LDAD Time Sync Error when creating user

Hi, we have a web service for eDirectory 8.8 SP5 that creates a few
users and does a couple other services. When the web service it
configured to connect to 1 of the 2 eDirectory servers (1 is a master,
and the other is read/write replica) then everything works just fine
(both server work just fine as long as you only connect to one of them
only). However, we tried to add redundancy by putting a load balancer
in front of the 2 eDir servers. When we use the VIP to make the LDAP
connection, we keep on getting this error when we try to create a user:
Caused by: LDAPException: Other (80) Other
LDAPException: Server Message: NDS error: time not synchronized (-659)
LDAPException: Matched DN:
at com.novell.ldap.LDAPResponse.getResultException(Un known Source)
at com.novell.ldap.LDAPResponse.chkResultCode(Unknown Source)
at com.novell.ldap.LDAPConnection.chkResultCode(Unkno wn Source)
at com.novell.ldap.LDAPConnection.modify(Unknown Source)
at com.novell.ldap.LDAPConnection.modify(Unknown Source)
I've ran ndsrepair -T and the time looks like it is synched and both
servers are running NTP. Do you know what could be causing this
problem? Also, it isn't the LB connection itself b/c everything works
fine if we disable one of the servers in the LB and still use the VIP
just to connect to just 1 server.
Thanks
Kalin35
Kalin35's Profile: http://forums.novell.com/member.php?userid=72672
View this thread: http://forums.novell.com/showthread.php?t=421486

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Can you tell us more about the changes taking place? For example, I
believe this can happen if you modify objectA on replica0 and then modify
objectA in another way on replica1. Timestamps on objects are made up of
the seconds since 1970 followed by a replica number (each replica's is
unique) and then an event number. As a result perhaps eDir feels time is
out of sync when it makes a change on a box and then the other replica
synchronizes in changes it received just a second earlier from your
application. It may be tricky to isolate if this is the case but it
should be possible with a bit of analysis. In the meantime you may want
to ensure your application (or your VIP) batches changes to one box and
then to the other as much as possible. The benefit of multi-master
replication (which eDirectory does by default) is you can write changes to
multiple boxes simultaneously, but the challenge is the same and requires
a way to resolve differences using transitive vectors which are made up of
those timestamps.
Good luck.
On 09/21/2010 04:06 PM, Kalin35 wrote:
>
> Hi, we have a web service for eDirectory 8.8 SP5 that creates a few
> users and does a couple other services. When the web service it
> configured to connect to 1 of the 2 eDirectory servers (1 is a master,
> and the other is read/write replica) then everything works just fine
> (both server work just fine as long as you only connect to one of them
> only). However, we tried to add redundancy by putting a load balancer
> in front of the 2 eDir servers. When we use the VIP to make the LDAP
> connection, we keep on getting this error when we try to create a user:
>
> Caused by: LDAPException: Other (80) Other
> LDAPException: Server Message: NDS error: time not synchronized (-659)
> LDAPException: Matched DN:
> at com.novell.ldap.LDAPResponse.getResultException(Un known Source)
> at com.novell.ldap.LDAPResponse.chkResultCode(Unknown Source)
> at com.novell.ldap.LDAPConnection.chkResultCode(Unkno wn Source)
> at com.novell.ldap.LDAPConnection.modify(Unknown Source)
> at com.novell.ldap.LDAPConnection.modify(Unknown Source)
>
>
> I've ran ndsrepair -T and the time looks like it is synched and both
> servers are running NTP. Do you know what could be causing this
> problem? Also, it isn't the LB connection itself b/c everything works
> fine if we disable one of the servers in the LB and still use the VIP
> just to connect to just 1 server.
>
> Thanks
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJMmTgcAAoJEF+XTK08PnB5F70QAI2FqxmouS Ljb2CZYOgEPE14
8sIKFJmskkQJBInS41vT0HOllbKzTQwVel99facLbr425piggC X6tN9r0U4Pnoil
0jBdjb/HX6qy1E1gcCQWlMLFNjKw7pG8kY+iT+lteAjrjU0h5uJB2JYoX 5KXaKQX
8GDCW38mXuWLX6x9WEwZ0WXMlU/Xbynjs8R1k9LY34pxK9Map2pADZKO8TT7V8Hs
zG7ZMmsMeos/3vgbc5sUmflGGpmivmhihp7RZE8ME5FvKRC1ximsaEqLrWNrpT 1H
IAnnBgG5vdcOcDDIiYKnTIj2JYMhb4JapxaNyQurIDgAbBQo1g yyWmYJlRfe+pQP
TjIQHRTVZQdy4Y98G2RisNbSwZMv8zC1buDDq1njCYS/OO/3rqo3/yL5bh2n/pjf
e6WMVAzsihd/csc9vOW7Z/9X0apKrckZUorhftdrEJCWOdnOXOx1MaZXhl0ppAKy
sdJU12wdFMUi32F79yjxrcriUq/Hh3w76vT9nVXUR9XuSIXR77uuWtvBt/qSNAqt
9IOL64jMHPw/AGyBTrvdp+Xz8MVkVzwXotctamACVmTeZ6bhFzPigfZ72zTQwH DV
QNF3Mql5hw1LdgwytgeIzbAuHYZdml2b2e+esU5DkEZNegpFYj gptZSAohzTCQMH
pY9I+p8g4ca4urXWtzpp
=AZgR
-----END PGP SIGNATURE-----

