Lead to Oppy Method call or Workflow

Hi All,
When shall we use the option of method call and workflow for automatic creation of Oppt from lead.
We can use method call and also workflow for it. but whats the pros and cons of these two methods.when do we use what.
Sanjana

Hi Sanjana
The correct (and customizable) way to do so is to use the so-called post processing framework (PPF), which exists in CRM only. In transaction sppfcadm you can define an action profile with an action which calls a COPY_DOCUMENT and passes as a parameter the opportunity process type. You then have to define a start condition (e.g. qualification status = hot) and a planning condition (e.g. status = closed) and then it runs automatically.
Please also have a look at the existing examples for the opportunity sales methodology, in standard customizing there is something similar set up between activities and opportunities.
Regards, Kai

Similar Messages

How detect method calls that are not already in 1.4

My program is compiled with JDK 1.5 or 1.6 and retroweaved to 1.4.
If I do not take care I may type
int i=65;
Character.isDigit(i);
instead of
Character.isDigit(char)i);
Without casting to char it uses a method that exists only since 1.5 but not
yet in 1.4.
There are a few other methods that had been added since 1.5
Their use leads to NoSuchMethodError on 1.4 clients.
Their usage must be avoided.
How can I recognize them at compile time?
Or has anybody written a tool to check all method calls
whether they already exist in 1.4 ?
If not I would write it myself and probably will use the javap output.
After reading through the docs of java.lang.reflect.Method I guess that
there is no flag telling when a method had been introduced.

there was some discussion on that here:
http://forum.java.sun.com/thread.jspa?threadID=586602
If you use ant, you could also try and configure the src and target properties of javac task:
http://ant.apache.org/manual/CoreTasks/javac.html
Alper

Can we call a workflow form a JSP and/or form a Java Class?

Is it possible to call a workflow form a JSP and/or form a Java Class?

Below is some xpress code I wrote once, used to dynamically lauch workflows from within a workflow. Since it basically uses java classes, you reuse these in your java program or jsp:
- create a new generic object
- call the setId, put, ... methods on it
- set the input variables for the workflow by putting them into the generic object
- call the checkinView method on a LighthouseContext object which launches your workflow.
If all you need is starting a workflow from a jsp, you might also want to take a look at the tasks/taskLaunch.jsp jsp. This is an out of the box jsp which allows launching of tasks. If I remember correctly you have to give an url parameter which specificies the name of task you want to start: tasks/taskLaunch.jsp?id=<workflow-name>
- Robin
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE TaskDefinition PUBLIC 'waveset.dtd' 'waveset.dtd'>
<TaskDefinition name="MVG_TD_LaunchWorkflow" taskType="Workflow" executor="com.waveset.workflow.WorkflowExecutor" suspendable="true" syncControlAllowed="true" execMode="sync" execLimit="0" resultLimit="0" resultOption="delete" visibility="runschedule" progressInterval="0">
     <Extension>
          <WFProcess name="MVG_TD_LaunchWorkflow">
               <Variable name="workflowName" input="true"/>
               <Variable name="taskInstanceName" input="true"/>
               <Variable name="inputs" input="true"/>
               <Variable name="processView"/>
               <Activity name="start">
                    <Transition to="createProcessView"/>
               </Activity>
               <Activity name="createProcessView">
                    <Action>
                         <block trace="true">
                              <set name="processView">
                                   <new class="com.waveset.object.GenericObject"/>
                              </set>
                              <invoke name="setId">
                                   <ref>processView</ref>
                                   <s>ProcessViewer</s>
                              </invoke>
                              <invoke name="put">
                                   <ref>processView</ref>
                                   <s>task.process</s>
                                   <ref>workflowName</ref>
                              </invoke>
                              <invoke name="put">
                                   <ref>processView</ref>
                                   <s>task.taskName</s>
                                   <ref>taskInstanceName</ref>
                              </invoke>
                              <if>
                                   <notnull>
                                        <ref>inputs</ref>
                                   </notnull>
                                   <then>
                                        <invoke name="assimilate">
                                             <ref>processView</ref>
                                             <ref>inputs</ref>
                                        </invoke>
                                   </then>
                              </if>
                         </block>
                    </Action>
                    <Transition to="checkInProcessView"/>
               </Activity>
               <Activity name="checkInProcessView">
                    <Action>
                         <block trace="true">
                         <invoke name="checkinView">
                              <invoke name="getLighthouseContext">
                                   <ref>WF_CONTEXT</ref>
                              </invoke>
                              <ref>processView</ref>
                              <new class="java.util.HashMap"/>
                         </invoke>
                         </block>
                    </Action>
                    <Transition to="end"/>
               </Activity>
               <Activity name="end"/>
          </WFProcess>
     </Extension>
     <MemberObjectGroups>
          <ObjectRef type="ObjectGroup" id="#ID#Top" name="Top"/>
     </MemberObjectGroups>
</TaskDefinition>

