Use different Layouts for Summary and Details in Drill down report
Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
gt_layout_s type slis_layout_alv,
gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
is_layout = <b>gt_layout_s</b>
i_callback_top_of_page = g_top_of_page
i_callback_user_command = g_user_command
i_callback_pf_status_set = g_status
i_save = g_save
is_variant = gs_variant
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
importing
es_exit_caused_by_user = gs_exit_caused_by_user
tables
t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
is_layout = <b>gt_layout_d</b>
i_callback_top_of_page = g_top_of_page
i_callback_user_command = g_user_command
i_callback_pf_status_set = g_status
i_save = g_save
is_variant = gs_variant
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
importing
es_exit_caused_by_user = gs_exit_caused_by_user
tables
t_outtab = it_detail_disp.
Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. <b>What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT.</b> You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers<u></u>
Similar Messages
-
How to use different iViews for variables and queries?
Hi all!
I need to use separtate iViews for storing variables and extracting queries.
For example, I have one variable "Currency" for two different queries, and I need that all of these queries (in separate iViews) would use the value of currency was put by user in the first iView with only one input.
How can I do this task? Is it possible at all?
Thanks for replies.Hello Alex,
You have to use EP client framework (EPCF) in your development.
I hope this idea will help you.
Kind regards, Pino. -
How to configure Mail to use different ports for POP and SMTP?
I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots. -
Use different portals for authentication and collaboration
Hello,
I would like to request your help on a portal issue.
I have installed a dual stack(ABAP+Java) Enterprise Portal (EP 6 - NW 7).
The ABAP stack is required in order to implement user collaboration.
However, another requirement is that the users be authenticated through
an LDAP server (Microsoft Active Directory 2008).
Because of the ABAP stack, it is not possible to connect the portal to the LDAP.
In order to implement LDAP authentication, another EP instance was installed on the
same machine which has only Java stack and not ABAP.
This Java-only EP was successfully connected to the LDAP directory.
My question is IF and HOW it is possible to have the users login to the ABAP+Java portal
using the Java-only portal to authenticate.
Regards,
Kontogianni EleniHi Craig,
this is not really our case. What we want to achieve is to be able to use one portal (Java only) for user authentication using the LDAP directory and the other one for all other portal services.
We tried to implement a solution similar to the one that you mentioned but there were some problems. We would have to redirect the login page of the ABAP+Java portal to the login page of the Java-only portal. Also the Java only portal logon page would have to redirect to the other portal after successfull login.
It would require a great deal of programming in order for the users to be able to work in one portal and be redirected to the other portal and back only for authentication.
The solution of federated portals seams more feasible.
Regards,
Eleni -
Using different templates for the desktop and phone versions of the same blog
I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit -
Setting mail with Cox (or other services with different servers for pop and smtp)
My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier -
Hoe top create summary and detail report using ABAP QUERY
Hi ,
Can any one suggest me how to create summary and detailed report using ABAP Quey.
Regards,
Raghu.Hi,
Table Declaration
tables:mara,mast.
*Declaring the internal table
data: begin of itab_new occurs 0,
matnr like mara-matnr, "Material No
ernam like mara-ernam, "Material Created by
mtart like mara-mtart, "Material Type
matkl like mara-matkl, "Material Desc
werks like mast-werks, "Plant
aenam like mast-aenam, "BOM created
stlal like mast-stlal, "Alternative BOM
end of itab_new.
select-options: p_matnr for mara-matnr.
CODE A : Retrieving the data from the database
select f~matnr f~ernam f~mtart f~matkl m~werks m~aenam m~stlal
into table itab_new
from mara as f inner join mast as m
on f~matnr = m~matnr
where f~matnr in p_matnr.
CODE B : Retrieving the data from the database.
SELECT FMATNR FERNAM FMTART FMATKL MWERKS MAENAM M~STLAL
INTO TABLE ITAB_NEW
FROM MARA AS F INNER JOIN MAST AS M
ON FMATNR = MMATNR
WHERE F~MATNR = P_MATNR.
SORT ITAB_NEW BY ERNAM.
loop at itab_new.
write:/5 itab_new-matnr,itab_new-ernam,itab_new-mtart,itab_new-matkl,itab_new-werks,itab_new-aenam,itab_new-stlal.
endloop.
*TABLES: MARA , MAST.
*DATA:BEGIN OF ITAB_NEW OCCURS 0,
MATNR LIKE MARA-MATNR,
ERNAM LIKE MARA-ERNAM,
MTART LIKE MARA-MTART,
MATKL LIKE MARA-MATKL,
END OF ITAB_NEW.
SELECT MATNR ERNAM MTART MATKL
INTO TABLE ITAB_NEW
FROM MARA
WHERE MTART = 'T'
ORDER BY MATNR ERNAM MTART MATKL.
*DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
END OF ITAB.
Thank U,
Jay.... -
my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?
my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?
-
In the next ios update, could we get the fingerprint function to unlock the phone and open up different apps in one swipe, using different fingers for different apps?
This is primarily a user-to-user support forum. Following is a link for feedback/suggestions to Apple: http://www.apple.com/feedback/
-
I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem
grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR -
my ipod wont charge and i have used different chargers for it is it possible to reset it while its dead?
I do not know what you mean by charger. Cable?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How do I use different Layouts?
I am trying to make a program that runs in a window like this:
http://www.exyt-web.com/Window.gif
The problem I'm having is with the layout.
How do I have more than one layout ?
For example - as you can see in the image (hyperlink above) I wish to have a border layout with a JFrame at the North position and then in the South position I want to have buttons laid out in a FlowLayout.
Also with my radio buttons I want these in a GridLayout(3, 0) layout.