Similar Messages

  • Error when Create User Defined Field

    Hi all, i got an error when create UDF
    Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
    Here is part of my code
    oUserFieldMD.Name = fieldname
            oUserFieldMD.Description = fielddesc
            oUserFieldMD.Type = fieldtype
            oUserFieldMD.DefaultValue = defaultValue.ToString()
            If fieldtype <> SAPbobsCOM.BoFieldTypes.db_Date Then
                oUserFieldMD.Size = fieldlength
                oUserFieldMD.EditSize = fieldlength
            End If
            If fieldtype = SAPbobsCOM.BoFieldTypes.db_Float Then
                oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_Price
            Else
                oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_None
            End If
            oUserFieldMD.TableName = tablename
            lRetVal = oUserFieldMD.Add()
            prgbar.Value = prgbar.Value + 1
            If (lRetVal <> 0) Then
                msgs.Add(tablename & " - " & fieldname & " : " & oCompany.GetLastErrorDescription())
            Else
                msgs.Add(tablename & " - " & fieldname & " : successfully created!")
            End If
    the error come when reach lRetVal = oUserFieldMD.Add()
    what is wrong with my code ?
    thanks.

    This could be a x64/x86 problem. Try following this thread
    [GetCompanyService|GetCompanyService] and recompile your code for the platform you need.

  • 8i personal : error when Create user defined aggregate function

    Hi,
    I have problem on creating user defined aggregate function.
    I try to create the sample aggregate function "SecondMax" from 9i developer guide(append at the end of this post).
    It's work to create object type and the type body, but
    there is error when I create the aggregate function..
    "CREATE FUNCTION SecondMax (input NUMBER) RETURN NUMBER
    PARALLEL_ENABLE AGGREGATE USING SecondMaxImpl;"
    I am using 8i personal now.. is that the syntax of create function in 9i is different from that in 8i?
    Example: Creating and Using a User-Defined Aggregate
    This example illustrates creating a simple user-defined aggregate function SecondMax() that returns the second-largest value in a set of numbers.
    Creating SecondMax()
    Implement the type SecondMaxImpl to contain the ODCIAggregate routines.
    create type SecondMaxImpl as object
    max NUMBER, -- highest value seen so far
    secmax NUMBER, -- second highest value seen so far
    static function ODCIAggregateInitialize(sctx IN OUT SecondMaxImpl)
    return number,
    member function ODCIAggregateIterate(self IN OUT SecondMaxImpl,
    value IN number) return number,
    member function ODCIAggregateTerminate(self IN SecondMaxImpl,
    returnValue OUT number, flags IN number) return number,
    member function ODCIAggregateMerge(self IN OUT SecondMaxImpl,
    ctx2 IN SecondMaxImpl) return number
    Implement the type body for SecondMaxImpl.
    create or replace type body SecondMaxImpl is
    static function ODCIAggregateInitialize(sctx IN OUT SecondMaxImpl)
    return number is
    begin
    sctx := SecondMaxImpl(0, 0);
    return ODCIConst.Success;
    end;
    member function ODCIAggregateIterate(self IN OUT SecondMaxImpl, value IN number)
    return number is
    begin
    if value > self.max then
    self.secmax := self.max;
    self.max := value;
    elsif value > self.secmax then
    self.secmax := value;
    end if;
    return ODCIConst.Success;
    end;
    member function ODCIAggregateTerminate(self IN SecondMaxImpl, returnValue OUT
    number, flags IN number) return number is
    begin
    returnValue := self.secmax;
    return ODCIConst.Success;
    end;
    member function ODCIAggregateMerge(self IN OUT SecondMaxImpl, ctx2 IN
    SecondMaxImpl) return number is
    begin
    if ctx2.max > self.max then
    if ctx2.secmax > self.secmax then
    self.secmax := ctx2.secmax;
    else
    self.secmax := self.max;
    end if;
    self.max := ctx2.max;
    elsif ctx2.max > self.secmax then
    self.secmax := ctx2.max;
    end if;
    return ODCIConst.Success;
    end;
    end;
    Create the user-defined aggregate.
    CREATE FUNCTION SecondMax (input NUMBER) RETURN NUMBER
    PARALLEL_ENABLE AGGREGATE USING SecondMaxImpl;
    Using SecondMax()
    SELECT SecondMax(salary), department_id
    FROM employees
    GROUP BY department_id
    HAVING SecondMax(salary) > 9000;

    This could be a x64/x86 problem. Try following this thread
    [GetCompanyService|GetCompanyService] and recompile your code for the platform you need.

