Layout in PS and then DW

Hi there.
DW CS3.
When doing the initial layout of a site in PS, do the cuts
and everything,
can I still use CSS to arrange the cutout pieces which was
put by PS in a
table?
Does one need to use a table or can everything still be done
in CSS without
any tables?
Regards,
Deon

Perhaps this will help:
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Don't be concerned that it is written for Fireworks. The
approach can be
adapted to any image editor.
Walt
"Deon H" <[email protected]> wrote in
message
news:[email protected]..
> Hi there.
>
> DW CS3.
>
> When doing the initial layout of a site in PS, do the
cuts and everything,
> can I still use CSS to arrange the cutout pieces which
was put by PS in a
> table?
> Does one need to use a table or can everything still be
done in CSS
> without
> any tables?
>
> Regards,
> Deon

Similar Messages

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

Application shows - "The server refused the connection " when I click on project from ATG BCC and then layout

Hi,
Application shows - "The server refused the connection " when I click on project from ATG BCC and then layout. Can you please tell me the cause of the error and the log file where i need to debug. We have deployed on Weblogic Server.
Thanks

Hi,
You can see ATG server log, located at ATGXXX/home/servers/yourPublishingServer/logs, and you can see your wwblogic server log.
In WebLogic, the logs are located at domains/your_domain/server/yourPublishingServer/logs.
Check the logs and then return with it, so we can help you.
Hope it helps.

Attempt to generate WebHelp (Primary Layout) after updates hangs and then shows "Not Responding"

Hello! I am attempting to generate after making a number of updates to topics in a large project using RoboHelp 7. RoboHelp 7 was recently installed on my machine by an IT staff person. It has been several years since I worked with this project in RoboHelp and at that time we used RoboHelp 5. I have attempted to generate WebHelp but the application hangs and shows "Not Responding" about half-way through Updating files. When I look at the folder (test folder on my computer's Desktop) to which I try to generate, about 2/3 of the topics and subtopics actually show in the folder even though the generate process failed. I have tried to work with IT but no one there knows RoboHelp. I cannot identify (don't know how exactly) where the problem is and how to remedy. Can someone please offer some guidance? I'm very rusty with RoboHelp's processes...it seems as though something has gone missing but I don't know what to look for and where to start looking! A co-worker has also recently had RoboHelp 7 installed on his computer (per IT remote install) and has helped update topics other than those I've updated in the project. He also encounters this problem when he tries to generate the project on his workstation.

Thank you, Peter! The project is a large policy manual which resides on a shared network drive but we place a copy of the project's "working" folder on our computer desktops to allow updates and maintenance. When we generate the project after making updates, the compiled project loads into a separate subfolder in that "working" folder and a member of our IT department pulls the files out of that folder to "deploy" the manual to our users. This process has worked for over four years, however, for most of that time, there has been only one person doing the work and that person is now out of the office for an extended period of time. I rather got tossed back into the fray at the last minute when it was decided that a set of updates was needed by November 1--a deadline that has not been met, of course.
Since posting the plea on the forum, I've had ongoing contact with an IT staff who tells me the best solution right now is to save the files we each updated, request a file restore back to the last known good state, and then try to re-incorporate our changes to the clean version. In the interest of time, we are pursuing that...your additional thoughts and feedback about the situation would be most welcome.

Can I perform all my layout in InDesign on a PC and then move to a MAC version for publishing?

I have access to a MAC to do it, can I complete everything on a PC first? any pitfalls?
Mike

I was just looking for answer to the same question. I`m Windows user but I`m planning to publish magazine using inDesign. According to this very informative page https://creative.adobe.com/dpsse
I found that I will need to invest in both any Mac PC and iPad. My questions are: can I add interactivity on PC and then transfer to Mac? as iPhone user, I can try to test on iPhone prior to purchase iPad, but then I would have to build for iPhone, instead of iPad, is it correct?

Is there a way to force the tab order to skip a page and then return to that page on a form?

