Layout mode in Dreamweaver CS3. Can't draw table
I did the same exact thing i do in dreamweaver 8, but in cs3,
it's now working.
I went to layout mode and with a blank page and the draw
table button is grayed out.
what do i do to use it. I'm already in layout mode.
Get out of Layout mode for starters.
In my opinion, there are three serious problems with Layout
Mode -
1. Perhaps most importantly, it sits between you and *real*
HTML tables,
and fools you into believing that concepts like "layout cell"
and
"autostretch" really mean something. They do not. As long as
you use
Layout Mode, you'll never learn one of the most important
things for new web
developers - how to build solid and reliable tables.
2. Actually, #1 wouldn't be *so* bad, except that the code
that is written
by Layout Mode is really poor code. For example, a layout
table contains
MANY empty rows of cells. This can contribute to a table's
instability.
In addition, if your initial positioning of the table's cells
is a bit
complex,
Layout Mode will throw in col- and rowspans aplenty as it
merges and splits
cells willy-nillly to achieve the pixel-perfect layout you
have specified.
Again,
this is an extremely poor method for building stable tables,
because it
allows
changes in one tiny cell's shape (i.e, dimensions) to ripple
through the
rest
of the table, usually with unexpected and sometimes
disastrous consequences.
This is one of the primary reasons for the final result's
fragility - read
this -
http://apptools.com/rants/spans.php
3. The UI for Layout Mode is beyond confusing - many options
that you might
want to use are inaccessible, e.g., inserting another table,
or layer onto
the page.
I can understand the new user's desire to use this tool to
make their life
easier,
but the cost is just too heavy in my opinion.
To make good tables, keep it simple. Put a table on the page,
and begin to
load your content. If you would want a different table
layout, instead of
merging or splitting cells, consider stacking tables or
nesting simple
tables instead, respectively.
And above all, do not try to build the whole page with a
single table!
To read more about this approach, visit the DW FAQ link in my
sig, and run
through the table tutorials.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dreamweaver2k2" <[email protected]> wrote
in message
news:[email protected]...
>I did the same exact thing i do in dreamweaver 8, but in
cs3, it's now
>working.
> I went to layout mode and with a blank page and the draw
table button is
> grayed out.
>
> what do i do to use it. I'm already in layout mode.
>
Similar Messages
-
Help! Sometimes Dreamweaver CS3 can't see my .css file
Once a day or so dreamweaver cs3 can't see my .css file. So
all my files that I am working with turn to poop. To fix I have to
close each file and re-open. Then my .css returns and all my files
are how they should be. Anyone else ever have this problem?That I do not know - I've never looked. From the styles
panel, I do know that it does not completely disapear - it shows
the .css - just all the rules are missing. I will look next time.
Usually only happens when multiple files are open. Thanks -
Dreamweaver CS3 Can't Render My Fancy-Pants CSS
Hi everybody,
My company does CSS/XHTML design. I think we do pretty good
stuff— of course we're still learning, but we do OK. We're
currently in the midst of a site redesign for Haverford College,
and this time we're going all the way: pure CSS, tableless, XHTML
strict if we can manage it.
I have used DW MX 2004 since, um, 2003, and have had no
reason to upgrade. But now that we're doing pure CSS layouts, they
tend to show up wonky in MX 2004, so I'm planning to upgrade to
CS3. I am working with the trial version now, and I'll be damned if
the display of the site isn't WORSE than it is in MX 2004.
This wouldn't be a big deal, as I usually work in the code
anyway, but DW CS3 is about to be approved by the client as the
standard method of having administrators do site updates. This
means every admin at Haverford's going to open up their page, look
at this, go "oh, no, my site's b0rked," and try to fix it. Disaster
will ensue.
Here is the evidence.
The home page is browsable at
http://haverford.demo.babywhale.net/.