Secondary method call

Hello,
I encounter the following problem:
In a task I have placed a secondary method from an ABAP class. The method is a static public method and the interface IF_WORFKLOW is set in the class.
The method (modal call) does not seem to be triggered. When I replace this method with a method from a BOR-object it works just fine.
Any suggestions ?
Bert

Hi Bert,
Does it work when you put it in a normal task? I don't know if there are any prerequisites for a method to use it as a secondary method. Did you try testing the method in the workflow builder? At the Tab Methods there is a test button. Maybe this gives some more information.
Regards,
Martin

How to handle exception thrown in standard bo method in the workflow design

Hi Experts
    how to handle exception thrown from standard bo method in the workflow design. For example, bo BUS2032, METHOD confirm. If the user cancel it, it will throw exception. In the workflow, how to catch this exception and add corresponding steps in the workflow.

@jrockman li
Try to implement the logic that what ever you are performing in the BO mehtod in a FM and in the FM you have tab with name EXECPTIONS define the execption in that tab.Now in the BO method you call this FM and if the exception occurs by using RAISE you can raise the exception in the FM and based on the number of exceptions your sy-subrc value will be set
so when sys-subrc is not eq 0 then pass a value back t the workflow container., I think this will work.
a sample Snippet for understanding purpose
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename         = <path>
    filetype         = 'ASC'
IMPORTING
    filelength       = lv_len
TABLES
    data_tab         = l_txt_tab
EXCEPTIONS
    file_write_error = 1          " If this Exception occurs
    invalid_type     = 2
    no_authority     = 3
    unknown_error    = 4
    OTHERS           = 10.
CASE sy-subrc.
WHEN 1. " SY-SUBRC value will be 1 then,
      " Pass or set the value back to the workflow conatiner element
ENDCASE.

SAP WF Business Object methods call our of SAP world

Hi Guys,
I want to know if the Methods of SAP workflow business object are always only be used in tasks in the workflows or they can also be called from out of sap world??? If yes then how???
Seconly does BAPI property of the method (method property where we can provide BAPI function module) has to do with remote call for this method?? What exactly is the use of BAPI property of any method in SAP workflow business object??
Regards,
NK

Hi Naeem,
Generally we are using SAP BOBI as best BI adhoc, canned Webi report and customizing Dashboard , Crystal report preparation in Complex Billing report by using Web intelligence , Crystal report and Digital dashboard is best for KPI analysis , predictive analysis for Project , Management also .
Their flows are very simple by using specific SAP recommended Specific tool for any MIS , BSCS billing BI reports preparation that we are following in specific domain based Project.
BAPI reporting is part of ABAP reporting , that you can flow in Mr Rob statement .
Regards
Asish

Native - Java Method Call problem - "Wrong Method ID..."

I am writing a 3d game engine using c++, with all the game logic code in Java, for the purpose of making the thing extendible, easily modifyable, etc...
I am using J2SE JDK 1.2.2.
Most things work fine (engine-wise), but i have a few questions about problems i am having getting the JNI to work correctly with calls to Java Methods.
1. If I use FindClass() to get a jclass reference to a named class, I get one number back. If I then instantiate this class, and then call GetObjectClass() with the instance, I get another number, **which doesnt appear to work for anything**. What is going on here? Can the JVM give different jclass numbers for the same class? Is GetObjectClass() supposed to work?
2. Is AllocObject() alright for instantiating Java objects? It does seem to allocate memory, and method calls work to the new object. I am aware that it doesn't call a constructor, but I like that, seeing as the initialization is handled through a different [network-synchronized] means.
3. Using a jclass retrieved using FindClass(), which I store in a global variable, I am able to call methods on an instance that I created in a certain function. I then make sure (?) that the GC can't reclaim the class or object memory by getting a NewGlobalReference to both of them [just to be safe]. However, in a later function, I am unable to call methods using my stored method IDs, ["Wrong Method ID....JVM has been asked to shut down this application in an unusual manner..."]. I am also unable to acquire new methodIDs, as the system returns 0xCCCCCCCC for all method ID queries. Obviously, attempting to use those bogus method IDs results in a JVM crash, in a segment called [2 deep in the untraceable depths of JVM.dll] from the JNI CallVoidMethodV() function. Why is this happening? Is the GC getting in there despite my best efforts? Is it illegal to cache methodIDs, jclass references or jobject references? aaarrggh! :)
Thanks
Chris Forbes
Lead Programmer
Sprocket Interactive
[email protected]

