Layout problem with JTabbedPane

Hi,
I'm creating a JDialog with a JOptionPane in it which has a JTabbedPane as its ContentPane
Supposed to look like the pic below. I've put the JOptionPane into a JScrollPane in case the user makes the Dialog too small.
Problem is that the JTabbedPane stretches to a very large height (way bigger than the dialog height).
Using setPreferredSIze(..) on the JTabbedPane doesn't help either. If the dialog is made bigger, then the TAbbedPane doesn't stretch, if it is made smaller, the TabbedPane shrinks to the minimum necessary size.
Any ideas, tips on getting this layout would be appreciated.
|                                      |/\|
| ----- -----                         |--|
| |   | |   |                         | |
| ----------------------------------- | |
| |                                 | | |
| | 2 Tables and several buttons   | |__|
| | on this JTabbedPane using      | | |
| | GridBagLayout                  | |__|
| |                                 | | |
| ----------------------------------- | |
|                                      | |
|          | OK | | Cancel |           |--|
|                                      |\/|
-------------------------------------------

Check this: http://forum.java.sun.com/thread.jsp?forum=57&thread=293587
- ananth
Hi,
I'm creating a JDialog with a JOptionPane in it which
has a JTabbedPane as its ContentPane
Supposed to look like the pic below. I've put the
JOptionPane into a JScrollPane in case the user makes
the Dialog too small.
Problem is that the JTabbedPane stretches to a very
large height (way bigger than the dialog height).
Using setPreferredSIze(..) on the JTabbedPane doesn't
help either. If the dialog is made bigger, then the
TAbbedPane doesn't stretch, if it is made smaller, the
TabbedPane shrinks to the minimum necessary size.
Any ideas, tips on getting this layout would be
appreciated.
|                                      |/\|
| ----- -----                         |--|
| |   | |   |                         | |
| ----------------------------------- | |
| |                                 | | |
| | 2 Tables and several buttons   | |__|
| | on this JTabbedPane using      | | |
| | GridBagLayout                  | |__|
| |                                 | | |
| ----------------------------------- | |
|                                      | |
|          | OK | | Cancel |           |--|
|                                      |\/|

Similar Messages

Page Layout Problems with embedded iViews

Hi all,
We are having problems with the position of the iviews in the layout page using embedded iviews. Sometime load in one order and other times in another one. I need that the iviews load in the same order always.
Any idea, please?
Thanks for all.

Hi José,
if in fact this is the case, then I would expect that the single iViews are called via different threads. If this is the case, then I would implement within the iView to wait for some result provided by the iView, which should be loaded first (for example, by putting some certain value into the http session object).
For deeper discussions on this topic see and
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

HT4111 Logitech K810 UK layout problem with @ and " being the wrong way round.

I have tried this keyboard on Windows 7 devices and they work just fine, but on IOS7, either the first version or the version released today, it remains the wrong way around - i.e. US spec.

Hi,
I have a problem with the same keyboard when I start up and hold the ALT key you can select a startup disk this is not working by my keyboard when I use a old keyboard I'ts working again do you have that problem also.
Best regards Garry

Printing layout problem with Lightroom CC 2015 Release

Hello,
I am working with the following configuration :
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015 Release
EPSON Stylus Pro 3880
I tried to print two images on a Super A3 paper sheet with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for better visibility on the forum):
This is the preview I have in the printing module of Lightroom and this is also what I have when I print to a JPEG file with Lightroom.
Sadly, after I launched the printing job, this is what came out of the printer:
As we can see, the layout of the two pictures has been shifted toward the top of the paper sheet (cropping the top of the first image in the process) and about 30% of the right part of the layout has not been printed.
Do you have any idea of what I am doing wrong here?
For your information, I do not print very often so I am not 100% sure that I set everything correctly. However, I have been successfully printing in the past and it was with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Yosemite Version 10.10.1 and with Lightroom 5.x (I cannot remember exactly which version).
Moreover, because my print was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it was a success. So I doubt that my initial settings on my MacBook Pro were wrong although I am not 100% sure.