As you can see, it validates (transitional for now, as
there's some mockup content in there). It also looks consistent
across FF, Safari, and IE6 and 7. (We'll look at other browsers
later in the dev process.)
Now check out how horribly screwed up it looks in DW CS3:
http://www.whitewhale.net/screenshot/dw.png
http://www.whitewhale.net/screenshot/scroll_to_right.png
We are doing some sort-of-fancy float-based layout in there,
but man, if IE6 can read it, why can't Dreamweaver?
Can anyone offer any advice? I'm starting to sweat this one a
little. I figure my options are either (a) go back to a table,
which would cause at least one of my employees to quit in protest;
or (b) spend a lot of time tweaking the CSS so that it shows up
properly in DW, which would be the most annoying
browser-compatibility debug EVER; or (c) create a bunch of
DW-specific tools (like design-time stylesheets, and so forth)
meaning that the admins would have to do a lot of custom
configuration along with the DW CS3 install. Or (d) tell the client
we have to find another solution besides DW because of our fancy
layout, which they're certainly not going to be happy with.
OK, I've blabbed long enough. If anyone has any ideas,
similar experiences, or suggestions about which of the preceding 3
options I should go for, please let me know. Thanks!
JasonJason,
> I figure my options are either (a) go back to a table,
which would cause at
> least one of my employees to quit in protest; or (b)
spend a lot of time tweaking
> the CSS so that it shows up properly in DW, which would
be the most annoying
> browser-compatibility debug EVER; or (c) create a bunch
of DW-specific tools
> (like design-time stylesheets, and so forth) meaning
that the admins would have
> to do a lot of custom configuration along with the DW
CS3 install. Or (d) tell
> the client we have to find another solution besides DW
because of our fancy
> layout, which they're certainly not going to be happy
with.
Another option:
(e) Turn off CSS Style Rendering in DW Design View:
View > Style Rendering > Display Styles
Also available on a toolbar:
View > Toolbars > Style Rendering
This gives you a view of the semantic structure of your page
which is
fully editable.
Hope this helps,
Randy -
Dreamweaver CS3- Can't activate after reformat of hard drive
Hello
I had to reformat my hard drive due to a virus and made note of all my serial numbers.
I put Dreamweaver CS3 back on laptop with disc and it accepts my code but then I have to phone to activate it fully.
I then get a message on the phone telling me to go to adobe.com/go/activation, I can then do nothing there.
It tells me to click help in dreamweaver and activate from there but I can't get past an activation screen to get there.
Please help as I need to work on my website.
TIA IanI know CS2's server has been deactivated due to some unnamed "technical problem".
As for the OP, I would uninstall and run the cleaner tool then try again. The cleaner tool is available here: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
You "may" also benefit from trying the install this way, just make sure to follow ALL of the instructions...
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
Hi,
Dreamweaver creates a "Connections" folder in the site root
where all database connection files are stored. I want to move this
folder to another path but then DW can't find the connection (for
example in admin/includes/Connections).
How can I tell DW the new path of the "Connections" folder so
I can still use DW extensions to find all available database
connections?
Thanks!
Regards,
Checo_Checo_ wrote:
> How can I tell DW the new path of the "Connections"
folder so I can still use
> DW extensions to find all available database
connections?
Answered your duplicate post in the AppDev forum. Please
don't post
identical questions in multiple forum.s
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Hi, and thank you for reading this.
I've setup a production and test FTP servers in Dreamweaver CS3. It is either saves to production or test server when I click COMMAND+S (CONTROL on PC), but I'd like teh file to be saved on both simultaneously. Persssing Sync the Servers won't work since the servers are not mine and they a bit different, teh files are not the same. I just would like to be able to save 1 file at a time in both production and server with one click.
I've been searching the Interenet but could not find anything other than basic FTP setup. Any help would be appreaciated. Thanks!
AntonHi John, first of all thank you for replying!