  • Sync error when creating translation of application

    When applying a translation file and publish the application we get the following error:
    ORA-20001: Sync error: WWV_FLOW_PAGE_PLUGS.PLUG_NAME ORA-01407: cannot update ("FLOWS_030000"."WWV_FLOW_PAGE_PLUGS"."PLUG_NAME") to NULL
    For another very simple test application in the same workspace I did not run into this problem.
    Any help will be really appreciated!!
    Thanks in advance, Maren

    There is section in ReadMe.txt :
    The following files MUST be installed prior to starting Oracle Transportation Management:
    1. Download the following file into a temporary directory: ...
    These instructions were not fully implemented.
    It was necessary to copy file jstl.jar into directory :
    $OTM/glog/gc3webapp/WEB-INF/lib/3rdparty
    After that, the above problem has been resolved.

  • Error when create user via OIM web

    Hi Gurus..
    I hava some problem when I creating new user via web OIM, error appear while inpute the start date value.
    Need help for you guys,
    This is the error code.
    <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #5
    java.lang.NullPointerException
        at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.handleAccountEndDateValidation(UserManagerValidationUtils.java:237)
        at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.processDateValidations(UserManagerValidationUtils.java:589)
        at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.processDateValidation(UserManagerValidationUtils.java:543)
        at oracle.iam.identitytaskflow.common.components.UIInputDate$DateValueValueChangeListener.processValueChange(UIInputDate.java:135)
        at javax.faces.event.ValueChangeEvent.processListener(ValueChangeEvent.java:134)
        at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:675)
        at org.apache.myfaces.trinidad.component.UIXEditableValue.broadcast(UIXEditableValue.java:210)
        at org.apache.myfaces.trinidad.component.UIXSelectInput.broadcast(UIXSelectInput.java:216)
        at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
        at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
        at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
        at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
        at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
        at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:902)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:357)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)

    probably yes but I am not so sure about that, I have checked the User.xml for make sure this but I can't found something wrong. any clue Shashank?
    Regards,
    -Rius-

  • Error when creating user defined TYPE

    Hi
    I have an object type created as follows
    create type emp_add is object(empno number(3),street varchar2(50),zipcode number(6));
    when I create a type based on the Object created above using
    create type add_rec is emp_add;
    I am getting compilation error
    SQL> sho err
    Errors for TYPE ADD_REC:
    LINE/COL ERROR
    1/17 PLS-00103: Encountered the symbol "EMP_ADD" when expecting one of
    the following:
    array VARRAY_ table object fixed varying opaque sparse
    How can I get rid of this error.I am a Beginner in Oracle database development.
    Thanks in advance

    Do this ->
    satyaki>
    satyaki>create type emp_add is object(empno number(3),street varchar2(50),zipcode number(6));
      2  /
    Type created.
    Elapsed: 00:00:07.77
    satyaki>
    satyaki>create or replace type add_rec as table of emp_add;
      2  /
    Type created.
    Elapsed: 00:00:00.96
    satyaki>
    satyaki>Regards.
    Satyaki De.

  • Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    in OIM 11g R2
    Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

  • Syntax error when creating a user-defined table type in SQL Server 2012

    Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
    CREATE TYPE ReportsTableType AS TABLE 
    ( reportId INT
    , questionId INT
    , questionOrder INT );
    Results:
    Msg 156, Level 15, State 1, Line 1
    Incorrect syntax near the keyword 'AS'.

    Hope these posts could help, 
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
    Regards, Dineshkumar,
    Please Mark as Answer if my post answers your question and
    Vote as Helpful if it helps you

  • Runtime Error when creating a new group

    I'm getting a runtime error when creating a new group on a site collection? 
    Thanks in advance

    The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
    In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
    Also Ensure the group name is not having any special/unsupported characters.
    Feel free to share the error screenshot/entry in the ULS logs.
    Please remember to click 'Mark as Answer' on the answer if it helps you
    Best Regards,
    Pavan Kumar Sapara
    s p kumar

  • Error when opening User and Group Preferences

    After upgrading to Lion there is an error when opening User and Group Preferences.
    I´ve repaired permissions but the problem is still there...
    Thanks...