I am in France and I found out that EPSON is providing at least two different files for its v9.33 driver that relate to the Stylus Pro 3880 with OSX:
epson16738.dmg: US version (https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=141552&prodoid =63085147&infoType=Downloads&d…)
epson379436eu.dmg: French version (Support et téléchargements - Epson Stylus Pro 3880 - Epson)
and I realize that I was using the US driver which.
After few minutes of refection, I realized that the 3880 driver that I installed on my MacBook pro was the only piece that was present when my prints failed and absent when my prints succeeded. So I though it had found out the cause of my problems until I tried with the french driver (epson379436eu.dmg)...
In the meantime Adobe has release of new version of lightroom so let me recap my new configuration:
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015.0.1 [ 1018573 ] (info available in Help menu > System info > Lightroom version)
EPSON Stylus Pro 3880
Epson driver v9.33 epson379436eu.dmg
... and the result of my test is ... nothing at all! Lightroom sends the the print job to the printer but nothing comes out of it.
However, when I printed to a file from lightroom and then tried to print this file with OS X Preview on the Epson 3880, it worked perfectly.
It also worked when I printed from Photoshop CC (2014.2.2).
It also worked when I printed from Lightroom but with a different printed and driver (Canon MF8580Cdw).
Therefore, among the five elements of my configuration cited above, there is none for which the printing job is always failing. It is hard to find out what is the faulty piece of software!

UiXml: layout problem with detailDisclosure

I'm trying to create a table, the detail-section of which contains a number of text elements the text elements themselves are databound - using <contents data:childData...>
However whenever I open the detailsection the layout of the table is screwed up. The column containing the Hide/Show button is then suddenly as wide as the detailsection.
When I don't use a tableLayout inside the detail section but e.g. a contentContainer it works fine.
Any idea what the problem might be?
Guido
<table formSubmitted="true" partialRenderMode="self"
name="/transactionStatus/message"
data:tableData="/rows@fti:transtat" data:detailDisclosure="/rows/row/detail@fti:transtat">
<columnHeaderStamp>
<prompt data:prompt="text"/>
</columnHeaderStamp>
<columnHeaderData>
<col text="Application"/>
<col text="Short Text"/>
<col text="Long Text"/>
</columnHeaderData>
<detail>
<tableLayout width="90%" hAlign="right">
<contents data:childData="subChildren">
<rowLayout>
<contents>
<header data:text="$name"/>
<styledText styleClass="OraPromptText" data:text="."/>
</contents>
</rowLayout>
</contents>
</tableLayout>
</detail>
<contents>
<text data:text="./shortText"/>
<text data:text="./longText"/>
</contents>
</table>

Hi Guido
I've not had any problems using <tableLayout> with the <detail> section of a <table> although I'm tending to use encapsulated <column> elements to control my table contents. I tried to simulate your example in my environment and couldn't reproduce the problem although it was difficult to replicate the data-bindings.
On that front, I was intrigued by your data-binding syntax, specifically the use of "/" and "." in there as this wasn't a feature I've come across. Can you tell me what this means?
Sorry I couldn't help more with your problem.
Cheers
Ian

Layout problem with div. on PC but ok on iPad how to fix?