I have a multi-page form with a required page layout. The problem with the current form layout, is that I'm finding my users are getting to page "20" and it seems like the natural end of the form...and stop entering information and submit. The problem is, there's an additional form field on the next page that MIGHT need important information.
The information in that final field is only present in about 10% of submissions, but is crucial to the file if present. As I said, the page layout is required.
Is there a way to change the tab order to go from the last form field on page "19" to the form field on page "21" and then back to the form fields on page "20"?

Thanks try67, but it isn't a required field. As I mentioned, only about 20% of submissions will require filling it in.
There isn't a submit button. Not even sure what I would do with/or how I would implement a submit button. After processing the form, the filled out form is 'Saved As' to keep the original forms integrity intact. The 'Saved As' file is renamed appropriately, and then it is printed to a PDF file and attached to the appropriate customer file.

HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?

Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

I just updated and downloaded the new version of iTunes. I then downloaded some music and now the music won't play on my iPod or in my iTunes. The tracks play for a few seconds and then skip to the next track

I just downloaded and updated the newest version of iTunes. After updating I downloaded some new music and synced the iPod. The music doesn't play. It'll play about 30 seconds of the song and then skip automatically to the next song. I restarted the iPod. I restored it. It still didn't work. Then I tried listening to the music from my laptop straight from iTunes...and it's still doing it.
How do I fix it?

I'm assuming the tracks that won't play copy/are displayed with exclamation marks. This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Can you place an image in a div tag and then add type over top of it?

I told someone in class lastweek that I wanted to be able to
place type over an image. They said you can just add the image into
the div tag as a background image, which will allow you to then
type over it if you like. How is this done? I have tried and
failed. I have an image that is 200x590 going down the left side of
my page. I want to run type over it, and keep the image consistent
on every page, but change the header and type. I've seen this in
several sites. How do you do this with the div tag box model method
of building a page. Can I insert an image into the div and then run
type over it. What does the code look like?

Here's an example of using a css and a background image to a
table cell...
sample principle for a div
#div {styles go here{
http://tinyurl.com/yqeptp
You may also want to go through the beginner css tutorials at
the Adobe
site:
http://www.adobe.com/devnet/dreamweaver/css.html
(pay attention to the ones
by Adrian), beginner moving onto to creating full css
layouts.
Hope this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Forum Posting Guidelines:
http://www.adobe.com/support/forums/guidelines.html
>I told someone in class lastweek that I wanted to be able
to place type
>over an
> image. They said you can just add the image into the div
tag as a
> background
> image, which will allow you to then type over it if you
like. How is this
> done?
> I have tried and failed. I have an image that is 200x590
going down the
> left
> side of my page. I want to run type over it, and keep
the image consistent
> on
> every page, but change the header and type. I've seen
this in several
> sites.
> How do you do this with the div tag box model method of
building a page.
> Can I
> insert an image into the div and then run type over it.
What does the code
> look
> like?
>

How can I duplicate a smart object and then edit it, without affecting the original?

I have a vector element from illustrator that I am placing in a tshirt mockup in photoshop. I have the layout essentially how I would like, but I am trying different color variations. I would think to just duplicate the first placement and then edit the color of the resulting copy, but this affects both the copy and the original. I looked into it a bit further, and found that I should try the "replace contents" option under smart objects, and that this would change the copy. So I go back to illustrator, made a copy of the original vector, and then made the color change I had in mind, and then saved it as a separate document that I could then use in replacing the contents of the copied. This however, is still affecting both smart objects!
I have tried this as both linked smart objects and embedded smart objects without success.
Ultimately, I simply want to maintain the position of the original layer with the duplicated and edited layers. If you know of a better way, please share!

I'm on CC on a Mac.
What 21 is talking about is making some sense.
I am able to create new smart object via copy, then create a variation on the original file linked in the parent smart object. Then I save that from illustrator with a different file name. Then I go back to photoshop and replace contents of the new smart object, linking it to the newer illustrator file.
This gets around the problem, but it takes a few more steps than the same thing did it in earlier versions of photoshop.