    Hi,
    Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
    or
    Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
    Hope it helps,
    Reward points if helpful.
    Regards,
    Shailesh Nagar

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • Error when creating project for ESS

    I am getting the folowing error when creating a project in Dev Studio for the ESS leave application ess~lea. Pls help
    Failed to sync DC "sap.com/ess/lea(sap.com_SAP_ESS_1)" in configuration "JDI_XSSTrack_D". File "C:\Documents and Settings\User\.dtc\0\DCs\sap.com\ess\lea\_comp\.dcdef" does not exist locally after sync but it exists on the serve
    Regds
    Thirur

    Uninstalled and reinstalled the dev studio. Now it works.

  • ITunes shows time out error when trying to play on Airport Express.

    Time out error when trying to play on Airport Express. This started with an iTunes update, problems has to be with iTunes, Airport Express appears to be communicating fine, even shows when speakers are not connected.

    Same here, though on XP. Have tried cleaning registry, reinstalling, deleting preferences. Created a new user with no library and I have the problem there, too, so it's not the library.
    Is there no one to call about this??

  • Error while creating user for a  domain

    i am developing a web-application which is hosted on tomcat server.
    it is creating domains and users at another remote domain server.
    localy it is working fine..
    but when i test it online..
    the problem is,
    sometimes it works fine ,the domains are being creted at remote server..
    but sometimes it delivers error that domain at remote server can not be created.
    Is it due to fact that theat some errornous code in the buffer of application have older versions of applications causing the error ?
    Code::
    if(strPlanId.equalsIgnoreCase("3")) {
                    //Create domain account  for planid=3 plantype=Cp
                    blnOK=false;
    passwordGS comes from database
    strUrl="http://sosync.net/sosync/admin?pwd="+passwordGS+"&action=user_createdomain&domain="+strSubDomain+".gosync.net&adminpassword=aspire3002&diskquota="+longdk;  
                    u=new URL(strUrl);
                    uc=(HttpURLConnection)u.openConnection();
                    code=uc.getResponseCode();
                    if(code == 200) {
                        rUrl="/TransCompleteServlet";
                        blnOK=true;
                        uc.disconnect();
                    } else {
                        rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                    if(blnOK) {
                        String strUrlUser="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_createuser&username="+strEmailId+"&password="+strPassword+"&domain="+strSubDomain+".gosync.net&communityname=Default&firstname="+user.getFirstName()+"&lastname="+user.getLastName();
                       URL u1=new URL(strUrlUser);
                    HttpURLConnection   uc1=(HttpURLConnection)u1.openConnection();
                        code=uc1.getResponseCode();
                        response1=uc1.getResponseMessage();
                        if(code == 200) {
                            rUrl="/TransCompleteServlet";
                            String strUrlTZ="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_setuserpreference&username="+strEmailId+"&domain="+strSubDomain+".gosync.net&name=web_timezone&value='"+timeZone+"'";
                            u=new URL(strUrlTZ);
                            uc=(HttpURLConnection)u.openConnection();
                            code=uc.getResponseCode();
                              if(code != 200) {
                               rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                        } else {
                            rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                            mailUtil.sendMail_admin("Error In Creating  User for the Domain","While creating domain for "+user.getEmail()+" user could not be created due to following reason: <BR> "+response1+"<br>GoSync UserName:"+strEmailId+"<br>GoSync Password:"+strPassword+"<br>GoSync Domain :"+strSubDomain+".gosync.net and URl String was :"+strUrlUser+"");
                }

    if the problem is caching try setting the useChasses to false
    uc.setUseCaches(false);

  • Password Violation error while creating users from Admin interface

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

Maybe you are looking for

  • Photoshop cc 2014 crashes on close every time

    Every time I quit photoshop it crashes.

  • Sync date and time with NTP??

    Hi all, I'm looking to figure out how my Solaris 10 sync is date/time. I've looked in /etc/inet/ntp.conf and the file doesn't exist. I've looked at the "svc -l ntp" and here's what I got fmri         svc:/network/ntp:default name         Network Time

  • If BB sends a forgotten password to my device, WHERE can I find it?

    If BB sends a forgotten password to my device, WHERE can I find it?It does NOT got into the message box. Thanks Solved! Go to Solution.

  • Mac AppStore won't even start today!

    I was a happy user of mac appstore. I did not use it often, but from time to time. May be once a week. If I click the icon to start it, it bounces for a while, and then stop bouncing. That's all it does. See the video below. http://screencast.com/t/X

  • Change font menu source?

    In the font menu in Pages' toolbar, I see all fonts installed on my computer - even those in other scripts such as Arabic. On the other hand, in TextEdit, I see only the fonts in the "English" list in Font Book. Is there any way I can make the font m