hello. like the title says, im having a problem here. i im builiding my own website and am creating a page with all my personal exp. and so on. to keep it nice i created serveral div tags. here is my site:
http://www.eduweb.hhs.nl/~10071717/home.htm
when you go to the "CV" link in the left colum you will see the layout is ok, vertically. but there is way to much space between the created table (div tags)
on dreamweaver "live view" it shows fine with one line of space between the bottom of the table and the top of the text (trying to be as clear as possible).
but when i press Ctrl+F12 (prev in browser) it show like it is now.
on my iPad it shows just fine:
you know what i mean now?
here are my html codes(made them red to be clear):
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Curriculum Vitae</title>
<link href="css/main.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="wrapper">
<div id="banner">
    <p>Content for id "wrapper"</p>
</div>
<div id="navigation">
    <ul>
      <li><a href="home.htm">home</a>    </li>
    </ul>
    <ul>
      <li><a href="bouwkunde.htm">bouwkunde</a></li>
      <li><a href="cv.htm">CV</a></li>
      <li><a href="werkervaringen.htm">werkervaringen</a></li>
      <li><a href="mijn_werk.htm">mijn werk</a></li>
      <li><a href="contact.htm">contact</a></li>
    </ul>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
</div>
<div id="main">
    <h2>Curriculum Vitae</h2>
    <p> </p>
    <h6>Persoonlijk</h6>
    <div id="CvPersoonlijkL">
      <p>naam</p>
      <p>voornaam</p>
      <p>adres</p>
      <p> </p>
      <p>geboortedatum</p>
      <p>geboorteplaats</p>
      <p>telefoon</p>
      <p>mobiele nummer</p>
      <p>E-mail adres</p>
      <p>Nationaliteit</p>
      <p>Sofinummer</p>
    </div>
    <div id="CvPersoonlijkR">
      <p>kamp</p>
      <p>boris</p>
      <p>Zwartendijk 31</p>
      <p>2671LL, Naaldwijk</p>
      <p>18-03-1991</p>
      <p>Monster, Zuid-holland</p>
      <p>0174-670671</p>
<p>06-55718742</p>
      <p><a href="mailto:[email protected]?subject=Betreft Digitaal Portfolio">[email protected]</a></p>
      <p>nederlander</p>
      <p>205270621</p>
    </div>
    <p> </p>
    <p> </p>
    <p> </p>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6> </h6>
    <h6>opleidingen</h6>
    <div id="CvOpleidingenL">
      <p>MBO bouwkunde</p>
      <ul>
        <li>school:</li>
        <li>naam richting:</li>
        <li>periode:</li>
      </ul>
      <p> </p>
      <p>HAVO</p>
      <ul>
        <li>school</li>
      </ul>
      <ul>
        <li>periode</li>
      </ul>
    </div>
    <div id="CvOpleidingR">
      <p> </p>
      <p>mondriaan techniek & ICT den haag</p>
      <p>vormgeving ontwerp En architectuur</p>
      <p>2006-2010</p>
      <p> </p>
      <p> </p>
      <p>ISW, tiendweg, Naaldwijk </p>
      <p>2003-2006</p>
</div>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
<h6>vaardigheden</h6>
<div id="CvVaardighedenL">
<ul>
        <li>Autodesk AutoCAD 2D</li>
        <li>Autodesk AutoCad 3D</li>
        <li>Autodesk Revit </li>
        <li>Google SketchUp</li>
        <li>BouwCalc Voorcalculatie</li>
        <li>PlanCalc Windows</li>
        <li>Microsoft Word</li>
        <li>Microsoft Excel</li>
        <li>Microsoft PowerPoint</li>
        <li>PC zelf</li>
      </ul>
</div>
    <div id="CvVaardighedenM">
      <p>sterk</p>
      <p>goed</p>
      <p>matig</p>
      <p>sterk</p>
      <p>matig</p>
      <p>matig</p>
      <p>sterk</p>
      <p>sterk</p>
      <p>sterk</p>
      <p>sterk </p>
    </div>
    <div id="CvVaardighedenR">
      <p>2006-heden</p>
      <p>2008-heden</p>
      <p>2009-2010</p>
      <p>2006-heden</p>
      <p>2008-2010</p>
      <p>2008-2010</p>
      <p>2003-heden</p>
      <p>2003-heden</p>
      <p>2003-heden </p>
      <p>2003-heden</p>
    </div>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
<h6>overige informatie</h6>
    <div id="CvOverigL">
      <p>rijbewijs:</p>
    </div>
    <div id="CvOverigR">Ja, rijbewijs B sinds juli 2009</div>
</div>
</div>
</body>
</html>
i hope someone can solve this problem........... its really strange.
thanks!!
Boris