The reason why I would like to have Dreamweaver to save to both servers Test and the Production at the same time is because it would save me a lot of time keeping both servers more or less in sync. I have to keep both Test and Production servers syncronized, but only wihtin a specific content. While I test my design I do use Test server, but then the hassle begins when I am asked to make changes to the content.
For example, I have a content page called books.html. I first built it on a Test server. Then switched to the tab called Remote, connect to the Remote Server, and save it. Very simple.
However, then I need to create 10 more pages, lets call them books1.html, books2.html, and so on. Again sync them with the Remote server.
All is great, but then my boss comes and say, hey there is a mistake on these files: books3, books4, books7, and books8. Please change the text content on those. So, I know the pages are working fine, I just need to update the text on both Test and Remote servers.
So at this point I have to open these 4 files, change the text, then SAVE ALL to Test server. Then, I switch to Remote tab, go back to files press any key and 'Delete' keys so that Dreamweaver would see the change in file so that it would be able to save it. Then again 'SAVE ALL' to the Remote server.
This is happening very OFTEN. It would save me so much time and brain power remembering which files I should sync if I am in a hurry and jump from one project to another, losing track of small changes in files when there are a lot of .html files.
CMS is only in development now so I have to work with what I got. As to regard to backups, I use Time Machine so I am set with that. Plus I use MAMP. So basically I first use MAMP for testing, then upload changes to the Test server with all the BIG databases, and only then to Remote (production) with real Database. However, this is only when I develop new pages, very often I just need to modify what's already has been created. So that's why a feature like Save to BOTH servers (Test and Remote) would make a big difference to me.
- Nookeen
http://nookeen.com -
Dreamweaver CS3- can not paste from Word into Design mode window
Have been away from DW for a while, and upon return having a
bit of difficulty with paste function for text. I can select text
in design mode/window; I can type in design mode, but I can not
paste into design mode. I can only paste in code view or the code
half of split view. Is there a setting/preference I have set wrong?
Thxhttp://www.adobe.com/cfusion/knowledgebase/index.cfm?id=dd550772
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"[email protected]" <[email protected]>
wrote in message
news:gfsk14$htv$[email protected]..
> File>Import> Word Document is not an option I am
offered. Also, I'm not
> really
> interested in importing a whole Word doc, just a line of
text or so. I
> think a
> cut and paste from Word to DW ought to work?
> -
Dreamweaver CS3 can't see recordset statement
I have a recordset declaration in my asp file and needed to
make changes. Now Dreamweaver says that there is no recordset but I
can see it in the code. What's up with this. I can't find a way to
fix it.
Thankstkurshin wrote:
> Well, that can be done but what is the problem with
Dreamweaver.
>
> Seems to me that this is a bug.
Not really. What dreamweaver does is write code in a file in
the
correct palce with all of the common augments & stuff.
Then when you
want to change something it looks for stuff formatted a
certain way.
When it is not formatted a certain way, you are on your own.
While a little agravating dreamweaver does a whole bunch of
stuff that
other people wrtie the code from line 1. -
Dreamweaver CS4 - Can't see table cells and borders
Hello you all. I just started using CS4 and whenever there is a white background I can't see any of the table cell or main borders.
I went to View>Visual Aids>Table Borders and it is on, but I can't seem to find the area I need to change the color to view it on white.I just remember the previous versions would allow you to change the dotted line color that indicated the table and cell borders.
Must say I can't ever remember that being a preference in any previous version of DW.
Sadly, it looks like I will be using tables to set up my site. Haven't adopted CSS as much as I'd like at this point.
Now's as good a time as any to start with CSS from the ground up.
Try one of the pre-made templates in DW under File > New -
Drawing AP Divs..In Dreamweaver CS3..
Hi,
Dreamweaver CS3 Question
Ive been trying to draw ap divs on my website and i've been having trouble.
My main issue is when i draw the ap div it disappears after i take my finger off the mouse.
there is no box nor selection handle left in my window.
