please kindlyadvise how to add the business transaction to t-code : CIC0 in win client.
    Thank u and best regards,
    Vimol

    Hello,
    For each transaction type (e.g. Sales Order, Business Activity, opportunity, ....) you can maintain in which channel (IC WebClient, IC WinClient, SAPGUI, PCUI, ...) they are allow to be used. Probably the transaction types you want to see in the IC WinClient (= CIC0) are not enabled for this channel, that's why they don't appear in the WinClient (CIC0).
    How to do this?
    SPRO>CRM>Transaction>Basic Settings>Define transaction types
    Here, look for the transaction types you want to enable in WinClient. Select the transactiont type and select "Channels" from the left pane. Here, add the channel "IC WinClient" (or something like that, I don't know the exact name anymore, in newer versions this no longer exists).
    Save and restart the CIC0, after this the transaction type should be enabled.
    Hope this helps,
    Joost

  • Add the carrier description/name on a sales order

    On sales order in Tax tab when a carrier is selected, it´s only shown the field with carrier cod without his description/name.
    How can I add the carrier description/name on a sales order?

    Marcio,
    This should be simple.
    Save this SQL Code and attach it to the Transport Name User field /  any other field where you want the shipping name.
    SELECT T0.[TrnspName\] FROM  [dbo\].[OSHP\] T0 WHERE T0.[TrnspCode\] = $[ORDR.TrnspCode\]
    When I use $[ORDR.TrnspCode\] it refers to a field value on the form.  I am presuming this is the field you are using.  If your TrnspCode is in a different field.  From the View Menu click System Information.  This will enable you see the table and field information on the Status Bar
    Use this information instead of $[ORDR.TrnspCode\]
    Suda

  • Need to update the business place and section code for the advances

    Hi,
    I need to update the business place and section code for already posted advance payment requests (f-47), advance payments (f-48) and clearing documents (F-54).
    I can able to update the business place and section code for only invoices those are coming from MM route in J1INPP.
    guide me
    sateesh

    Hi ,
    Please follow the below point as per note no 640231
    2.  Path : Transaction SM31 . Enter the table name as TRWPR and press
                                                                      Page 2
        maintain .
        a) Delete all entries linked to component ZIND if they are present.
        b) Check that, entries as specified below exist for Component IND.
           Business
           Tran.    Time     No    Component        Function Module
           DOCUMENT CLOSE    043   IND              J_1I6_UPDATE_BA
           DOCUMENT CLOSE    044   IND              J_1IEWT_UPDATE_SECCO
           DOCUMENT PREREV   810   IND              J_1I6_CIN_DOC_PREREV
           DOCUMENT CLOSE    810   IND              J_1I2_COPY_TO_LOCAL
           RABELEG  ERGAENZE 810   IND              J_1IEWT_COPY_BUPLA_FBZ
           BELEG    POST     810   IND              J_1ITDS_TABLE_UPDATE
           DOCUMENT CHECK    810   IND              J_1I6_VALIDATE_GR
           DOCUMENT POST     811   IND              J_1IEWT_UPDATE_PROVISION
           BELEG    POST     811   IND              J_1IEWT_UPDATE_PROVISION
           BELEG    CLOSE    820   IND              J_1I2_COPY_TO_LOCAL
           DOCUMENT CHECK    820   IND
           J_1I6_VERIFY_GR_EIC_QUANTITY
           DOCUMENT CLOSE    820   IND              J_1I6_COPY_TO_LOCAL
           DOCUMENT CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL
           DOCUMENT POST     821   IND              J_1ITDS_TABLE_UPDATE
           BELEG    CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL.
        For the first two entries which are marked with sequence number 43
        and 44 for the Business Transaction 'DOCUMENT' and Time 'CLOSE' ,
        ensure that the sequence number is below the number for function
        module FI_DOCUMENT_CLOSE. This is to ensure that these two functions
        are processed in time for other checks in Financial Accounting.
    MIRO documents also will update the Business place section code.
    Reg
    Madhu M

  • Add custom fields to the business partner (UKM_BP) thru BADI

    Hi
    I want to know how to add Additional business partner attributes(custom fields) to Business partner (Transaction : UKM_BP)
    I also added the custom fields to structure UKM_S_BP_CUSTOMER_EXTENSION in the method FILL_FIELDS of BADI UKM_BP_ADD_FIELDS, But nothign is populating on the screen of UKM_BP after activating the below BADI's with SAP provided sample code with above structure.
    there are 2 BADI's for this requirements but it doesn't any thing about the screens
    UKM_BP_ADD_FIELDS
    UKM_EV_FORMULA
    Please let me know the detailed steps other than activating these BADI's with sample code by SAP.
    Thanks
    Govi

    Thanks for your reply
    BADI - UKM_BP_ADD_FIELDS
    Documentation of this BADI shows as follows...
    With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
    To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
    Methods of this BAdI:
    FILL_FIELDS
    To provide additional fields for the formula editor
    FILL_ADD_INFOS and SAVE_ADD_INFOS
    To define additional information for the following data in table form:
    Collateral
    Negative event
    Check exceptions
    Credit insurance
    I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
    I have looked at BDT Business data toolset
    http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
    but i didn't get any idea ...
    Can you please elaborate and let me know how to do this for my requirement?
    Thanks
    Govi

  • HT2470 I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home f

    I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home folder. This is very frustrating. I would not have let him put his name in there if I didn't think you could change it. Someone please help!

    Delete his user account and create your own, using your name.

  • Urgently, how to use the EEWB to ad new field in the business partner page

    Hello All
    I am working on CRM 5.0 EEWB
    I am trying to add new field in the business partner page I followed the steps for creating the project and the extension but I faced some problems
    1-I chose the package BBP_BUPA_MAIN    BBP Business Partner General
    I created two transport requests for the workbench and the customizing
    2- I created an extension with EEW Bus. Object: BUPA and extension type: ADD_NEW_FIELDS
    3- I got an error that <b>"Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"</b>
    I tried to change the package but the same problem occurs and if I choose a custom made business package I get a similar error but, before the wizard starts
    I want to know the exact steps to create new field using the EEWB
    Regards
    Jacopo Francois

    Hi,
    Error info: "Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"
    Clearly states that you need to assign some different name to the package which is not reserved by SAP as Z### is already reserved by SAP and thus you will not be able to create the enhancement in the same.
    Best Regards,
    Pratik Patel
    <b>Reward with Points</b>!

Maybe you are looking for