Hi Chris,
I hit the same sort of problem, when writing a JVMDI ( VM debugger hook ), in C++.
My question remained unanswered too
http://forum.java.sun.com/thread.jsp?forum=47&thread=461503&tstart=30&trange=30
I didn't try a call to NewGlobalRef, as you did... but it sounds like it could be what I was missing.
I've a couple of ideas, but nothing definite for you.
1) maybe there's more than one classloader, so that multiple copies of the class are loaded
2) ensure you're compiling your DLL with "quad-word" ( 8 byte ) alignment.
Otherwise all your JNI references will be misaligned !
Since the JNI reference maps to a C++ pointer, it's possible that you can't cache any JNI references.
That's my vague feeling on the subject.
As a workaround, you may have to keep requesting any JNI references, eg. jclass & jmethod's, as you need them.
regards,
Owen

Taskflow Method call receiving null parameter.

Hi all,
I am using 11.1.1.6. I have created in my application an extra project which is pure Java objects and exposed a master class as a POJO DC. In my application, I have a taskflow where I have dragged and dropped one method from my POJO DC - 2 of the parameters of this methods are coming from an application scope bean. I have debugged the application, and made sure that the object being returned by the getter of my app scope bean is not null. So basically, when the breakpoint is in the return statement of my getter the oject is not null and it has been correctly initialized. Just after that, the next breakpoint is in the class receiving the parameter in my POJO DC class. In there, the object is NULL.
Does anyone knows wat could be the reason??

Hi Frank Nimphius-Oracle,
That is precisely the problem. The object is being passed as to the taskflow as an input parameter (getting it from my application scope bean). If I access the pageFlowScope inside my taskflow I see it and its there, correctely intialized. However, when I call a method call activity that consumes that object as parameter, all what it gets is null.
The method that consumes this object is in a separate project, and its exposed in a POJO DC. I don't know if it has to be with the complexity of the object I am passing or what but I don't understand why its not being passed correctly to the DC Method.

Closing an anonymous stream in method call

Will an anonymous stream in a method call be closed in the same manner an anonymous stream that is created in an object instantiation will be?
I know this will close the anonymous FileInputStream:
DataInputStream in =
new DataInputStream(new FileInputStream("filename.txt"));
/* ... code ... */
in.close();But will this?
MyPropertiesClass myPropertiesClass = new MyPropertiesClass();
myPropertiesClass.store(new FileOutputStream("file.txt"));MyPropertiesClass extends Properties, and uses its store().
I know the JavaDoc for Properties says:
"After the entries have been written, the output stream is flushed. The output stream remains open after this method returns."
My question is will the FileOutputStream("file.txt") be closed and garbage collected eventually after this method call because I don't have a reference to it? myPropertiesClass sticks around for a long time afterwards, will the FileOutputStream as well?
Thanks for any insight,
KJ

My question is will the FileOutputStream("file.txt") be closed and garbage collected eventually after this method call because I don't have a reference to it? > myPropertiesClass sticks around for a long time afterwards, will the FileOutputStream as well?Your only hope would be if FileOutputStream overrode finalize and closed the stream there -- but it doesn't (check the API -- finalize isn't overridden). I doubt if Properties retains a reference to the OutputStream you pass to store -- why would it need to? In any case, the bottom line is that output stream isn't being closed until your process exits.
Why not bite the bullet and rewrite that line of code so that you can explicitly close the stream?
OutputStream out = new FileOutputStream("file.txt");
try {
myPropertiesClass.store(out);
} finally {
out.close();
}It's not one line, but who cares? You could wrap it up in a short utility method:
static void storeProperties(Properties properties, String path) {...}

Using a dynamic variable in the Import command of a Method call

Hi,
I am trying to make a Method call fully dynamic.
I have found out how to make the Method name dynamic, but I am having trouble figuring out how to make the Importing statement dynamic.
in my code below:
      CALL METHOD o_main->(v_call)
        IMPORTING
          it_ekko = i_ekko.
I would like to know if it's possible to make both "it_ekko" AND "i_ekko" dynamic so I can use this same call for various tables.
Hope that makes sense...thanks for your help.
Andy