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

Auto layout of photographs and 3 related questions

using mac 10.5 and id cs4
new to indesign but have some exp with other software
i have 200 photos to place on pages 11 by 17 inches--
i have 3 other questions
1. i create a page--now i want to add another page is there a way to do this or do i have to create another page?---save as preset maybe?
2. now i want to add to these pages automatically 200 photographs 4 by 6 inches
if i need to create boxes for the photos how do i create a preset box?
sorry for the number of questions but they are all related and i assume this has been addresss before but net homework lead nowhere
i incidently tried ps elements but would not install on my mac version
i have a copy of ps cs4 also
really frustrated at this point
tia
peter
i looked into creating a book but could not find way to increase the size of the book pages

Bustaroo wrote:
problem with tutorials for me ( more that 40 years of using various
software) is that they all do the basics its only in the finer points that
they differ!!!
I hope this doesn't come across the wrong way; I mean it positively, from my own experience as a user and trainer: The "finer points" of difference between software products that seem to do similar things, are not trivial! My French teacher told us that there are some important rules, like, "All nouns that end in 'e' are feminine! (pause) EXCEPT..." and then he gave some of the many common exceptions.
X-number of years doing <whatever> usually means X-number of years doing what I've learned to do and what behaves as I've learned to expect to behave. Those solid lessons and habits sometimes interfere with seeing other possible approaches, techniques, and outcomes for the same starting points. It's terribly frustrating to find that your reliable tools aren't effective. If you ever were comfortable with driving a stick-shift car, then changed to an automatic-transmission car, think of how many times you were surprised and frustrated when you stomped your left foot onto a non-existent clutch, until you adjusted to your new environment.
P Spier wrote:
A Document is a single file, which can contain one or many pages. Pages appear in "spreads" that can contain from one to ten pages. To save a document, use the File > Save or Save As... commands -- nothing odd about that.
Are you familiar with the concept of the Master Page? Master pages are like templates for pages. Put stuff on the master page, then any document page based on that master page will have those elements in place (but they will not be selectable without overriding). You can hover a loaded "Place Gun" over an empty master frame and click, and the ID will automatically override that frame and put the content into it.
Some people are comfortable thinking of a master page as a background that "shows through" on the document pages that the master is applied to.
By default, every new document starts with two master pages, [None], which is used when you have other masters and you need a page with no master items, and A-Master which is the default name for the default master page applied to any pages when you first create the document. It starts out blank, unless you've checked the box for automatic text frame in the document setup, then it will have a single text frame that fills the are inside your margin guides. If you've selected "Facing pages" in Document setup, A-Master will actually be a two-page spread (with the spine in the center) and any automatic text frames will be "threaded" from left to right across the spread so that you can "autoflow" text. Automatic text frames are NOT required in most cases and are often a hindrance rather than a help. Page setup, including dimensions, margins, columns, and bleeds, is all together in the document setup dialog when you first create a file (you are creating the margins and columns for A-Master), but not all pages need to have the same margins or column setup (nor even the same size as of CS5), so once a document is created, you'll find margin and column adjustments under the Layout Menu. Changing the basic page size is still found under the Document Setup command in the file menu, but adjusting the size of an individual page in CS5 is done with the Page tool.
A Book, in InDesign parlance, is a container for a group of document files that allows you to work on sections without having to scroll through one huge file and also allows for synchronizing colors, styles and even master pages across all the files in the Book. Individual documents may be included in more than one book, if you like, which allows you to multi-purpose documents.
For some users, the idea of a book as a container for a group of files, thinking of the book as a folder, is fine. But other users may be more comfortable thinking of a book as a list of file names that should be treated as a single group, and the instructions for paginating, and applying other properties to them.
Trust me, InDesign is a VERY complex bit of software, and you'll benefit immensely form buying Sandee's book or getting a subscription to Lynda,com.
I like to think of InDesign as a pretty straightforward software application, and that its sheer number - several hundred - of specialized "core" plug-in components is what makes it complicated. There's at least a bit of learning necessary to take advangage of each of these "building blocks."
Please keep returning with your questions as you progress.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

Can't switch input layout in Contacts and other ap...

When Contacts is oepend, it's impossible to switch input language with Ctrl-Space.
You have to enter 1 letter and then it is possible to switch layout.
Any ideas how to fix this?

Are you talking about creating titles?

Layout in PS and then DW

Similar Messages

Maybe you are looking for