After the end of each section of your CV you have code like below before the start of your next section/s:
<p> </p>
<p> </p>
<p> </p>
<h6> </h6><h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
<h6> </h6>
You need to delete all of that so the section/s end cleanly before the start of the next section as shown below:
<p>205270621</p>
    </div>

<h6>opleidingen</h6>
    <div id="CvOpleidingenL">
Then you need to add clear: both; and padding: 15px 0 7px 0; as shown below to the <h6> css:
h6 {
    font-family: "BankGothic Lt BT", georgia, "times New Roman";
    font-size: 12px;
    color: #000;
clear: both;
padding: 15px 0 7px 0;

JFrame.pack() causes problems with jtabbedpane(making new tabs)and resizing

I have a JFrame with a JTabbedPane inside of it. Inside of each tab I put a JPanel with a JTextArea in it. When I create a new tab, I do something like textArea.requestFocusInWindow();
However, this will not work unless I do a frame.pack() right after I created the new tab and right before that line of code.
This in turn causes another problem. If I resize the jframe and then create a new tab, the window will snap back to the size it had before creating the tab. I assume this has to do with the pack() function, however nothing else I try will make the cursor blink in the JTextArea.
Is there a solution to this...either something to make the cursor blink or something other than the pack function to update the JFrame?
Thank you

This posting should help you out:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=581478

Creating new Layout problem with merged table within std_resources.htm

Dear All,
i am relatively new to oracle ucm and i am trying to add new comonent to create new layout from oracle Create and Modify Layout Sample Component* example under http://www.oracle.com/technetwork/middleware/content-management/index-092832.html .
i want to ask about the following
in this component i have CreateLayout_Layouts Table, CreateLayout_PublishedWeblayoutFiles Table and CreateLayout_PublishedStaticFiles Table. These tables should be merged with LmLayouts table, PublishedWeblayoutFiles table and PublishedStaticFiles table respectively in the std_resources.htm file in the <install_dir>/shared/config/resources directory.
The problem is in my std_resources.htm file i have the following :
<tr>
     <td>LmLayouts</td><td>LmLayouts</td><td>LmLayouts</td><td>id</td><td>label</td>
     <td></td><td>7.3</td><td>1</td>
</tr>
how can i add (merge) the CreateLayout_Layouts Table in LmLayouts table? what is should fill the <td>s ?
for PublishedWeblayoutFiles table and PublishedStaticFiles table they are not exist in my std_resources.htm file. are there names changed? or shall i add them(if yes, what is the <td>s had inside).
note: i will be greatfull if someone have the std_resources.htm that have the above tables merged with the specified ones.

I believe that sample is old. i have been pushing to get an updated version out also. Hopefully the fragmentary information I will give here will help.
The main changes are dynamic data tables which replace the includes to control the menu items and relationships. The old things should work still but good to use the new. At the end is an example of merge rules.
See 3.5.2 Dynamic Data Tables
http://docs.oracle.com/cd/E21764_01/doc.1111/e10807/c03_components.htm
==============================
CoreMenuItemRelationships table example
<?commatable mergeKey="primaryKey" derivedColumns="primaryKey:parentId+id"?>
parentId,           id,                loadOrder
MY_CONTENT,      NEW_PAGE,                9000
================================
CoreMenuItems table example
<?commatable mergeKey="primaryKey" derivedColumns="primaryKey:parentId+id"?>
id,                label,                linkType,           linkData
NEW_PAGE,                    wwNewPage,                    cgi,                IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=NEW_PAGE
============================
CoreMenuItemsFlags table example
<?commatable indexedColumns="id"?>
id, flags
WORK_IN_PROGRESS, isSubAdmin
=======================
CoreMenuItemsImages table example
<?commatable indexedColumns="id"?>
id, image, imageOpen
ACTIVE_WORKFLOWS,      ReviewContent.gif,
Glue file example: (note I am not willing to upload a zip file of a full component sorry)
<?hda version="11gR1-dev" jcharset="UTF8" encoding="utf-8"?>
@Properties LocalData
ComponentName=NewLayout
blDateFormat=M/d/yyyy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAmerica/Chicago
hasPreferenceData=0
preventAdditionalComponentDowngrade=0
serverVersion=7.1
version=2011_11_13-dev
@end
@ResultSet ResourceDefinition
4
type
filename
tables
loadOrder
resource
resources/newlayout_resource.htm
null
10
template
templates/newlayout_template.hda
null
10
resource
resources/newlayout_strings.htm
null
10
@end
@ResultSet Filters
4
type
location
parameter
loadOrder
@end
@ResultSet MergeRules
4
fromTable
toTable
column
loadOrder
NewLayout_Layouts
LmLayouts
id
10
NewLayout_PublishedWeblayoutFiles
PublishedWeblayoutFiles
path
10
NewLayout_PublishedStaticFiles
PublishedStaticFiles
null
10
NewLayout_LayoutSkinPairs
LmLayoutSkinPairs
null
10
NewLayout_Templates
IntradocTemplates
name
10
@end
@ResultSet ClassAliases
3
classname
location
loadOrder
@end