I've tried going through the preferences and viewing options, but nothing works.
Is there a way to set my preferences back to default?
any suggestions would be greatly appreciatedon a blank page in layout mode,
Thank you. You cannot draw a/p divs in Layout mode. You shouldn't even be in Layout mode anyhow.
In my opinion, there are three serious problems with Layout Mode -
1. Perhaps most importantly, it sits between you and *real* HTML tables,
and fools you into believing that concepts like "layout cell" and
"autostretch" really mean something. They do not. As long as you use
Layout Mode, you'll never learn one of the most important things for new web
developers - how to build solid and reliable tables.
2. Actually, #1 wouldn't be *so* bad, except that the code that is written
by Layout Mode is really poor code. For example, a layout table contains
MANY empty rows of cells. This can contribute to a table's instability.
In addition, if your initial positioning of the table's cells is a bit complex,
Layout Mode will throw in col- and rowspans aplenty as it merges and splits
cells willy-nillly to achieve the pixel-perfect layout you have specified. Again,
this is an extremely poor method for building stable tables, because it allows
changes in one tiny cell's shape (i.e, dimensions) to ripple through the rest
of the table, usually with unexpected and sometimes disastrous consequences.
This is one of the primary reasons for the final result's fragility - read this -
http://apptools.com/rants/spans.php
3. The UI for Layout Mode is beyond confusing - many options that you might
want to use are inaccessible, e.g., inserting another table, or layer onto the page.
I can understand the new user's desire to use this tool to make their life easier,
but the cost is just too heavy in my opinion. Adobe agrees. Layout mode is gone forever beginning with CS4.
To make good tables, keep it simple. Put a table on the page, and begin to
load your content. If you would want a different table layout, instead of
merging or splitting cells, consider stacking tables or nesting simple
tables instead, respectively.
And above all, do not try to build the whole page with a single table! -
from prior threads i've seen that the PiP mode in WebCamera was given up on, and i can only seem to set side by side layout mode anyway.
is PiP mode going to be available in the spark version of LCCS? if not, can one the of developers let me know how i would go about subclassing WebCamera to ensure that the publisher's video is not added to the WebCamera layout? i've tried a few things, such as setting sbsSubscriber.webcamPublisher = null, and removing the publisher's video forcefully from the display list, but it still seems to appear.
or any tips on how i would go about allowing PiP mode to be set in WebCamera so that i can then muck about with the layout of the publisher's video manually.
thanks
adam>>Can somebody please tell me what I'm doing wrong?
Using Layout mode. Seriously!
Adobe removed Layout Mode from CS4 version of DW with good
reason. This has
been explained here dozens of times. Search here:
http://groups.google.com/advanced_search?q=+group:macromedia.dreamweaver
on
"layout mode" for more info.
Walt
"kensteve" <[email protected]> wrote in
message
news:gfg6ri$ekl$[email protected]..
> In layout mode using Dreamweaver 8, I created a percent
based table. Into
> that
> I inserted a pixel based table. Into that I inserted
cells to hold the top
> banner, navigation, etc. Previewed in browser and all
looked good. Then I
> added
> two column cells beneath my navigation. Added text to
both cells and
> styled
> with CSS. Previewed in browser, and again all looks
well. Now I'm trying
> to
> close off the bottom by running one cell beneath the
above two columns,
> but
> even though the cells are tightly aligned, I get a space
of about 1 inch
> between the columns and the bottom row I have created. I
even tried
> re-creating
> everything using nested tables instead of cells, and I
can't get rid of
> this 1
> inch space. I don't have any cell or table padding added
anywhere. I'm
> pulling
> my hair out ... been at this all day! Can somebody
please tell me what I'm
> doing wrong? Many thanks in advance.
>
> -
Dreamweaver cs3 deactivation/activation problem
I am trying to deactivate Dreamweaver CS3 on my windows pc and it is not working. I have tried to activate it on my laptop but am having no success with that either. My Dreamweaver CS3 serial number is
<Edited by moderator>
Please can someone help with this problem ?