I made up some example code to test using different layouts - but it seems one layout always overrides the other...
import java.awt.*;
import javax.swing.JFrame;
import javax.swing.JLabel;
public class LayoutTest extends JFrame
public LayoutTest()
setTitle("Hello World");
Container contents = getContentPane();
Container contents2 = getContentPane();
contents.setLayout(new FlowLayout());
contents.add(new JLabel("<FILTER [Type a th| ]>"));
contents.add(contents2);
contents.add(new JLabel("< Filter Button >"));
contents.add(new JLabel("< Add Button >"));
contents2.setLayout(new GridLayout());
contents2.add(new JLabel("< Button 1 >"));
contents2.add(new JLabel("< Button 2 >"));
contents2.add(new JLabel("< Button 3 >"));
contents2.add(new JLabel("< Button 4 >"));
setDefaultCloseOperation(EXIT_ON_CLOSE);
pack();
} // HelloWorld
public static void main(String [] args)
LayoutTest theLayoutTest = new LayoutTest();
theLayoutTest.show();
} // main
} // class HelloWorldI know this obviously doesn't work but I hoped it would show what I was trying to do.
I also tried creating a new 'contents2' and then adding it into 'contents'
e.g. contents.add(contents2); My current code for the window I'm trying to create so far is:
import java.awt.*;
import javax.swing.*;
public class Menus extends JFrame
public static void Menus()
// Creates a new JFrame, with the title specified in quotation marks.
JFrame frame = new JFrame("Film Database");
// Sets the default close operation of the frame.
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Creates a new menu bar for the frame.
JMenuBar menuBar = new JMenuBar();
// Creates a new menu for the menu bar.
JMenu menu = new JMenu("File");
addFrameContents(frame, menuBar, menu);
// Sets the new menu bar on the frame
frame.setJMenuBar(menuBar);
frame.pack();
frame.setVisible(true);
} // HelloWorld
public static void addFrameContents(JFrame frame, JMenuBar menuBar, JMenu menu)
// Adds the menu to the menu bar.
menuBar.add(menu);
// Creates a new item for the menu with a small icon.
JMenuItem menuLoad = new JMenuItem("Load", new ImageIcon("C:/load.gif"));
// Adds the new item to the menu.
menu.add(menuLoad);
JMenuItem menuSave = new JMenuItem("Save", new ImageIcon("C:/save.gif"));
menu.add(menuSave);
JMenuItem menuQuit = new JMenuItem("Quit", new ImageIcon("C:/quit.gif"));
menu.add(menuQuit);
// Creates a new container.
Container contents = frame.getContentPane();
// Sets a new layout for contents, in this case FlowLayout.
contents.setLayout(new GridLayout(2, 0));
// Adds new JLabels to the container.
contents.add(new JLabel("< JLabel 1 >"));
contents.add(new JLabel("< JLabel 2 >"));
contents.add(new JLabel("< JLabel 3 >"));
contents.add(new JLabel("< JLabel 4 >"));
JLabel thisLabel = new JLabel("Hello");
thisLabel.setLayout(new FlowLayout());
JLabel thisLabel2 = new JLabel("Hello2");
thisLabel2.setLayout(new FlowLayout());
contents.add(thisLabel);
contents.add(thisLabel2);
public static void main(String [] args)
Menus();
} // main
} // class HelloWorldAny help on how I can use two separate layouts in the same frame would be great!
Regards,
Tomdoing this:
Container contents = getContentPane();
Container contents2 = getContentPane();
does not create 2 different containers. It's just creating 2 variables that refer to the same container. There is only 1 content pane in a window/frame. A container can only have 1 layout.
If you want to have 2 layouts, you create 2 panels with separate layouts and put what you want in each panel, and put both panels in the content page. -
Use one account for apps and other for itunes match
Hello everybody
My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
Thank you in advanceI would strongly recommend you not do this. You will regret it.
I have played with this issue a lot. You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there. You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again. This really is not what you want to do.
Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music. You don't want to go though the other process.
Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
all store purchases on an iphone are linked to the store id. if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app. You can't have two store id's signed into your iphone at the same time. They are all linked together. -
Different layouts for different pages
hi all,
i have created a form in which there are 5 output pages but the print preview shows only the first page out of 5.i want to go to the next page.plz help how would i do that.and i want different layouts for different pages.
thnks n regards,
mukesh.Hi Mukesh,
Read these lines which has been given in help.sap.com and also go through the link given below.
Main Window on Several Draft Pages :
if you want the pages on which a table with items is printed to have different layouts. Height and position of the main window may differ on the different pages, but the width must remain the same throughout.
[Main Window|http://help.sap.com/saphelp_nw70/helpdata/en/b1/243fdabeee11d4b633006094192fe3/content.htm]
Regards,
Sravanthi -
I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play.
Does anyone know how I can make this work?Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred
Maybe you are looking for
-
Problem writing object to file
Hi everyone, I am creating an index by processing text files. No of files are 15000 and index is a B+ Tree. when all files processed and i tried to write it to the file it gives me these errors. 15000 files processed. writing to disk... Exception in
-
Install OS X on new Hard Drive
I am planning to upgrade my macbook's 60gb hard drive to 120gb. My question is, How do I install OS X on the new hard drive? Please advise. Thanks.
-
Oracle.integration.platform.blocks.sdox.WLSSDODynamicStubHelper
Hi All, I have developed an ADF-BC Service and created service interface in it. And trying to deploy in Admin server but getting the following error: [01:44:28 PM] Weblogic Server Exception: weblogic.application.WrappedDeploymentException: oracle.int
-
Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these to fail? Alert subscription data source module e
-
Drop Frame/Non-Drop Frame Warning
Hi, First off, thank you to the experienced people out there who take the time to explain things and answer these questions. About the following warning: Warning: You are about to capture drop-frame media to a non-drop frame clip. If you proceed, you