Layout problem with broadcasted BW report

Hi all,
a broadcasted BW report laying under /documents/Public Documents/TestReport looks good when opening the index.htm there... also the layout.
Then I took an iView based on 'KM Document iView' (com.sap.km.cm.docs) and copied the path '/documents/Public%20Documents/TestReport/index.htm' into the property 'Path to Document'.
A preview of this page shows the data but the layout of this page is missing.
Viewing the source of this htm page shows the following stylesheet entry:
<link rel="stylesheet" type="text/css" href="./StaticMimes/com.sap.portal.design.urdesigndata/themes/portal/fwtheme/ur/ur_ie6.css">
So opening the index.htm in an iView can't find this stylesheet.
Have somebody an idea what to do? Do I have to configure something else?
We use NW2004s SP10. The report was made with the BEx Broadcaster Wizard.
Thanks,
Susanne

The IE 6.0 which I use can handle .mht files. So the .mht link opened in the KM Content works:
http://<host>:50000/irj/go/km/docs/documents/Public%20Documents/TestReport2.mht
But why does this link works but not the preview in portal content area?
I have to correct myself... I found out these effects trying to deposit different paths in the iView property:
- path: /documents/Public%20Documents/TestReport2.mht
--> the preview shows the source code of the .htm in the browser. Saving this source code to a new .mht file and testing it locally works fine!!!
- path: /entrypoints/Public%20Documents/TestReport2.mht
--> here the browser wants to know which programm the .htm file shall be opened. After choosing IE the source code was shown also like above.
Therfore there is the same behavior after assigning the iView to a role.
This url was generated for the iView
http://<host>:50000/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content/nas/general/nas_every_user_role/de.cas.nas.general_ws/testfolder/TestReport2&iview_mode=default
But also only the source code is shown in the browser.
I looked at this side how to integrate a BI report as a document into portal:
http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/7efa40dd14f06fe10000000a1550b0/frameset.htm
Do you have any other idea?
Regards, Susanne

Yet Another Key Layout Problem with Xorg7

I've read the wiki and forums, yet I haven't managed to get @-sign nor |-sign working with my finnish keyboard. Both need the compose key. Any pointers to relevant info or suggestions how to remedy this are most welcomed!
Here's my xorg.conf if it's any help:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/fonts/latin2/75dpi"
# FontPath "/usr/share/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
# Load "ddc" # ddc probing of monitor
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
Option "XkbOptions" "compose:ralt"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "MEI"
ModelName "MEI0c95"
HorizSync 30 - 70 # DDC-probed
VertRefresh 50 - 160 # DDC-probed
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Mode 0666
#EndSection