Hi Andrew,
The method call is fully dynamic; not only the parameters can be specified dynamically but also the method name.
This is a help extract:
DATA: line     TYPE c LENGTH 80,
      text_tab LIKE STANDARD TABLE OF line,
      filename TYPE string,
      filetype TYPE c LENGTH 10,
      fleng    TYPE i.
DATA: meth TYPE string,
      class TYPE string,
      ptab TYPE abap_parmbind_tab,
      ptab_line TYPE abap_parmbind,
      etab TYPE abap_excpbind_tab,
      etab_line TYPE abap_excpbind.
DATA: exc_ref TYPE REF TO cx_sy_dyn_call_error,
      exc_text TYPE string.
class    = 'CL_GUI_FRONTEND_SERVICES'.
meth     = 'GUI_DOWNLOAD'.
filename = 'c:\temp\text.txt'.
filetype = 'ASC'.
ptab_line-name = 'FILENAME'.
ptab_line-kind = cl_abap_objectdescr=>exporting.
GET REFERENCE OF filename INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'FILETYPE'.
ptab_line-kind = cl_abap_objectdescr=>exporting.
GET REFERENCE OF filetype INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'DATA_TAB'.
ptab_line-kind = cl_abap_objectdescr=>changing.
GET REFERENCE OF text_tab INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'FILELENGTH'.
ptab_line-kind = cl_abap_objectdescr=>importing.
GET REFERENCE OF fleng INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
etab_line-name = 'OTHERS'.
etab_line-value = 4.
INSERT etab_line INTO TABLE etab.
TRY.
    CALL METHOD (class)=>(meth)
      PARAMETER-TABLE
        ptab
      EXCEPTION-TABLE
        etab.
    CASE sy-subrc.
      WHEN 1.
    ENDCASE.
CATCH cx_sy_dyn_call_error INTO exc_ref.
    exc_text = exc_ref->get_text( ).
    MESSAGE exc_text TYPE 'I'.
ENDTRY.
BR,
Valentin

Error on /SafeMode: error while trying to run project uncaught exception thrown by method called

i try run VS 2012 with /SafeMode. I create new empty Winform. When I start debug, I got:
"error while trying to run project uncaught exception thrown by method called through reflection"

Hi Matanya Zac，
Did you restart your machine? How about installing the VS2012 update 4?
>>error while trying to run project uncaught exception thrown by method
Did you install the VS update in your VS IDE? I met this issue before which was related to the VS update:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5ead8ee9-ea09-4060-88b0-ee2e2044ff82/error-while-trying-to-run-a-project-uncaught-exception-thrown-by-method-called-through-reflection?forum=vsdebug
If still no help, I suggest you repair your VS, and then restart your machine, test the result.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AcquireConnection method call to the connection manager Excel connection Manager failed

I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
From the time I created the original package (when it worked fine) until now:
1) I have been using the same computer, the same login account and the same permissions.
2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
4) I can independently open the target Excel file and the template Excel files with no errors.
6) The ConnectionString has not changed. The Connnection String I am using is
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
7) Run64BitRuntime is set to False.
8) Delay Validation is set to true
9) This is not running under a SQL job
10) There are no child packages being run
I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
"Test connection failed because of an error in initializing provider. Unspecified error."
Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
Does anyone have any suggestions for me?

Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package. A summay:
Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
Package #1 and #2 are in the same project, but Package #3 is in a separate project .
I will try replacing the Excel files with new ones for Package 1 and 2.

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

What are the methods called while navigating from one applet to another one

Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.

http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100

Issue with a method call in a TaskFlow (works 2 times instead of 1)

Hi guys,
i'm using jdev11.1.1.1.2.0 and the integrated weblo or remote weblo 10.3.2.0.
I'm encountering a problem with a method call which is invoked inside a Task Flow.
Let me tell us the details of :
I'm invoking a method call which is part of a Task Flow from the backingbean of the view which is placed before the method call in the taskFlow diagram.
AN outcome String from the method of the backing bean allows to navigate to the method of the Task flow.
The method call is called and works normally BUT MY PROBLEM IS THAT THE METHOD IS CALLED TWO TIMES SO THE RESULT IS FALSE.
For information, the second time the method is called it takes care of the result when it is invoked the first time. So its parameters are updated and are a little different from the first time to the second time.
NB : This method consists of inserting a row in the database. My result is 2 rows inserted instead of one.
Thanks for help for this strange behaviour

Hi
create a temp calculated column
=IF(ISBLANK([Duration]),"",[Item Start Date]+([Duration])
and check if it's working OK
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Lead to Oppy Method call or Workflow

Similar Messages

Maybe you are looking for