Regards,
Lynne GoddardBroadcasting your serial number to the entire internet probably isn't going to help things in the activation department.
Can a moderator delete that?
See if anything here helps: Re: Dreamweaver CS3- Can't activate after reformat of hard drive
If not, go here: Contact Customer Care
Choose Adobe Dreamweaver
Choose How To's and Troubleshooting
Choose Troubleshoot
Click the Still Need Help button to get a phone number or direct chat with adobe support. -
Dreamweaver CS3 frameset browse problem
When I click to preview in a browser for a .CFM file which
contains a frameset, Dreamweaver opens the browser with the
PHYSICAL path (eg. C:\CFusionMX7\wwwroot\mysite\frameset.cfm) and
so all that is displayed in the browser is markup. On the other
hand, if I click to preview in a browser for any other .CFM file,
Dreamweaver correctly opens the page using the web url (eg.
http://localhost:8501/mysite/test.cfm)
and so the page is parsed properly.
Also, If I click the "Live Data Viewer" button on the
frameset page, then I get a message:
The testing server did not execute any of the scripts in your
document. Possible explanations: Testing server is not running.
Testing server ignores .cfm files.
That message only occurs on the frameset page. Other .CFM
pages display correctly in the Live Data Viewer.Broadcasting your serial number to the entire internet probably isn't going to help things in the activation department.
Can a moderator delete that?
See if anything here helps: Re: Dreamweaver CS3- Can't activate after reformat of hard drive
If not, go here: Contact Customer Care
Choose Adobe Dreamweaver
Choose How To's and Troubleshooting
Choose Troubleshoot
Click the Still Need Help button to get a phone number or direct chat with adobe support. -
Dreamweaver CS3 Layout Mode Cell Paddig
Working in Layout Mode.
Create two cells of different width, fixed size.
Insert text in both, fonts are different.
Place one cell above the other.
Always too much space between adjacent cells even though the cell layout lnes are touching.
It seems as if the cells have a default padding value for text? This is never a problem when the cell content is an image.
Thanks,Don't use Layout Mode. It wreaks havoc to table code. Thank goodness Adobe removed Table Layout Mode from CS4.
Use Standard Table Mode and Design View or Split View.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Dreamweaver CS3 - layout tables and cells
I just installed the new Studio CS3 on my Mac , and I have
been trying to layout a new html page in Dreamweaver. I can draw
tables, but not cells! I check the Dreamveaver CS3 help "About
Layout Mode" thinking that this may be one of the functions that
have changed in the new version, but apparently it has not. Also, I
can not resize the div tags by draging the edges.
Can anyone help me with some advise?
Thank you.tfraga wrote:
> Can anyone help me with some advise?
Layout Mode has been removed from the Insert bar because it
produces
such poor quality code. The best advice to you is to learn
the basics of
HTML and CSS. You'll then find Dreamweaver a lot easier to
use.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Maybe you are looking for
-
FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls.
FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls. This is the error message I receive when I try to add my phone to my Mac for proximity / FaceTime audio calling. This feature worked until I changed my Apple ID
-
Problem with checkbox group in row popin of table.
In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n. if there
-
Gents I'm thinking of getting an ATV and I'm wondering if it is capable of creating a WiFi network? Currently my modem plugs into an AX (via ethernet switch) which creates my home WiFi. The AX has optical out to AV receiver. As I effectively won't ne
-
Need script to handle event on button.
Hi All, I need to handle some event on Button click. My requirement is quite simple. There is a DropDown List in PDF and a button. Depending the value selected by the user in DropDownList i want to display relevent blocks(Subforms) in PDF on
-
I would just like to thank those who have left comments re setting up airport extreme. I couldn't understand what I was doing wrong - but I now sit here unconnected to any cables but to the internet!!!!!!!!