I tried if regenerating the file with xorgconfig would help. It didn't. I'm still missing AltGr functionality even if I do have:
Option "XkbOptions" ctrl:ctrl_aa,altwin:meta_win,compose:ralt,eurosign:e"
Any Ideas?
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
Option "XkbOptions" "ctrl:ctrl_aa,altwin:meta_win,compose:ralt,eurosign:e"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection

Keyboard Layout Problems with OS X Mavericks on MacBook

My brother and I have a Early 2009 MacBook that received succesive updates on OS X over the past four years: it went from Leopard to Snow Leopard to Lion to Mountain Lion. But this year, we decided to upgrade it from a clean install of Mavericks.
It went fine, but... the keyboard is acting in a terrible way. The layout is bugged! The left shift key enters the "Y" letter, while return enters the "/" key... I've just tried everything to fix this resetting NVRAM and SMC, but nothing has worked.
Somebody else is having this problem? Could a software update fix it?

See if a Safe Mode boot helps...
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.

Layout problem with smartform..Little Urgent

Hi gurus,
I have a window of size 1 cm.. In this i want to print a number which should be of the same size as the window(1 cm in height). But the maximum font i can give in the character format is 99 pt. and this is making the number to printed in less than half the area provided for it.
Please tell me how i can increase the font for the number so that it fits the window fully.
Thanks in Advance.
KK.

Hi,
you have given window size of 1 cm in that only the character font of less then 20 can be fitted I think you are giving the font size or the font family so that it takes default font of system so it is coming as so. In your system go to
-> Go to SE73 ->select system fonts and go with display.
-> Now check the font size and family that you are providing.
-> Now in the character format of the style provide the font family and size that is in the system fonts.
Thanks,
NN.

Non-US keyboard layout problem with VNC

Hi everyone,
I've got an arch box at work running tigervnc through an ssh tunnel so that I can work from home when I need to.
Everything is great, as long as I'm using and ASCII keyboard layout.
When I switch layouts, the keystrokes just don't get through to the server.
Here's what I use to switch layouts:
setxkbmap -layout us,ru -option 'grp:alt_shift_toggle'
So I need to type in russian, and I hit alt-shift, as usual, and start typing, but nothing is echoed back to me. I can tell that the keystrokes are just not getting to the destination because if I'm at a terminal and I'm switched to the ru layout and I type something and hit enter, I just get a newline, as if there was nothing typed at all.
Any ideas?

Hi,
Why are the characters mixed up in the session?
This issue can occur if the keyboard language has been switched on the remote PC while running a remote desktop session. In the case you would like to switch to a different keyboard
language follow these instructions.
Important:
The remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device,
you need to manually switch the keyboard language on the remote PC.
1. Open settings on your device.
2. Tap General and then tap International.
3. Tap Language and select the language running on the remote PC.
4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
Quote from
Remote Desktop Client on Mac: FAQ
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unicode font usage with jTabbedPane

Hey there
I faced a problem when I use Unicode characters on JTabbedPane
the font is amharic power geez unicode1 and it works fine with jLabel and partially with jButtons ( except trying to set text at run time )
The problem with jTabbedpane is that when I change its tab title property the other tabs disappear ( am using netbeans 5.5 )

To me, it looks as if your problem is that you're only calling setFont on "this".
That's only going to set it for the top level frame, and doesn't always do it for every individual component. The easy way to get around this is to go berserk with the setFont call. Set it on anything (heck, set it on your dog if it makes you feel any better)! ;D
The slightly harder but smarter way to do this is to write a recursive function that drills down your component list.
public void setFontRecursively(Font myFont, Component comp) {
   comp.setFont(myFont);
   if (comp instanceof Container) {
      Component[] childComps = ((Container)comp).getComponents();
      if (childComps != null) {
         for (int i=0; i < childComps.length; i++) {
            setFontRecursively(myFont, childComps);
That should basically cover anything bar popup menus and drop-down submenus. You have to recall this as they appear, or they don't get the font straight off.
Hope that helps!
Martin Hughes

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Layout problem with JTabbedPane

Similar Messages

Maybe you are looking for